Questions on publishing

I have an interesting scenario, I have used iWeb to redesign a website for the student government at my university, and am considering moving the site from my .mac to their servers so that it may serve at higher speeds for students on-campus. Is it possible to publish to their servers and keep the .mac features for the site? *Note - I'm trying to see how much I can extract out of iWeb, because its easy to use and therefore good for other people other than me to update the site after I'm out of college.

Anything that requires server side software to implement will not work. If your site has a blog page it won't work on the other server. Neither will iWeb's hit counter. I think the other features will work however.

Similar Messages

New Questions.. publish iMovie to iDVD

SDMacuser & J Keller,
Thanks for all your help, however as I work through things more questions arise
I'll cut & paste entries and new questions under..
But before I do that just want ya'll to know that I cleaned up old versions of various DVD projects and found that any Garage Band mix (sometimes mix 2 or 3 versions) takes up a ton of bytes, so I deleted versions I was not using.
BLUF I went from 20gb to 31gb free hard drive space, short of the 40gb recommended but better than before
OK on to other questions:
SDM A: Welcome to apple discussions. Might not be the TV unless you set it to overscan. If this isn't the case then the easiest way IMO is to drag and drop the movie to iDvd's slideshow feature where it will properly scale the movie for you.
Q: Want to make sure I understand.. So in iMovie to media browser a 'large' (better quallity) movie and publish. Then in iDVD when you select the published movie, instead of dragging it to the movies drop; you drag it to the slideshow drop and that will automatically resize for TV. Is that correct?
SDM There's also the option w/in iDvd for setting up "TV safe area" and making sure none of the titles or buttons fall outside the TV Safe area. The TV Safe area is shown in a thin red outline below.
Q: Did this, saw it on the menu iDVD page, but could not get that red frame to show during either the preview (small window) or the large play window. Is it possible to do this? Since I have now burned two drafts that play fine on the computer but run-off on the TV.. Not anxious to repeat this failure
Q: Also when I selected TV Safe .. the computer seemed to process for a bit ..
Does that mean that ther movies have been resized?
This morning (under a time constraint), in iMovie (selected from iDVD) I published a large movie (where a small movie with teh same title was) took about 20-30 minutes .. did not make a separate iMovie but filled in teh large box in the iMovie app .. Q: so is this a small or large movie (both are filled in)?
So Lastly, in order to fix what I've doinked up here:
republish all (currently small) movies as large movies
start a new iDVD project and place the movies in the slideshow drop area
burn
G5 Mac OS X (10.5.8) Leopard 2Ghz

SDMacuser & J Keller,
Thanks for all your help, however as I work through things more questions arise
I'll cut & paste entries and new questions under..
But before I do that just want ya'll to know that I cleaned up old versions of various DVD projects and found that any Garage Band mix (sometimes mix 2 or 3 versions) takes up a ton of bytes, so I deleted versions I was not using.
BLUF I went from 20gb to 31gb free hard drive space, short of the 40gb recommended but better than before
OK on to other questions:
SDM A: Welcome to apple discussions. Might not be the TV unless you set it to overscan. If this isn't the case then the easiest way IMO is to drag and drop the movie to iDvd's slideshow feature where it will properly scale the movie for you.
Q: Want to make sure I understand.. So in iMovie to media browser a 'large' (better quallity) movie and publish. Then in iDVD when you select the published movie, instead of dragging it to the movies drop; you drag it to the slideshow drop and that will automatically resize for TV. Is that correct?
SDM There's also the option w/in iDvd for setting up "TV safe area" and making sure none of the titles or buttons fall outside the TV Safe area. The TV Safe area is shown in a thin red outline below.
Q: Did this, saw it on the menu iDVD page, but could not get that red frame to show during either the preview (small window) or the large play window. Is it possible to do this? Since I have now burned two drafts that play fine on the computer but run-off on the TV.. Not anxious to repeat this failure
Q: Also when I selected TV Safe .. the computer seemed to process for a bit ..
Does that mean that ther movies have been resized?
This morning (under a time constraint), in iMovie (selected from iDVD) I published a large movie (where a small movie with teh same title was) took about 20-30 minutes .. did not make a separate iMovie but filled in teh large box in the iMovie app .. Q: so is this a small or large movie (both are filled in)?
So Lastly, in order to fix what I've doinked up here:
republish all (currently small) movies as large movies
start a new iDVD project and place the movies in the slideshow drop area
burn
G5 Mac OS X (10.5.8) Leopard 2Ghz

Question about publishing Calendar and URLs

Hi everyone, have a question that hopefully knows the answer too. I have been researching on how to publish individual user calendars to external users.
I have seem to come across 2 different ways to do this
1) is to right-click on my calendar in OWA, then I select the external recipient and it emails the recipient a long url similar to:
http://webmail.mydomain.com/owa/calendar/[email protected]/4d9f8b52769b4ddca3e51f6f82d01b6f1902995877095312719/S-1-8-2306188436-3125773453-2945785077-3615357645/reachcalendar.html
2) Within Outlook 2013, I click on "publish calendar" and it takes me to an ECP url for my exchange server where I can select how many months I want to share, the permission they can see, etc... and then it provides me at the bottom with two links
like:
http://webmail.mydomain.com/owa/calendar/[email protected]/Calendar/calendar.html
My question is what are the differences between these two methods and also, both of these urls will NOT work unless I change them to HTTPS instead, how I can modify the links that get emailed out? I did see for the 2nd method above I can set it using the
"PublishedCalendarUrl" in Powershell, but that is impractical for a lot of users.
thanks!

Hi BMIG,
Please re-start IIS for testing.
If not working unfortunately, please use IIS Manager to simplify the OWA url and force redirection to SSL.
Steps as below:
1. Start IIS Manager.
2. Expand the local computer, expand Sites, and then click
Default Web Site.
3. At the bottom of the Default Web Site Home pane, click Features View if this option isn't already selected.
4. In the IIS section, double-click HTTP Redirect.
5. Select the Redirect requests to this destination check box.
6. Type the absolute path of the /owa virtual directory. For example, type
https://mail.contoso.com/owa.
7. Under Redirect Behavior, select the Only redirect requests to content in this directory (not subdirectories) check box.
8. In the Status code list, click Found (302).
9. In the Actions pane, click Apply.
10. Click Default Web Site.
11. In the Default Web Site Home pane, double-click SSL Settings.
12. In SSL Settings, clear Require SSL.
13. For the new settings to take effect, open a Command Prompt window, and then type
iisreset /noforce to restart IIS.
Details in the following article:
Simplify the Outlook Web App URL
http://technet.microsoft.com/en-us/library/aa998359(v=exchg.150).aspx
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Require to select atleast 1 point for the question to Publish the CBT

Hi,
I am using Adobe Captivate 4.0 version. I have made my CBT AICC compliant to upload to an LMS System.
In my CBT I have Multiple Choice Questions to test the understanding while taking the training and they are NOT required for posting credit to the LMS System.
Therefore, I have assigned 0 points to individual questions and unchecked "Report Answers" checkbox.
However, the publishing bar hangs and I am unable to complete publishing the project.
Alternatively, if i select 1 point also for only 1 question in the project, the project is able to complete publishing.
What is the reason for it? Is there a workaround where I can assign 0 points to all questions so that I do not face issue in the LMS system.
Thanks!

Hi,
I can explain how an rework order is created with
reference op set.
First check in Tcode OPJF for the selection id a
Priority is defined for the Task list type S
with usage 1 and status 4 and then Proceed as
follows.
1. First create a Reference op set in tcode Ca11.
Enter the plant,Description , usage and status
for the ref op set
Enter lotsize and unit of measure.
Enter the op as 0010 / workcenter/op control
key/Description for the op
Enter the standard values and save.
2. Create a Standard trigger point in CO31.(Ex
Production)
Enter the Trigger Point usage /Group as FERT.
3.Tick the Trigger Point Functions.
4. Enable the indicator create order with Reference .
5.Enter the system status as PCNF.
6. Enter change as +.
7. Enable the indicator once.
8 . Now place the cursor on the create order with reference.
9. Goto Parameters.
10. In the Parameter enter in the group the created Reference op set group no.
11. Order type as PP01 and group counter as 1 and save the Trigger Point.
12. Now goto the Routing for your Material.
13. Choose the last op to assign the Trigger point.
14 .Select the OP -
> Goto ---> Trigger Point overview.
15. Enter the Trigger Point usage as FERT.
16.Now choose that line ,select the Details---> Trigger Point
17. The system will says standard trigger point exists from which you can
select the created Trigger Point (EXx Production)and save.
18. MD02/MD04.
19. Convert the Planned Order into Production Order and Release the order.
20 .Now confirm th ops.
21. For the last op enter the yield and rework qty
and set the status as PCNF.
22. If the status of last op is PCNF then in the
system a POP UP will appear as Activited by
Trigger Point /Create order with reference/order
number/sequence and op number which trigger point
works and enter.
22. Now a rework order will be created.
23. In c003 enter the number which is next to the actual prodn order no.Rework
order will be seen.
Regards,
nandha

A few quick questions about publishing for iPhone/Android

I'm currently developing an iPhone/Android game in CS5 and I just have a few quick questions. If anyone can answer even one or two I'd really appreciate it
1- I'm developing using a 320 x 480 resolution for the iphone. When I tested it, the status bar on the top of the screen makes the edges disappear. How should I turn off the status bar? And if I can't what resolution should I use?
2- The performance is a little slow, and the game isn't very intense at all. What's a good way to improve performance?
3- For Android, what should I do for the resolution? Is there a standard resolution or do I have to have multiple resolutions for multiple devices?
4- Finally, is it worth getting the free trial of CS5.5 before I publish? Is there anything in there that will be a huge improvement over CS5?
All help is appreciated

1. Publish in fullscreen
2. Use bitmaps, cache all bitmaps, use minimized looping structure etc.
http://www.yeahbutisitflash.com/?p=986
3. Android: 480 * 800
4. Not that much, but you have GUI updates and have a GUI publishing screen for packager for iphone too.

Question about publishing from a small agency

Hi,
my apologies if this question has already been asked, but I've not been able to find a clear answer yet looking through here.
I work for a small agency. We prepare materials for a small number of sales reps (less than 50) for about 4 clients. All of these reps will soon have iPads, and we are preparing materials solely for iPad use. We do not prepare materials for public consumption - we know in advance who all of the users of our pepared materials will be.
I've been reading through the DPS materials, and I've experimented with the Folio tools in InDesign. My questions concern distribution.
Since we have such a small number of people that we need to send materials to, do we even need to purchase a DPS license? It seems as though I can prepare multiple folios in InDesign and send them up to the Folio Producer. I can then share them by using the 'Share' button there and typing in the email addresses. As long as the recipient of the email has an Adobe login, and has the Adobe Viewer app on their iPad, it seems like they can load the folio. In this scenario it doesn't seem like we need to use the Distribution Service? But I'm wondering if there are limits to the number of folios we can send up to the Folio Producer, or if there is a limit to the number of people we can send out materials to using the 'Share' method?
If my assumption is correct, and we don't currently need a DPS license, I'm wondering what advantages we could get from a license (DPS Pro Edition for example). I think these could be:
- if we want access to analytics?
- if we want to be able to package as a native iOS app and sign using an Apple enterprise distribution certificate?
- if we want to have a custom version of the Viewer?
Thanks for any assistance you can provide.

Hi Rkapper,
No, you don't need to purchase a DPS license if you want to distribute via sharing. You can also set up a single account using an email address such as publish@"mydomain".com and everyone logs in with that address.
Is there a limit to the number of Folios, No, but I think there is a limit of 2GB, you would need to pay for a monthly Acrobat.com account to put up more data.
The advantages you get with a license: yes, yes, yes and support.
Tony

Does Articulate Quizmaker display questions when published to Adobe Connect?

This may have (probably has) already been discussed in the forum, but after searching, I simply can't find it.
When publishing quizzes from other products like Adobe Presenter, Captivate, etc. into Adobe Connect Pro 7, the questions DO display when running reports. However, when I publish quizzes from Articulate Quizmaker, the questions DO NOT display.
After searching the LMS Support area (http://www.articulate.com/support/quizmaker09/kb/?cat=3), it looks like only the question ID will be published into Adobe Connect. However, that is incredibly difficult to quickly glance to understand information in Adobe Connect reports because, as much as I would like to think I am a genius, I just can't memorize what question ID's go with what question.
If this is a limitation, has anyone found a workaround or do we know if future versions of Adobe Connect or Quizmaker will offer any solutions to this?
I have attached a Word document that displays the difference for a visual. Thanks in advance for any assistance you can offer. Still love you all, either way!
Keepin' the joy,
Patti Bryant
Click the link below to view a visual:
http://dl.dropbox.com/u/37915372/Reporting%2BDifferences%2Bin%2BAdobe%2BConnect.doc

Hi there
Unless things have changed, I believe that the Right-Click ability relies on JavaScript. I suppose it's possible that Connect doesn't present things by handing off all the files involved and it is somehow wrapping the Captivate within its own wrapper and thereby ignoring the JavaScript Captivate creates that makes the magic happen.
Hopefully Lilybiri, Rod, Eric or another will come along and either confirm or refute my belief,
Cheers... Rick

Please answer the simple question about publishing Web Services!

I have implemented my first web service GetDate, using JDeveloper.
Could anybody tell me please how can I place now this web service on the web, on my web page?

Dear Shay, thank you a lot!
But it seems to me that you didn't understand my question or may be I have explained it not in the best way.
I have done every step from this tutorial, I have deployed me web service to OC4J Server, and it works.
What I need now, is to make this service available on my home page, which doesn't have Oracle Application Server, so that every person on the internet (even if he also doesn't have this application server installed on his computer) can use it.
Is it possible to do so or not?

Question XML Publisher working with Olite ?

Hi,
Want to know if XML Publisher is supported to work with Oracle Lite?
Secondly wanted to know if a customer already has license for IDS 10g and IAS 10g should they by separate license to use XML Publisher?
Cheers
Vivek

Hi Vivek
Im just trying to get OLite running on my laptop to confirm but looking at the documentation its has a jdbc connection therefore XMLP can connect to it :o)
I'll ty and confirm in the next day or so.
On the licensing, please contact you sales account rep.
Regards
Tim

Questions about publishing database articles?

what is the requirements of publishing my Technical database related article on oracle magazine.
Please let me know.
Thank you very much
azad, Mohammed
DBA
La county-DCFS

http://www.oracle.com/oramag/misc/submit.html

Questionable Flickr publishing behaviour

I'm a long time user of Lightroom 1&2, just trying version 3. Up until now I've been using Jeffrey's Flickr upload plugin but the built in publisher is the single biggest draw for me to upgrade. There's a problem though:
I've set up a couple of smart photosets. One for my Hipstamatic shots and one for my 5* photos. When Lightroom publishes to Flickr it seems to upload the photos that occur in both sets twice, instead of uploading once and then adding them to the two sets. This behaviour is plain broken. I want one copy of the photo with one set of comments and one set of views. That single photo should be in two sets.
Am I misunderstanding something or should I submit a bug report?

Wow, that is one shocking bug reporting system. And well hidden too. I spent 15 mins clicking around the support site trying to submit a bug before eventually searching in the forum and finding the link. (Here, if anyone else needs it: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform).
Only to be told, after I'd filled out the form that:
"Due to the volume of submissions we receive, responses to inquiries are generally not possible. However, we may contact you if we need clarification on your submission."
That is not acceptable, in my opinion. I'm a paying customer and I've taken _my_ time to submit a bug report. I expect the courtesy of a reply.
Ho hum.
So this issue is Google-able I've pasted the bug report below...
******BUG******
Concise problem statement:
A photo that appears in multiple Flickr smart photosets gets uploaded multiple times.
Steps to reproduce bug:
1) Add tags "test" and "dupe" to a photo.
2) Create a Flickr smart photoset of photos having keyword "test".
3) Create a Flickr smart photoset of photos having keyword "dupe".
4) Publish both sets.
Results:
You'll have two separate photos in your photostream.
Example:
http://www.flickr.com/photos/mikesten/4920623828/in/set-72157624790402014/
http://www.flickr.com/photos/mikesten/4916415118/in/set-72157624780952482/
Expected results:
The photo should be uploaded _once_ (and so get one set of comments and one count of views) but be _added_ to the photosets.
Example:
http://www.flickr.com/photos/mikesten/254443237/in/set-72157594302613079/
http://www.flickr.com/photos/mikesten/254443237/in/set-72157594314026167/

ICal installation questions / and publishing in local network

hello guys,
i am really sorry but i am not a "real" admin and i just have to get ical service running.
our target: publish a ical on our server so that other people can acess it
our situation:
- os x server 10.5.4.
- os clients 10.5 and 10.4
- all in a local network (we dont need it in the internet)
i started open directory master and i cal service is running as well (both green light in the server admin) our standard network user has the button for calendar usage/publishing activated. now i am a bit lost how to go on
i went to my local machine and tryed to publish a calendar but firs challenge:
- what domain do i type? http + server IP (172.17.0 ....) and then?
- i can use one of the standard users with this ical button activated or do i need to create this userrs also somehow in OD?
help is really apreciated, thanks!
jfk

Actually, you may not need the calendar server at all. If you want a single user to publish calendars for others to read/only then you can just use WebDAV publishing. Works great and is simple to setup and use.
Note that this is only an option if you want users to publish their calendars for others to read but not write to. If you want multiple-writer calendars or to use the cool availability window or locations and resources you should use the iCal Server.
Publish and subscribe WebDAV calendars has been a feature of iCal (client) for a long time. To use it all you need to do is enabled a Web site in Server Admin and set up a realm with read/write access for the appropriate user(s). In my example, I am assuming that you tust your users not to delete each other's calendars...
The step-by-step is going to take up more space than I have here so I'm going to post some instructions to my site at http://adozendozen.com/
I should have step-by-step instructions up later today.

Question about Publishing Application URL

Hi All,
I've done a bit of digging, and think this is probably not possible using an APEX application hosted by oracle on apex.oracle.com, but I wanted to post here and check just in case I was wrong.
I've installed the packaged APEX 'discussion forum' application into a workspace set up for me on apex.oracle.com.
Reading through the user guide on publishing the app url, they say to give http://apex.oracle.com/pls/otn/f?p=<app#>:<page#> to the users.
This is fine, but as this is for a small forum, I was wondering if there is any way to get a nicer url, even if just something like http://apex.oracle.com/pls/otn/my_unique_forum_name.
I've seen that if I was hosting myself I could use apache to rewrite my preferred url to match the required app#:page# format, but is something like this possible for an app hosted on apex.oracle.com?
If anyone knows if this is possible/impossible - let me know.
Thanks,
Tony

Hi Chris,
Getting some compilation errors here. Can you explain to me you the compiler will understand f?p=102:1;
Here is my procedure:
create or replace procedure "FORUM"
is
begin
f?p=12345:4;
end;
And the compiler errors with the following:
Compilation failed,line 4 (13:45:14)
PLS-00049: bad bind variable '4'Compilation failed,line 4 (13:45:14)
PLS-00103: Encountered the symbol "?" when expecting one of the following: := . ( @ % ;
Do I need to escape the colon somehow to avoid interpretation as a bind variable?
Thanks for the clarification, and sorry if this should have been obvious ;)
Tony

Can interactive quiz questions be published to You Tube

I am a new content developer, and am trying to publish an elearning program to YouTube. This particular program has an interactive quiz at the end. Is there any way that a video on YouTube can maintain the interactive qualities of an elearning program? My gut tells me no, but I thought I'd check here first before going back to the client.

Hello,
Welcome to Adobe Forums.
On Videos there is no interactivity, if you check Vidoes on Youtube, you won't find any interactivity.
Thanks,
Vikram

Question after publishing to folder

I published a site to a folder and uploaded it etc. I then deleted it in Iweb because I thought I had it in Iwebuddy but I guess not. Is there a way to bring it back from the folder into Iweb to edit some changes?
thanks

You guessed right. It's gone.
And iWeb does not import published pages.
Perhaps you have a backup of the domain file. This document explains where to find it. Not the Backup, but the original. And where to put it back.
http://docs.info.apple.com/article.html?artnum=303045
iWebbuddy needs that domain file to perform its duties.

Questions on publishing

Similar Messages

Maybe you are looking for