Questions for Senior Project

Hey guys,
For my senior project, I chose Programming in Java. However, my school requires that I interview 5 people on the topic, and let's face it, it can be hard to find programmers to interview in person.
However, I also have the option to do an "Email Interview"..Granted, this is not exactly email, but I believe it's the most direct way of trying to find people to interview.
So, the requirements state a minimum of five interviews...If anyone would be willing to spare a few minutes and answer the five questions below, it will be greatly appreciated.
A Little About You, The Programmer...
Question 1: How many years of experience do you have with programming in Java?
Question 2: How many hours a week do you program in Java?
Question 3: What is the biggest self-completed program you have coded, and if possible, include a brief description?
Now To The Questoins...
Question 4: What concept of programming in Java would you say is most important when programming?
Question 5: What online reference do you find yourself using most often when a Java related question surfaces?
Question 6: What graphics package would you recommend when working with 2D game programming?
Question 7: When saving information into files, what forms of encryption do you believe should be in place to prevent an outside source from viewing the sensitive information?
Question 8: Is there any way, in your opinion, to reduce overhead caused by implementing the SWING package into your program?
That's it. Please post your answers by replying to this or emailing [email protected] . Thank you in advance.
Mike

Question 1: How many years of experience do you have
with programming in Java?Hmm.. Think it's been 6 or 7 years. Since it came out.
Question 2: How many hours a week do you program in
Java?Whenever time permits inbetween meetings, and preparing documents. I would suppose about 10 to 15 hours a week would be a good week.
Question 3: What is the biggest self-completed program
you have coded, and if possible, include a brief
description?Developed a Web Based e-Learning System for about 10K students, and 100+ lecturers of a University in 1997 using Servlet API 0.9, JDBC 1.0, and Java 1.1. Hehe.. J2EE was not available then, so had to develop the entire middleware from ground up. (P.S. Anyone still remember Jigsaw from W3C ??)
Now To The Questoins...
Question 4: What concept of programming in Java would
you say is most important when programming?Proper design, and employ the proper usage of patterns.
Question 5: What online reference do you find yourself
using most often when a Java related question
surfaces?JavaDocs.
Question 6: What graphics package would you recommend
when working with 2D game programming? Not really much of a game programmer, and dun really do much front end coding. But whenever the need arises, Swing and JSPs are most likely it
Question 7: When saving information into files, what
forms of encryption do you believe should be in place
to prevent an outside source from viewing the
sensitive information?I dun usually save my information into files. Usually into the Database. But when there is a need, PGP.
Question 8: Is there any way, in your opinion, to
reduce overhead caused by implementing the SWING
package into your program?Hmm.. It is ultimately design. As crackers said, most IDEs use Swing (or SWT in the case of Eclipse). I think IDEA did a great job with IntelliJ. I am not much of a UI programmer, so can't help you out much here.
That's it. Please post your answers by replying to
this or emailing [email protected] . Thank you
in advance.
Mike

Similar Messages

  • Some questions for class project? Trying to learn more about the iPhone

    Hey guys, I am looking for some quick feedback on the iPhone and possibly the iPad for a class assignment. If anyone could share information on the following questions that would be fantastic. Thanks!
    1. What are some of the disadvantages of Apple not providing Flash/USB for its products(iPad, iPhone, iPod Touch)?
    2. Why should customers buy an iPad (no USB) rather than the Kindle (USB ports)?
    3. Why do you think Apple doesn't provide Flash/USB ports to its products (iPad, iPhone, iPod Touch)?
    4. Would the lack of USB/Flash in Apple products affect your decisions to purchase Apple products versus a competitor's product?
    5. Do you expect that Apple will begin to incorporate technologies such as USB/Flash in the future as competitor products begin to steal market share?
    6. Apple views Flash as a dying technology. Steve jobs has even compared not supporting Flash on the iPad to Apple dropping support for floppy drives. Do you believe there is any value to this analogy and why?
    7. What do you think could be some good aspects of no USB on the iPad?
    8. What affect will the implementation of HTML5 have on the issues with iPad's lacking Flash capabilities?
    9. How did you gain an interest in Apple how would you rate that product and would it it recieve a higher rating if it provided USB/Flash?
    10. Would you be more interested in purchasing a Apple product if USB use was provided? Or would this quality not have any affect on your decision to purchase the product?

    This sounds more like a marketing survey...

  • Ideas for my Senior Project?

    I'm a computer science student and I'm planning for my senior project next year.
    I've proposed to do a power consumption meter application for Network Administrators. It's supposedly gonna gather power consumption information from the server and from the workstations within the local network.
    I wanna do this kind of project because my university prefers projects to be somehow beneficial to the community and environment, and this tool will somehow help network administrators to keep track of their energy consumption and aid them in being more cost-efficient, not to mention environment-friendly, when it comes to networking.
    The only programming language I know well is Java. But so far I dunno how I'm gonna do this project.
    The only idea I have is that I have to be able to access hardware information, and also be able to access it over a network protocol. That way, I guess i can estimate power consumption from each of the hardware unit models used in the network.
    Do you guys have any more ideas on how this project can be done?
    Thanks in advance.

    You must have missed what I was saying:
    Hardware interfacing is done in C/C++ or some other language other than Java. Java supports an interface to communicate with other routines developed in C/C++ or any language that will support a C/C++ calling structure. This interface is called JNI and is meant to allow your Java portion of your application to communicate/interface with your C/C++ portion of your application. JNI requires the "*.h" files created for you C/C++ project.
    Other than being a lot of C/C++ code and a JNI component, your project should be fairly straight forward.

  • Why isn't there a TechNet forum for ADFS yet? They have been forwarding questions to the "Project Geneva" forum for years now.

    Why isn't there a TechNet forum for ADFS yet? They have been forwarding questions to the "Project Geneva" forum for years now.
    It would be nice if there was IT Pro specific forum. The MSDN Geneva forum has people who have programming questions for WIF in addition to people trying to get ADFS and Web App Proxy setup.
    WHY?

    Given the growing importance of Office 365 and the role of ADFS in some of the larger deployments, that may happen. Someday.
    It is somewhat arbitrary.
    AD DS, AD CS, AD FS, and AD RMS are all considered components of Active Directory.
    I suppose that's what the AD stands for...
    Yet, most ADCS questions are posted and answered in the Technet Security forum.
    ADFS questions are often referred to Project Geneva.
    Directory Services has its own forum.
    Group Policy has its own forum.
    +++
    If you look in "related threads", someone asked a question precisely about ADCS:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/f6abf662-7927-4f72-91db-433c95eddcc8/why-isnt-there-a-forum-dedicated-to-certificate-services?forum=winserversecurity
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Project Server 2010 - Unable to open project, no valid Project Detail Page could be found for the project error

    I have a workflow being deployed for the first time on a farm. When I create a project with an EPT connected to the workflow it runs and can enter the required field in a PDP.  Then I Submit the workflow to go to the next stage and I get the "Unable
    to open project, no valid Project Detail Page could be found for the project" error.  After that the project is stuck on the same error.  All of the 18 stages have PDP and Schedules assigned to them.
    Any ideas on why the workflow cannot see the PDPs?  Is there a farm permissions that I am missing?  Thanks!

    Hi David,
    It starts to be a bit technical for me, but here is what I found on the web (seems to be an authentication issue with Sharepoint 2010):
    http://social.technet.microsoft.com/Forums/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the
    http://social.msdn.microsoft.com/Forums/silverlight/en-US/5cc70ff6-50d9-4cd3-b092-12007f4e495b/response-message-contenttypebindingtype-mismatch
    http://stackoverflow.com/questions/5263150/the-content-type-text-html-charset-utf-8-of-the-response-message-does-not-match
    Hope it will help you going forward in resolving your issue.
    Guillaume Rouyre - MBA, MCP, MCTS

  • How can I create a URL for a PWA for MS Project Server 2010 project file that includes the view?

    Hi, this question has been answered for 2013. The answer here suggests that it can be done in  2010.
    See:
    http://social.technet.microsoft.com/Forums/projectserver/en-US/3affdc4f-36bf-4381-8b75-27c73465efd4/action?threadDisplayName=how-can-i-create-a-url-for-a-pwa-for-ms-project-server-2013-project-file-that-includes-the-view
    Who knows how?
    Regards
    Sander

    Hi Sander,
    As far as I tested it, it is not possible either with PS2010. The URL only contains the PDP name and the projUID.
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

  • How do I create an installer for my project that allows for variable data entry like a server unc path?

    Hello All,
    I have a questions and a few hours of scouring the internet hasn't brought me much closer to an answer.
    Here's what I want to do. I have created a visual c# wpf application. I want to have an installer that during install time will have a text box or something where I can enter a server path as a string. Basically my application needs to know where to look
    for a server unc path \\server\somesharedfolder that it will be accessing primarily for its work. Secondly, how do I reference said information from within my code.
    I have come across application/user scoped settings, which appears to be what I'm looking for. However I can't find a way to have the installer prompt for a value "Server Path:" __________ that I could type into during installation. So far it appears
    the only way would be to edit the config.deploy file before running the installer, which isn't a big deal but you'd think there'd be an easy way to take in variables during install.
    EDIT: Apparently I can't edit the config.deploy file as I get an error message about the hash not matching.
    Thanks for your help!
    Lance

    Hello,
    The forums I found confusing, didn't know the best place to put this question so I put it here.
    I have found the answer over at stackoverflow and will detail here for anyone who may stumble across the same problem.
    The problem is ClickOnce seemingly doesn't support this feature. Installshield LE either doesn't or does but its incredibly too complicated if all you need is one variable passed to the registry during installation. And it seems the words used for googling
    this particular problem will never lead you to the solution.
    So here's how to do it (we will be first adding the Visual Studio Installer Add-on to restore original installer project functionality):
    1) Inside of visual studio 2013 go to Tools -> Extensions and Updates
    2) On the left-hand side click on Online -> Visual Studio Gallery
    3) In the upper-right search box search for "Visual Studio Installer"
    4) Download the extension labeled "Microsoft Visual Studio Installer Projects"
    5) Install, then open a new project under Templates -> Other Project Templates -> Visual Studio Installer -> Setup Project
    6) Now for the gold. In the solution explorer there are icons in a bar just below its title bar, highlight till you see "User Interface Setup" and open it.
    7) Now you can right click on Start, Progress, End etc any Category heading and hit Add Dialog.
    8) From here for my purposes, I used TextBoxes A
    9) Once you add it, click on it and observe its properties window. You will see Label, Property, and Value. Make a note of the property name as it will be used to store the data directly into the registry. *Note: there appears to be no way to perform data
    validation using the built in textbox dialogs, users can enter whatever they want and move on.
    10) Go to the registry editor on the same icon bar under solution explorer.
    11) Specify your registry folder, make a new value (I used string) and name it whatever you like. In the value section enter the property label formatted as such   [EDITA1]   depending on your value. 
    12) Now when you run the installer for your project, it will take data into that field and place it into the registry provided it has access to that key with the permissions you run the program under.

  • IMovie for Mac: "iMovie cannot open files in the "iMovie for iOS Project" format."

    Question, asked professionally
    When will iMovie for Mac be able to open iMovie for iOS projects?
    Question, asked snarkily
    Any reasonable expectation that we will ever be able to edit projects--created in iMovie on our fancy new expensive phones--in iMovie on our fancy new expensive laptops?
    Specs
    iPhone 6 Plus (contract-free, 128 GB)
    iOS 8.1.2
    iMovie for IOS 2.1.1
    MacBook Pro (Retina, 15-inch, Mid-2014)
    OS X Yosemite 10.10.1
    iMovie for Mac 10.0.6
    Error Messages
    iMovie for Mac: "iMovie cannot open files in the "iMovie for iOS Project" format."
    iMovie for iOS: "An error occurred during export."
    Frustration
    Manufacturer: Apple (a multibillion dollar company)
    The year: 2015
    Hours lost: Three Weeks
    Total costs for both devices: $4,000
    Background Details
    I just wasted thousands of dollars on these two hardware devices by making the rookie mistake of assuming projects were compatible across iMovie applications. However, the exported .iMovieMobile project files are in an incompatible iMovie for iOS Project format that iMovie for Mac cannot import. So I am stuck with a 15 GB .iMovieMobile project file--for an hour-long+ video--that I created and I was editing on my iPhone for weeks that I can no longer edit on my iPhone due to an error, nor potentially rescue the lost hours on my Mac, the sole reason I purchased it one day ago. The reason I can no longer edit the project on the iPhone is because iMovie for iOS suddenly stopped displaying the video of the project in preview, external display, etc. The clip snapshots remain visible and the audio remains audible, but the video appears fully black. Any attempt to export the video at any resolution generates an error message. (This error applies only to this project; other projects export without issue.) I can save to and from iTunes or iCloud without issue, but import into iMovie for Mac is unavailable for this latest version. Deleting and reinstalling the app does not resolve the issue. Nothing has resolved this issue; so I purchased the Mac as a last attempt, and it appears that I will have to begin the meticulously painful process of recreating the video from scratch with all the titling, sound effects, precise edits, transitions, organization, etc. This video was to surprise my mother for her birthday with "this is your life" footage, including my late father. It may seem like a small first-world problem, but such things carry big emotional impacts. What began as such a wonderfully intuitive and joyful experience has descended into a soul-suffering nightmare of catastrophic proportions. This software grinch stole christmas.
    Likely Suspect
    I believe this originated from Apple's confusingly designed iTunes client that removed videos used by iMovie for IOS during a sync, which I successfully restored back to the iPhone. This apparently resulted in iOS seeking and then claiming to find all of the videos, but somehow a bug in the coding causes the audio to play but not display video, and no way to resolve the bug from an enduser standpoint. I was hoping that iMovie for Mac would allow me a workaround, but I'll never know because the iOS and Mac formats are currently and dishearteningly incompatible.
    Suggestions
    I never performed a full backup of the iPhone, but I don't believe any of the iCloud nor local backups actually backup iMovie projects themselves anyway. (That's a fail.) So one must back them up manually to iTunes or iCloud.
    MANUALLY BACKUP YOUR PROJECTS DAILY, IF NOT HOURLY.
    MANUALLY BACKUP YOUR PROJECTS BEFORE IMPORTING OR SYNCING FROM ITUNES.
    MANUALLY BACKUP YOUR PROJECTS BEFORE IMPORTING VIDEO CREATED OUTSIDE  OF YOUR IOS DEVICE.
    Resolutions
    Hope Apple fixes this problem soon? Perhaps.
    Return the Mac to Apple, if they allow? Perhaps.
    Someone in this community will provide a magical workaround--that I haven't already attempted? Perhaps.
    As unlikely these options may be, I shudder to imagine that I may be forced to suffer no resolution and $3,000+ completely down the drain, because if iMovie for IOS worked as intended, I wouldn't have ever purchased the Mac as a last ditch effort to rescue the project. It meant that much to me to surprise my mother by attempting to retrieve this project file from oblivion--but to no avail.

    I appreciate you taking the time to copy and paste boilerplate responses to increase your points in this forum, but I've already read all those support articles in depth; but you have barely read my post at all. Please don't guess a fix. Only someone with the latest versions of iMovie, iOS, iPhone, Yosemite, and MacBook Pro is qualified to troubleshoot this, because anyone would immediately see that the following option no longer exists:
    Open iMovie on your Mac, and choose File > Import > iMovie for iOS Project.
    Read my post before you reply: It clearly says in the title and within my post that I can neither export nor import through iTunes without receiving an error message. So your response neither solved my question nor helped me whatsoever.

  • Missing Functionality -where do I set a budget for a Project?

    Budgeting for Projects is non - existent
    Budget for Profit and Loss for a particular project , How is it done ?
    Does not work , No facility to put in Budget for a project ?
    The report I am trying to run is:
    REPORTS>FINANCIAL>BUDGET REPORTS>Profit and Loss Statement Budget Report.Then go to Expanded and choose a PROJECT, say MailOrder.
    The result is that it will show the MailOrder project for the ACTUAL but it will show the whole company Turnover against the BUDGET column.
    This is because there is no place to set a budget for MailOrder Project in the first place. So the question is where do I set a budget for a Project?
    1 Budget setup screen - this has no facility to setup a budget for a PROJECT
    2.Budget Profit and Loss - this has the facility to run a PROJECT budget but the figures for the Budget cannot be right because they were not setup in the first place.
    PS MailOrder project is just an example.
    Version: SAP BUSINESS ONE 2007 A Patch Level 41
    Description of requirements: As above
    (Valid as of: (Date that this legal requirement is applicable) N/A
    Business needs: Customer cannot set the budget for a project and this effects their accounting.
    Examples: (Please describe a typical example, how the functionality should work.)
    Current Workaround: None.
    Proposed solution: Create a Project and then be able to set a Budget for it
    Edited by: Darpal Thiarha on May 14, 2008 10:34 AM

    Hi Darpal/Kerstin
    Please ignore my previous replies because I have now worked out why this idea will not work:
    Kerstins' idea is based on setting up new Nominal Codes for every Project and for Every Nominal Code in the Profit and Loss structure. Apart from the fact that this will create a messy Nominal Structure with hundreds of Nominal Codes, the main issue here is the way the Cost Of Goods Sold is structured. The logic of our Nominal Structure for Sales and Cost of Goods is based on Item/Item Groups and the Nature of these Items. In our case we sell Skin Care products under 3 Brands. Say Brand A, B and C
    So Brand A is summarised into one item Group and the ITEM GROUP is coded to Sales Nominal 20000 and the Cost of this group is coded to Nominal 30000. In Kertins suggestion, I would need to raise a Nominal Code 20001 for say Project Mail Order and 30001 for the Cost of Goods for Mail Order but this the Mail Order project is selling ALL our brands (A,B,C) - so you can see the problem here. You cannot use Nominal Codes for two different purposes and make it work. So the problem here is that my BRAND A summary will contain a Nominal with a Project Mail Order, that has SALES of Brand A,B,C. The Net effect will be that we will not be able to summarise anything in SALES and Cost of SALES in a logical way (Neither by Brand or By Project) and the Nominal Structure will be a mess.
    My conclusion is that SAP b1 Sales and Cost of Goods section demands certain logic when building the Nominal Codes, and this is based on the NATURE OF THE STOCK ITEM and trying to superimpose the PROJECT issue into this, will never work. In my view, the PROJECT issue needs to be sorted without involving New Nominal codes and the starting point would be in sorting out the SALES and COST of SALES and the project Budget for this.
    Please let me know if you need further illustration of the problem.

  • How can I save previews for old projects, while burning the project to DVD?

    I'll admit, I haven't read the user manual cover to cover (or screen to screen for the electronic version), and haven't spent hours combing the discussions here, but I have searched for all the relevant keywords I can think of and can't find a concise answer to this question.
    I get the basic idea of Vaults (I think), but haven't found much info about long term storage of projects. I'm fulltime freelance, but not super busy, and I can easily generate 100,000 images each year. I don't have the cash to be keeping all of these images in Aperture projects on external hard drives for eternity, and I'd be surprised if anyone else does. Good thing I'm not a medium format digital shooter producing 50GB each day huh?
    I remember seeing a clip of a photographer 2 or 3 years ago discussing the differences between storing digital and film images. He was making the point that throwing away files you don't think you'll need again can be a mistake, citing a shot he had of Clinton and Lewinsky together, before Clinton and Lewinsky were news. "If I'd been shooting digital, that image wouldn't exist today". It was a great pic, and when that whoel scandal erupted, it made him alot of money.
    So at present I'm storing every image I take in finished projects on DVD trusting that in the future I'll be looking for a shot of someone I may have shot 5, 10, 15 years ago.
    I caught part of a discussion that talked about keeping the preview files for all the images (and subsequent versions) for each project. I'd love to be able to keep lo-res previews/copies of everything I've shot to date, and have them immediately accessible on my hard drive, while my full size projects are safely stored on DVD, taking up space on a bookshelf rather than on my hard drive. Loading 10 DVD's worth of projects to see what's inside them is a headache I'd like to avoid if possible, in favour of instantly checking out lo-res previews to look a shot up.
    Is there an easy way to burn a completed project to DVD, but keep only the (lo res, lo size) previews on my hard drive?
    20" iMac and G4 Powerbook   Mac OS X (10.4.8)   "A creative and dynamic professional" (I lie alot and can't sit still)

    hello, kiwi
    quote: "Is there an easy way to burn a completed project to DVD, but keep only the (lo res, lo size) previews on my hard drive?"
    yes.
    maybe,...
    1. you might think of making DVD backups first prior to importing the photos into Aperture. "Store Files: In their current location" once in Aperture make low rez Previews, and export finished Project.
    or,
    2. bring in the photographs to hard drive first prior to importing the photos into Aperture. "Store Files: In their current location" once in Aperture make low rez Previews, and export finished Project.
    the low rez Previews will stay in Aperture but the high quality Versions will be exported onto DVDs and gone from the hard drive (if you delete the originals).
    another way would be to export small about 50-70 pixel wide high quality jpegs to a folder on your Desktop and import & keep these in Aperture Library as a reference. make metadata to show where the original Project DVDs are stored and DVD filing system used.
    victor

  • How to create the exe file for java project.

    How to create the exe file for java project.
    am done the project in java swing , i like to create the project in exe format, so any one help for me,
    send the procedure for that.
    thanking u.

    How to create the exe file for java project.Have you ever heard of google? I pasted your exact "question" into a google search:
    http://www.google.com/search?q=How+to+create+the+exe+file+for+java+project.
    and got several useful links.
    Better search terms might yield even better results.
    Sheesh.

  • LDAP design question for multiple sites

    LDAP design question for multiple sites
    I'm planning to implement the Sun Java System Directory Server 5.2 2005Q1 for replacing the NIS.
    Currently we have 3 sites with different NIS domains.
    Since the NFS over the WAN connection is very unreliable, I would like to implement as follows:
    1. 3 LDAP servers + replica for each sites.
    2. Single username and password for every end user cross those 3 sites.
    3. Different auto_master, auto_home and auto_local maps for three sites. So when user login to different site, the password is the same but the home directory is different (local).
    So the questions are
    1. Should I need to have 3 domains for LDAP?
    2. If yes for question 1, then how can I keep the username password sync for three domains? If no for question 1, then what is the DIT (Directory Infrastructure Tree) or directory structure I should use?
    3. How to make auto map work on LDAP as well as mount local home directory?
    I really appreciate that some LDAP experta can light me up on this project.

    Thanks for your information.
    My current environment has 3 sites with 3 different NIS domainname: SiteA: A.com, SiteB:B.A.com, SiteC:C.A.com (A.com is our company domainname).
    So everytime I add a new user account and I need to create on three NIS domains separately. Also, the password is out of sync if user change the password on one site.
    I would like to migrate NIS to LDAP.
    I want to have single username and password for each user on 3 sites. However, the home directory is on local NFS filer.
    Say for userA, his home directory is /user/userA in passwd file/map. On location X, his home directory will mount FilerX:/vol/user/userA,
    On location Y, userA's home directory will mount FilerY:/vol/user/userA.
    So the mount drive is determined by auto_user map in NIS.
    In other words, there will be 3 different auto_user maps in 3 different LDAP servers.
    So userA login hostX in location X will mount home directory on local FilerX, and login hostY in location Y will mount home directory on local FilerY.
    But the username and password will be the same on three sites.
    That'd my goal.
    Some LDAP expert suggest me the MMR (Multiple-Master-Replication). But I still no quite sure how to do MMR.
    It would be appreciated if some LDAP guru can give me some guideline at start point.
    Best wishes

  • Depreciation Expense For Related Project Assets

    Dear All,
    I have a question, Please help.
    How can I post depreciation expense from Oracle Asset to Oracle Project Costing for assets that working and assigned to Projects like equipments and Cars that assigned to project..... and we want to post their deprecation expense as burden in oracle project costing ????
    ++Please find the below my search conclusion in past few days.++
    1- Oracle Say that "There is currently no interface between Oracle Assets and Oracle Projects which allows you to post depreciation expenses directly to projects."
    2- I have non-complete idea: I have a project Segment in AFF so I can Post depreciation expense for related project assets to GL directly, with Project segment value and create Expenditure Batch in Oracle costing to manually enter depreciation expense as lump-sum in Oracle costing but it is not preferred to create Entries in Subledger Accounting and not send it to GL so my question in this work-around, Can I Create Expenditure Batch and only create Distributions 'PRC: Distribute Labor Costs' ???
    And don't create rest steps "PRC: Generate Cost Accounting Events,PRC: Create Accounting, PRC: Transfer Journal Entries to GL"
    Please suggest best solution or help me in my work-around, its urgent
    Thanks in Advance
    I Orouk

    Kindly find the below case as example ---
    There are 5 equipment like trucks and cars that working in project X100 so I want to show depreciation expense for the mentioned assets as Burden on the X100 Project in Oracle Project Costing Module..
    Please Consider the below focal points:
    1- Regarding Oracle Assets business Cycles. Oracle Assets send depreciation expense to GL directly and there is no any impact in Oracle Project Costing about Depreciation expense(for Project related assets )
    2- Project X100
    Project Cost = 10000 $
    Depreciation Expense for the 5 equipment (Project related assets) = 1000 $
    Real Project cost = Project Cost 10000 + Depreciation Expense for the 5 equipment 1000 = 11000 $
    I want to show Real Project cost in Costing Module so I have to record Assets Depreciation Expense for the Project related assets in Oracle Project Costing .... Can you help me about what the best way to record Assets Depreciation Expense for the Project related assets in Oracle Project Costing and please review my suggestion about expenditure batch in 1st post
    Thanks in Advance
    Iorouk
    Edited by: user12255659 on Jan 23, 2012 12:56 PM

  • Do we need to put the following code in the web-xml for the project to run

    Hi^^^,
    actually I have created a project in Eclipse WTP and I am running it from remote server. Its giving me 404 error when I tried to run it.
    I know 404 error is generally due to some error in deployment descriptor.
    I am going through this tutorial for creating project in eclipse WTP
    this says that I need to include the following code in web-xml. Please look at the quotes below
    "Web modules in J2EE has a deployment descriptor where you configure the web application and its components. This deployment descriptors is called the web.xml. According to the J2EE specification, it must be located in the WEB-INF folder. web.xml must have definitions for the Servlet and the Servlet URI mapping. Enter the following lines into web.xml:"
    "Listing 2. Deployment Descriptor web.xml"
    <servlet>
    <servlet-name>Snoop Servlet</servlet-name>
    <servlet-class>org.eclipse.wtp.tutorial.SnoopServlet</servlet-class>
    </servlet>
    <servlet-mapping>
    <servlet-name>Snoop Servlet</servlet-name>
    <url-pattern>/snoop/*</url-pattern>
    </servlet-mapping>
    My question is, it is necessary to include the above lines between <servlet> and </servlet-mapping> in web-xml
    thanks and regards,
    Prashant

    pksingh79 wrote:
    actually I have created a project in Eclipse WTP and I am running it from remote server. Its giving me 404 error when I tried to run it.
    I know 404 error is generally due to some error in deployment descriptor. what's the url you've put.
    <servlet>
    <servlet-name>Snoop Servlet</servlet-name>
    <servlet-class>org.eclipse.wtp.tutorial.SnoopServlet</servlet-class>
    </servlet> Every Servlet has to have a <servlet></Servlet> tag in the web.xml
    the <servlet-name>is for the naming the servlet and the <servlet-calss>is for class file of the servlet in your case the .class file is to be in the package of tutorial,if it's not then how the container will no where the calss file is
    <servlet-mapping>
    <servlet-name>Snoop Servlet</servlet-name>
    <url-pattern>/snoop/*</url-pattern>
    </servlet-mapping>You type something in your url likk http://localhost:8080/webappname (Tomcat server),so for url mapping instead of typing the entire class file name ,you just enough have to type what you've put in the <url-mapping> tag and it has to be inside of <servlet-mapping>
    I think the problem is in <url-pattern> change it like /snoop<url-pattern>
    My question is, it is necessary to include the above lines between <servlet> and ></servlet->mapping> in web.xmlSo now you think whether you need something inside <servlet>and </servlet-mapping>

  • Importing Word docs from a RH for Word project

    I have a HUGE RH for Word project that I'm trying to convert
    to RHTML (RH Office X5). We generate CHM with this project, and
    we've got map ids for all topics. I've been to Peter Grainge's site
    to get some ideas, but I don't think they're going to work. There
    are so many Word files and topics (537 and 2,974, respectively)
    that the more I think about it, the more I think that a conversion
    to RH HTML might not be worth it.
    When I tried to import all of the Word documents and also
    convert the TOC (converting the Index isn't an option since it
    never worked with our large number of Word docs) and use the
    HTMLHelp.css (using the Import wizard), RH HTML crashed twice after
    40 minutes.
    So, I created a new RH HTML project and tried to import just
    one Word doc from the RH for Word project, and selected the same
    wizard options. As I expected, the Word doc imported, but even
    though I told RH to split the topics on Heading 2, it also copied
    in the characters (#S+@) that preceded every topic heading and
    incorporated them into the Topic Title. AND, RH HTML did not
    "convert" the TOC - it was blank.
    In another post I saw a reference to this patch -
    http://www.adobe.com/support/security/bulletins/apsb07-10.html.
    I'm not sure it's related, although when I examined my second
    failed import attempt, the imported topics were visible in the
    project folder only by using Windows Explorer - RoboHelp HTML did
    not display them from within RoboHelp.
    Does anyone know if this is the patch that will fix this
    issue as well?
    By the way, based on the number of questions I've seen posted
    about RH for Word 7 with zero replies, I'm thinking I'm going to
    run into issues as well, even if we leave it in RH for Word when we
    upgrade to version 7. It seems that its size is an issue for RH
    HTML.
    Thanks,
    Jim
    Thanks,
    Jim

    Hi Jim,
    just as an encouragement: we sucessfully converted a HUGE RH
    for Word project (4,300 topics) to RH HTML a while ago, including
    TOC, index and everything. I must admit though that we had all
    those topics in only 25 word documents. Maybe you can reduce the
    number of documents by moving the topics? There will always be
    problems you run into and afterward, we had to go through every
    single topic and check the formatting, but I guess you'd always
    have to do this. But I think it's worth it, working in HTML is so
    much more convenient.
    Good luck!
    Kathrin

Maybe you are looking for