Question regarding order partners (IHPA)

Hello,
we have a partner determination procedure with 9 partner functions.
Some of them are from partner type KU (customer), some PE (personnel number) and some AP (contact person).
In my custom report i need to have name and adress of each of this 9 partners.
Since this are different tables i´m not sure if there isn´t an easier way?
How could i read name and adress for the IHPA partners? Is there a usefull function module which could be used?
Thanks a lot.
Kind regards
Manfred

Hi,
thank you for your answer...
the BAPI does not deliver more details for partner like IHPA, only PARVW and PARNR is there.
I found nothing which helped me to find out names and adresses for all partners idependend from partner type.
Or have i missed something.
Kind regards
Manfred

Similar Messages

Question re Order of Sharpening and NR

Hello all,
Very quick question regarding order of sharpening and noise reduction. Is NR only supposed to be used to deal with sensor noise (like high ISO noise)? I ask because sharpening obviously introduces noise, which then could be tamed with NR (decreasing sharpness though, right?), but do you really want to do that? Are you supposed to do NR first, then sharpen up and live with the noise introduced therein?
Thanks, and I apologize for the stupid question!
Almost forgot--I do NOT have LR storing metadata in XMP files automatically (the checkbox in the catalog settings), but I noticed that after editing and adding metadata to photos, LR creates XMPs anyway. This confused me, but I checked the folder a little while later and noticed that all the XMPs are gone. Does LR temporarily create the XMPs before its stores in info in the catalog?
Thanks!
f1fan

The order in which you do things in Lightroom is meaningless...Lightroom processes images in its own order which has nothing to do with the order you set parameters.
And yes, Noise Reduction and Sharpening are really interrelated. It could be argued you shouldn't do one without doing the other. Noise Reduction is off by default but even well exposed low ISO images may need noise reduction to optimize the image when proper sharpening is applied.

Question regarding homehub and Open reach router -...

Hi all,
I had infinity installed earlier this month and am happy with it so far. I do have a few questions regarding the service and hardware though.
I run both my BT openreach router and BT Home hub from the same power socket. The problem is, if I turn the plug on so both the Homehub and Openreach Router start up at the same time, the home hub will never get an Internet connection from the router. To solve this I have to turn the BT home hub on first and leave it for a minute, then start the router up and it all works fine. I'm just curious if this is the norm or do I have some faulty hardware?
Secondly, I appreciate the estimated speed BT quote isn't always accurate, I was quoted 49mbits down but received 38mbits down - Which I was happy with. Recently though it has dropped to 30. I am worried this might continue to drop over time. and as of present I am 20mbits down on the estimate . For the record 30mbits is actually fine and probably more than I would ever need. If I could boost it some how though I would be interested to hear from you.
Thanks, .

Just a clarification: the two boxes are the HomeHub (router, black) and the modem (white). The HomeHub has its own power switch, the modem doesn't.
There is something wrong if the HomeHub needs to be turned on before the modem. As others have said, in general best to leave the modem on all the time. You should be able to connect them up in any order, or together. (For example, I recently tripped the mains cutout, and when I restored power the modem and HomeHub went on together and everything was ok).
Check if the router can connect/disconnect from the broadband using the web interface. Leaving the modem and HomeHub on all the time, go to http://192.168.1.254/ on a browser on a connected computer, and see whether the Connect/Disconnect button works.

**question regarding 3G and wif**.

I have a question regarding 3G and wifi. I have #G activated as well as wifi, when I go to retrieve mail for example I get a pop up asking me if I want to connect to a wifi network…should I have wifi and 3G activated at the same time, and why am I getting the pop up…
Thanks

You can have them on at the same time, but they will not be used at the same time for data. The order of preference for data is WiFi > 3G > EDGE > GPRS. You're getting the pop up, most likely, because you have Settings > Wi-Fi > Ask to Join Networks set to ON. You can set that to OFF, and the iPhone will still join known (i.e. previously used) WiFi networks automatically.

I have some questions regarding setting up a software RAID 0 on a Mac Pro

I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
I should be most grateful to receive advice regarding the following questions:
QUESTION 1:
I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
Or would I have to reinstall the OS, applications and software again?
I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
QUESTION 2:
I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
QUESTION 3:
Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
Or would this not be of any use anyway, in the event of a single drive failure?
QUESTION 4:
Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
QUESTION 5:
If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.

Well said.
Steps to set up RAID
Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
1. Open Disk Utility (/Applications/Utilities).
2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
4. Name the RAID set.
5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
6. Click Create.
Recovering from a hard drive failure on a mirrored array
1. Open Disk Utility in (/Applications/Utilities).
2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
3. If an issue with the disk is indicated, click Rebuild.
4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
5. Repeat steps 1 and 2.
6. Drag the icon of the new disk on top of that of the removed disk.
7. Click Rebuild.
http://support.apple.com/kb/HT2559
Drive A + B = VOLUME ONE
Drive C + D = VOLUME TWO
What you put on those volumes is of course up to you and easy to do.
A system really only needs to be backed up "as needed" like before you add or update or install anything.
/Users can be backed up hourly, daily, weekly schedule
Media files as needed.
Things that hurt performance:
Page outs
Spotlight - disable this for boot drive and 'scratch'
SCRATCH: Temporary space; erased between projects and steps.
http://en.wikipedia.org/wiki/StandardRAIDlevels
(normally I'd link to Wikipedia but I can't load right now)
Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
To help understand and configure your 2009 Nehalem Mac Pro:
http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
http://macperformanceguide.com/
http://www.macgurus.com/guides/storageaccelguide.php
http://www.macintouch.com/readerreports/harddrives/index.html
http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
http://kb2.adobe.com/cps/404/kb404440.html

Questions regarding how I pay my Line Rental Bill ...

Hi BT, I'm currently a BE Broadband customer, I was a BT Broadband customer back in the days when you had BT Home Hub 1.0 and 8mb packages which i was only getting like 5-6mb, 0.3mb upload and constant speed caps on my connection to 1mb. You guys didn't have true unlimited usage back then so being a gamer and someone that frequently downloads I changed to BE broadband. They gave me a steady 11mb connection with 1.3mb upload speed which I've been satisfied with. But now BE Broadband has been sold off to Sky which I don't think I want to be apart of as I've heard a lot of bad feedback and I really do not want to be forced into paying their line rental if I where to switch to Sky Unlimited.
So now I'm considering coming back to BT Broadband, knowing that you've probably improved over the years. I hope so. I know you have this whole BT Infinity going now but my area doesn't support fibre optic broadband and probably never will because I've looked on the BT Openreach website and it says there are no plans for my area to be installed with fibre optics which I would of wanted to have but oh well. What are the chances of my internet speed being the same as it is now with BE Broadband? I don't see why it would go any slower. Are your upload speeds around the same?
Also I have a question regarding the payment methods of your BT Line rental. I'm currently already on the BT line rental on the anytime calling plan. I pay the bill quarterly every 3 months, which I'm comfortable with. What confuses me is when I select the package to order BT Unlimited + Calls I only have the option to select Monthly Line Rental or Line Rental Saver. Why am I able to pay my phone every 3 months if those are the only two options? I'd prefrably want to stick to how I pay my phone bill. So further more how should I go about ordering BT Unlimited broadband without it interfering with my currrent BT line rental? I just want BT Broadband unlimited along side my current BT line rental method of pay. Would I still be eligible for the 6 months free and the gift card. Is the BT Home Hub 4 that comes with it free also? Also one more question, I'd need my MAC code from BE Broadband right?

This is a community forum. The people on here are other BT customers.
The speeds have certainly improved but only if BT's equipment at your exchange supports ADSL2/2+. If not, you'll get what you had before. While the speeds have improved, the same can't be said for the customer service. Upload on ADSL2+ can be up to about 1.2M. On ADSLMax, it's still capped at 448K.
BT like to combine broadband and phone on one bill. So if you get line rental and broadband, they will send you one monthly bill for both. You might be able to get them separately, but not through the web site. Try sales on 0800 800 150.

Questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN Access

Hi there,
I want to ask a series of questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN access and was hoping whether you could help me. Below are my questions to ask you.
Outlook Web App - What do I need to configure in order to get my Exchange account to work with the OWA app on my iPhone? Is Office 360 required on the server that hosts Outlook Web App in our organisation? When I configure the settings and
connect I get the following message "couldn't connect - We couldn't connect to the server. Check your information and make sure it's correct." I can connect with other devices using Outlook Web App.
Remote Desktop - What do I need to configure in order to connect to my computer at work using Remote Desktop on my Windows Phone? When I configure the settings and connect I get the following message "Connection error - We couldn't connect
to the remote PC. Make sure the PC is turned on and connected to the network, and that remote access is enabled. Inquiring minds may find this error code helpful: 0x204" I can connect with other devices using Remote Desktop. There are currently no
RD Server settings in the Remote Desktop app on the Windows Phone and the only way I'm to connect to my PC at work is via Remote Desktop and not to be confused with the one by Microsoft, however the app is on a trial basis and times out every 5 minutes and
can only be used once every hour unless I purchased the app for £2.99 off the App Store but would ideally like to use the Microsoft Remote Desktop app though.
Remote Web Access - What do I need to configure in order to get Remote Web Access on my Windows Phone using a URL? When I log in using a URL I get the following message "There is a problem with this Web page. Please contact the person who manages
the server" I can connect with other devices using Remote Web Access. Also how do you enable the background option for Remote Web Access? I know how to do this in Remote Desktop but not in Remote Web Access. Remote Web Access works on PCs regardless
being onsite and offsite and on my iPhone, the same issue also occurs with my Nokia 5230s regardless of whether I'm using Opera Mobile or Mini or the latest Nokia Browser.
VPN access - How do you configure VPN access on a Windows Phone using VPN? I cannot find the protocols PPTP, L2TP, SSTP and IPsec in order to configure VPN access on the Windows Phone apart from IKEv2.
Many thanks,
RocknRollTim

Any help would be much appreciated.
Kind regards,
RocknRollTim

Quick question regarding best practice and dedicating NIC's for traffic seperation.

Hi all,
I have a quick question regarding best practice and dedicating NIC's for traffic seperation for FT, NFS, ISCSI, VM traffic etc. I get that its best practice to try and separate traffic where you can and especially for things like FT however I just wondered if there was a preferred method to achieving this. What I mean is ...
- Is it OK to have everything on one switch but set each respective portgroup to having a primary and failover NIC i.e FT, ISCSI and all the others failover (this would sort of give you a backup in situations where you have limited physical NICs.
- Or should I always aim to separate things entirely with their own respective NICs and their own respective switches?
During the VCAP exam for example (not knowing in advance how many physical NIC's will be available to me) how would I know which stuff I should segregate on its own separate switch? Is there some sort of ranking order of priority /importance? FT for example I would rather not stick on its own dedicated switch if I could only afford to give it a single NICs since this to me seems like a failover risk.

I know the answer to this probably depends on however many physical NICs you have at your disposal however I wondered if there are any golden 100% rules for example FT must absolutely be on its own switch with its own NICs even at the expence of reduced resiliency should the absolute worst happen? Obviously I know its also best practice to seperate NICs by vender and hosts by chassis and switch etc

Question regarding to changing the region of the app with remaining balance

Question regarding to changing the region of the app with remaining balance
Hello, I am attempting to change the location of my app store which has remaining balance of 0.01$. In order to change the location of the store, it requires spending all the remaining balance. As my balance is too low " 0.01$" to buy an app from the store, I am not able to change the region of my app store. Moreover, Since I am not a residence in USA, I am not able to use my credit card either.
I am wondering if it is possible to change the location of my app store with a remaining balance OR to delete my current balance.
Thanks
Nejem

Click here and request assistance.
(85511)

Question regarding Command pattern

Hi!
I have a question regarding the Command pattern:
//Invoker as defined in GOF Design Patterns
public class SomeServer {
    //Receiver as defined in GOF Design Patterns.
    private Receiver receiver;
    //Request from a network client.
    public void service(SomeRequest request) {
        Command cmd = CommandFactory.createCommand(request);
        cmd.execute();
}The concrete command which implements the Command needs a reference to Receiver in order to execute it's operation but how is the concrete command best configured? Should I send Receiver along with the request
as a parameter to the createCommand method or should i configure the receiver inside the CommandFactory or
send it as a paramter to the execute method? Since SomeServer acts as both client and invoker, SomeServer "knows" about the Commands receiver. Is this a bad
thing?
Regards
/Fredrik

#!/bin/bash
DATE=$(date '+%y-%m-%d')
if find | grep -q $DATE ; then
echo "OK - Backup files found"
exit 0
else
echo "Critical - No Backups found today!"
exit 2
fi
should work too and it's a bit shorter.
Please remember to mark the thread as solved.

Some question regarding time evaluation

Hello,
I have two questions regarding time evaluation:
1. Is it possible (if yes, how) to still include a employee in time evaluation even if this employee is inactive (status P0000-STAT2 = 0). We need this in order to calculate weeks of not working (this has to be calculated). I know that for payroll this is possible wih a setting in infotype 0003.
2. Is it possible (and how) to read data back from payroll into time. For example in payroll you export something to ZL table, can you then pick this up in time evaluation schema, as there is also ZL table. Or is there another way to do this?
Thanks for you answers,
Liesbeth

hi Schrage
Why you want to evaluate the time for inactive person.
If you want you can do.
Process :
First of all you have to group your employees. and sub groups.( for inactive emp)
Assign the employee sub group grouping for PCR in Basic Pay ( IMG ).
Then come to Time Evaluation Schema. Put the Day grouping nn nn nn nn in the Parameters. and run the time evaluation. You will get the output in DZL table.
For the above process you need to configure the T510S table.
Yes you can read the payroll into time.
the same concept will run in both of the modules.
the output should appear in the ZL table only.
Here the concept is.....Some companies, they will not use the payroll wage types. only they will use the time wage types.. these wage types has to be configure in the T510S. and we have to do the wage type copying from the part of time management only if they are not using the payroll. So either in Payroll or in Time management the evaluation of time willbe the same.
Cheers
Vijai

Questions for order management

Hi All,
Please forward me the possible questions on Order management for a person with an experience of 1 year in SAP SD.
Regards,

http://www.sap-img.com/sap-sd.htm
Interview Questions
Important Tips for Interview for SAP SD
SAP SD Interview Questions
Interview Question and Answers on SAP SD
Some SAP SD Interview Questions 1
Some SAP SD Interview Questions 2
Tables/Tcodes in SAP SD
Important Tables for SAP SD
SAP SD Transaction codes List
Task Specifc SD Transaction Codes 1
Task Specifc SD Transaction Codes 2
SD Frequently Asked Question
Sales and Distribution FAQ
Link Between SAP SD, MM & FI
Why Do We Assign Division to Sales Organisation
Regards,
Rajesh Banka

I got a question regarding running iOs and Windows using virtual software.

Greetings!
I got a question regarding running iOs and Windows using virtual software. I recently bought a monitor so I can display Windows on it and run both OS at the same time.Now,I'm using BootCamp. I downloaded VirtualBox for "tranferring" Windows on it. Since I'm a new iOs user , what do I need to do in order to make work?
Do I need to un-install Windows from BootCamp,install VirtualBox and then install them again?
Any information would be appreciate it!

That should work to use OS X, you can run MS Windows using Virtual Box and use a seperate display for the Virtual Box window. That way you can run OS X and MS Windows simultaneously. However remember Virtual Box is freeware and not a commercial application like Parallels or VMWare Fusion and may not have the features of a commercial application. Support for Windows run in any virtualization application (Virtual Box, Parallels or Fusion) is not generally done on this forum as they are not OS X related. To get help on those apps you usually will need to go to their forums.
Remember IOS will not run on either OS X or MS Windows, it only works on IOS devices.
Good luck with your installation.

Questions regarding the APEX sample shopping cart

I am fairly new to APEX development, but had a few questions regarding the sample APEX shopping cart:
1) is there a way to integrate Google check out payments with the sample APEX shopping cart
2) is there any way to list a service, that involves monthly recurring payments
3) is there any other shopping cart that is APEX based that is available
Thank you,
Ashok

Hi Sam,
i am haveing a deadline monitoring for my shopping cart where remainders are going to generate for first day and the second day, after both the remainders generated and the approver changing the cost center or asset or order at that time, the workflow flow should retrigger and send the approval mail to the new approver, but it is not going to the new approver, so the workflow is not triggering in my case. so i need to restart my workflow again if any changes occurs.
in the second point my functional guy says that, when the approver changes any text or any date like that it should come for the accept changes, and when he sees the approval preview, only the approval person should be there but not the creator person in the preview and when the creator of the sc accepts the changes it is showing that it is approved by the creator name but he says that it should the approver name not the creator name.
so can you please help me in this to get the solution.
thanks in advance

Questions Regarding MRP

I had a couple of questions regarding MRP. Will be glad if you could answer these:
Is it possible to remove the 'in house production time' & 'planned delivery time' from MRP?If it is possible, what will be the impact of removing the above?
Can we change the start/end date of the factory calendar, with or without removing the above?
Please answer the above.
Thank you very much.
Regards

If we keep inhouse production time and planned delivery time as zero, will this have any other impact?
Secondly, is it possible that we can manually change the start and end dates which are suggested electronically by SAP?
As I said earlier if you keep in house production time as zero system still would allow to create a material master record and based on this MRP calculates the dates required for any planned order in basic scheduling.
If you keep this as zero you order basic start and end basic date would be on same day.
It is recommended to maintain the no days required for in house produced material in MRP2 or in WS view or you need to enter the setup, tear down, processing, and inter operation times so that based on these values, the system determines the in-house production time on the basis of lot size.
Same way for Planned Delivery Time, only the difference in both of these fields are In house Production time considers the FC where as Planned delivery time considers the calendar days.
For your 2nd Question if you change the system proposed dates in any planned order based on the scheduling type start and end dates would be changes accordingly.
Br
KK

Question regarding order partners (IHPA)

Similar Messages

Maybe you are looking for