Questions about trees

There will be several different trees in an application I will begin developing shortly and I want to understand, if the tree of HTML_DB helps or not. And any help on how I could implement those trees otherwise would be also of help.
1) Is it possible to make a tree out of different tables? * For one there are main services, that may contain several subservices, which of themselves can be part of any number of main services. So the mapping of subservisces to main services is done in a separate table (not by having the table refer to itself), but the client wants to see them compactly in one tree (so that every main service has its subservices below it, the subservice ight be in a tree more than once).
* Another problem is that there is a view, where all of the jobs for one main service are shown and there has to be several jobs to be done for each subservice. It would be convenient to show those jobs in a tree as leafs of subservices, so its always seen, which service is completed by a job; you can collapse the services you dont want to see, etc...
2) Is it possible to expand dynamically one or more 'folders' in a tree, when I link to a page? Sometimes when user goes to tree page, it is already known, where his target node might belong into, so it would be easier for the user to see that category already opened.
it seems to be all for now, but I am sure, there will be more.

hi kaja--
1) so long as you can write view of your services and subservices that has a valid recursive hierarchy in it, you should be fine to base your tree off of that view.
2) you might already know this, but it's a pretty simple matter to have your tree start from a dynamically set TREE_ROOT value. so you could pretty easily set that root to be whatever category you need. if you want to show a category expanded but not as the root of your tree, i've this semi-hack: if you expand and contract the nodes of any tree in HTML DB, you'll see that fourth value being passed through in the URL is our :REQUEST value (you can read up on our URL syntax in our online doc if you'd like, at http://htmldb.oracle.com/i/doc/mvl_fund005.htm#sthref445 ). anyhow, you can set that value manually (again via the URL, for example) in those cases where you know you want to a specific category to already be opened.
hope this helps,
raj

Similar Messages

  • Simple question about Tree

    This is a simple issue but i don't seem to be able to solve
    it, the thing is i have a Tree component and i don't want any image
    for the the icons (by default they are included), i just want the
    plain text, so i need to remove the leaf, disclosure and the folder
    icon that appear in the Tree component.
    Any ideas on how to do this?
    Thanks

    The attached code helps, but does not get rid of the arrow
    without eliminating the ability to expand the tree.
    Remove the following to see the arrows (maybe that is what
    you want):
    disclosureClosedIcon: ClassReference("classes.EmptyIcon");
    disclosureOpenIcon: ClassReference("classes.EmptyIcon");

  • Question about Tree

    I need to build a dynamic tree based on sql returned from function - is this possible? The only option I see for tree source query is "Dynamic - From SQL Query" there is no option to use PL/SQL function returning SQL query.
    Any suggestions will be appreciated.
    George

    Hi,
    Creating a function that returns a TABLE would probably be the proper way to do this.
    You could, however, create a collection from the string generated by your code using APEX_COLLECTION.CREATE_COLLECTION_FROM_QUERY (see: [http://download.oracle.com/docs/cd/E10513_01/doc/appdev.310/e10499/advnc.htm#sthref2033]) and you could then base your tree on this collection.
    Andy

  • Question about navigation in session scope

    Hi.
    I dont know how to resolve a problem or how to focus this stuff.
    I'll try to explain myself.
    Let say I have a page (a.jsf) with several links, all this links navigates to the same page (b.jsf) which shows the results.
    For each link in a.jsf I have attached a bean with a logic, so If I click in link 1 I go to the b.jsf showing data read from the database.table1. If I clik in link2 I go to b.jsf showing data read from database.table2, and so on...
    The beans are in session scope (and must be).
    The first time works ok because I initialize the bean in b.jsf, read data and I show using a selecManyListBox to show it, but if I go back and select another link it goes to b.jsf, but it shows the old data, the data read the first time, because it never calls again the init method.
    Somebody has talked about using an additional bean to control this but once the bean in b.jsf is created I don't know how to call again the init method in beanB (b.jsf)..
    I have attached a very simple project to deploy in eclipse 3.3 and tomcat 6.0. In this example instead of read from database I read from an structure created in memory to simulate this.
    Somebody could take a look and comment something about it.
    http://rapidshare.com/files/197755305/_session-forms.war
    Thanks

    Hi.
    I understand is the same doing in the action method in a button or a commnad, the project is just an example, my real app is a tree, so is not a question about a button or a command, is about the logic being in session scope. I don't know how to face it.
    thanks

  • A french question about a login

     

    Et voilà,
    WindowsUserName : TextData;
    WindowsUserName = task.part.OperatingSystem.GetEnv(name='username');
    Hope this helps
    Fabrizio Genesio
    Datasign AG für Informatik
    ch. d'Eysins 53a
    CH-1260 Nyon
    Switzerland
    Tel.: +41 22 361 04 04
    Fax: +41 22 361 01 10
    e-mail: fabrizio.genesiodatasign.ch
    <mailto:fabrizio.genesiodatasign.ch>
    URL: www.datasign.ch <http://www.datasign.ch>
    -----Original Message-----
    From: Olivier Andrieux [SMTP:oandrieuxaxialog.fr]
    Sent: Thursday, 27 April 2000 11:53
    To: Mailing Liste Forte
    Subject: (forte-users) a french question about a login
    Bonjour,
    J'ai une petite question &agrave; vous soumettre:
    Je voudrais r&eacute;aliser une fen&ecirc;tre de login avec Fort&eacute;, mais pour
    cela il me faudrait r&eacute;cup&eacute;rer les informations
    d'identification de chaque utilisateur sur le serveur
    NT. Questionner le serveur en utilisant les m&ecirc;mes noms et mots de passe
    utilisateurs que le serveur.
    Cela est-il possible ?
    Je vous remercie par avance pour vos r&eacute;ponse .
    A bient&ocirc;t
    Olivier.
    Olivier Andrieux
    Axialog Lille
    France

  • N00b question about the ABS

    Hey, I am new to Arch and I'm about to install it on my machine (used it a bit in a virtual machine) and I have a small nooby question about the ABS.
    According to the wiki: https://wiki.archlinux.org/index.php/Arch_Build_System
    "Running abs as root creates the ABS tree by synchronizing with the Arch Linux server."
    Does this mean that the ABS tree (not the package) is always downloaded from the official Arch Linux servers, never from any of the mirrors?

    jomasti wrote:
    ANOKNUSA wrote:makepkg is part of the abs package.
    You might be confusing that with makeworld. makepkg is included with pacman.
    Anyway, gregor, you are confusing the AUR with ABS. Although, what you are saying is still possible via the source files when looking up a package on https://www.archlinux.org/packages/. But with both, using a program or using the respective page is a personal choice.
    Yup, you're right.  My mistake.

  • Question about get web service result in actionscript and convert data format

    Hi, All
    I have question about how to get dataset from web services
    and put it in tree structure. I have 2 questions about this:
    1, How can I get data correctly in actionscript?
    I have no problem to get data by
    <mx:ArrayCollection id="acFolder"
    source="{mx.utils.ArrayUtil.toArray(MyGServices.getFolder.lastResult)}"
    />
    And display in datagrid.
    But when I try to use
    public function
    handleFolderContents(event:mx.rpc.events.ResultEvent):void{
    arData=mx.utils.ArrayUtil.toArray(event.result);
    acData=new ArrayCollection(arData);
    input.text=acData.getItemAt(0).id;
    Seems I can’t get data, it always say:
    TypeError: Error #1009: Cannot access a property or method of
    a null object reference.
    2, how to convert data format
    I get data from web service and want to convert it to tree
    structure, as mention below:
    I get:
    <Array>
    <id>111</id>
    <Name>Production1</Name>
    </Array>
    <Array>
    <id>222</id>
    <Name>Production2</Name>
    </Array>
    Convert to:
    <mx:XMLList id="treeData">
    <node>
    <node label="Production1" data="111">
    <node label="Production2" data="222"/>
    </node>
    </node>
    </mx:XMLList>
    Please help me.
    Thanks.

    First, don't specify the package path in the argument
    declaration. Instead import the event object:
    import mx.rpc.events.ResultEvent;
    The docs state this emphatically.
    Second, try "lastResult", in place of "result":
    arData=mx.utils.ArrayUtil.toArray(event.lastResult); // I am
    not positive about this. I maybe recall reading that result was ok
    for the event object, but maybe not.
    Finally, why do you want to convert the xml? You certainly
    could, but it would be a manual process, recursively reading the
    existing xml nodes and building the new structure, but again, why?
    Just use a labelFunction if necessary to display the nodes as
    you wish.
    Tracy

  • CFC's - Question about coding guidelines

    I have a question about the following section in the
    CF
    Coding guidelines
    quote:
    {cfmxroot}
    ---wwwroot/ » web-accessible .cfm pages and .cfc Web
    Services
    ---extensions/
    --------components/ » tree for .cfc files
    --------customtags/ » tree for .cfm custom tags
    --------includes/ » tree for include files
    ---config/ » tree for configuration files
    This implies that we have two Custom Tag Paths set up in the
    CFMX Administrator:
    {cfmxroot}/extensions/components/
    {cfmxroot}/extensions/customtags/
    We also have mappings for the root of the includes tree (for
    cfinclude) and the custom tags tree (for cfimport):
    /cfinclude » {cfmxroot}/extensions/includes/
    /customtags » {cfmxroot}/extensions/customtags/
    1. Why would you want to add both a custom tag path
    AND a mapping for " {cfmxroot}/extensions/customtags/"?
    2. The guidelines seems to imply you should use a custom tag
    path for components, instead of a mapping. If the "components"
    directory is already outside the webroot, then adding a CF mapping
    shouldn't make it web accessible, right? So is there any benefit to
    using a custom tag path versus a mapping?

    It is up to you where you put your components and where you
    put your custom tags. The standard way, as I know it, at least, is
    to create a mapping for your cfc directory on the
    Mappings page of the Coldfusion Administrator and to
    register the path to your custom tag directory on the
    Extensions/Custom Tag Paths page. In answer to your first
    question, you will also need to create a mapping for a custom tag
    directory if you intend to call tags using the template-attribute
    of cfmodule.
    Coldfusion considers the directory-path that you register on
    the
    Extensions/Custom Tag Paths page an absolute path. That is
    what enables you to call a tag directly by name on any page of your
    application, for example,
    <cf_myCustomTag>.
    One consequence is, if you stored a component myComp.cfc in
    such a directory, you could instantiate it on any page simply by
    running
    <cfset myObj = createobject("component","myComp")>
    However, this doesn't offer anything a mapping wouldn't. So,
    in answer to the second question, I don't think one should use a
    custom tag path for components. Mixing one's custom tags with one's
    components only produces an oil-plus-water structure.

  • A few questions about the design of the scheme

    Hello, all!
    I want ask some question about design of the scheme.
    1) If i store info about user (for example: /Smith/Bob - /phone values{+1 964 258 46 52}), i can request information by user (input parameters: /Smith/Bob - /phone, output:+1 964 258 46 52), but if i want get username by phone i must generate in store second string /19642584652 values{Smith Bob}. But I must duplicate any string - very prodigally. Are existing some work aruond?
    2) if i want store some string with different minor key i put: ( /Smith/Bob - /phone, /Smith/Bob - /image, /Smith/Bob - /adress), but i already get duplicate date. Are existing any compressin major`s key? If yes - how it works
    3) Are existing in Oracle NoSQL something like secondary index? If exist - how it works?
    4) If i want get value by major key, im use get function(for example /Smith/Bob - /phone). How works searching algoritm? What mathematical basis of search?

    >
    So, some a few clarifying questions.
    1) Request comes from the client(to cluster). It identifies the major key. And any rep group understand: contained in it is this line?
    2) If contains - they use b-tree map to find the right key (as local index in Oracle DB).
    Is it correct?
    >
    No. Please read the doc and the other forum threads. They explain this issue.
    >
    Can i use any different algoritm to search, different indexes(function based) for example (on step 2)?
    >
    No.
    when the expected release of this option?Oracle employees cannot talk about future release dates and contents.
    What algorithm used to compress the prefix of the key. And how it work`s.If you're interested in the implementation details you can read the BDB JE documentation on key prefixing and the BDB JE source code. See com.sleepycat.je.DatabaseConfig.setKeyPrefixing.
    http://docs.oracle.com/cd/E17277_02/html/index.html
    --mark                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Several questions about Application Security

    Hello,
    I have several questions about Application Security and perhaps I need a few tips...
    I have a lot of users in a few groups which have access to my application! And the different groups should have only access to their pages.
    In my application I use trees to navigate through the application.
    So my idea is that i display different trees for the different user groups and restrict the user to access the URL....so the user can only see and contact "their" pages.
    I know how to create the logic behind the trees, but how can I create the restricted URL access...
    The "No URL Access" in the Session State Protection can not be used, because I use a lot of links in reports and HTML regions.
    Is there another way to solve that?
    But I am unsure if that is a "good" solution for my problem!
    What do you think about that?
    Am I going to do that too complicated?
    Could that be done by authentication or authorization?
    (By the way, I do not understand the differences between authentication and authorization. Can anyone help?)
    I would be glad for any reply!
    Thank you,
    Tim

    Hey Arie and Scott,
    thank you for your quick reply!
    Now I understand the context around authorization and authentication...
    I try the Access Control List and I think that is a very nice feature! Really good!
    But now I am wondering, how I can create more privileges?
    So that I have a few "end-user-roles" and then I can choose who have access to a page and who not!
    Does anybody know how to do that?
    Thank you,
    Tim

  • Questions about your new HP Products? HP Expert Day: January 14th, 2015

    Thank you for coming to Expert Day! The event has now concluded.
    To find out about future events, please visit this page.
    On behalf of the Experts, I would like to thank you for coming to the Forum to connect with us.  We hope you will return to the boards to share your experiences, both good and bad.
     We will be holding more of these Expert Days on different topics in the months to come.  We hope to see you then!
     If you still have questions to ask, feel free to post them on the Forum – we always have experts online to help you out.
    So, what is HP Expert Day?
    Expert Day is an online event when HP employees join our Support Forums to answer questions about your HP products. And it’s FREE.
    Ok, how do I get started?
    It’s easy. Come out to the HP Support Forums, post your question, and wait for a response! We’ll have experts online covering our Notebook boards, Desktop boards, Tablet boards, and Printer and all-in-one boards.
    We’ll also be covering the commercial products on the HP Enterprise Business Community. We’ll have experts online covering select boards on the Printing and Digital Imaging and Desktops and Workstations categories.
    What if I need more information?
    For more information and a complete schedule of previous events, check out this post on the forums.
    Is Expert Day an English-only event?
    No. This time we’ll have experts and volunteers online across the globe, answering questions on the English, Simplified Chinese, and Korean forums. Here’s the information:
    Enterprise Business Forum: January 14th 7:00am to 12:00pm and 6:00pm to 11:00pm Pacific Time
    Korean Forum: January 15th 10am to 6pm Korea Time
    Simplified Chinese Forum: January 15th 10am to 6pm China Time
    Looking forward to seeing you on January 14th!
    I am an HP employee.

    My HP, purchased in June 2012, died on Saturday.  I was working in recently installed Photoshop, walked away from my computer to answer the phone and when I came back the screen was blank.  When I turned it on, I got a Windows Error Recovery message.  The computer was locked and wouldn't let me move the arrow keys up or down and hitting f8 didn't do anything. 
    I'm not happy with HP.  Any suggestions?

  • Have questions about your Creative Cloud or Subscription Membership?

    You can find answers to several questions regarding membership to our subscription services.  Please see Membership troubleshooting | Creative Cloud - http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html for additional information.  You can find information on such topics as:
    I need help completeing my new purchase or upgrade.
    I want to change the credit card on my account.
    I have a question about my membership price or statement charges.
    I want to change my membership: upgrade, renew, or restart.
    I want to cancel my membership.
    How do I access my account information or change update notifications?

    Branching to new discussion.
    Christym16625842 you are welcome to utilize the process listed in Creative Cloud Help | Install, update, or uninstall apps to install and evaluate the applications included with a Creative Cloud Membership.  The software is fully supported on recent Mac computers.  You can find the system requirements for the Creative Cloud at System requirements | Creative Cloud.

  • Questions about using the Voice Memos app

    I'm currently an Android user, but will be getting an iPhone 6 soon. My most used app is the voice memos app on my Android phone. I have a couple questions about the iPhone's built-in voice memos app.
    -Am I able to transfer my voice memos from my Android phone to my iPhone, so my recordings from my Android app will show up in the iPhone's voice memos app?
    -When exporting voice memos from the iPhone to computer, are recordings in MP3 format? If not, what format are they in?
    -In your opinion, how is the recording quality of the voice memos app?

    You cannot import your Android voice memos to your iPhone's voice memo app.  You might be able to play the Android memos and have the iPhone pick up the audio and record it.
    Here is the writeup about sending voice memos from the iPhone to your computer (from the iPhone User Guide):
    App quality is excellent.

  • Re: Question about the Satellite P300-18Z

    Hello everyone,
    I have a couple of questions about the Satellite P300-18Z.
    What "video out" does this laptop have? (DVI, s-video or d-sub)
    Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
    What is the warranty on this laptop?

    Hello
    According the notebook specification Satellite P300-18Z has follow interfaces:
    DVI - No DVI port available
    HDMI - HDMI-out (HDMI out port available)
    Headphone Jack - External Headphone Jack (Stereo) available
    .link - iLink (Firewire) port available
    Line in Jack - No Line in Jack port available
    Line out Jack - No Line Out Jack available
    Microphone Jack - External Micrphone Jack
    TV-out - port available (S-Video port)
    VGA - VGA (External monitor port RGB port)
    Also you can connect it to your LCD TV using HDMI cable.
    Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

  • Some questions about Muse

    First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
    The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
    It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html).  I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
    Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
    A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
    The hits from Facebook have sometimes very long links, eg.
    (http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident,  moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
    The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but  the text after export and moving cursor into it does not change color for some reason.
    I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
    The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
    The comments Disqus do not load, especially at horizontal layouts  (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
    YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
    Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
    On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
    This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
    Is it possible to make an option of  scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
    Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
    I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
    In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
    According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
    The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
    Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
    I’m using Adobe Muse 7.2 on OS X 10.9.1.
    and I'm sending Muse file to <[email protected]>

    Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
    Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
    Here is the link to the old forums- http://support.muse.adobe.com/muse

Maybe you are looking for