Quickstart install of Remedy app from ADC - problems

I am having trouble with installing the Remedy application from the ADC.
First off I used the "Quick Start Installation Guide for the Enterprise Web Suite 5.0.2 for Tomcat on Windows" to install the Portal Server, Collaboration Server, etc to one machine that was very clean. In fact is it actually a VMWare virtual machine. All of that went fine and the tests in the Quick Start install guide all worked.
I then used the "Quick Start Single Machine Installation Guide for the Remedy Therapeutics Application" to install Remedy to this machine. The first step is to run installadc.bat. I had to modify it slightly because the service names listed were incorrect. When I ran it everything was fine until the call to deployToPortal.bat which is near the end. That failed. I made a bat file out of just that portion and tried to run it again and it failed with the same error. Of course no AndromedaNav class or jar file is anywhere to be found.
I went on and the rest (steps 2,3) of the Remedy install except that I didn't import any projects into Eclipse nor did I open any projects in Visual Studio. Then I rebooted. PTSpy is set to start up and came up with some warnings and errors. It has a fatal error because it can't find the AndromedaNav class or jar file (it doesn't exist because deployToPortal.bat failed) but it also seems like perhaps my CLASSPATH variable is not set right. I cannot get the portal login to even come up now.
Anyone who has been down this path and may be able to help me? I have copies of the installadc.bat and the run_deployToPortal.bat that I created to retry deployToPortal.bat, as well as the output that went to the DOS window when run_deployToPortal.bat is run. I also have a copy of the PTSpy log file.
I am new to Plumtree and Plumtree application development. Please send me an email at [email protected] and I will send these files.
Thanks!
Nick

Mark,
Here is the section of the deployToPortal log where the error occurs. I can email you the entire thing if it will help. Thanks! Nick
compileCSharp: [echo] EWSUtil [echo] C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/authsourcesso.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/jsregistry.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/pthome.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/openfoundation.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/xpdebug.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/httpmemorymanagement.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/uiinfrastructure.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/plumtreeserver.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/marshalers.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/treeiterator.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/portalpagesperf.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/portaluiinfrastructure.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/utility.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/xui.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/portalpages.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/edk.dll,System.dll,System.Web.dll,
BUILD FAILEDC:\Program Files\plumtree\EWS_Toolkit\build.xml:598: Following error occured while executing this lineC:\Program Files\plumtree\EWS_Toolkit\build.xml:689: Following error occured while executing this lineC:\Program Files\plumtree\EWS_Toolkit\build.xml:261: Following error occured while executing this lineC:\Program Files\plumtree\EWS_Toolkit\build.xml:628: Following error occured while executing this lineC:\Program Files\plumtree\EWS_Toolkit\build.xml:636: Following error occured while executing this lineC:\Program Files\plumtree\EWS_Toolkit\build.xml:206: Following error occured while executing this lineC:\Program Files\plumtree\EWS_Toolkit\build.xml:383: Following error occured while executing this lineC:\Program Files\plumtree\EWS_Toolkit\build.xml:396: Execute failed: java.io.IOException: CreateProcess: csc.exe /define:RELEASE /target:library "/r:C:\ProgramFiles\plumtree\ptportal\5.0/bin/assemblies/authsourcesso.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/jsregistry.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/pthome.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/openfoundation.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/xpdebug.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/httpmemorymanagement.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/uiinfrastructure.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/plumtreeserver.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/marshalers.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/treeiterator.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/portalpagesperf.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/portaluiinfrastructure.dll,C:\Program Files\plumtree\ptportal\5.0/bin/assemblies/utility.dll,C:\Program Files\plumtree\ptport?
Total time: 22 secondsPress any key to continue . . .------- Marc Harrison wrote on 7/15/04 6:35 AM -------
What is the error when you run deployToPortal.bat? AndromedaNav.jar is built and deployed to the portal by this step (the jar file is put into the portal war file so there is no classpath to update).
To get your portal running edit CustomActivitySpaces.xml (ptportal\5.0\settings\config) and remove the line . The portal will fail to load if items in here are not present. Add this back once the AndromedaNav.jar is built and deployed.
Cheers,Marc

Similar Messages

My iPhone apps wouldn't open they just blink for a second and the home screen comes back again...i tried installing a free app from the AppStore but it didn't work and also tried resetting the iPhone but ddnt work as well please help what do i do??

My iPhone apps wouldn't open they just blink for a second and the home screen comes back again...i tried installing a free app from the AppStore but it didn't work and also tried resetting the iPhone but ddnt work as well please help what do i do??

Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
When I went back to my phone and tried installing them again (still on my computer), it worked!
I hope this helps, because it was incredibly frustrating. Good luck!

I can't install my purchased apps from App Store

I can't install my purchased apps from App Store on iPad. I push the Install button, but nothings happen.. Any advice?

1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo.
3. Try App Store again

Install region specific app from another region

Hey guys
The issue goes like this
I have got a FITBIT shipped from US which needs fitbit app from US store
Unfortunately some feature works only if i have a fitbit app on my iphone 4s
I can't install a app from other region
and i tried creating a US apple id which i was not successful either
So my question goes like
How to install region specific apps from other regions
Is having a multiple apple id so important
Thanks in advance for your valuable answers....

Hello, I think I'd contact FitBit directly...
http://www.fitbit.com/

Hi there. Have an iphone 3G and wen to install the Facebook app from the app store. Wen I selected install app, it said that the iphone requires IOS 4.3. I then plugged the phone into itunes and it said the phone was up to date (IOS 4.2.2 I think it

Hi there.
Have an iphone 3G and wen to install the Facebook app from the app store. Wen I selected install app, it said that the iphone requires IOS 4.3.
I then plugged the phone into itunes and it said the phone was up to date (IOS 4.2.2 I think it said?). How can i install these apps, the same happened and other apps i tried to install. Any advice would be much apprecaited

Unfortunately there is nothing that you can do and you CAN'T install these apps becuse your phone is too old. A 3G cannot be updated beyond iOS 4.2, which is the most it can support and these apps need iOS 4.3 or above to be installed and there are no versions of these apps available.
Developers have to place a cut off somewhere and keep developing for the most recent software that does not now include the 3G.
If you want to install these apps on your phone, then you will have to upgrade to either an iPhone 3Gs, iPhone 4, 4s or 5. That is all you can do because you won't be able to download these apps on an iPhone 3G - just not possible any longer.

Install and run app from App Store on external hard drive?

I just made the switch from a MBP to an Air, and am figuring out how to best utilize an external hard drive (1 TB) to save space on my internal drive (128 GB).
I am not sure how the performance will be, but I would like to at least try out running Bioshock Infinite (39 GB, purchased through the App Store) from the external drive. My biggest hurdle right now is figuring out how to properly install the app on my external drive. Here's what I've tried so far:
1. When I try to install it from the App Store, there's no way to choose where it is installed, and because I don't have much space left on my internal drive, I of course get the error that there is not enough disk space available to install.
2. When I copy the app from my old MBP to my external drive, and then try to run it on my Air, I get an error that the file is corrupt, and am told to reinstall it.
What can I do to be able to play Bioshock Infinite on my Air without it taking up nearly a third of my internal drive space? Any suggestions would be greatly appreciated.

Welcome to the Apple Discussion Forums!
I will have to think about your problem for now. But an easier way to copy your CD's to your computer is:
On iTunes, open up preferences then click on the "Advanced" tab. You will then see "iTunes Music folder location. And you will see where your music is being saved on your computer. There are two boxes to the right that say "Change..." "Reset". Click on the "Change..." button and select your folder on your MyBook. iTunes will now import the music from your CD's into that folder AND this is where all of your music will need to be if you want to play it on your computer. What this is doing is pulling the music from the folder that you selected other than the folder on your computer.

How do I install a new app from my PC w/out sync'g other apps on my Touch?

Problem: How do I manually control what gets sync'd from PC to iPod Touch?
Bkgrnd: I do NOT autosync becuz I have a lot of music files on the iPod that aren't on this computer and I don't want the music overwritten by the empty PC music library.
Detail: I downloaded an app to iTunes Library on my PC and it shows up on the Apps Tab in the iPod Touch Device Folder. The "Apps" tab screen is divided into 2 areas: on the left is a gray'd out section with the words *"Sync Apps"* at the top along with and an UNCHECKED box. The new app is listed below that with another box that is UNCHECKED. The area to the right shows all the current apps are mail and note apps with data I don't want to lose.
When I click the *"Sync Apps"* I get a warning: *_"+Are u sure you want to sync apps? All existing app and their data on the iPod Touch will be replaced with apps from this iTunes Library."_*+ I'm afraid if I click "Sync Apps" that I'll lose my music. Soooo... how do I control what gets sync'd? Is there a way to back up my music on to this PC just to make sure I won't lose it?

You can, and should, back up your data to your PC.
1)Connect your ipod, select it, and right click. Select Transfer Purchases. This will transfer over any Apps or Music you purchased from the iTunes store.
2)Also, while right clicked, select Back up. You will want this back up when you sync your ipod with your new computer so you can restore from your backup. See [About Backups|http://support.apple.com/kb/HT1766] to learn what's included in a backup, but note that it does not include the items in step 2. Note: *Any music not purchased from the iTunes store will not be backed up* It is assumed that since you were able to sync and put this on your ipod, it resides on your computer already. Again, check the link above to see what is backed up.
3)To sync, select your device in iTunes. If you want to exclude music from you sync, on the Summary tab check Manually manage music and videos under Options. The go to the Apps tab and select the Apps you want to sync.
If you have never sync'd with this computer before it will warn you that it's going to wipe out your data. That's because an ipod can only be synced to one library. No way around that. It sounds like that's what's happening.
If you have all the iTune store purchases made on your touch transferred to your computer (step 1), your ipod backed up (step 2) and all other data such as music from CD's, photos, etc in your iTunes library you should be fine. It will want to remove your data to sync with this library but you can [restore from the backup|http://support.apple.com/kb/HT1414] (see link for more info on how) you made in step 2 and then sync your music etc after that. But if this is the last computer you've sync'd with you shouldn't have to do that.
Hope that helps.

Can't install a certain app from mac app store

I just purchased an app from the Mac AppStore ("MockSMTP").
After the purchase the following error message popped up.
Launchpad looks like this:
But I couln't download again because the app store claims that it is already installed.
Then I deleted some app store relevant files in ~/Library/Caches Preferences Cookies, and the started download in /Applications.
After a relogin of my mac user, I could download it again with the same error message.
So what is wrong here?? Did anybody had the same behavior ?
thanks in advance...

Thx for this, but it didn't help....BUT surprisingly it works since today !!!!
haha, the AppStore has healed itself, took me about 4 days....
Carolyn Samit wrote:
Try repairing permissions...
Launch Disk Utility located in HD > Applications > Utilities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk Permissions
It can take from ten to fifteen minutes to run.
You should see: Repair Permissions Complete when it's finished.
Then restart your Mac.
See if that makes a difference...

Error installing (replacing) an app from Dev to Prod

Today I made a few changes to my development app. Exported the app from Dev and importing into Production (replacing the app).
I made a few basic page changes, modified an Application Process, and modified a few Interactive Reports.
Application Express 4.1.0.00.32
When I do the install, I get this error.
GET_BLOCK Error.
ORA-20001: Execution of the statement was unsuccessful. ORA-00001: unique constraint (APEX_040100.WWV_FLOW_WORKSHEET_COND_PK) violated <pre>begin wwv_flow_api.create_worksheet_condition( p_id => 1716872713659283722+wwv_flow_api.g_id_offset, p_flow_id=> wwv_flow.g_flow_id, p_page_id=> 6, p_worksheet_id => 2605383661418666099+wwv_flow_api.g_id_offset, p_report_id => 2605385858150671728+wwv_flow_api.g_id_offset, p_condition_type =>'FILTER', p_allow_delete =&
The dev and prod workspaces are on separate machines.

When importing, did you keep the application ID? What happens if you choose a brand new ID (if that's an option, of course)?

Can't install or update apps from app store receive message "Failed to download"

I can no longer update or install any apps from the app store, constantly receive "Failed To Download Try Again From Purchases". This happens on every Mac I own. Any help?

I can no longer update or install any apps from the app store, constantly receive "Failed To Download Try Again From Purchases". This happens on every Mac I own. Any help?

Can't install iLife '08 apps from original system disks

First, I am embarrassed to admit that I only noticed this recently on my iMac which was purchased last June (08). I have fatefully installed all system and application updates since that time. Yesterday I discovered that the versions of all my iLife applications, except for iTunes, are version '07. This Mac was purchased directly from Apple and my understanding was this model came bundled with iLife 08. Indeed, the versions on the system installation disks that came with the Mac are '08! My only explanation for having the WRONG bundled software other than Apple shipping it that way, is that somehow transferring files from my old iMac to the new one resulted in this loss of version number. Again, I used Apple's software for the transfer process.
I have attempted to install the correct versions from the system CD(DVD?) using the "Install Bundled Applications Only" installer. It will only allow me to install a 4KB file labeled something like "CPU updater." I do not wish to waste hours backing up the whole iMac, reinstalling the System from scratch, reinstalling backed-up files, reregistering and configuring other installed software and hoping that I didn't miss anything.
*Is there there an easier way to just install the proper iLife version?* Am I missing something obvious here? Please help!
TIA,
Russ

Well isn't that confusing? Sounds more like something Micro$oft would do.
I'm still not sure why all the apps were grayed out in the custom install. Is that because they are already on disk? What if one was corrupt and I wanted to replace it?
So what versions am I likely to find in iLife 09 should I decide to upgrade?
Thank you for clearing this up and for reading my post carefully rather than giving a stock answer like "Use your system restore disks, dummy!" I so hate it when others offer pseudo "help" without taking time find out what you have already tried or know.
Many thanks for a truly helpful response,
Russ
Message was edited by: RCGlass

How do I install a single app from the Install Discs?

I've got my set of Install Discs and would like to either make a back up of a single application from it or at least see the contents as individual items within the disc. I know there's an utility out there that allows this, but I didn't capture where I read about it.
Trying to ensure I don't lose my iMovie 6 HD!
Appreciate any help.
Thanks!

Here's what I got:
-I was able to extract the application (very easy to navigate right to it)
-It created a folder called "iMovieHD.mpkg Folder"
-In the folder is the "iMovie Folder" and "iMovieThemes_Tiger Folder"
-And so on ... until you get to the actual application (.app) and Library, et al
I think my last question is, now that I have the component back up of my iMovie, how would I use this in the future. That is to say, how would I install this on my next computer?
Thanks again!
km

I can't install the facebook app from anywhereeeeee kindly hellppp

i have tried several times to download the facebook app on my BB 8520 and every time it show me message that says that my device does not support the requirment needed to install it , so how may i install it and from where ...???? it is realyy urgent
best Regards

Hi Geny,
Have you verified that your BlackBerry meets all the system requirements for Facebook for BlackBerry? You can see them listed in this article. http://bbry.lv/qSoNWO
Thanks.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Can't install iphone 5 apps from iTunes 11

as the title said
im using iphone 5 32gb with ios 6.1 and itunes11 (macbookpro 10.6.8)
i downloaded some apps with itunes and wanna install it to my iphone
i click my iphone apps tabs and start to install the apps i downloaded earlier then click apply , the status bar start to sync, but not INSTALLING the apps
i check the automatically sync new application box though
next thing, im trying to restart & unplugged the iphone but it didn't work either
anyone have this solution ?

It is looks like nobody cares about your problem. Sad to say, we pay not a small money to Apple...

Error message when trying to install free iPad apps from Canadian App Store

I have an appleid for use in the Canadian App Store. I browse to the Canadian store, select a free app to install on my iPad, and get an arror message indicating that I cant use my appleid in the US store. I cant find any place where the setting might be cached. Any suggestions?

bbao wrote:
Nokia should issue a new certificate for this popular app.
Accenture's remit for continuing support for Symbian is probably quite restricted, as such issues starting to affect S60 3rd Ed. FP1 and FP2 devices increasingly now!
Happy to have helped forum in a small way with a Support Ratio = 37.0

Quickstart install of Remedy app from ADC - problems

Similar Messages

Maybe you are looking for