Quiz and question settings

I am using Captivate 4. I want my courses to do the following:
When the student comes to a question:
·         Before answering the question:
o   I would like them to be able to use the Back button on the navigation bar to go back and find the answer, but I also want the Incorrect Message to tell them what the correct answer is. So, if I check Allow backward movement in the Quiz – Settings Preferences, they can answer the question incorrectly, see the correct answer, go back, then answer the question correctly. I can’t find a way to let them go back AND not be able to answer the question more than once in a session.
·         After answering the question:
o   I don’t want them to be able to try answering again unless they get to the end of the course and click the Retake Quiz button or if they close the course and then re-launch it to try again from the beginning (I have the Quiz results and slide views option and the Slide View Completion 100% set in the Choose Report Data section of Quiz Reporting Preferences). This seems to work if I don’t Allow backward movement, but then they can’t go back from a question slide for any reason at all and that I don’t like.
When the student fails the course:
·         I want the Fail message that I typed in the Quiz Result Messages to display on the slide that displays the results of the scores. The message is very important because it tells them what their options are if they fail:
Sorry, you did not pass the course.
If you want to retake the quiz, click the Retake Quiz button. DO NOT click the Review Quiz button.
If you want to retake the course, click the X in the upper right corner of the window to close the course, then relaunch the course and take it again.
I thought this was once working (I know I saw the message at some point in my testing, but now I never see it when I fail). THIS IS MY MOST IRRITATING PROBLEM! It does not display when I preview the course or when it is uploaded to our LMS. The Pass Message displays when they pass.
·         I DON’T want them to be able to go to the last slide in the presentation by clicking the Forward button on the navigation bar or the Continue button on the scoring slide becase that slide is a Congratulations slide and marks the course as completed in the LMS. This is working.
When the student passes the course:
·         I want them to be able to go to the last slide in the presentation by clicking the Forward button on the navigation bar or the Continue button on the scoring slide becase that slide is a Congratulations slide and marks the course as completed in the LMS. This IS working!
Here are my settings:
Quiz Preferences:
Reporting:
Enable reporting for this project
Standard: SCORM
Template: Default
Report Status: Complete/Incomplete (the course will be uploaded to a SumTotal LMS, so this is a required selection)
Report to LMS as: Score
Choose Report Data: Quiz results and slide views
Slide View Completion: 100%
Reporting Level: Report score
Settings:
Name: Quiz
Required: Pass required – the user must pass this quiz to continue
Objective ID: Quiz10111
Shuffle Answers
Show progress
Show score at end of quiz
Allow user to review quiz
Quiz Result Messages:
Pass message: Congratulations! You passed the course.
Fail message: Sorry, you did not pass the course. If you want to retake the quiz, click the Retake Quiz button. DO NOT click the Review Quiz button. If you want to retake the course, click the X in the upper right corner of the window to close the course, then relaunch the course and take it again.
Email button text: Send E-mail
Score: Display score; Display maximum possible score; Display number of correct questions; Display accuracry (e.g., 70%); Display number of quiz attempts.
LMS Customization Settings:
Escape Version and Session ID
Pass or Fail:
Pass fail options: 80% or more of total points to pass
If passing grade: Action: Continue
If failing grade: Allow user: Infinite attempts
Show Retake Button
Action: Continue
Individual Question Slide Settings:
Type: Graded – there are right and wrong answers
Show clear button
If correct answer Action: Continue
Show correct message
If wrong answer Allow user: 1 attempt
Failure levels: 1
Action: Continue
Show imcomplete message

It would seem that if they can authoritatively say "It is not set up to properly report completion" that they should be able to provide you with a reason for saying that... I'd ask, though I would be surprised if they give you any detail.
Since it works for most folks, I'd suspect it's more of a Captivate thing in the way that CP reports to the LMS...
Do you know if there's any correlation between the browser folks are using and the results they're seeing?
Firefox can have issues with reporting sometimes:
http://blogs.adobe.com/captivate/2011/03/solution-to-inconsistent-lms-reporting-with-capti vate-scorm-courses-on-mozilla-based-browsers.html
CP seems to want to send tracking data to the LMS on a timed basis, at least in some cases (I've yet to explore that in detail myself). Such timing can take a while to complete, it would seem, resulting in the issues you see (in other words, the lesson could still be trying to send info to the LMS so it's not completing...or users get impatient and close the window before it's done, so data isn't sent completely).
See if the above link helps - either with the patch or switching 'g_intAPIType'...or a combo...?
Erik

Similar Messages

Combining scored interactions and questions - navigation settings

I'm trying to get to grips with the way the Preferences > Quiz > Settings > Requried options work when my quiz combines both scored interactive objects and questions.
I'm currently using Cp4 but would be interested to know if Cp5 behaves the same.
Am I right in thinking that the effects of the different options are:
Optional
The learner can scrub back and forth with the playbar as much as they like without restrictions.
Required
The learner can scrub back and forth without restriction, but only up to the last slide with a scored interaction or question. To get further into the lesson they have to click any one of the previous scored interations, or submit a single question answer (wrong or right).
Pass Requried
I couldn't figure this out at all! I set a pass score, had a load of scored interactions and questions, but the learner could scrub right through the slides with scored interactions into later slides that weren't scored. Ah well, good job I'll be using the LMS to manage pass/fail
Edit: Oh, it looks like this only comes into play if I select 'show score at end of quiz' - you can only ontinue past the results page if you achieve the pass score.
Answer all
Learner can scrub to the end of any slide with a scored interaction or question, but to get to the next slide must either click the interaction or submit an answer (right or wrong). And if the next slide also has a scored object, repeat. Once they've 'unlocked' a slide they can scrub out and back into it in the same session.
Any observations on that?
Obviously learners won't be able to scrub back if backward movement/review is disallowed.
Incidentally, I did notice that the point Cp locks the slide seems on 'answer all' to have some very odd properties. If I removed the pause from the click box, or the learner clicks play at the pause, then it carries on into a kind of phantom frame - with no captions or slide background - but the click box still works, if you know where on the screen to aim for!
Does anyone know a way to modify that locking frame to provide some info for the learner on what they need to do to progress?
Thanks

Hi BrightonJon
For the back movement there is an additional field. "Allow Back Movement" (or close to that)
Required only mentions that you cannot skip until you have answered
Pass Required means that you have to answer it correct to continue
These are about single questions.
A locking frame often happens at strange places. I have it most often using advanced actions.
Best TD

Pass/Fail issue with Quiz and Click Buttons

Got a complicated one for ya!
I have a project that has about 100 quiz questions. I want to add slides with an image for backgrownd, a voice over and a "Click Button" to be used like a Simulation. If the "Click Button" is not clicked on, I want the slide to act like a Quiz and be marked as wrong.
At the end of the Quiz I want the Pass/Fail function to be: If Pass: "Continue" then if Fail "Jump to Slide". This Failed Slide would jump to the last slide; the end of the project with a "Thank you". If Passed, the project continues to display more information on other slides.
The tests I have done the Pass/Fail seems to not be working. If failed, the project continues just like the Passed even though the "Pass/Fail" options are marked correctly.
What do you think?

Also check the options under Quiz > Settings > Required. It could be that you have it set to something other than Optional which might be restricting things.

Captivate 5 - quiz and audio problem

Hi there.
Using Captivate 5 I have created an e-learning module that ends with a quiz. I included audio to read up the questions in the quiz.
Question number 1, 2 and three works fine - with number four, the audio goes numb....???? All settings for all questions are the same. What could be a solution to this (other than to leave out the audio....:-( ) ???
Looking for help on this.

Please repost in the Captivate forum.

How Do I Change an Animated Gif's Iteration and Loop Settings? (Pshop/Image Ready 7.0)

Background to Issue (NOT a PPT or Windows issue even though It will seem like that at first but read on...): I have to make Animated GIFS to be inserted into Powerpoint. I work on a Mac but the PPT presentation will be shown on PCs (non-negotiable, since I can't ask hundreds of sales reps who will be using this to install an outdated version of PPT). I already learned that I need to insert the Gifs while working on a PC or else it won't work). Fair enough- I can put it together on a PC, again not the issue. BUT, when I do THAT, the gifs still wn't animate unless I am in PPT 2002. Fair enough (Microsif going backwards not a surprise) So it won't work in PPT 2003 which is what the users will all have. But I need to get the presentation to them asap! I got a bit further in researching and found out that the solution is that I need to set my "Loop Flag" and "Iteration Settings" appropriately. See this link (http://www.soniacoleman.com/Tutorials/PowerPoint/animated_gifs/gifs.htm)
BUT I am trying to find out if one can do this already somehow in Mac Photoshop 7.0 or Mac Image Ready 7.0, where I made the gif and would prefer to keep making my gifs. Maybe I need to upgrade Image Ready or Pshop to CS? SO THE FINAL QUESTION IS: Is there another way to manual do this without this PC Plug-in?
NOTE: Yes, I know how how to set the loop to "once" or "forever" in Image Ready when I make my Gifs but apparently I need to do this somewhere else...where the iteration setting lives too?

There is an ImageAnimator so you may not need to use byte array instead.
ImageAnimator.Animate Method
http://msdn.microsoft.com/en-us/library/system.drawing.imageanimator.animate(v=vs.110).aspx
chanmm
chanmm

My complaints and Questions MP4 M4V video files and other complaints

My complaints and Questions MP4 M4V video files and other complaints
I have been scratching my head as to how to fix my problem and I found some answers and some questions along the way. First of all, I have a video that should be correctly formatted for my iPod. Its specs are:
Kind: MPEG-4 video file
Size: 19.4 MB
Bit Rate: 125 kbps
Date Modified: 8/18/2009 2:15 PM
Play Count: 1
Last played: 8/21/2009 12:25 PM
Profile: Low Complexity
Channels: Stereo
Total Bit Rate: 360 kbps
Video Dimensions: 352x264
Video Codec: H.264
F:\File\AnotherFile\A3rdFile\TheMovieFileInQuestion.mp4
Wow that was a chore. Apple! Let us drag copy and paste our info tabs information so we don’t have to type all this stuff when we are having trouble. **another problem and suggestion** right there.
Ok, back to the problem of the forum.
From what I can see from http://www.apple.com/ipodclassic/specs.html this file falls in line of everything required in order to be able to play on my iPod. It plays in iTunes fine but will NOT sync with my iPod. I get an annoying message that states, “Some of the Songs and videos in your iTunes library, including “BlaBlaBlaiPondFixYourJunkBlaBlaBla”, were not copied to the iPod “My iPod” because they cannot be played on this iPod.” Why oh why can iTunes play this video file but my iPod cant. Especially when the specs on Apple’s website say it can.
So that was bugging me for a LONG time until I found my “Create iPod or iPhone version” option in the “Advanced” heading. Thank goodness this made my files playable on my iPod. Extremely LONG wait though. I know that other programs convert it in ½ the time. But times not to important as long as it gets done, (would be very convenient if it was faster though **Problem and suggestion**)
Ok, now that I have used the “Create iPod or iPhone version” option it has slowly but surly converted my video. Ok, here is my main problem, the new file which is the result of the conversions information is as follows:
Kind: MPEG-4 video file
Size: 35.4 MB
Bit Rate: 125 kbps
Date Modified: 8/18/2009 2:15 PM
Play Count: 1
Last played: 8/21/2009 1:28 PM
Profile: Low Complexity
Channels: Stereo
Total Bit Rate: 658 kbps
Video Dimensions: 352x264
Video Codec: H.264
C:\File\WhyIsThisNewFileInMyMusicFolder\TheMovieFileInQuestion.m4v
So basically it has made my file bigger *not a bonus in my book* greatly increased my Bit Rate *another interesting feature*, and I think the biggest change it has changed it from an .mp4 to an m4v.
Why does it need to be an .m4v I could have sworn some of my videos were or are in mp4 which shouldn’t matter anyway because I was under the impression that iPods could play mp4 files. So that’s my biggest complaint and question. Why can my 80GB classic iPod not play my MP4 files and why am I forced to convert them??
This conversion also creates 2 files in iTunes when I am done which is annoying because I have to go into my files info and look to see what file is the mp3 in order to remove it. Very annoying I can open my iPod options and see the files and some are faded (the ones it can not play) why can’t I remove them from that area.Suggestion Apple please make files that cannot be played on my iPod stand out some how for easier cleaning Suggestion. Thank you.
Speaking of cleaning iPods, when I moved my entire library to an external drive I was faced with a terrible problem. “This file could not be found, would you like to locate file”, I was faced with this annoying message at least 600 times. Now I am glad that iTunes has a little “!” mark to show dead links so that you do some minor cleaning, Good Job iTunes No compliant there. However iTunes has no way of selecting all the broken files for major cleaning (like in my case). Going through and deleting over 600 files 1 by 1 is extremely time consuming and annoying. **Suggestion Apple please add more cleaning features for organizing iTunes**.
Ok, speaking of organization now, another problem that appeared when converting my video files was that it put my new videos into the location where I have all my songs (my external hard drive) why can’t it put the new files in the locations of the original file? I have my computer highly organized and my original files were in that drive in that folder for a reason. If I could open my original file and skip the conversion, my iTunes would go to that specific folder to access the file which is fine. But now these new conversion files are elsewhere taking up space and disorganizing my computer. True I can go into the new location and move the files to where I want them (original location) but I don’t think I should have to hunt them down, copy, move, delete ect etc for all these files over and over. Very annoying, time consuming and should be unnecessary. **Suggestion Make file creation and location more customizable, and user friendly, your customers will love you for it**.
Well since I have gotten into Apples iTunes and iPod problems that I have had to face I might as well bring up one or two more problems and suggestions. About a month after purchasing my iPod a sibling bought one as well. His however is way more convenient then mine. I suppose he has a 5th gen. so here is my question: why does he have a search option and I don’t!!!! Why does he get more features every so often and I don’t?! Why can’t Apple write some software for us classic guys which got the iPods going! It’s very annoying when I have to spend more time looking for the song then I spend actually listening to it, when he can pull his up in like 3-6 seconds? I highly doubt the hardware between our iPods is that dissimilar and even if they are why cant software be written for us. **Suggestion treat all your customers good not just the newer ones, and make some more features for the classics like me and my iPod.” We will be grateful for it I promise.
Ok, I am almost done. Let me just recap my questions, I know my post is kind of lengthy.
#1. Why can’t my iPod play MP3 video files? And why do I have to convert to almost all the same settings except changing it from an mp4 to an m4v. according to Apples own site I should be able to play .m4v .mp4 and .mov files!! Note: remember iTunes plays them fine but my iPod will not.
#2. Would be much more convenient to be able to copy the information from the windows in iTunes so that problems and trouble shooting would be much easier. A little check on off options in iTunes advanced settings would be terrific.
#3. Why is the conversion so slow? Please speed it, you have the power. Convenience is the thing that sells products.
#4. Files that cannot be played on the current iPod need to be easier recognized for simpler cleaning.
#5. Also make an easier way to select all dead link files for faster cleaning, deleting, etc. This one is important.
#6. Make a user friendly way to change where my files are going to end up once I convert them for iPod more options and better customizable settings are need.
#7. One of the most important is ADD A SEARCH OPTION. I and we classics will LOVE Apple for it.
For you readers, I apologize for the long post, and any grammatical errors you might find throughout it. These are problems that I have faced with these programs and hardware and I wanted to make sure they got acknowledged and hopefully addressed. Any information about why I cannot play MP4 Video files on my iPod would be the best. If anything in my post gets answered that’s the one I want most. Will save me a lot of hassle.
Thank you all and I look forward to your suggestions and comments. All are welcome and appreciated.
Sincerely,
Bond, James

Was playing with iTunes and thought of another suggestion! Let us play files in iTunes from an iPod! A friend or sibling should be able to plug his iPod into my computer open iTunes and play any of the files there. Many times I have wanted to show a movie clip or video to a friend, and I have the dock so I can do it on my T.V. but play it on their computer in their iTunes forget it. That would be a very nice feature as well so we can watch our movies at maximum size or listen to music on a better sound system, just another suggestion that would be nice. Thanks

HT1975 Some of my apps and iphone info tells me to go to "settings" and in "settings" go to "location services" to enable apps such as a golf app to use gps . When I go to "settings" there is no option called "location services". Why not?

Some apps and iphone info tells me to go to "settings" and in "settings" choose "location services". Under settings on my phone there is no "location services". What's up with that?

iOS5: Understanding Location Services
iOS6: Understanding Location Services
iOS7: Understanding Location Services
Pick the appropriate link for the version of iOS installed on your device.
FYI, the iPhone 4S never ran iOS4 so the link from which the questions was posted is not relevant to your device.

How do I select which music my ipod quiz has questions on?

The music quiz on my ipod nano 4gb only asks questions on albums with one song on them, which is about 5 in 24. It totally ignores all the other albums with more then one song on them. As you can imagine, it gets quite repetitive. I tried deleting all the albums with one song on them, but then the quiz asked questions on music in general. Is there any way I can change which music the ipod music quiz asks questions on?

Check: Settings - General - About - Version

PDF prints with little boxes and question marks

I prepared a document in Microsoft Publisher 360 and created a pdf with creative cloud.
Looks great and prints great for me.
I emailed it to a few people and it looks great on their screens. However, when they print it,
it comes out with little boxes and question marks.
If I email them the publisher file it is fine.
How I can get them the PDF file without all the odd markings?

You probably used a font that is not on their system and did not embed the font in the PDF when you created it. Don't feel bad. We all have done it. Just make sure to embed your fonts in the Joboptions settings before you recreate the PDF.

Virtex6:Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings

Hello，everyone.
I am using virtex6 FPGA and trying to download mcs file to PROM and have failed.
I download .bit file to FPGA and succeed.
When i try to download .mcs file to PROM XCF128X-FTG64C(BPI Flash) and choose Slave SelectMAP Mode
and the process is about 68% it fails.
The message below the IMapct is as belows:
done.
PROGRESS_END - End Operation.
Elapsed time =      0 sec.
// *** BATCH CMD : identifyMPM
// *** BATCH CMD : assignFile -p 1 -file "C:/Users/Administrator/Desktop/TEST/LED/led.bit"
'1': Loading file 'C:/Users/Administrator/Desktop/TEST/LED/led.bit' ...
done.
INFO:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
UserID read from the bitstream file = 0xFFFFFFFF.
INFO:iMPACT:501 - '1': Added Device xc6vlx240t successfully.
INFO:iMPACT - Current time: 2014/3/13 8:48:14
// *** BATCH CMD : Program -p 1
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
1: VCCAUX Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
'1': Programming device...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:188 - '1': Programming completed successfully.
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
INFO:iMPACT - '1': Checking done pin....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time =     23 sec.
Selected part: XCF128X
// *** BATCH CMD : attachflash -position 1 -bpi "XCF128X"
// *** BATCH CMD : assignfiletoattachedflash -position 1 -file "C:/Users/Administrator/Desktop/TEST/LED/leda.mcs"
INFO:iMPACT - Current time: 2014/3/13 8:49:32
// *** BATCH CMD : Program -p 1 -dataWidth 16 -rs1 NONE -rs0 NONE -bpionly -e -v -loadfpga
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
1: VCCAUX Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
'1': BPI access core not detected. BPI access core will be downloaded to the device to enable operations.
INFO:iMPACT - Downloading core file D:/Xilinx/14.3/ISE_DS/ISE/virtex6/data/xc6vlx240t_jbpi.cor.
'1': Downloading core...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:2492 - '1': Completed downloading core to device.
Current cable speed is set to 6.000 Mhz.
Cable speed is default to 3Mhz or lower for BPI operations.
Current cable speed is set to 3.000 Mhz.
Setting Flash Control Pins ...
Setting Configuration Register ...
Populating BPI common flash interface ...
Common Flash Interface Information Query completed successfully.
INFO:iMPACT - Common Flash Interface Information from Device:
INFO:iMPACT - Verification string: 51 52 59
INFO:iMPACT - Manufacturer ID:        49
INFO:iMPACT - Vendor ID:             01
INFO:iMPACT - Device Code:           18
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Erasing device...
'1': Start address = 0x00000000, End address = 0x008CE03B.
done.
'1': Erasure completed successfully.
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
INFO:iMPACT - Using Word Programming.
'1': Programming Flash.
done.
Setting Flash Control Pins ...
'1': Flash Programming completed successfully.
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Reading device contents...
done.
'1': Verification completed.
Setting Flash Control Pins ...
Current cable speed is resumed to 6.000 Mhz.
'1': Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings.
`Elapsed time =    814 sec.
and i find many people have met the same thing. But they are spartan series FPGA and i try to low the Resistances of Mode pins,M0 M1 and M2, but the problem does not been solved.
I have read the status Registers and find there is an over-temperature state
and in Impact i could not readback the registers. It is strange.
I am anxious about this problem and have not solved it yet
What reasons may it be?
Hope for your answer, thank you

Hi~I want to know if you solve the configuration problem for virtex-6?
As I encounter the  same configuration problem, I want to consult  you with some question.
Can I have your email?
gszakacs wrote:
I have measured the VCCINT and find it is 1.0V, not 2.997V;
That is not at all surprising. I always assumed the problem is with reading the XADC (system monitor) block and not with the voltage or temperature.
my Reference board is ML605
That would have been nice to know at the beginning...
It seems that you have selected the correct mode, assuming your jumpers are set as required in the ML605 Hardware User's Guide. See table 1-27, table 1-33 and the note below it about switch S1.
I'm not that familiar with the details of this reference design, but it may be that the slave SelectMap circuitry requires a reset or power cycle to actually configure the FPGA. Have you tried power-cycling to see if the FPGA boots from the flash?
I'd also suggest that you select the V6 in the JTAG chain view, then go to the debug menu of Impact and select Read Device Status (this is from memory, but it's something like that). That will not only show the bits of the configuration status register, but also describe what each bit means. Among other things you can check the state of the FPGA's configuration logic and the Mode pins.

Quicktime and question marks on web pages

Any time I went to a web page that had a QT in it, it was fine. Now when I go to a webpage I see the QT logo with a question mark in it. What happened!
Thanks in advance

Regardless of what 'happened', Quicktime with a ? refers to Flash video. No idea why this question seems to get asked several times a day, by which I mean why is it suddenly happening to a lot of users. To rectify it, try this:
These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
Assuming you already run OS 10.4.9 or above and have Quicktime 7.2, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer from http://uk.real.com/player/
Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
Adobe FlashPlayer from http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
In Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them).
Important: Now repair permissions and restart.
The world should now be your oyster!
You should also have the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.

Can anyone explain me the procedure and initial settings to do sto for schedule lines?

can anyone explain me the procedure and initial settings to do sto for schedule lines?
Create a STO with new doc type for material M1 to ship from plant 1 to plant 2 with qty as 100. On pressing enter you should be able to see schedule lines in delivery schedule tab. In schedule line you should see the Material availability date, GI date, loading date etc.
can anyone give the answer for this question..

Hi Megha,
Please find below links for Config STO with schedule lines.
http://dhavalatsap.blogspot.sg/p/configuration-of-plant-to-plant-sto.html
https://scn.sap.com/thread/1260375
Thanks,
Bala.

I have disabled the next/skip button in quizes and don't remember how I did it.

I have disabled the next/skip button in quiz and don't remember how I did it. I need to reenable it. Oh yea Captivate 7.

Thank you for responding.
Not sure what you mean. The master question slide looks normal and the project question slide does as well. When I launch the project the Next/skip button is grayed out and I cannot click on it. In the properties it looks the same as the other buttons.

2 attempts quiz and certificate

I have a course with a quiz and a certificate widget. The quiz allows for 2 attempts. My issue is when the student takes the 2nd attempt, the certificate shows an incorrect score. The score is added every time the student takes a new attempt.
I was able to recreate this on a simple 4 slide captivate.with 2 questions and a slide with the certificate widget. After I publish this is how I get the wrong score:
Take the quiz 1st attempt. get a grade of 50% - only answered one question right.
Take the quiz 2nd attempt get a grade of 100% - answered both questions correctly.
Continue to the certificate and the score turns out to be 150%. It seems that it adds the scores instead of giving me the last score.
Please help
Other information:
Captivate 4
widget uses "mainmov.cpQuizInfoPercentage".

How are you retaking the quiz? I think if you go back to where you were before the first quiz question the quiz should reset all stats, accept for number of attmepts. I would try to jump back to before the first question and see if that helps.

How does the crop-lock and "Effect" settings logic work?

The crop lock and Effect setting have in common the fact that they are unpredictable with a strange logic I have yet to figure out. Questions:
What decision process causes the crop lock to remain locked, and then suddenly decide to stay open from one use to the next (Or the reverse).?
What makes the "Effects" decide to retain its last used settings, and sometimes not? (Usually the last customized setting is NOT what I want for the next photo in line to be edited).
Thanks!

Thank you for the reply!
richardplondon wrote:
There is no distinction betwen edited and un-edited. And the tools and controls do not have any defaults of their own aside from what the images possess. You can't put the crop tool on 3:2 and then move from image to image clicking "apply"; this is simply not how the LR interface works.
Understood, except that these settings are an exception. The effects settings will be stuck in the last positions they where on before you created the edit button. See attached photo for what I mean by edit buttons and associated settings. This also applies to graduated filters.
This is difficult to describe. I think I've figured out the logic but cant understand why anyone would want it to work this way: If I choose a setting *before* making the first mark (i.e. new button) with the tool, those settings will persist forever until I change them (even if I change catalogs). If I change the settings AFTER applying the tool, they are forgotten even if I want to keep them. I never want a custom setting to persist into the next photo because the last tool/setting I used will not likely be the first tool used in the next photo.
And just to be clear, the effects I'm referring to are on the right. The timing of WHEN you adjust those settings determines whether or not they persist in what I consider an undesirable way. In other words, in order to avoid messing up the presets, I must always start the tool before adjusting the effects. That is the only way to keep them from persisting into the next tool/button operation.

Quiz and question settings

Similar Messages

Maybe you are looking for