Question regarding all the x58 Pro-e and memory problems

I've notice a serious amount of issues when it comes to people not seeing all of their RAM or not getting triple-channel status.
Before I even post my issue, I was wondering if there is a general fix for everyone experiencing these problems, because it seems I'm have the exact same issue as everyone else.

Oh well. Its basically like I said - its the same problem most other people are having. I have 6 GB of DDR3 RAM but only 4 GB ever shows up. And it shows in Dual channel mode, when everything should be triple channel 3 x 2GB. First, here are the specs for my system, which was just recently purchased.
Model of the motherboard: MSI X58 Pro-E LGA
Model of the memory: G.SKILL 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Triple Channel Kit
Model of the CPU: Intel Core i7-930 Bloomfield 2.8GHz LGA 1366 130W
Model of the GPU: SAPPHIRE TOXIC 100282TXSR Radeon HD 5850 1GB 256-bit GDDR5
Model of the HDD: Western Digital Caviar Black WD1001FALS 1TB 7200 RPM SATA 3.0Gb/s
Model of the PSU: CORSAIR CMPSU-750TX 750W ATX12V / EPS12V
Type of Operating System: Windows 7 Home Premium 64-bit
I have tried everything. I've updated the BIOS, I've tested each stick, I've even RMA'd the board itself, but to no avail. I have 3 sticks of RAM in each of the DIMM_A slots. Each stick is 2 GB each, but the POST never counts more than 4 GBs. I've tried adding in the sticks each one at a time in different slots; in different combinations, but nothing is working. I know the sticks work and I know the board is reading them because they show up in Memory-Z in the BIOS and in fact, in a 3rd party program called Speccy, it shows 6GB! But it still says they're running Dual channel mode.
Here is the current BIOS I am running as shown in the POST output and model of the memory as shown on the sticker AND the model of the motherboard itself:
BIOS: A7522IMS V8.10 030910
RAM MODEL NUMBER: F3-10666CL9T-6GBNQ | DDR3-1333 CL 9-9-9-24 1.5v | PC3-10666 2GBX3 | 10060840076833
MOBO MODEL NUMBER: MS-7522 | VER: 3.1
Those are exactly what are printed on the label/sticker letter-for-letter.
Quote from: HU16E on 04-April-10, 09:18:47
Buy the correct RAM, don't bend any CPU socket pins, install the sticks in the correct slots, don't buy into the RAM makers claims of 'rated' performance.
You're either implying that I've incompetently bent a socket pin when I installed the CPU, placed the RAM in DIMM slots they don't belong or need to trash the $200 RAM I've just purchased.
Ok, assuming that ISN'T the case, what exactly are you suggesting thats supposed to be of help? You say "Buy the correct RAM" but you don't tell me what the 'correct' RAM is.

Similar Messages

2 questions for all the iTunes PROS out there

I currently have the latest itunes software. I have recently formatted my pc, and need to add all my songs back into the itunes library. I have over 7000 songs all in the general folder
"Music". I do to File->Add folder to library->Then select that folder. It works for a bit scanning though files asks me to convert some, then it just crashes..... It would take me soooo long to do this folder by folder, does any1 know what is going on?
Since i have formatted my pc, when i plug my ipod in it says that it has been synced up to another itunes would i like to delete it all, any way around this? Or maybe can i somehow sync my ipod to my itunes, thus fixing the problem in my first question?
Thx soo much for any help
Myles

"Since i have formatted my pc, when i plug my ipod in it says that it has been synced up to another itunes would i like to delete it all, any way around this?"
When your iPod is set to update automatically you just need take care when connecting back to your computer and an empty iTunes. When you get the message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and continue to use your iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button: Managing content manually on iPod
You can also use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on Windows with iTunes 7 installed hold down the Control and Alt keys (or Shift + Ctrl keys in older versions). This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer: iTunes 7 Keyboard Shortcuts for Windows
"Or maybe can i somehow sync my ipod to my itunes, thus fixing the problem in my first question?"
If you have any iTMS purchases the transfer of purchased content from the iPod to authorised computers has been introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
The transfer of non iTMS content such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there is a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows. The procedure is a bit involved but if you're interested it's posted in this thread: MacMuse - iPod to iTunes
If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. This is just a selection, you'll find that they have varying degrees of functionality and some will transfer movies, videos and photos as well. Have a look at the web pages and documentation, they are generally quite straightforward. You can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
YamiPod Mac and Windows Versions
iGadget Windows Only
iPod Access Mac and Windows Versions
PodUtil Mac and Windows Versions
iPodCopy Mac and Windows Versions
PodPlayer Windows Only
CopyPod Windows Only
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync again.

TS4088 why is there a limit on 3 years? it should be all the MacBook Pro mid 2010 with symptoms, there should get their logic board changed for free, mine mac is 3 month late and i had this problem for over a year, but i first saw this article today :(

it should be all the MacBook Pro mid 2010 with symptoms, there should get their logic board changed for free, mine mac is 3 month late and i had this problem for over a year, but i first saw this article today

Hey Clintonfrombirmingham
I called Apple technical support in Denmark, but with no positive reply.
She couldn't do anything, and said that They had sent a recall Email about the problem and with their offer to repair the Macbook Pro, but I'd never recieved an Email about the problem. She wasn't in power to make an exception. It can't be true that i paid a lot of money, for a product that can't barely stand on its own feets, Apple didn't tell me that the product I was about to buy, would restart every 5 minute. and now when they know the problem, they wont repair it? it just don't make sense for me. If a car seller discovers that all the brakes in a car he had sold, will crash after some years he will call all the cars back to repair no mater what. i just don't understand how Apple will make good service for their custumers, by extending the warranty from 2 to 3 years, but wont take the computers there is a little bit to old, 4 months will make the difference. i can't believe it.
What can i do now?
best regards Oskar

Cant start up on my Macbook pro. All I get is a grey spinning wheel. Tried all the Startup key combinations and nothing works. I reset the NVRAM and nothing. I booted with start up disk , ran disk repair and all is ok. Tried to re-install OS but when I ge

Can not start up on my Macbook pro. All I get is a grey spinning wheel. Tried all the Startup key combinations and nothing works. I reset the NVRAM and nothing. I booted with start up disk , ran disk repair and all is ok. Tried to re-install OS but when I get to designating drive its blank. When I go to startup disk there is a "?" mark. When I restart under startup disk search for a drive it still comes up with nothing. Before I got the grey spinning wheel I had a locked screen. Could not move curser or click on anything. Finally just shut down. Thank you in advance for any help!

Shouldn't still have a 'beachballing'... if the drive is being found and the system is trying to boot from it but is having problems, I would suggest looking over ds store's user tip - Step by step to fix your Mac.
It's likely either something corrupt in your system files or a failing hard drive. But follow ds's steps until you find the cause of the problem.
Good luck,
Clinton

My early 2011 MBP 13" does not recognize my Sandisk 16GB 45MB/s Extreme Pro SDHC card. I went to the Genius Bar and we tried it in all the MacBook Pro's in the Apple Store and NONE could recognize the card. However, iMacs did. Any suggestions?

My early 2011 MBP 13" does not recognize my Sandisk 16GB 45MB/s Extreme Pro SDHC card. I went to the Genius Bar and we tried it in all the MacBook Pro's in the Apple Store and NONE could recognize the card. However, iMacs did. Any suggestions? Genius behind the Bar suggested wait for LION OS X release...

You really don't need to post multiple times, you will get attention eventually.
Find the reply here:
MacBook Pro 13 (MBP 8,1 random restarts)

I have an email account on qou but all the incoming emails subject and body appear as question marks, why???

I have an email account on QOU (al-quds Open University) but all the incoming emails subject and body appear as question marks, why???

Try to set the Boolean pref gfx.font_rendering.directwrite.use_gdi_table_loading to false on the about:config page.
*http://kb.mozillazine.org/about:config
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"

HT204266 I want to buy the Craigslist pro app and when I sign into iTItem as described and fast shipping! Aunes with my Apple ID and password ( both of which I know) it then asks security questions that I never chose ( or are even options to chose) in my

I want to buy the Craigslist pro app and when I sign into iTItem as described and fast shipping! Aunes with my Apple ID and password ( both of which I know) it then asks security questions that I never chose ( or are even options to chose) in my profile.

If you don't know their answers then if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page should let you reset them : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

Emergency questions exporting for dvd studio pro (ntsc and pal)

Hi,
I'm under a tight timeline and would appreciate any help possible. I'm experimenting with outputs/burning today so the real thing can happen tomorrow.
I have an hour long project that was shot on two different kinds of cams -- a sony hdv V1U and pan dvx100b. The first shot mostly in 16:9, the second squeeze 24p. We imported all footage as non-hd though, because the V1u has had problems syncing properly with hd settings with final cut. The issue/question now is this-
I don't know what file format (I'm assuming mpeg-4 for DVD studio pro, but using compressor or no?) or settings to use -- I'm used to mpeg-4, but for some reason it is coming out all grainy/pixelated and I'm not sure if I need to adjust the settings. Also, once exported into a usable/high quality format, I need to burn a ntsc dvd but also a pal dvd -- I've burned pal dvds on dvd studio pro before and know adjusting the settings is just in preferences, but I'm assuming the video will need to be converted into a different kind of file. Or no?
My sequence settings are 1440x1080 (16:9), quicktime video settings compressor hdv 1080i60. When I export as a quicktime file the conversion is great and no problems, but that isn't workable in dvd studio pro.
I would appreciate any advice you could offer,
Thank you,
Tenzin

Thank you, I'm trying that -- someone else just mentioned it needing to be an mpeg 2 file as well. The trouble I'm having now in compressor is it isn't converting when I press submit -- nothing is showing up in the batch monitor. I've tried this directly exporting from fcp using compressor, as well exporting quicktime from fcp and then using the quicktime file in compressor.
I'm not used to using compressor so I'm thinking I am not doing something properly in this process? Thank you for the suggestions, they are reassuring. Do you know if the same file produced by compressor can be used for the pal dvd?

When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the o

When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the original in my work folder. I need to know how to stop this from happeing and get it back to the way it has been working he last 6 months since i purchased this program.

Hi pissedadobeuser,
Does this issue occur with any particular web page?
Are you able to print the webpage to 'Adobe PDF' to convert it to pdf.
Which Browser version, OS version and Acrobat version are you using?
Regards,
Rave

Need to get all the files, well music and video, from my ipod touch 5th gen to my itunes libary.

Need to get all the files, (well music and video), from my ipod touch 5th gen to my itunes libary. (So basically sync the other way to normal)
Laptop hard drive broke so had to buy a new one and obviously now need to sort out my itunes.
Did try downloading all my purchased stuff onto itunes but it has missed some things off, and there are some files I did not purchase from itunes so need a way of getting them back on there.
Sure this question has been asked a million times but can't find anything to help me on here so thought I'd ask.
-Did have a look at going onto the start menu and opening the hidden items thing but couldn't see any reference to ipod or device on it so wasn't sure how to do it that way.
-On itunes under my device when its connected, the section about manually restoring and backing up, would that help me? Because that says it will manually back up my ipod to my computer then could restore that back up, obviously I don't want to accidnetally get rid of everything on my ipod so didn't want to try that just in case without checking.
(And yes I have disabled auto sync to device when conncected!)
Can anyone help me please? Sorry if i've overcomplicated this!
Thanks:)
Chris

Backing up an iOS device will copy some data to a backup file within iTunes, but this excludes all media. You can also transfer iTunes Store purchases from the iDevice to iTunes but, without using a third-party tool, nothing else. As long as you do not sync the iPod with your new library, the media that's on it will remain ... for as long as it keeps functioning, is not lost, stolen, eaten by the dog, ...
You may also have an option to recover your previous library from your old laptop; as long as its hard drive isn't fried, a computer repair store or technician may be able to extract the drive, mount it in an external enclosure, and copy your data to another PC. Whatever you choose, there is no real alternative to having all your media on your computer, managed by iTunes, and regularly backed up to another device/location.

My moms computer died we are putting the old drive into the new computer as a slave drive. how do I transfer all the bookmarks, user names and passwords from the old drive to the new drive?

<blockquote>Locking duplicate thread. 
Please continue here: [[/questions/889318]]</blockquote>
Hello,
Sorry if this posted twice I am NEW. I thought I could just go back to what I typed and add to it. Mom had a computer it died they are putting in the old drive on the new computer as a slave. What are the steps I need to do to transfer ALL the bookmarks, user names and passwords onto the new computer. We will have 3 desktops do we have to do the same steps on each desktop? I do not want to re enter all the user names and passwords on the new hard drive. Old computer was Windows XP the new computer is Windows 7 Kathryn Schwartz

Duplicate - https://support.mozilla.com/en-US/questions/889318

When I type in a question here, all the posts say they were written in 1969! What's with that?

When I type in a question here, all the posts say they were written in 1969! What's with that?

Hello, try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
[[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

IS - Retail, What are all the version currently available and what is lates

Hi,
What are all the version currently available and what is latest version?
Regards

Hi akshitha,
1. A logical database is in fact
a program only.
2. This LDB provides two main things :
a) a pre-defined selection screen
which handles all user inputs and validations
b) pre defined set of data
based upon the user selection.
3. So we dont have to worry about from
which tables to fetch data.
4. Moreover, this LDB Program,
handles all user-authorisations
and is efficient in all respects.
5. tcode is SLDB.
1. To get a taste of it.
2. create a new z program.
3. while creating type PNP
in logical database field.
4. paste this code and execute.
REPORT ABC.
infotypes : 0001.
TABLES : PERNR.
GET PERNR.
WRITE :/ PERNR-PERNR.
5. The selection screen which u see
is coming from logical database PNP program.
6. Execute
7. U will get a list of pernr.
SAPDBPNP
this is the main program of LDB PNP
which does the main work.
SAPDB + ldb name.
regards,
amit m.

My iPod touch gen5 wifi keeps dropping out. All the other iPods, iPads and iPhones don't in the house, just the iPod touch gen 5, entering the password every time is a pain, why can't it have a button to remember password like all the other devises.

My iPod touch gen5 wifi keeps dropping out. All the other iPods, iPad, and iPhone 4's don't in the house.
Why doesn't it remember the wifi password like the other i devises, it's a bugger entering it in every time.

You late question did get answered:on the 18th of this month. Sounds like you did not like the answers. Starting a new post without mentioning yur first post wastes people time
My iPod touch 5th gen isn't charging and when I plug my working charger in that I've always used a message pops up that says "This accessory may not be supported". So can I send it in for a new one if I have a warranty?

Virus has changed all the office file format and cant open those file

Hello
Recently I attacked by some new virus which is changed my all the office document files and added a extra extension after the office file extension.If I manually change the infected file extension to orginal file format and try open it shows error message.
Although having System Center Endpoint Protection how could it would be the affected by the virus ?
Now please suggest me how to recover the those files to orginal file format or recover MS office file???
Thanks

Hi,
Anti-virus solutions are necessary to protect your system but it can never be a 100% secure.
Once Office files are damaged by the viruses, we can't guarantee the files can still be recovered.
Anyway, you can still try the "Open and Repair" feature in Word to repair the file.
Take Word 2013 for example, click FILE -> Open -> Browse to the file location -> Select the document -> Find the "Open" button, click the "Open and Repair" button from the drop list. Check if this can repair the document.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Question regarding all the x58 Pro-e and memory problems

Similar Messages

Maybe you are looking for