Question on passing parameters between 2 pages in a BSP application

Hi Group,
I have defined a page attribute "zcid" in both the pages where I need this attribute value. And in one page I calculated a value and assigned it to this attribute. And also I checked the attribute as "Auto" in both pages.
And I used navigation->set_parameter( name = 'zcid' and value = zcid ), I was getting an error saying, use "." after name and not proceeding any further.
Please let me know the procedure for accessing a value of an attribute in Multiple pages within a BSP application.
Thanks in advance.
Regards,
Vishnu.

Hi Vishnu
To pass the parameter,
Firstly the name of attributes should be same of both pages and the check of AUTO should be checked on target page.
I am giving you small example to pass the Firstname parameter from Default.htm to Result.htm .
the Parameter name in Default.htm is --> fname type string.
--> Auto should not check
the Parameter name in Result.htm is --> fname type string.
--> Auto should be checked.
in Default.htm inputprocessing use the code
navigation->set_parameter( 'fname' ).
navigation->next_page( 'TORESULTS' ).
or
For more detail you may also go through the following links
/people/raja.thangamani/blog/2006/12/26/bsphow-to-navigation-between-bsp-applications-part-i
/people/raja.thangamani/blog/2007/01/05/bsphow-to-navigation-between-bsp-applications-part-ii
If this will helpful please reward the points
Kuldeep Verma

Similar Messages

Using Server Side Cookies between pages of a BSP application

Hi,
I have Page1 which will retrieve some data into a internal table. Once user performs an action I want to set a server side cookie in Page1 and then retrieve that cookie with data in Page2 of the same BSP and display it?
Is this possible using set/get server cookies?
Thanks
Kiran

Hi Kiran,
Yes, you can.
Basically, you set a server-side cookie in the event OnInputProcessing of Page 1 (or the MVC equivalent) :
cl_bsp_server_side_cookie=>set_server_cookie(
exporting
    name = 'TEST'
    application_namespace = 'NONE'
    username = 'NONE'
    session_id = 'NONE'
    data_value = <your_data_here>
    data_name = 'NONE'
    expiry_time_rek = 3600 ).
And, you retrieve this information in the OnInitialization event of Page 2 :
cl_bsp_server_side_cookie=>get_server_cookie(
exporting
    name = 'TEST'
    application_namespace = 'NONE'
    username = 'NONE'
    session_id = 'NONE'
    data_name = 'NONE'
IMPORTING
    expiry_date = w_date
    expiry_time = w_time
CHANGING
    data_value = <your_data_here> ).
Best regards,
Guillaume

Pass parametrs between pages

Hi,
how can I pass parameters between pages, WITHOUT using a Session bean?
I mean: I need to use a Link Action component to pass control to another page (using the page navigation feature) and, along with the request, also pass the Id of the clicked image.
Can I do this using a JSF/Creator feature?
(without using a link like "NextPage.jsp?id=234")
thanks a lot

Runak,
I have a question about this. On the faqs link you supplied there is a document:
How can I pass data between pages without creating SessionBean variables in Creator?
I have this problem a lot:
Now if a variable is passed to Page2 from Page1 that is fine but as soon as you press a button or other. That variable is gone when the constructor is loaded again.
What work around would you suggest?, passing a varable from Page2 to Page2 dosen't seem to work.
I use Hidden Fields, but surely theres a better way.
Regards
Jonathan

Urgent! pass parameters between jsp pages

Does anyone can give an example about how to pass parameters between jsp pages?
This is what I do:
pageContext.forward("pag_loginc.jsp?p_idusr=" + strUsr + "&c_password=");
But when deployed is not working.
Help is needed.

can you put that stuff in the session context in the first page, then pull it out in the second page?

OBIEE 11G - Issue passing parameters between two reports

Hi folks,
I am struggling to pass parameters between two reports in OBIEE 11G.
My first report contains the following columns: Rolling Year Type (VCHAR), Year(VCHAR), Month(VCHAR), Cost(Double).
My second report contains the following columns: Rolling Year Type(VCHAR), Year(VCHAR), Month(VCHAR), Category(VCHAR), Cost(Double).
My requirement is to pass the Rolling Year Type, Year and Month values from report 1 to report 2.
On the Month column properties of report 1, I have created an Action Link called 'Drill to Category'. I have clicked on 'Navigate to BI Content' and selected Report 2.
Then on Report 2, I have included three filters: Rolling Year Type is prompted, Year is prompted, Month is promted.
When I run the report I always get the following error:
The specified criteria didn't result in any data. This is often caused by applying filters and/or selections that are too restrictive or that contain incorrect values. Please check your Analysis Filters and try again. The filters currently being applied are shown below.
When I check the cursor cache, the filter values are correct. Does anybody have any idea why Report 2 does not display?
When I remove the Month filter, the report works correctly.
I have since changed the third filter to be Month No and although Report 2 does display, it does not pick up the filter on the Month No.
I initially thought this may have been a caching issue and so I have disabled BI Server Cache but this does not fix my problem.
This was never an issue on OBIEE 10G as I found it very easy to navigate between two requests.
Has anyone else experienced problems with passing parameters between two request in 11G?
Any help appreciated.
Thanks
Gavin

Hi,
I once tried this kind of requirement(with dashboard prompts though) and hit at similar issue. I later found out that the problem is with the space in the parameter values. Can you please let me know, if the same is the case with you?
Suppose the parameter passed is "Jan 2010", but the report on the destination takes the value as "Jan" & "2010". Yes, it kind of split the parameter value to two based on space. I think we can notice the filters the destination report got, by enabling filter view.
In this case, since you pass only value at a time, could you try placing the parameter value anyway in double quotes? I think the Server then will understand it as one value.
Thank you,
Dhar

Passing parameters between views in different Web Dynpro applications

Hi everyone,
I would like to pass the value of one parameter between one view in a webdynpro application and another view that is in other webdynpro application. How can I do this in a secure way?

Hi,
Check below links for passing parameters between two applications:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b083f76a-708c-2b10-559b-e07c36dc5440
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/91b6ad90-0201-0010-efa3-9626d2685b6e
Re: Pass parameters via POST in WDPortalNavigation.navigateAbsolute method
Regards,
Anagha

How to pass Parameters between two forms

im trying to do this but i could not find any way for this.
can any one help me how can i pass parameters between two forms
in forms4.5. any help will be appreciated
thanks.
null

Global variables can be used, but you can do what the online help
says ...
Parameters are passed to called forms by means of a parameter
list. A parameter list is a named programmatic construct that is
simply a list of parameter names (called keys) and their values.
You can pass parameter values to forms invoked by the built-in
subprograms CALL_FORM, OPEN_FORM, and NEW_FORM. In addition, you
can pass parameter values to other Oracle tools with the
RUN_PRODUCT procedure.
A parameter you include in a parameter list can be either a text
parameter or a data parameter. The parameter type determines how
its value is interpreted.
Text Parameters The value of a text parameter being passed to a
called product is a CHAR string that can represent the following:
n a user-defined form parameter defined in a form invoked
by the CALL_FORM, OPEN_FORM, or NEW_FORM built-in subprograms
n a command line or user-defined parameter for a product
invoked with the RUN_PRODUCT built-in subprogram
Data Parameters The value of a data parameter being passed to a
called product is always the name of a record group defined in
the current form. (A record group is a data structure that
stores records derived from a query or through programmatic
assignment.) Data parameters are used to pass data to products
invoked with the RUN_PRODUCT built-in subprogram. You cannot
pass data parameters to forms.
The following table shows the structure of a parameter list that
contains four parameters:
Key Paramtype Value
CITY Text_Parameter 'BOGOTA'
CATEGORY Text_Parameter 'EXPORTS'
MULTIPLIER Text_Parameter '.0275'
NEW_DATA Data_Parameter 'RECORD_GROUP8'
arun reddy (guest) wrote:
: im trying to do this but i could not find any way for this.
: can any one help me how can i pass parameters between two forms
: in forms4.5. any help will be appreciated
: thanks.
null

Trying to pass parameters between GUI classes and methods

Hi All.
I have been working on a rather large final year project in college and it is getting close to the deadline. It looks as though I need to "tidy up" my code as it contains too many static methods, variables and other bad programming habits. My package consists of many different GUI's and classes. Up until now I have been calling different GUI's with guiName.NameOfMethod. I have been told this is bad practice so I am trying to fix this. Also instead of passing parameters correctly I have been creating static variables in my main class and using them. So for example if one class needed to pass a variable to the other I would first myGlobalVariable = X; in the first class. And then the second class can use this. This is also bad, right?
So I guess im really just looking for a good example or tutorial on how to pass parameters between classes and methods, GUI if possible. Here is an example of how my GUI classes look:
public class anotherGUI extends JFrame implements ActionListener {
        private JTextField a, b, c;
        private JButton button1, button2;
        JPanel p, p1;
        public anotherGUI() {
            LayOutAnotherGUI();
            setLocationRelativeTo(DnDMain.pictureArray[a]);
            setTitle("Example");
            setVisible(true);
            pack();
        private void LayOutAnotherGUI(int c) {
     //GUI is layed out here
        public void actionPerformed(ActionEvent e) {
            Object source = e.getSource();
            if (source == submit)
                clickOK();
        public void clickOK(){
            //Here is where I have been accessing and modifying static global variables. (But this needs to change).
public void showanotherGUI() {
        new anotherGUI();
}This is more or less how I have been going about creating my GUI's. These are used as pop ups. The user enters a value and then it is closed.
To be honest I have been able to pass a variable correctly from one class to a GUI class but I have still having difficulty. For example in my code above I can pass the variable into this class but I cannot pass it into clickOK(). An this is where it is needed.
Can anyone please help?
I hope I have explained my problem well.
Thanks in advance.

I dont think that is what I need. An example of what I do in my program is:
I have a main GUI with an array of images. There are a number of other small GUI's that appear for certain functions when the user clicks on an image or does some other function. I am trying to pass a value into the GUI class that is used for the smaller "pop up" GUI. So lets say the user has clicked the image in array[12]. Then a GUI is displayed. I need to pass the integer 12 into this class.
Thanks.

How to pass parameters between main and sub vi during parallel execution using the VI server technique?

Hello All,
I am working with the following example (from previous postings on this
board) that demonstrates how to run a sub vi in parallel with the main
vi. I'd like to pass parameters between the main and sub such as
the control (delay) and indicator (value) parameters of my subvi
example. Does any one know how to do this? Parallel
execution is important for me, I cannot just paste the subvi icon into
my main diagram (two nested while loops...)
Many thanks,
Luis
Message Edited by cascao on 08-16-2005 08:42 PM
Message Edited by cascao on 08-16-2005 08:42 PM
Attachments:
VI_Server_technique.vi ‏32 KB
SubVI_1.vi ‏19 KB

cascao wrote:
Hello All,
I am working with the following example (from previous postings on this
board) that demonstrates how to run a sub vi in parallel with the main
vi. I'd like to pass parameters between the main and sub such as
the control (delay) and indicator (value) parameters of my subvi
example. Does any one know how to do this? Parallel
execution is important for me, I cannot just paste the subvi icon into
my main diagram (two nested while loops...)
Many thanks,
Luis
Luis, you can use the VI Server methods 'Set Control Value' and 'Get Control Value', as demonstrated in the attached examples.
-Franz
Attachments:
VI Server.zip ‏26 KB

How to pass parameters between two xterm windows?

Hi,
I would like to know how to pass parameters between two xterm windows where there are two independence processes running on them respectively ? Would appreciate if any one out there can advise me . Thanks.

Global variables can be used, but you can do what the online help
says ...
Parameters are passed to called forms by means of a parameter
list. A parameter list is a named programmatic construct that is
simply a list of parameter names (called keys) and their values.
You can pass parameter values to forms invoked by the built-in
subprograms CALL_FORM, OPEN_FORM, and NEW_FORM. In addition, you
can pass parameter values to other Oracle tools with the
RUN_PRODUCT procedure.
A parameter you include in a parameter list can be either a text
parameter or a data parameter. The parameter type determines how
its value is interpreted.
Text Parameters The value of a text parameter being passed to a
called product is a CHAR string that can represent the following:
n a user-defined form parameter defined in a form invoked
by the CALL_FORM, OPEN_FORM, or NEW_FORM built-in subprograms
n a command line or user-defined parameter for a product
invoked with the RUN_PRODUCT built-in subprogram
Data Parameters The value of a data parameter being passed to a
called product is always the name of a record group defined in
the current form. (A record group is a data structure that
stores records derived from a query or through programmatic
assignment.) Data parameters are used to pass data to products
invoked with the RUN_PRODUCT built-in subprogram. You cannot
pass data parameters to forms.
The following table shows the structure of a parameter list that
contains four parameters:
Key Paramtype Value
CITY Text_Parameter 'BOGOTA'
CATEGORY Text_Parameter 'EXPORTS'
MULTIPLIER Text_Parameter '.0275'
NEW_DATA Data_Parameter 'RECORD_GROUP8'
arun reddy (guest) wrote:
: im trying to do this but i could not find any way for this.
: can any one help me how can i pass parameters between two forms
: in forms4.5. any help will be appreciated
: thanks.
null

How to call BSP pages from a BSP application of another package

Hi,
I have a BSP application in one package and I want to call pages from another BSP application in a different package.
Is it possible? How it would have to do it?
Thanks in advance
Regards

Hi,
You cannot call a page fragment in a seperate window or seperately in the same window...
Page fragment is used only for including a fragment in your page....
It is not a seperate page..!
To call a page fragment, you have to use the include directive...
eg :
<%@include file="Carrier_report_logo.htm" %>
Hope this helps.
<b><i>Do reward each useful answer..!</i></b>
Thanks,
Tatvagna.
Message was edited by:
Tatvagna Shah

Difference between BSP_WD_CMPWB and SE80/BSP Application

Hi Guys,
This is related to SAP CRM Module.
Can somebody tell the difference between BSP_WD_CMPWB and SE80 / BSP Applications.
Also can somebody give the tutorial for BSP_WD_CMPWB.
Thanks,

post this in CRM web forum at
SAP CRM: Interaction Center

Help needed in passing parameters between custom pages

Hi,
Thanks in advance for your help gurus. I am developing 2 new pages and both should have link between them. WHen I click a button on page A it will navigate to page B, I am passing 2 parameters to page B. Page B is rendered with the help of values passed. Page B has 2 OAMessageLovInput Bean for which I am setting their values based on the values passed using
OAMessageTextInputBean custBean = (OAMessageTextInputBean)webBean.findIndexedChildRecursive("CustID");
custBean.setText(pageContext.getParameter("customerid"));
Everything works great till now. Now I want to change the customer id on page B using the LOV ie I select a new customer and I tab out of the field, still the customer id is not changed, it is set to the old one only to which the bean is set to.
What should I do get the new selected customer id to be populated on the LOV fields.
Thanks,
newbie

newbie,
You really do not need to explicitly set the customer Id through code. Just create a new LOV Mapping and make its return value to the MessageTextInputBean i.e CustID on base page and Lov Region Item would be the CustomerID of the Lov Table region.
Create Custome ID in LOV Table region and set its render property to false. I am assuming that the custId is present in the LOV VO query.
Thanks
--Anil

Passing parameters between portlets with in the same page

Hello,
I have created a Form and a report. The form allows a user to make some selection values, and then upon submit it passes the selected values to the report to query the database. The results from the query are displayed in a new - seperate - window from the form. Is there anyway to disaply the report results on the same page as the form that called the report? I guess I am trying to have a page with 2 portlets (a form, and a report). I want the user to be able to make a selection from the form portlet and pass that selection to the report portlet within the same page.
Thanks,
McKell

Hi I received this info from an OSS named Mahantesh. I thought it was very helpful information for passing portlet parameters between a form and a report within the same page.
Please check these steps to pass parameter from form to report:
This article is based on demo tables EMP and DEPT.
1. Create a report RPT_DEPT using the query 'Select * from dept where deptno= :deptno'
2. Create a form FRM_EMP based on EMP table.
3. Edit the form FRM_EMP => 'Formatting and Validation Options' section => click on DEPTNO field
=> Give the value for the 'Link' (under 'Display options') as 'javascript:runrep()' where runrep is the name<br>
of javascript function that we are going to create later.
4. In 'Form text' section, in the 'Footer Text' add the code for the runrep function as follows.
<script>
function runrep()
var formObj = document.forms[0];
var deptno;
for (var i=0; i < formObj.length ; i++){
if (formObj.elements.name == 'FORM_EMP.DEFAULT.DEPTNO.01'){
//FORM_EMP is the form name
deptno = formObj.elements[i].value;
break;
var url="/portal/page?_pageid=38,1,38_31678:38_31787&_dad=portal&_schema=<br>
PORTAL&deptno=" + deptno;
//modify the url according to your environment.<br>
window.location=url;
}<br>
</script>
5. Modify the URL in the above code with your page url on which form and report portlets have been placed.
6. Goto Page properties => Parameters tab (Parameters and Events option should have been enabled at Pagegroup level).
7. Create a page parameter and map it with report portlet parameter.
8. Now run the page, enter deptno or query the form to get the deptno and click on the link next to deptno field. You should get report with corresponding deptno on the page.

Passing Parameters between 2 Portlets on 1 Page

Hi,
I'm new to this portlet stuff and I might miss something important, but:
I "just" want to send parameters from one form on one Page to a portlet on the same page...
PassAllParameters is already set to true...
I also have read the "Primer" and the "Adding Parameters and Events to Portlets", after giving up to do this my own, I just copied and pasted the Name/Age Form JSP (nearly... I've made Java out of it...) as my DataProvider Portlet and copied and pasted the "Generic Public Parameter Receiving Portlet" as my DataReceiver Portlet... the Event and Parameter Tags are NOT missing in the provider.xml... but even after pressing submit there are no parameters at all avaible for the "receiving Portlet"!!!
PLEASE can someone tell me what I am doing wrong?!?!?!?

Hi friends,
I worked with the application which is in
http://server:port/jpdk/providers/event. is working fine with passing parameters to another page.
Also I create my own application which is working fine if i have the 2 portlets in the same page.
But it is not working with portlets in different page. On clicking the link it is not going to the another page. Hereby i give the required codes.
portletpass.jsp:
PortletRenderRequest prr = (PortletRenderRequest) request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
String eventSubmit = EventUtils.eventName("submit");
String eventParamsno = EventUtils.eventParameter("sno");
String strsno="50" ;
NameValuePair[] linkParams = new NameValuePair[2];
linkParams[0] = new NameValuePair(HttpPortletRendererUtil.portletParameter(request, eventSubmit), "");
linkParams[1] = new NameValuePair(HttpPortletRendererUtil.portletParameter(request, eventParamsno),strsno);
<a href="<%=PortletRendererUtil.constructLink(prr,
prr.getRenderContext().getEventURL(), linkParams, true, true)%>"><%= strtitle %>
</a>
provider.xml of portletpass.jsp:
<event class="oracle.portal.provider.v2.DefaultEventDefinition">
<name>submit</name>
<parameter class="oracle.portal.provider.v2.DefaultParameterDefinition">
<name>sno</name>
<displayName>sno</displayName>
</parameter>
</event>
portletreceive.jsp:
PortletRenderRequest prr = (PortletRenderRequest) request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
//      String snosp = "sno", snorec="" ;
//     String values = prr.getParameter("sno") -------returns null
     String values = prr.getParameter("_page_url");
     String snorec = values.substring(values.lastIndexOf("sno=")+4) ;
     out.println(snorec); // here i get the required value
provider.xml of portletreceive.jsp:
<inputParameter class="oracle.portal.provider.v2.DefaultParameterDefinition">
<name>sno</name>
<displayName>Input Parameter #1</displayName>
</inputParameter>
Also i did the necessary changes in parameters and events tab as well.
I cant sorted out what is the mistake i did.
The scenario i need is on clicking the link it should display the details in a new page.
Can anybody please help me.
Thanks in advance
Durai

Question on passing parameters between 2 pages in a BSP application

Similar Messages

Maybe you are looking for