Queue Error Text

Hi All,
Need an urgent help from you, while monitoring APO Systems, I have got an error text for a queue, "A table entry already exists with this secondary key". can u please tell me how to handle this?
If i run a delta report, would it help?
Someone please help urgently...

BenSpencer wrote:
1) size of temp: 1G total with a little over 800M free (this is a Linux system which I think defaults to a 4K block size)800MB / 4 => 200MB. Are you able to send an email with a 100MB attachment?
2) I will look into that bug. thanks for the pointerThis bug was never escalated -- so to get it fixed in the short-term a support case would need to be raised.
3) BLOCK_SIZE has been set at different values. Initially, it was set at 200M (204800) That value translates to 2MB (not 200MB).
which of course should have thrown an error in this case (but a different error). Currently, it is set to a little under 500M (500000), though I also tried it wiothout setting the BLOCK_SIZE.In general there should be no need to change the BLOCK_SIZE parameter from the default of 1024 (1KB). The BLOCK_SIZE parameter is a multiplier used to calculate other email restrictions and in the mail.log output:
http://msg.wikidoc.info/index.php/Block_limit%2C_block_size%2C_header_limit%2C_line_limit%2C_max_header_block_use%2C_max_header_blocks%2C_max_header_line_use%2C_max_header_lines%2C_max_mime_levels%2C_max_mime_parts%2C_normal_block_limit%2C_non_urgent_block_limit%2C_urgent_block_limit_MTA_Options
By default the MTA has no limit on the maximum size of an email outside the available storage (which is what you are hitting now).
Regards,
Shane.

Similar Messages

Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED

Hi experts,
I have a big issue in production server,
the Queues are stuking in smq2 " command to tRFC/qRFC: execute LUW again"
if i am reprocess or press F6 it is going manually.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html><head><title>Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://xidist:8000/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP NetWeaver Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://xidist:8000/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://xidist:8000/sap/public/icman/img/graybar_tile.jpg" height="31"> </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2><b>404 Resource not found</b></H2><br>Partner not reached<br><br><hr> <table border="0"> <tr><td>Error:</td><td>-20</td></tr> <tr><td>Version:</td><td>7000</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Wed May 14 15:50:24 2014 </td></tr> <tr><td>Module:</td><td>icxxconn.c</td></tr> <tr><td>Line:</td><td>2341</td></tr> <tr><td>Server:</td><td>xidist_GXI_00</td></tr> <tr><td>Error Tag:</td><td>{004654a1}</td></tr> <tr><td>Detail:</td><td>Connection request from (110/28816/0) to host: xidist, service: 50000 failed (NIESERV_USED) EX-T110, U28816, 001 PIAFUSER, 10.1.57.50, 15:50:24, M0, W1, , 1/0</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2009, SAP AG</a></FONT> </td></tr></table> </body></html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Regards,
Kiran polani

Dear Sriram Ramani,
in ths case some scenarios are working good. proxy to soap, idoc to soap and jdbc to proxy, proxy to jdbc all are working with out error.
but my problem is in Soap to RFC case..
for all RFC communication channels are working but some time it is throwing RFC_COMMUNICATION_ERROR and messages are stucks in smq2 with retry.
when i check with retry error with in sxmb_moni log showing ICM_HTTP_CONNECTION_FAILED with error code 400.
not for all signals for few signals for some time..
Why it is happening i can't understand.
in repository it is saying Repsitory object hmi failed and address already in use.
is there any problem with loading IR objects.
Please suggest me good suggestion for this type of issue what can do for this to resolve.
Regards,
Kiran Polani

CLIENT_SEND_FAILED error code: 500, error text: Internal Server Error

Hi,
Developed Proxy <-->PI<-->JDBC SELECT scenario and getting the following error.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_SEND_FAILED</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while sending by HTTP (error code: 500, error text: Internal Server Error) (See attachment HTMLError for details)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
When I cross checked the JDBC Receiver communication channel in Runtime Work Bench
request and response were successfull. RWB shows the following message.
2009-06-12 09:34:50 Information The message was successfully received by the messaging system.
2009-06-12 09:34:50 Information Message successfully put into the queue.
2009-06-12 09:34:50 Information The message was successfully retrieved from the request queue.
2009-06-12 09:34:50 Information The message status was set to DLNG.
2009-06-12 09:34:50 Information Delivering to channel: DB2ReceiverTableSPT
2009-06-12 09:34:50 Information JDBC Adapter Receiver processing started, required QoS BestEffort
2009-06-12 09:34:50 Information JDBC Adapter Receiver Channel DB2ReceiverTableSPT:
2009-06-12 09:36:35 Information Database request processed successfully.
2009-06-12 09:36:35 Information The message was successfully delivered to the application using connection JDBC_http://sap.com/xi/XI/System.
2009-06-12 09:36:35 Information The message status was set to DLVD.
I had gone thru all the previous threads related to 'CLIENT_SEND_FAILED' but
those did not solve my problem.
Can some one help me to solve this issue.
Thanks,
Vijay.

I made necessary changes as per the blog. Appended '_response' for JDBC response structure.
Still I am facing same problem.
Strange....delibarately gave the link so that you can cross-check the JDBC config on receiver side...I assume that the proxy is configured properly with the Sync communication....also mapping is done accordingly...
Regards,
Abhishek.

RSTPTEST , RFC ping failed RFC error text: timeout during allocate / CPIC-C

Hi all,
I was transporting the request in my landscape last week and all of sudden transports in acceptance system is not working and I am getting a error message as
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
SMGW logs are as follows:
Tue Jun 16 12:04:28 2009
ERROR => GwISearchPartner: timeout, partner LU: >hostname<, TP: >M:\usr\sap\SID\DVEBMGS00\exe\tp.EXE< [gwr3cpic.c 6135]
ERROR => GwISearchPartner: HOST: hostname conv ID: 50323660 [gwr3cpic.c 6148]
, This is the 3 system landscape, common transport directory in development system.
Actions taken:
Restarted the systems (PRD queue is working but not acceptance queue)
DIR_TRANS and Permission were given already and able to ping from all the sytem
Host and service entry were maintained already.
RFC connections were woring fine without errors
I have seen many threads but none of the thread is solved my problem.
Please suggest
Vijay

Hello,
Thanks fpr your reply and I tried the steps which you said and the result is same error for both the options.
1 & 2 Answers :
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
SMGW logs are as follows:
Tue Jun 16 12:04:28 2009
ERROR => GwISearchPartner: timeout, partner LU: >hostname<, TP: >M:\usr\sap\SID\DVEBMGS00\exe\tp.EXE< http://gwr3cpic.c 6135
ERROR => GwISearchPartner: HOST: hostname conv ID: 50323660 http://gwr3cpic.c 6148
I think this is not able to contact the domain controller.
But I can see the checks are fine from checking the transport directory.
Vijay

RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'

I am having this error pop up very frequently on some new SAP systems. This will randomly happen and keep us from being able to release transports and import them in STMS. I receive the following error:
There was an attempt to start the transport control program tp using the local RFC interface.
An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
- When I check the Transport Tool (STMS: import queue> check> transport tool) I get the following information:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time
out during connection setup (check that partner exists
- When checking the TP System Log I receive the same error. The RSTPTEST report does not give any additional information. SM21 shows a warning and an error:
Warning:
Communication Error, CPIC return code 020, SAP Return code 456
Dialog Process No. 000
Problem cl: SAP web AS problem
Package: STSK
Further Details:
Module Name: thxxhead
Line: 7488
Error Text: 020456
Caller: ThRecei
Error:
Problem cl: transaction problem
Package: STTO
All of these errors are only pointing to a time out. I cannot figure out why this is happening. I checked the TMS RFC connection in SM59 and they are fine. I have been able to work around this issue in 2 different ways. First, I can delete the files in the "\trans\tmp" directory on the server. Sometimes this resolves the error. Else I have to restart the system.
I need to understand where this issue is coming from and how to resolve it. It is becoming more and more frequent. Thank you for your help!

Hi,
i have had similar issues during this week. After looking for a solution everywhere i found out that i didn't set up the FQDN on this system.
Symptoms were:
se38 > RSTPTEST timed out sometimes(not always)
sm59 > TCP/IP connections > CALLTP_WindowsNT > test connections timed out sometimes (again, not always)
STMS Overview > Systems: I was not always able to distribute and activate configuration from the Domain controller via Extras > Distribute and Activate Configuration (it died on the mentioned system)
Transports failed mostly with the same error.
The error log was somewhere deep in ST11. It could not resolve our FQDN.
The solution, for me, was to add our FQDN to the WINDIR\System32\drivers\etc\hosts file.
We upgraded the kernel as well (from 7.20 patch 046 to most current) but this didn't help.
The FQDN is a concatenation of computer name and dns suffix of the network (if you have none, you can add one via rightclick on the used network adapter>ipv4>properties>Advanced>DNS tab, so in the end the host file looked like
127.0.0.1 localhost computer-name.ourSuffix.com
After this line has been added, the error stopped and the transports work again.
I hope it helps. Good luck.

[MESSAGE.GENERAL] How can take the actual error text for ABAP proxy error?

Hi...
I'm a ABAPer.
I got to create outbound abap proxy for synchronous server proxy and described below.
My problem is program can not catch the actual error message when occurred error during send data to XI.
The return message is just 'MESSAGE.GENERAL'.
But according to the XI part, 'Key error' is actual reason.
So... how can i take the actual error text like 'Key error'?
<b>* Only MESSAGE.GENERAL is return message for all kind of errors.</b>
Thanks.
Below----
TRY.
      CREATE OBJECT abap_proxy.
      CALL METHOD abap_proxy->execute_synchronous
        EXPORTING
          output = gs_out
        IMPORTING
          input = gs_in.
Exception Handling
<b>    CATCH cx_ai_system_fault INTO go_sys_exception.
      g_sys_result = go_sys_exception->get_text( ).</b>
    CATCH cx_ai_application_fault INTO go_app_exception.
      g_app_result = go_app_exception->get_text( ).
ENDTRY.
COMMIT WORK.
Return status 'D' is succeeded.
if gs_in-sales_group_rer_sap-xstat <> 'D'.
     WRITE:/ 'System Error Message      :', g_sys_result.
     WRITE:/ 'Application Error Message :', g_app_result.
endif.
*--Result--
System Error Message      : MESSAGE.GENERAL
Application Error Message :
Message was edited by: Miju cho
Message was edited by: Miju cho

Thanks guys, this was useful.
My scenario is for Asynchronous communication.
I guess Fault messages are used in case of Synchronous communication for handling application errors. So if there was something wrong at the JDBC end then I could use the fault messages.
Have i got this right?
I also came across this piece on Acknowledgements. But is says that they can be used with the following Receivers:
The following receivers support acknowledgments:
ABAP and Java proxies (XI 3.0 SP1 for the latter)
Integration processes
IDocs (note that IDocs only return acknowledgments when they have been configured using the ALE audit)
Receiver adapters support system acknowledgments but not application acknowledgments
My Receiver is JDBC. So I guess I cannot use acknowledgements either.
Hence, I need to know what I can do to replicate the system errors eg. failed server etc...so that I can get catch these errors during sending.
I'll tell you abt what happened earlier.
My XI server was down. I executed the code for the sender ABAP Proxy and it did not catch the error. In SXMB_MONI in the R/3 system, I could see the messages queued up. When the XI server started, the messages were transferred to XI.
I need to handle such errors...ie. If the server is down or message did not reach XI then my ABAP program that sends data via ABAP proxy needs to know that something went wrong.
Thanks and Regards,
Ashwin

The following error text was processed in the system IDS : Access via 'NULL' object reference not possible.

Hi all ,
Im getting the below error , actually recently i created my own custom table zstudent, later i wrote select query to fetch data from the same and dump at internal table and then bind this to the table node.
But im getting below error, even i removed the select query still same error is occuring.
Error when processing your request
What has happened?
The URL http://********00.*****b.com:8000/sap/bc/webdynpro/sap/zdemo_student/ was not called due to an error.
Note
The following error text was processed in the system IDS : Access via 'NULL' object reference not possible.
The error occurred on the application server axsids00_IDS_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: WDDOINIT of program /1BCWDY/YUSM2Q74A826Y0JY1I4V==CP
Method: IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT of program /1BCWDY/YUSM2Q74A826Y0JY1I4V==CP
Method: DO_INIT of program CL_WDR_DELEGATING_COMPONENT===CP
Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
Method: INIT_CONTROLLER of program CL_WDR_COMPONENT==============CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: INIT of program CL_WDR_CLIENT_COMPONENT=======CP
Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
Method: IF_WDR_RUNTIME~CREATE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP

Thanks Rama,
Acutally i accidentally commented the lo_nd_student = wd_context ....etc
this line was commented .
i have one small requirement to fetch data from local customised table and fill the same to internal table and bind that to table node.
my table node is student having attributes as name , city and number , all are of type strings.
now i created one custom table zstudent having ID - char of length 10,
name of type string
city of type string
num of type string
i have inserted records
but when i use select query to fill data from this zstudent to my internal table of type lt_student type wd_this->elements_student ,
im getting same above error.

Function returning error text validation

Hi,
I have a page where i can insert/update user, organisation, responsible.
Organisation can be nullable.
Only one user at a time can be responsible for a organisation.
To check this responsible validation i made a function returning error text validation as follow:
BEGIN
FOR c IN (SELECT usr_spa
FROM kpi_users
WHERE usr_org_id = :p22_usr_org_id
LOOP
IF upper(:p22_usr_spa) = upper('YES') and upper(c.usr_spa) = upper('YES')
THEN
RETURN 'A user is already responsible for this organisation'||'!';
END IF;
END LOOP;
END;
The validation works fine.
But it goes wrong when i want to insert a new user, without assigning him to an organisation.
I get following message:
ORA-01722: invalid number
ERR-1024 Unable to run "function body returning text" validation.
Can someone please help me solve this problem?
Thanks

Hi,
try:
BEGIN
FOR c IN (SELECT usr_spa
FROM kpi_users
WHERE usr_org_id = nvl(:p22_usr_org_id,-1)
LOOP
IF upper(:p22_usr_spa) = upper('YES') and upper(c.usr_spa) = upper('YES')
THEN
RETURN 'A user is already responsible for this organisation'||'!';
END IF;
END LOOP;
END;This assumes that :p22_usr_org_id could be null and converts this to -1 (pick another default value if this may exist as an id). It is possible that the statement would otherwise be seen as WHERE usr_org_id = null which is invalid.
or you could do:
BEGIN
IF :p22_usr_org_id IS NOT NULL THEN
FOR c IN (SELECT usr_spa
FROM kpi_users
WHERE usr_org_id = :p22_usr_org_id
LOOP
IF upper(:p22_usr_spa) = upper('YES') and upper(c.usr_spa) = upper('YES')
THEN
RETURN 'A user is already responsible for this organisation'||'!';
END IF;
END LOOP;
END IF;
END;As this would stop the validation running if the :p22_usr_org_id is null.
Or, you could just make your validation conditional on p22_usr_org_id not being null?
Andy

Reg:Getting error text from a channel into a file or into a variable

Hi,
Can we get the error text such as u201Cjava.lang.NegativeArraySizeExceptionu201D from a communication channel into a variable or in the form of an xml message so that based on kind of error further processing can be done.
Regards,
Rahul

You can decide further processing based on the data available in the mapping. If the value comes in the source field for a list element as you expected do UDF and return error as string and decide the mapping as per business need. I talk about something like enhanced interface determination. That's one way. Reading the error message from the communication channel and decide does not seem to be better option.

Database error text: invalid number

Hi Gurus,
I am calling a procedure proxy from ECC and it is giving me a short dump:
Error 339 has occurred while executing database procedure
""_SYS_BIC"."Krishna_Demo_Proj.Model/KC_GET_MARA"" on the
current database connection "R/3".
Database error text: invalid number: ''
Triggering statement: "dsql_open_proc"
I have created a table with only one field.
Mapped the Data types after creating the Procedure Proxy
Which data type I need to use? I tried with lots of combinations but, still the same error.
Regards,
Krishna Chauhan

Hi Srinu,
I have used NVARCHAR 18 and corresponding to that CHAR18 is used.
Please see the attached screen shots.
Regards,
Krishna Chauhan

The database error text is: ORA-01843: not a valid month

I am trying to use a date field as a query filter and I keep getting the
following error:
A database error occurred. The database error text is: ORA-01843: not a
valid month. (WIS 10901).
When I remove the query filter and run the query it works as
expected. I want to be able to allow the users to use the date field in order
to select a date range. Can someone provide me with some information on how to
resolve this issue.

SQL> SELECT (to_char(tO_date('09/29/2006', 'mm/dd/yyyy'))||':'||TO_CHAR(systimestamp,'hh24:mi:ss:ff6'))
2 FROM dual;
(TO_CHAR(TO_DATE('09/29/2006
29-SEP-06:01:33:09:023000
But you want mm/dd/yyyy hh24:mi:ss:ff6 format then use TO_CHAR function for format specifier
SQL> SELECT to_char(to_timestamp((to_char(tO_date('09/29/2006', 'mm/dd/yyyy'))||':'||TO_CHAR(systimestamp,'hh24:mi:ss:ff6')), 'dd/mm/yyyy hh24:mi:ss:ff6'),'mm/dd/yyyy hh24:mi:ss:ff6')
2 FROM DUAL
3 /
TO_CHAR(TO_TIMESTAMP((TO_CHAR
09/29/0006 01:40:27:113000
SQL> Khurram

A database error occured. The database error text is: ORA-29275: partial multibyte character . (WIS 10901)

Hi,
My Webi report is geeting failed with the error
"A database error occured. The database error text is: ORA-29275: partial multibyte character . (WIS 10901)"
may i know the root cause of the above error and how to resolve it. I am using BO 3.1.
Its very important to provide the report. Please help urgently.
Thanks in advance.
Abid

Hi Abid,
Please see SAP Note 1556127.
Symptom
A database error occurs after refreshing a web intelligence report in java report panel or web intelligence in interactive mode
The database error text is: ORA 29275 with partial multibyte character (WIS 10901)
Environment
windows 2003 Server
Cause
Environment variables are not set with value UTF-8:LC_ALL,LANG, and NLS_LANG
Resolution
Set following system environment variables: LC_ALL,LANG, and NLS_LANG with value UTF-8. For example, LC_ALL=EN_US.UTF-8

ST22 Short Dump DATASET_WRITE_ERROR Error text: "Input/output error" Error

Dear All,
Please kindly help. I have the following error. Is it possibility due to disk full?
DATASET_WRITE_ERROR
An error occurred when writing to the file
"/capps/AP0/edi/CCM/565500_001105200_00126_20080715_042803.tmp".
Error text: "Input/output error"
Error code: 5
Many thanks in advance,
Yan

Hi,
Check the return code of the OPEN DATASET. May be autorizations for writing might not be there.
If the file is written partially it would be due to memory problem.
Also check the OPEN DATASET Parameters if they are correct.
Hope this helps.

Inbound queue error

Hi Gurus,
I am facing a problem with inbound RFC Queue,error message is logical system not defined in table smof_erpsh.
i hav e cheked the table but not too sure about how to activate the queue.
please help.
Regards,
Samarjit

Sounds like you switched backends on the CRM system. You can only have one ERP backend connected to a CRM system, in a normal typical landscape without special customizing.
You may also had a system that was copied from the original backend that is now trying to send bdocs to your crm system. Can you tell us a little more about your system landscape and we can then see what needs to be done?

Error text missing in raising exception (In ABAP mapping)

Hi,
iam using ABAP Mapping for 1 interface.
Based on some condition i am raising exception with error text. When i executed this in SXI_Mapping_test it's showing the Error text. But when i execute the interface directly error text is missing in the Error details.
can any one figure out y its not coming..
regards
Kishore

Hi,
I think you need to write the error to mapping trace.
http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm
Regards
Vijaya

Queue Error Text

Similar Messages

Maybe you are looking for