Question on Authorized Selection Values in Bex

Hi experts
Heres a little background on my problem.... I am currently doing my authorization using variables and authorization only kicks in @ I_STEP = 0. Which is after the user excutes the query....
Here comes the problem... at the selection screen, the user is only allowed to see authorized organization units (0ORGUNIT) in the selection variables... but instead it is showing either all values in infoproviders or all values in the masterdata.
So knowing authorization only kick in @ I_STEP = 0, how do I only show authorized organization units in the selection variables?
Points will be given with solution (please let me know if this cannot be done)
Thanks!

Thanks Tomer! Appreciate it!
I manage to find out the implementation for this FM here.....
Re: Example code for function pls

Similar Messages

Display compounded InfoObject value in BEX selection screen

Hi people,
Problem in 7.0
I have Costcenter compounded with Plant and I am using Costcenter for Selections in the BEx varaible screen.
After running the report, in the selection screen value help, only the value of Costcenter is displayed, not the compounded value (So it becomes very difficult to identify from which plant the costcenter is from)
What should I do so that the User sees as Plant/Costcenter in the Value help?
Problem in 3.5
The above issue is not there in 3.5, but.......
I select COSTCENTER X from PLANT A and execute the report. In the report output, I do not see the records only for COSTCENTER X from PLANT A, but for COSTCENTER X from all Plants
why is this? Is it how this works or is it a bug?
Please help. I appreciate your assistance very much.
Thanks,
Shameem

Hey there,
Please understand the behaviour of compounded keys from the below notes:
1111632   Problem with text display in BEx Query Designer
1080863   FAQ: Input helps in Netweaver BI
541253    Restricting characteristics with compound characteristics
575563    Selecting filter values for compound characteristics
Hope this can help,
Diego Seben

Sort variable values in selection box in BEx web report.

Hello friends,
In my BEx web report I have cal/month selection. When I do dropdown to select values it starts with 01/1960 and I have to click 10 times to get to 01/2006, 02/2006 and so forth.
Is there a way to sort these values so I can get most current cal/month in first list?
Thanks in advance.
Regards,
BJ

I would consider changing the read mode for the dropdown box. Are all of those dates actually relevant? Check out the properties of the dropdown box in WAD.
Thanks,
Jeff

Add Exchange rate type to Selection Screen in BEx

BW Experts,
Business raised a request to add Exchange Rate Type(KURST) from TCURR table in the selection screen of BEx so that they can select the required rate and target currency for a particular key figure.
In Query Designer we can provide variable for currency by going into the context menu of key figure but not sure how to provide a variable on Currency Conversion Key.
Please suggest.
Thanks in advance.
-Bobby.

Hi there,
You could with user exit define a variable ready for imput but in step 1 prefill the variable with only those values, but this would still when the user executes when pressing F4 be able to check all that. Nevertheless that variable would be prefilled with the values you wish in user exit.
Another option is to mark 0RTYPE in RSD1 as authorization relevant and manage different authorization values for the users. This way you could when the user presses F4 see only values he/she is authorized.
Diogo.

How to refresh page after selecting value from LOV item , in a tabular form

Hi ,
I have a tabular form, which contains 2 items(columns), of type "Select List - named LoV".
Now, couple of issues here.
1.
2nd item(column) in tabular form, that LoV should get populated based user's selection value in first item LoV. So how do i refer to the value, that user selected in first item's LoV? I will have to use this reference in LoV query of my 2nd item ( on this tabular form)
2.
How can we refresh the page, when user selectes value in first item ( from LoV). As this is a tabular form, here item type is Select List, we dont have an option to pick item type as Select List with Submit. So problem is that when user selects value for item 1, refresh does not happen and item 2 LoV does not get populated as per user's selection in item 1.
Please help here. Would be really appreciated.
Thanks and Regards,
Rave.

Thanks Ben and Dan for your responses.
Ben, your solution helped me with refresh of page, as page got submitted.
This answers to my 2nd question. However, I still need to know first question, which basically is, how do i refer to the value, that user selected in first item LoV.
Issue is, I selected the value in first item LoV, it got submitted and page fot refreshed. But after page refresh, first item LoV loses its value that I had selected last time. It does not retain the selected value after refresh.
I have an unconditional process, that on every submit(refresh) of page, I set my items with their corresponding values. But problem is what do i mention there to refer to this item.
I looked in view source of my page, this item is referred as f03.
So i used "apex_application.g_f03", to set this item to its value, in my uncoditional submit process. But it did not work. I tried to refer this item as "f03" in this unconditional submit process. But still it did not help, the selected item loses its value after page refresh(submit).
Any help here would be really appreciated. Please suggest how do we refer to this item's selected value.
Thanks and Regards,
Ravi.

Automatically Selecting Values in Multiple Values Dropdown Parameters

Hi,
Is it possible to have parameter values automatically selected in a dropdown in an SSRS report? I'm using SQL Server 2008 R2 Enterprise edition. Basically what I have in mind is this: The user wants to save his parameter selections in a
table that will be available as a dropdown parameter of a report, call it
ParamUserSelection. ParamUserSelection is the first parameter of the report and other parameters depend on it.
We have two other parameters called ParamCountry and
ParamState. These are dropdown text parameters that allow multiple values to be selected. Populating the list is not a problem as I use a standard cascading parameter technique. What I'm trying to do is the following:
The user selects a value from ParamUserSelection, call it Selection1. Selection1 is stored in a table and has all the values that should be selected in ParamCountry and ParamState. In other words, it should tell these two subsequent parameters,
what values should be selected in their respective dropdowns. For example if the user selects Selection1 from ParamUserSelection, it reads the values in the database table and if it finds US and Canada for countries and CA, NY, ON for states, ParamCountry
should be populated with all the countries available in the database but should have ONLY US and Canada as selected values and ParamState should be populated with all the states in the database but should have ONLY CA, NY and ON as selected values.
If then I click on selection 2 and it has ParamCountry = US, ParamState = TX,OH in its database then again all countries and states should be in the dropdown but only US for ParamCountry and TX,OH for ParamState should be selected.
Is this possible with SSRS? I've tried using the Default Values tab with a dataset that returns all the selected values under Report Parameters Properties but this only works for the first time that I select ParamUserSelection. It appears that
if I change the value of ParamUserSelection again, the default values are not invoked.
If this is possible, please tell me how to do this as I have been struggling for a day with it.

Hi Comedian,
According to your description, you have a report with three parameters (ParamUserSelection, ParamCountry, ParamState). The available value lists of ParamCountry and ParamState are based on the selection of a value for ParamUserSelection. Now you want to
show all countries and states in their parameter dropdown list when selecting a user selection instead of only showing the cascading values. Right?
In Reporting Service, when we want a parameter to show the cascading values, we only need to set the corresponding dataset and field for Default Values in this parameter. In this scenario, if we want to show all countries and states in their dropdown list,
we just need to set another dataset for Available Values in those parameters so they can display all countries and states. We have tested your case in our local environment. Since you have done with the cascading parameters, we just give some part of steps
and screenshots for your reference:
We created two tables (dbo.Selection, dbo.states) based on your information.
Create one more dataset (named dataset2) in your report, put text below into your query:
select distinct Country from states
Create another dataset (named dataset3), put text below into your query:
select distinct State from states
Go to your ParamCountry, in Available Values, select dataset2 and Country for dataset and field.
Go to your ParamState, in Available Values, select dataset3 and State for dataset and field.
Save and preview. It looks like below:
Reference:
Report Parameters (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How to get selected value from selectOneRadio ???

Hi...i want to how to get selected value from selectOneRadio and use it in another page and in backing bean.
Note i have about 10 selectOneRadio group in one page i want to know value of each one of them.
Plzzzzzzzz i need help

You have a datatable in which each row is a question, correct?
Also in each row you have 5 possible answers that are in a radio, correct?
So,
You need to put in your datatable model, a question, and a list of answers (5 in yor case) and the selected one.
So you will have a get to the question, an SelectItem[] list to populate the radios and another get/set to the selected question.
ex:
<h:selectOneRadio value="#{notas.selectedString}" id="rb">
<f:selectItem itemValue="#{notas.valuesList}"/>
</h:selectOneRadio>
Search the web for examples like yours.

Dvt:pivotFilterBar - how to get selected values from filter

Hi all,
I have a question: how to programmatically get selected values from pivot table's filter bar?
I have tried to use
pivotTable.getDataModel().getDataAccess().getValueQDR(startRow, startCol, DataAccess.QDR_WITH_PAGE);but for page edge dimensions it returns BAD DATA, it seems that it returns some cached values.
Environment: JDev 11.1.1.3.0 without any patches.
thanks,
Miroslaw

Hi,
You can retrieve the selected value in the PivotFilterBar through the model of PivotFilterBar, instead of dataaccess:
// get the model from the pivot filter bar instance
QueryDescriptior queryDescriptor = (QueryDescriptor)pivotFilterBar.getValue();
// retrieve a list of criterion, each one is used to populate each lov within the pivot filter bar
ConjunctionCriterion conjunctionCriterion = queryDescriptor.getConjunctionCriterion();
List<Criterion> criterionList = conjunctionCriterion.getCriterionList();
for (int i=0; i<_criterionList.size(); i++) {
AttributeCriterion criterion = (AttributeCriterion)criterionList.get(i);
// _selected is the currently selected value
Object selected = criterion.getValues().get(0);
System.out.println(_selected);
Hope that helps,
Chadwick

How to get selected value from a listbox

Hi !
I use following code to fill in my LISTBOX with values :
AT SELECTION-SCREEN OUTPUT.
val-key = 1.
val-text = '0016'.
APPEND val TO list_values.
val-key = 2.
val-text = '0028'.
APPEND val TO list_values.
val-key = 3.
val-text = '0035'.
APPEND val TO list_values.
val-key = 4.
val-text = '2001'.
APPEND val TO list_values.
val-key = 5.
val-text = '0515'.
APPEND val TO list_values.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING id     = 'p_list'
              values = list_values.
My question is - how to get a selected key/text value ? i dont need it to be done dynamically - i just need it in START OF SELECTION to perform tasks.
Thx in advance.

Unfortunetly it does not work
i Define parameter as follows :
PARAMETERS:
p_list AS LISTBOX VISIBLE LENGTH 10.
Then i add values to it :
AT SELECTION-SCREEN OUTPUT.
val-key = 1.
val-text = '0016'.
APPEND val TO list_values.
val-key = 2.
val-text = '0028'.
APPEND val TO list_values.
val-key = 3.
val-text = '0035'.
APPEND val TO list_values.
val-key = 4.
val-text = '2001'.
APPEND val TO list_values.
val-key = 5.
val-text = '0515'.
APPEND val TO list_values.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING id     = 'p_list'
              values = list_values.
Then when i add a blank section :
AT SELECTION-SCREEN ON p_list.
I set a breakpoint in START OF SELECTION block - but the value is empty no matter what do i select.
Actually when i select value from the list and hit enter key on selection screen the selection in a listbox goes empty :/
Whats the cause of this ?
Edited by: Jacek Zebrowski on Feb 26, 2009 12:38 PM

Read selected values from a multi choice field programatically using Microsoft.SharePoint.Client namespace.

All examples I found refer to classes under Microsoft.SharePoint namespace. However, I have the SharePoint CSOM that only gives me the Microsoft.Sharepoint.Client namespace.
I need to read the selected values of a multichoice field, but not sure how to do it with classes in the namespace above.
everthing works, exept the TSQL_x0020_Reference_x0020_Numbe field.
my code looks like this:
Webweb = cont.Web;
            cont.Load(web);
            cont.ExecuteQuery();
Listsstest = web.Lists.GetByTitle("T-SQL
Code Review Tracking");
//CamlQuery query = CamlQuery.CreateAllItemsQuery();
CamlQueryquery =
newCamlQuery();
            query.ViewXml =
@"<View>
                           <ViewFields>
                                <FieldRef Name='Category'/>
                                <FieldRef Name='Review_x0020_Type'/>
                                <FieldRef Name='Review_x0020_Start_x0020_Date'/>
                                <FieldRef Name='Title'/>
                                <FieldRef Name='Location'/>
                                <FieldRef Name='Project'/>
                                <FieldRef Name='Author0'/>
                                <FieldRef Name='AssignedTo'/>
                                <FieldRef Name='TSQL_x0020_Reference_x0020_Numbe'/>
                            </ViewFields>
                         </View>"
ListItemCollectionitems
= sstest.GetItems(query);
            cont.Load(items);
            cont.ExecuteQuery();
foreach(ListItemitem
initems)
                Output0Buffer.AddRow();
                Output0Buffer.ReviewStatus = item.FieldValues[
"Category"] !=
null? item.FieldValues["Category"].ToString()
: String.Empty;
                Output0Buffer.ReviewType = item.FieldValues[
"Review_x0020_Type"] !=
null? item.FieldValues["Review_x0020_Type"].ToString()
: String.Empty;
                Output0Buffer.ReviewDate =
DateTime.Parse(item.FieldValues["Review_x0020_Start_x0020_Date"].ToString());
                Output0Buffer.Module = item.FieldValues[
"Title"] !=
null? item.FieldValues["Title"].ToString()
: String.Empty;
                Output0Buffer.BranchLocationURL = item.FieldValues[
"Location"] !=
null? item.FieldValues["Location"].ToString()
: String.Empty;
                Output0Buffer.ProjectName = item.FieldValues[
"Project"] !=
null? item.FieldValues["Project"].ToString()
: String.Empty;
                Output0Buffer.Author = item.FieldValues[
"Author0"] !=
null? item.FieldValues["Author0"].ToString()
: String.Empty;
FieldLookupValueflvAssignedTo =
newFieldUserValue();
                flvAssignedTo = item.FieldValues[
"AssignedTo"]
asFieldLookupValue;
if(flvAssignedTo !=
null)
                    Output0Buffer.AssignedTo = flvAssignedTo.LookupValue;
varv = item.FieldValues["TSQL_x0020_Reference_x0020_Numbe"];
if(v !=
null)
                    Output0Buffer.Reason2 = v.ToString();
             Output0Buffer.SetEndOfRowset();

Hi,
According to your description, my understanding is that you want to read the selected choice field value using Client Object Model.
In my environment, I create a list with a mutichoice fileld named "choice" and then I used the code snippet below to get the selected value in choice field.
ClientContext clientContext = new ClientContext("http://sp2013sps/sites/test1");
Microsoft.SharePoint.Client.List spList = clientContext.Web.Lists.GetByTitle("list1");
clientContext.Load(spList);
clientContext.ExecuteQuery();
if (spList != null && spList.ItemCount > 0)
Microsoft.SharePoint.Client.CamlQuery camlQuery = new CamlQuery();
camlQuery.ViewXml =
@"<View>
<ViewFields><FieldRef Name='choice' /></ViewFields>
</View>";
ListItemCollection listItems = spList.GetItems(camlQuery);
clientContext.Load(listItems);
clientContext.ExecuteQuery();
string value = listItems[0]["choice"].ToString();
Console.WriteLine(value);
Console.ReadKey();
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Pass selected values from a checkbox

hello everybody
i was looking for a similar thread but i couldn't find the answer i'm need, so here's my question.
i have an checkbox populated from a dynamic LOV. it is showing me the correct values, but i haven't been able to receive the selected values on the other page. i always receive the first value.
For example
My options ar: code 1
code 5
code 9
code 10
When I checked 5 and 9 and submit the page (i submit the page to itself), my the values in the URL are siomething like '....%2C5:9', but the only checked value is 5.
How must i send the values to receive them in the correct way? I tried 'checkbox' and 'multiselect list' and they had the same behaviour.
Thanks in advance.
Daniel.

Hi Daniel
This happens because : (colon) is used to separate parameters in the URL as well.
To solve it, I used the following code in a after submit computation on the checkbox field:
replace(:p500_checkbox, ':', '|') -- value becomes 1|2|3|4 (URL friendly)
Then in a before header computation:
replace(:p500_checkbox, '|', ':') -- value goes back to 1:2:3:4
It worked well, though I am sure there must be a more intelligent way to do it...
Luis

Prompts visible on basis of the selected value of initial prompt

I have some reports in which multiple queries option is provided at UI by using no of prompts.. Now some of the prompts are visible on basis of the selected value of initial prompt. That means If value of prompt A is x than prompt B is displayed and if value of prompt A is y than Prompt C is displayed, which of the prompt(B or C) is displayed depends on value of prompt A.
how can we achieve this.Kindly help!!

Please post this question in the CRM On Demand Analytics and Reports forum. Thanks for your help.

Analysis authorization - Authorizing Characterstic Values

Hello all,
We upgraded to BW (BI) 7.0 and thus have to use the new analysis authorization concept. While I have the documentation on how to create them and understand the, I'd like to know if there are any experienced users or experts who can assist.
I have Marc Bernand's PowerPoint "An Expert Guide to New SAP BI features" and while they say that there is an "all or nothing rule" for viewing the query results, with the exception being for key figures and hierarchies, in the presentation (pg 21), it outlines that specific sales orgs can be assigned to the analysis auth (authorizing characteristic values) - this appears to contradict the 'all or nothing' rule if more than these sales orgs are in the query result.
However, when I tested something similar in our dev environment for company code, if a specific company code is listed in the analysis auth (for the applicable characteristic), when I execute the report, I get a "you are not authorized", which is consistent with the new concept.
My main question is that in order to restrict on specific company codes, plants, etc, are the choices to either use a hierarchy or a customer exit? Restricting it by assigning the values for the characteristic won't work. Thanks in advance for any help you can provide.
Any help would be GREATLY appreciated.

Hello Julie,
It is not necessary to use Hierarchy or customer exit inorder to restrict the access based on company code.
1. First of all make, Company code as authorization relevent in IO settings
2. In RSECADMIN, create one authorization object. It is a good practice to include all SAP Technical objects also. Just click on Inster special characts.
3. For the company code assign required value.
4. Assign this authorization to user in USER tab
5. In the report, If you want to defualt the value of company code, create one authorization relevent variable for company code. You can make this variable as ready for input/Not ready for input.
6. Execute the report.
The user will only get data related to authorized company code.
Regards,
Ravindra

Variable entry screen for query doesnt show selection values.

Hi,
I've created a query with date varibale Quarter From-To. When i execute this query, the variable entry screen pops up but when i try to select values just shows ??? and not the text.
if i run the same query in RSRT the variable entry screen pops up but here the selection values are present for me to choose from.
can anyone tell why the values arent showing when the query is executed.
Thanks

yes, it seems to be a problem with NetWeaver BI BEx Java Web runtime as it works in RSRT and web analyzer. Found a note on marketplace note 125357 - No values displayed for attributes in input help but this did not resolve issue.
A call has been raised now as it seems to be a product fault

Input of Multiple values in BEX Browser

Dear All,
Can I input multiple values i.e Can I copy values from a excel or a data base which are at random and paste in BEX Browser as a input variable. is there any way to do this operation.
Note:- Values need not be in series as stored in table.

Hi Abhijit,
I hope u are asking about input multiple values in data selection of the Query (Infact at selection screen, where u input the value for the query).
Well u can do this if u are using BW3.5 or Above. What u need to do is copy all those selection values from Excell sheet then at selection screen u have to there is a button of multiple copies which will suck values even more than 12 in numbers.
This functionality is perticularly benefial when u want to check the status BW for randon numbers of document numbers.
Hope this works for u.
Kindly assign the points if u feel this solution workable for u.
Regards.
Sunil Tayade Alias Sun Raj .

Question on Authorized Selection Values in Bex

Similar Messages

Maybe you are looking for