Questions regarding Portal Installation

Hi Experts,
I want to install portal and I have following questions;
1- We are on ECC 6.0 & I want to install portal. Can I install it on separate machine? What are the recommendations, how it should be installed. I mean on ECC app server or on different machine?
2- I want to install the original corporate version not sneak preview which expires after 90 days. Having said that, Do we need to purchase separate portal installation CD's or it comes with standard ECC 6.0.
3- Having ECC 6.0, what else we need to install for getting the portal in running shape like java stack etc..?
Your help will be highly appreciated.
Thanks,

Hi,
> 1- We are on ECC 6.0 & I want to install portal. Can I install it on separate machine? What are the recommendations, how it >should be installed. I mean on ECC app server or on different machine?
>
It depends upon how much resources machine have. If you have sufficient resources then you can install on same machine. But I would prefer to install Portal on separate machine as Java is resource intensive.
> 2- I want to install the original corporate version not sneak preview which expires after 90 days. Having said that, Do we >need to purchase separate portal installation CD's or it comes with standard ECC 6.0.
>
For Portal you need to have separate license with SAP unless and until you are not installing ECC 6.0 dual stack system. Also, from Business Suite 7, you cannot install dual stack system.
> 3- Having ECC 6.0, what else we need to install for getting the portal in running shape like java stack etc..?
>
If you are installing portal then Java stack will come in it. I would suggest you to read installation guide.
Thanks
Sunny

Similar Messages

  • Question regarding the installation of a J2EE 6.40 Add-in

    Hi all,
    I would like to install a J2EE engine on a test instance of ECC 5.0 and have a few questions regarding the installation...
    Do I have to use the MASTER CD to first install the J2EE engine (Support Package 0) and then apply the latest support packages found on the SAP Marketplace?
    Or should be able to directly install the J2EE Add-In by using the latest support packages found on the SAP Marketplace?
    Best regards,
    Xavier Vermaut

    Thanks Bhavik for your reply,
    That's what I actually thought but I get the following problem... Here's what I wrote into my customer message... I am still waiting for an answer and would like to get this solved ASAP
    Dear SAP,
    We would like to install the J2EE 6.40 Add-In on our ECC 5.0 instance
    (TST) but get the following error message at the very beginning of the
    installation
    > Cannot find an installed ABAP system, which is a prerequisite for a
    > J2EE Add-In installation. The installation cannot continue.
    We checked the installation logs (sapinst_dev.log) and found the
    following :
    > Found these instances:
    > sid: MGR, number: 00, name: DVEBMGS00, host: erpqs1a
    > sid: TST, number: 10, name: DVEBMGS10, host: erpqs1a
    Why does the installation say that it can not find any ABAP systems when
    having previously found the 2 different instances running on this
    server?
    Would this problem be related to the fact that we have two instances on
    this server?
    Please find hereunder the way we performed this installation :
    01) Download of the 4 different parts of SAP J2EE Engine 6.40 SP 10
         (Solaris 10 - Oracle)
         Part I   : SAPINST10_0-20000121.SAR         (Solaris 64)
         Part II  : CTRLORA10_0-20000121.SAR         (Solaris 64)
         Part III : J2EERTOS10_0-20000121.SAR        (Solaris 64)
         Part IV  : J2EERT10_0-10001982.SAR          (OS Independant)
    02) Extract these 4 archives into /install/J2EE_640
    03) Check Java Version and Environment Variables
    04) Check Solaris Pre-Requisites
    05) Adapt "product.xml" as specified in OSS Note 697535 (IGS)
    06) Log in as 'root'
    07) Set DISPLAY environment Variable
    08) Move to the Installation directory
          ( /install/J2EE_640/SAPINST-CD/SAPINST/UNIX/SUNOS_64 )
    09) ./sapinst
    10) In the 'Welcome to Netweaver Installation' screen, select
          => Dialog Instance Finalization
    Any idea how to get this solved?
    Best regards,
    Xavier Vermaut
    Message was edited by: Xavier Vermaut

  • Equium M50-216 - Question regarding new installation

    Hi there,
    Recently rescued an Equium M50 laptop from my flat mate. Was in a bit of disrepair. she said i could have it as couldn't get onto the internet and it appears to be missing some vital files.
    Managed to get the wireless working again and removed some of the rubbish that was on it, but there are some bigger issues for instance. Anything USB I plug into it will not install as there are no drivers on the HDD.
    I think it probably needs to be formatted and have Windows XP Home Edition reinstalled but I don't have any disks for it and don't want to spend hundreds buying new software for it. Please let me know what my best options are.
    best regards
    Ed

    Hi there,
    I have updated windows fully, although there are 7 updates that fail to install. all of them related to Windows Net Framework. Have removed previous installations and tried again to no avail.
    Plug and play devices that should install automatically do not install. I have two USB sticks that install automatically (plug and play) on several computers and laptops but both fail to install on this laptop.
    When asked to install i have a choice of automatic or choosing a destination myself, i choose Auto.
    When that fails i choose 'from a specific location' which also fails, and then i choose the option 'Don't search. I will choose the driver to install'.... in this part there are no drivers to choose from. its like the driver folder has been wiped.
    Anyone ever had this problem?
    Cheers

  • A mac question regarding the installation of the JLex scanner

    Hi
    I'm trying to run JLex on my Mac running Tiger and Java 5. I am trying to run JLex but when I try and run the program I keep getting exceptions.
    I think the problem here is with the classpath. I've been looking around online and can't seem to find directions for altering the classpath on a mac.
    The instructions for installing and running JLex aren't proving enough for me to get it to work. These instructions are:
    Written by Elliot Berk  [edited by A. Appel] [revised by C. Scott Ananian].
    Contact [email protected] with any problems relating to JLex.
    The following steps describe the compilation and usage
    of JLex.
    (1) Choose some directory that is on your CLASSPATH, where
        you install Java utilities such as JLex.  I will refer
        to this directory as "J", for example.
    (2) Make a directory "J/JLex" and put the sourcefile Main.java
        in J/JLex.
    (3) Compile Main.java as you would any Java source file:
    javac Main.java
    This should produce a number of Java class files, including Main.class,
    in the "J/JLex" directory, where "J" is in your CLASSPATH.
    (4) To run JLex with a JLex specification file,
    the usage is:
    java JLex.Main <filename>
    where <filename> is the name of the JLex
    specification file.  If java complains that
    it can't find JLex.Main, then the directory
    "J" (which contains the subdirectory "JLex"
    which contains the class files) isn't in your
    CLASSPATH; go back and read steps 1-3 more
    carefully, please.I am guessing the problem I am having here is with setting the class path on a mac. If anyone can give me some help with this I would be really grateful.

    Creating this sort of trigger, though
    - would require that the user create triggers for every table they create
    - wouldn't prevent the user from deleting or disabling the trigger, deleting rows, and then re-enabling the trigger
    If I own a table, I will always be able to delete, insert, and update rows in that table. That's one of the privileges of ownership.
    I suppose that you could grant a user CREATE ANY TABLE privileges, let them create tables in another schema, and then have DDL triggers that only grant them appropriate privileges on those new objects. The CREATE ANY TABLE privilege, though, would be a huge security hole...
    Justin

  • Does Visual composer requires enterprise portal installation?

    Hi all,
    Does Visual composer requires enterprise portal installation?
    or can it be installed standalone and used standalone.
    Also does Visual composer reuires BI-JAVA stack,
    or can it run on BI-ABAP stack also
    Thanks all,
    Regards,
    Robert

    Hi ,
    Thx Markus,
    one more question...
    Is VC a stand alone application/package by itself that does not require EP or does it come with EP.
    Thanq.
    Regards,
    Robert.

  • How to integrate to full iAS Portal Installations to syncrhonize users

    I ha ve to full iAS Portal Installation with it's own OID Repository my question is how can I syncrhonize both OID Respository so when I create or modify a user in OID this change is propagate and This will let use a single user definition to access both portals
    Regards
    Anibal

    Hi RM,
    It would require that you setup your Portal in such a way being able to handle Windows Integrated Authentication via Kerberos. This is already very well explained in the following blogs:
    /people/wai-hon.lam/blog/2006/04/20/windows-integrated-authentication-via-kerberos-on-an-ldap-data-source
    http://wiki.sdn.sap.com/wiki/display/EP/SingleSignOntotheJ2EEEnginefromWindows
    After setting up your datasource, in your case the ADS, you will need to run SPNego Wizard in NWA to have it integrated with SSO.
    Best regards,
    Andre

  • I have some questions regarding setting up a software RAID 0 on a Mac Pro

    I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
    These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
    A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
    The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
    Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
    It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
    My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
    I should be most grateful to receive advice regarding the following questions:
    QUESTION 1:
    I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
    If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
    Or would I have to reinstall the OS, applications and software again?
    I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
    QUESTION 2:
    I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
    Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
    Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
    QUESTION 3:
    Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
    Or would this not be of any use anyway, in the event of a single drive failure?
    QUESTION 4:
    Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
    QUESTION 5:
    If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
    Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.

    Well said.
    Steps to set up RAID
    Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
    1. Open Disk Utility (/Applications/Utilities).
    2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
    3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
    4. Name the RAID set.
    5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
    6. Click Create.
    Recovering from a hard drive failure on a mirrored array
    1. Open Disk Utility in (/Applications/Utilities).
    2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
    3. If an issue with the disk is indicated, click Rebuild.
    4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
    5. Repeat steps 1 and 2.
    6. Drag the icon of the new disk on top of that of the removed disk.
    7. Click Rebuild.
    http://support.apple.com/kb/HT2559
    Drive A + B = VOLUME ONE
    Drive C + D = VOLUME TWO
    What you put on those volumes is of course up to you and easy to do.
    A system really only needs to be backed up "as needed" like before you add or update or install anything.
    /Users can be backed up hourly, daily, weekly schedule
    Media files as needed.
    Things that hurt performance:
    Page outs
    Spotlight - disable this for boot drive and 'scratch'
    SCRATCH: Temporary space; erased between projects and steps.
    http://en.wikipedia.org/wiki/StandardRAIDlevels
    (normally I'd link to Wikipedia but I can't load right now)
    Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
    To help understand and configure your 2009 Nehalem Mac Pro:
    http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
    http://macperformanceguide.com/
    http://www.macgurus.com/guides/storageaccelguide.php
    http://www.macintouch.com/readerreports/harddrives/index.html
    http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
    http://kb2.adobe.com/cps/404/kb404440.html

  • Questions on Portal branding

    Dear Portal specialists,
    Some questions on Portal branding :
    1) Can I include a logo file on the top LHS where we see "WELCOME" user.
        We dont want to customise it.
    2) Can we move the "WELCOME " user to the middle of the page.
    Thanks.

    Check these link.. and pick up one which suits you:
    Simplest is to replace the existing branding images , you can achieve it by
    1) Go to Administration -> System Configuration ->
    UM Configuration -> Direct Editing.
    2)Change the following entry to match your
    image or change the brandingimage.jpg:
    ume.logon.branding_image=/logon/layout/mybranding.jpg
    3) The correct path where to save the file would be:
    <Drive>:usrsap<SID>JC<Instance_Nr>j2eeclusterserver0appssap.comcom.sap.security.core.adminservlet_jsplogon
    ootlayout
    You can read other methods in following discussions..
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a000df6b-586a-2910-e6be-9fee831d5a30
    https://forums.sdn.sap.com/click.jspa?searchID=3607153&messageID=479378
    Portal Branding image-Front Screen
    https://forums.sdn.sap.com/click.jspa?searchID=3607153&messageID=3668790
    Hope this helps.
    Regards,
    Sudhir

  • Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from 2007 it came preloaded with tiger. I have original install tiger discs version 10.4.10. Is it safe to downgrade or not please help

    Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from Sep 2007 it came preloaded with tiger. I have original install (2) tiger discs version 10.4.10.  I want to know if it is safe and what are the necessary steps to do so. Also by downgrading im wondering if a lot of apps nowadays support tiger for example I have photoshop version 5 and 4 these are very important to me. One last question does anyone know of any reliable virus protection for mac that doesnt slow down your computer? because I have read that a lot of them do so. If anyone can help me I would greatly appreciate it! Here are the specs for my iMac 
    Model Name:
    iMac
      Model Identifier:
    iMac7,1
      Processor Name:
    Intel Core 2 Duo
      Processor Speed:
    2 GHz
      Number Of Processors:
    1
      Total Number Of Cores:
    2
      L2 Cache:
    4 MB
      Memory:
    2 GB
      Bus Speed:
    800 MHz

    Most of the time a perception of general slow performance is the result of installing third party junk alleged to speed up, "clean" or "optimize" your Mac, or to look for viruses that don't exist. Ideally you would know what you installed so you can uninstall it, but if you don't know or aren't sure there are techniques such as Safe Mode and creating a temporary user account to confirm that suspicion.
    If you open Activity Monitor it may show a process, or processes, that occupy a lot of your system's time.
    Slowness confined solely to web browser activity is often the result of an inexorable progress toward websites that demand ever more processor-intensive tasks. If your slow performance is strictly limited to web browsing, you might try disabling Flash by either uninstalling it, or use utilities such as ClickToFlash that allow you to control what Flash content gets loaded. Flash in itself is not inherently evil, but there is nothing to stop websites or the advertisers who pay for them from writing horrible Flash code that can do everything from hogging 100% of your CPU's time to causing random crashes. You can watch Activity Monitor as in the above to correlate these troublesome web pages with performance degradation.
    You are correct; if your computer shipped with Tiger you may certainly revert to it. I forgot that Tiger was shipping on new Macs as recently as five years ago. To downgrade it would be necessary to completely erase your hard disk and boot with the Tiger installation DVD, followed by installing it anew. Such drastic measures are not necessary and you are unlikely to be satisfied with the results anyway.
    Assuming your system is free of third party parasitic junk attached to OS X in an ill-conceived attempt to improve upon it, that your hard disk drive is sound and the boot volume has enough free space to work with, by far the best performance-enhancing improvement would be to add more memory. Buy as much as your computer can use and that you can afford. 2 GB is not that much any more.
    Read the following for some recommended troubleshooting techniques from Apple:
    General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
    Creating a temporary user to isolate user-specific problems: Isolating an issue by using another user account
    Memory limitations: Using Activity Monitor to read System Memory and determine how much RAM is being used
    Identifying resource hogs and other tips: Runaway applications can shorten battery runtime
    Starting the computer in "safe mode": Mac OS X: What is Safe Boot, Safe Mode?

  • Queries related to Portal Installation

    Hi All,
    I have a few queries :
    We hv installed EP 6.0 based on standalone Java 6.40 system.Wt is the meaning of SCS Instance no.during POrtal installation ? On wt basis does Visual Administrator takes 50004 port for its connectivity when we open irj site with port 50000? Lastly after Portal Java standalone installation two Instance services are formed in SAP MMC , what does these two mean and stand for and wt do they indicate ,secondly which is the cluster and which is the server one amongst the two.Revert to these queries at earliest as i need this info urgently.
    Regards,
    Saumya

    SCS stands for central services of SAP NetWeaver AS Java instance, with enqueue and message service.The Central Services run on one physical machine and constitute a Java instance.
    You could get a better response on an appropriate forum,I think.
    You have got quite a lot of threads open .Pls close them if u r fine with replies u have recieved .It would also be nice if you could  go through this
    Must read</b>
    Rgrds
    Vineeth

  • Enterprise Portal Installation

    Dear Expert,
              I am New Implementation Consultant, i dont know how to follow the correct procedure. Please provide for us INSTALLATION GUIDE AND IMPLEMENTATION NOTES, AFTER INSTALLATION CONFIGURATION STEPS, DOCUMENT LINKS.
    Thanks,
    Selvarajs

    Hi Selvaraj,
    Please check the below help file and link on Enterprise Portal installation.
    http://help.sap.com/saphelp_nw04/helpdata/en/22/e082410d4cbe0fe10000000a1550b0/content.htm
    http://wiki.sdn.sap.com/wiki/display/EP/PortalInstallation,ConfigurationandCustomizationTips
    Hope it helps.
    Regards,
    Raghu

  • Questions regarding *dump_dest parameters and fast_recovery_area

    Hello,
    I just installed a fresh new 11.2.0.2 Database on Solaris 10.
    Everything straightforward on the parameter side!!! I tried custom install as well as general purpose template. When installing with DBCA, I set every parameters around DB Name in lowercase name.
    With this, questions are popping in my mind regarding some parameters after installation.
    First, %dump_dest parameters contains in path, two times the db name (ocpdb in my case):
    background_dump_dest       /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/trace
    user_dump_dest                 /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/trace
    core_dump_dest                 /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/cdumpIs it normal to have ..../rdbms/dbname/dbname/..... as path, with dbname/dbname ??? Why?
    Second, the question regarding the directory structure under fast_recovery_area (new term for flash_recovery_area). The directory structure:
    oracle@enalab13:/u01/app/oracle/fast_recovery_area$ ls -l
    total 2
    drwxr-x--- 2 oracle oinstall 512 2010-10-28 19:53 ocpdb
    drwxr----- 5 oracle oinstall 512 2010-10-29 07:44 OCPDB
    oracle@enalab13:/u01/app/oracle/fast_recovery_area$ ls -l ocpdb
    total 9528
    -rw-r----- 1 oracle oinstall 9748480 2010-10-31 21:09 control02.ctl
    oracle@enalab13:/u01/app/oracle/fast_recovery_area$ ls -l OCPDB/
    total 3
    drwxr----- 5 oracle oinstall 512 2010-10-31 03:48 archivelog
    drwxr----- 3 oracle oinstall 512 2010-10-29 07:44 autobackup
    drwxr----- 3 oracle oinstall 512 2010-10-29 07:43 backupsetWhy am I having a subdir with dbname in uppercase AND in lowercase? Should I specify dbname in uppercase at db creation to have all files under the same directory, or in lowercase? Or, is it normal?
    I want to know how to do it well before reinstalling a fresh database.
    Thanks
    Bruno
    Edited by: blavoie on Oct 31, 2010 6:18 PM
    Edited by: blavoie on Oct 31, 2010 6:20 PM

    Hi,
    I just reinstalled all from scratch, everything in lowercase as well in environment variables and dbname in dbca:
    oracle@enalab13:~$ echo $ORACLE_SID
    ocpdbFast recovery area directories, dates prove that it's my fresh install:
    oracle@enalab13:/u01/app/oracle$ ll fast_recovery_area/
    total 2
    drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:06 ocpdb
    drwxr-x--- 4 oracle oinstall 512 2010-11-02 11:24 OCPDB
    oracle@enalab13:/u01/app/oracle$ ll -R fast_recovery_area/
    fast_recovery_area/:
    total 2
    drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:06 ocpdb
    drwxr-x--- 4 oracle oinstall 512 2010-11-02 11:24 OCPDB
    fast_recovery_area/ocpdb:
    total 9528
    -rw-r----- 1 oracle oinstall 9748480 2010-11-02 11:34 control02.ctl
    fast_recovery_area/OCPDB:
    total 2
    drwxr-x--- 3 oracle oinstall 512 2010-11-02 11:24 archivelog
    drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:06 onlinelog
    fast_recovery_area/OCPDB/archivelog:
    total 1
    drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:24 2010_11_02
    fast_recovery_area/OCPDB/archivelog/2010_11_02:
    total 47032
    -rw-r----- 1 oracle oinstall 48123392 2010-11-02 11:24 o1_mf_1_5_6f0c9pnh_.arc
    fast_recovery_area/OCPDB/onlinelog:
    total 0Some interresting output asked earlier in post:
    SQL> archive log list
    Database log mode              Archive Mode
    Automatic archival             Enabled
    Archive destination            USE_DB_RECOVERY_FILE_DEST
    Oldest online log sequence     4
    Next log sequence to archive   6
    Current log sequence           6
    SQL> show parameter recovery
    NAME                                 TYPE        VALUE
    db_recovery_file_dest                string      /u01/app/oracle/fast_recovery_area
    db_recovery_file_dest_size           big integer 4032M
    recovery_parallelism                 integer     0
    SQL> show parameter control_files
    NAME                                 TYPE        VALUE
    control_files                        string      /u01/app/oracle/oradata/ocpdb/control01.ctl,
                                                         /u01/app/oracle/fast_recovery_area/ocpdb/control02.ctl
    SQL> show parameter instance_name
    NAME                                 TYPE        VALUE
    instance_name                        string      ocpdb
    SQL> show parameter db_name
    NAME                                 TYPE        VALUE
    db_name                              string      ocpdb
    SQL> show parameter log_archive_dest_1
    NAME                                 TYPE        VALUE
    log_archive_dest_1                   string
    log_archive_dest_10                  string
    log_archive_dest_11                  string
    log_archive_dest_12                  string
    log_archive_dest_13                  string
    log_archive_dest_14                  string
    log_archive_dest_15                  string
    log_archive_dest_16                  string
    log_archive_dest_17                  string
    log_archive_dest_18                  string
    log_archive_dest_19                  string
    SQL> show parameter %dump_dest 
    NAME                                 TYPE        VALUE
    background_dump_dest                 string      /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/trace
    core_dump_dest                       string      /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/cdump
    user_dump_dest                       string      /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/traceI think, next time, I'll install everything regarding oracle SID in upper case...
    Maybe it's details that I don't need to care about... I seems that something is happening bad with the management of fast_recovery_area...
    Thanks
    Bruno

  • Regarding XI installation and Learning

    Hi All,
    I am very new to XI and i want to get into XI domain.
    At present i am actually into SAP-ABAP from 2 years.
    As i want to learn XI so i want some suggestions from all you guys familiar with XI.
    I have some questions regarding XI.
    1. What is the system configuration required for installing XI!
    2. Can we get the XI software [Trail versions-Down load] from any web sites!
    3. What are the prerequisities for learning XI.
       Like what are the languages we should be familiar
       before for learning XI!
    4. Actually what is XI is all about!
    5. Can anybody send me good material for XI for me to
       proceed further.
       If anybody having very good material in XI please
       forward the same to :
       My Personnal Mail ID : <b>[email protected]</b>.
    I will be very much helpful if any body help me in this regard.
    Any help for the same will be appreciated very much.
    Looking forward to all you people's help.
    Thanks in advance.
    Thanks & Regards,
    Rayeez.

    Hi Shaik,
    Follow these steps while installing XI:
    1. Windows server or advanced server with latest service patch.
    2. IE 6.0 with latest service patch
    3. Install Microsoft office and winzip, acrobat
    4. Install JDK with version 1.4.2_03 or above with the corresponding JVM
    5. Install the SAP GUI 6.20
    6. Make sure that you have hard disk space of 10 GB in C drive and 50 GB in the installation drive.
    7. Make sure the virtual memory is between 512 and 1594 or above for the installation drive.
    8. Copy the dumps of following DVDs into the installation drive.
    • Installation Master DVD
    • Installation Export
    • Additonal Components for SAP BW/SAP XI,SAP MI,SAP KW
    • SAP Web As Java
    9. Start the installation from the DVD dump Installation Master DVD.
    10. When installing the ABAP Database the SID of the oracle default database should be different the ABAP database SID.
    U can go through the Installtion Guides for Installing XI from http://service.sap.com/instguides (SR1 installation)
    u can also refer to service.sap.com/platforms to see the available platform on which XI can be installed. ( Windows/linux/UNIX)
    or you can even go through this weblog which clearly talks to you about XI installation
    <a href="/people/sap.user72/blog/2005/05/31/my-experience-with-xi-installation-on-fedora-core-3-linux installation</a>
    In addition to this installation guide you also need to download the XI configuration guide which is very useful for technical configurations of various adapters and XI system.
    At the same place you will also get the XI configuration guide e.g XI30ConfigGuideSPS11.pdf.
    U can also download SAP Exchange Infrastructure 3.0 SR1 Installtion Guide from the articles scetion.
    ABOUT XI :
    If it’s just that you wanted to know more about sap xi....then the information below should definitely help you.
    The best way to learn XI would be to make the maximum use of XI from its forums, weblogs, presentations, etc in SDN.
    First I thought I will just give u the basic steps involved in doing any scenario in XI. This is very essential for a beginner.
    First of all you would need to define your product, software component, business system and configure the technical landscape in the sld.
    You then go on to create the objects in the repository, you import your software component here and then begin your design steps. To import your RFCs n Idocs if you require any before proceeding.
    Then under the name space which you want, you go on to define your data types, message types and message interfaces.
    Then you do your message mappings where you specify your source and target message types and the relation between them, then you do your interface mapping. If you are using a BPM, you do the integration process.
    Once you have this done, you will have to move to the directory, here is where you define how you use the objects and how you configure them to work as a scenario.
    You assign your business system to the configuration scenario which you have created, and create the communication channels. Then you go on to configure the receiver determination, interface determination, and the sender and receiver agreements. Once you’re done you will have make sure you activate your objects. The exact parameters steps depend on what kind of scenario you are implementing.
    You can use sxmb moni or the runtime workbench to monitor the entire scenario which you have done.
    Also I would suggest this link on SAP help for any info that you want on XI,
    http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
    Further, this thread deals with everything that is needed for a starter on XI. Do check them out,
    JDBC Receiver: exact SQL statement
    /message/527697#527697 [original link is broken]
    And after you are done with the documentation probably you can go through this scenario,
    JDBC Receiver: exact SQL statement
    Also check the following threads which might help you a little more,
    Learning XI
    XI 3.0 Training
    In simple words regarding learning XI, there is an abundance of information on SDN and help.sap.com…. So I think it will be better for you to search information there rather than me just providing you links….which will just go on and on and on….so I felt it is better for you to go and search so that not only you get information on SAP XI but also explore SDN in its real sense.
    Regards,
    Abhy

  • Portal Installation Errors

    during the portal installation through RapidInstaller i am getting following errors at the ABAP UME screen and i am not able to sort out what the error message is all about
    <b>Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=sap-epp SYSNR=00 GWHOST=sap-epp GWSERV=sapgw00 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '172.17.16.191:sapgw00' not reached TIME Tue Dec 19 15:01:03 2006 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -10 MODULE nixxi.cpp LINE 2764 DETAIL NiPConnect2 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 1</b>
    please provide me some help and i thank you all in advance for the same

    Hi Aijaz,
    You can get the same at this location. Browse by Netweaver 04 or Netweaver 04s as per your requirement. you need a service market place user id for this purpose.
    https://websmp208.sap-ag.de/instguides
    Hope this helps.
    Regards,
    Venkat.
    [Reward points if useful]

  • FIM Service and Portal Installation Ends Prematurely

    Hello All,
        I'm in the process of setting up a new production FIM 2010 R2 server. I have already installed the FIM synchronization service and I was able to install this successfully.
    I have already installed SharePoint services (WSS 3.0) and configured it for FIM. But when I try to install the FIM Service and Portal.
    I keep getting and error that says " FIM Service and Portal Installation Ends Prematurely" with no other details. If anybody has any advice please let me know. 
        I have already installed everything on a stand alone box in a dev environment and it all works correctly however I am unable to now install in a production environment 

    Cameron is right - you should consider FIMService account nearly as normal AD account for user*
    An installer account should be admin on the box, where you are installing FIMService and he should be sysadmin on SQL during installation of FIMService. An installer account should be other than FIMService account itself.
    *FIMService account:
    Lock down the Service Account
    The service account should not be used by any other services or users. The account must not be used to logon interactively and requires no access to any additional resources beyond those granted during setup. The service account is used to provide the security
    context for the MIIS service as it accesses resources on the MIIS server and the associated database. It also provides the security context for the execution of any rules extensions.
    Lock down the service account to ensure no malicious user is able to sign in using its credentials and gain access to MIIS data. Configure Group Policies to lock down the account and restrict access to this account. Since the MIIS service only needs the account
    to run as a service, restrict the account as follows:
    Deny logon as a batch job.
    Deny logon locally.
    Deny logon through Terminal Services.
    Deny access to this computer from the network.
    If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.
    Good topic for a Wiki article:
    http://social.technet.microsoft.com/wiki/contents/articles/23330.technet-guru-contributions-for-march.aspx
    Thanks Dominic and Jose!
    Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

Maybe you are looking for