Quote number increment with macro button

Excel 2010 - I am using the following code to convert a worksheet quote to PDF and save to a specified file location.
Sub SavePDF()
ActiveSheet.ExportAsFixedFormat Type:=xlTypePDF, _
Filename:="C:\PDF\Quotation_" & _
ActiveSheet.Range("H8").Value & ".pdf", _
OpenAfterPublish:=False
End Sub
I would also like to have the quote number in cell H8 automatically increment every time this macro button is clicked. Can it be done.

Try this - I hope yo see the changes that were required so that you can expand on it in the future:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
    'Sam, Pete, Joe, and a blank cell in a named range "NamesList"
    'cycle values in cell range (F7:Q7,W7:AH7)
    If Target.MergeCells Then
        If Target.Cells.Count <> Range(Target.Address).Cells.Count Then Exit Sub
    Else
        If Target.Cells.Count > 1 Then Exit Sub
    End If
   If Not Intersect(Target, Range("F7:Q7,W7:AH7")) Is Nothing Then
        Application.EnableEvents = False
        If Target.Cells(1).Value = "" Then
            Target.Cells(1).Value = Range("NamesList").Cells(1).Value
        Else
            Target.Cells(1).Value = Range("NamesList").Cells(Application.Match(Target.Cells(1).Value, Range("NamesList"),
False) + 1)
        End If
        Application.EnableEvents = True
        Exit Sub
    End If
    If Not Intersect(Target, Range("B29:C29,B30:C30,B31:C31,B32:C32"))
Is Nothing Then
        Application.EnableEvents = False
        If Target.Cells(1).Value = "" Then
            Target.Cells(1).Value = Range("TaskList").Cells(1).Value
        Else
            Target.Cells(1).Value = Range("TaskList").Cells(Application.Match(Target.Cells(1).Value, Range("TaskList"),
False) + 1)
        End If
        Application.EnableEvents = True
        Exit Sub
    End If
   If Not Intersect(Target, Range("B17:C22, O17:P22, AA17:AB22")) Is Nothing Then   'specific range
        If UCase(Target.Value) = "OK" Or UCase(Target.Value) = "FIX" Then MakeCircle Target
    End If
End Sub

Similar Messages

  • I open any page on Firefox and the page dimms and a box appears with number 2 and a button (ok) ,I have to press ok to continue Why does this box keep appearing on every page and site and hyow do i stop it ?

    I have uninstalled and reinstalled a few different versions of firefox to check if this was the problem but no. As soon as firefox has started the box appears with the triangle with ! in it the number 2 and the button ,ok.
    I have to press ok to get the page on every page i open. I need help!

    This is caused by the InternetEngine - Powering Applications! extension. If you uninstall that extension it should stop this happening.
    https://support.mozilla.com/kb/Uninstalling+add-ons

  • Assigning a value to a number field through a button

    11gxe , apex 4.x ,
    hi all ,
    i am trying to assign value to a number field through a button ,
    i created a button , then a dynamic action for this button , when it is clicked ,
    the dynamic action is based on Pl\Sql code , and the code is
    begin
    :p2_assign := 455 ; -- where the page is "p2" and the number field is "assign"
    end ;
    but it does not work , why ?

    I can see the toolbar now from the last link you provided me with ,
    but you showed me the way to use the static assigning , and assigning with sql , and i want to do it with "Pl\Sql"
    in order to know why my way of writing the code does not work , although it is written properly , and should work .
    every input item is a variable , and i am doing so
    begin 
    :p2_assign := 455 ; -- where the page is "p2" and the number field is "assign" 
    end ;
    to assign a value to a variable ,
    and
    doing this
    begin 
    select 455 into :p2_no from dual ; 
    end ;  
    to select a value into a variable , then
    why does not it work ??
    and how to do it with pl\sql ?
    thanks

  • How to insert into 2 tables from the same page (with one button  link)

    Hi,
    I have the following 2 tables....
    Employees
    emp_id number not null
    name varchar2(30) not null
    email varchar2(50)
    hire_date date
    dept_id number
    PK = emp_id
    FK = dept_id
    Notes
    note_id number not null
    added_on date not null
    added_by varchar2(30) not null
    note varchar2(4000)
    emp_id number not null
    PK = note_id
    FK = emp_id
    I want to do an insert into both tables via the application and also via the same page (with one button link). I have made a form to add an employee with an add button - adding an employee is no problem.
    Now, on the same page, I have added a html text area in another region, where the user can write a note. But how do I get the note to insert into the Notes table when the user clicks the add button?
    In other words, when the user clicks 'add', the employee information should be inserted into the Employees table and the note should be inserted into the Notes table.
    How do I go about doing this?
    Thanks.

    Hi,
    These are my After Submit Processes...
    After Submit
    30     Process Row of NOTES     Automatic Row Processing (DML)     Unconditional
    30     Process Row of EMPLOYEES     Automatic Row Processing (DML)     Unconditional
    40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
    40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
    40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
    40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
    50     Insert into Tables     PL/SQL anonymous block     Conditional
    My pl/sql code is the same as posted earlier.
    Upon inserting data into the forms and clicking the add button, I get this error...
    ORA-06550: line 1, column 102: PL/SQL: ORA-00904: "NOTES": invalid identifier ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
         Error      Unable to process row of table EMPLOYEES.
    Is there something wrong with the pl/sql code or is it something else?

  • How to get the 4 digit number associated with a SAP icon ( ICON_MAIL )

    Hi Friends,
                   Could anyone please tell me how to get the 4 digit number associated with a SAP icon ( ICON_MAIL ).
                   eg: - For ICON_GREEN_LIGHT the four digit id code is '@08@' (which you can get from ICON table )and the associated 4 digit number is'1003'.
                  Similarly I want to get the 4 digit number for ICON_MAIL(e-mail icon)
    <b><REMOVED BY MODERATOR></b>
    Ashiq
    Message was edited by:
            Alvaro Tejada Galindo

    You can use this report...It's not mine...
    REPORT zdummy_atg_2.
    TABLES: ICON.
    INCLUDE <ICON>.
    FIELD-SYMBOLS: <F>.
    SELECT * FROM ICON.
       ASSIGN (ICON-NAME) TO <F>.
       WRITE:   /(5) <F>, 20 '@',21 ICON-ID+1(2),23 '@',ICON-OLENG,
                ICON-BUTTON,ICON-STATUS,ICON-MESSAGE,ICON-FUNCTION,
                ICON-NAME.
    ENDSELECT.
    Greetings,
    Blag.

  • Integrating PL / SQL with a Button on a Web Page ...

    I would be very grateful if someone could help with the following query.
    I have a database with a table called '*Tbl1*', which contains the following columns:-
    1). tbl1_unique_id (number, primary key);
    2). tbl1_title (VARCHAR2, 200);
    3). tbl1_description (VARCHAR2, 2000);
    4). tbl1_notes (VARCHAR2, 500);
    5). tbl1_status (Open, Closed).
    I have also created a page, which displays all of the records where the tbl1_status is equal to 'Open'.
    What I would like to do is add a button to the page, which when pressed, replaces whatever information is in the tbl1_notes column with a default statement.
    I have managed to produce PL / SQL code, which will query the table and update only those rows where tbl1_status is equal to 'Open' when using the 'SQL Commands' window, but I am having trouble integrating it with a button on the web page.
    I think that I need a 'Page Process', but I do not know what type (Data Manipulation, On Demand, PL / SQL, etc) or how to set it up correctly.
    Any help you can provide with regard to the above query will be appreciated.

    Trevor,
    Navigate to the page where you would like to add the process. Add the button if you've not already done so. Then click the "create page process" button under the Page Processing column.
    Select PL/SQL and click Next >.
    Enter a Name and click Next >.
    Paste your code from the SQL Workshop and click Next >.
    Enter success/failure messages if you like and click Next >.
    Select the button you added and click Create Process.
    Regards,
    Dan
    Blog: http://DanielMcGhan.us/
    Work: http://SkillBuilders.com/apex/

  • How to define  parameters with radio button

    HI
      How to define  parameters with radio button, but that radio button should display in front of the variable name not after variable name. and under that radio button variable I hve to define parameters, select-options and some other radiobutton varibles.
            I don't know how to paste figures here, otherwise i will provied u the figure for more details.
    Regards.

    PARAMETERS : r1 RADIOBUTTON GROUP radi.
    Go to --> text elements --> selection text
    R1    <your text>
    You can change the program selection screen lay out in screen painter (se51) .
    screen number for your selection screen is 1000.
    Regards,
    Santosh reddy
    Edited by: Santosh Reddy on Dec 9, 2008 11:21 AM

  • Selection screen with radio button groups

    hi experts,
    i have 3 frames in selection screen. in first frame i have two radio buttons. if i select 1st radio button 2nd  frame should be in active and  3rd frame should be disable mode. if i select 2nd radio button then 3rd  frame should be in active and other 2nd frame should be disable mode. in which event  i need to write the code.
    can any one help me regarding this and give some sample code.
    rgds,
    nag.

    Here is the example which will explain it completely :
    *& Report  Z_sscr                                                 *
    *  Published at ****************
    *&DYNAMIC Selection screen based on user clicks on the radiobutton*
    REPORT  zsscr.
    *TYPE POOLS DECLARATIONS FOR VALUE REQUEST MANAGER AND ICONS
    TYPE-POOLS : vrm,
                 icon.
    *SELECTION SCREEN FIELDS
    TABLES : sscrfields.
    *GLOBAL DECLARATIONS
    DATA : flag TYPE c,
          tablename(10),
          mmtable LIKE dd02l-tabname,
          sdtable LIKE dd02l-tabname,
          hrtable LIKE dd02l-tabname.
    *DECLARATIONS FOR SELECTION SCREEN STATUS
    DATA it_ucomm TYPE TABLE OF sy-ucomm.
    ***********SELECTION-SCREENS**********************
    SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME.
    *FOR DYNAMIC DISPLAY OF MODULES
    PARAMETERS :  pa RADIOBUTTON GROUP rad USER-COMMAND com MODIF ID mod,
                  pb RADIOBUTTON GROUP rad MODIF ID rad,
                  pc RADIOBUTTON GROUP rad MODIF ID cad.
    SELECTION-SCREEN SKIP.
    **TO INCLUDE DYNAMIC ICONS
    SELECTION-SCREEN COMMENT 2(6) text_001.
    *DYNAMIC LIST BOX BASED ON USER SELECTIONS
    PARAMETERS one AS LISTBOX VISIBLE LENGTH 20  MODIF ID mod.
    PARAMETERS two AS LISTBOX VISIBLE LENGTH 20   MODIF ID rad.
    PARAMETERS three AS LISTBOX VISIBLE LENGTH 20 MODIF ID cad.
    SELECTION-SCREEN END OF BLOCK blk1.
    *DISPLAY DYNAMIC PUSHBUTTON ON APP TOOLBAR ON USER CLICKS
    SELECTION-SCREEN: FUNCTION KEY 1,
                      FUNCTION KEY 2,
                      FUNCTION KEY 3.
    **EVENT ON SELECTION SCREEN FOR OUTPUT DISPLAY
    AT SELECTION-SCREEN OUTPUT.
    *CLICK OF FIRST RADIO BUTTON
      IF pa = 'X'.
        sscrfields-functxt_01 = 'Materials Management'.
        WRITE icon_plant AS ICON TO text_001.
    *CODE TO GET DYNAMICS BASED ON THE SELECTED RADIO
        LOOP AT SCREEN.
          IF screen-group1 = 'MOD'.
            screen-intensified = '1'.
            screen-active = 1.
            screen-display_3d = '1'.
            MODIFY SCREEN.
          ENDIF.
          IF screen-group1 = 'RAD'.
            screen-intensified = '0'.
            screen-active = 0.
            screen-display_3d = '0'.
            MODIFY SCREEN.
          ENDIF.
          IF screen-group1 = 'CAD'.
            screen-intensified = '0'.
            screen-active = 0.
            screen-display_3d = '0'.
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
      ENDIF.
    *CLICK OF SECOND RADIO
      IF pb = 'X'.
        sscrfields-functxt_02 = 'Sales And Distribution'.
        WRITE icon_ws_ship AS ICON TO text_001.
        LOOP AT SCREEN.
          IF screen-group1 = 'RAD'.
            screen-intensified = '1'.
            screen-active = 1.
            screen-display_3d = '1'.
            MODIFY SCREEN.
          ENDIF.
          IF screen-group1 = 'MOD'.
            screen-intensified = '0'.
            screen-active = 0.
            screen-display_3d = '0'.
            MODIFY SCREEN.
          ENDIF.
          IF screen-group1 = 'CAD'.
            screen-intensified = '0'.
            screen-active = 0.
            screen-display_3d = '0'.
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
      ENDIF.
    *CLICK OF THIRD RADIO
      IF pc = 'X'.
        sscrfields-functxt_03 = 'Human Resources'.
        WRITE icon_new_employee AS ICON TO text_001.
        LOOP AT SCREEN.
          IF screen-group1 = 'RAD'.
            screen-intensified = '0'.
            screen-active = 0.
            screen-display_3d = '0'.
            MODIFY SCREEN.
          ENDIF.
          IF screen-group1 = 'MOD'.
            screen-intensified = '0'.
            screen-active = 0.
            screen-display_3d = '0'.
            MODIFY SCREEN.
          ENDIF.
          IF screen-group1 = 'CAD'.
            screen-intensified = '1'.
            screen-active = 1.
            screen-display_3d = '1'.
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
      ENDIF.
    *CUSTOMISING THE TOOLBARS OF THE SELECTION SCREEN
    *WITH F8 BUTTON DISABLED
      APPEND :  'PRIN' TO it_ucomm,
                'SPOS' TO it_ucomm,
                'ONLI' TO it_ucomm.
      CALL FUNCTION 'RS_SET_SELSCREEN_STATUS'
        EXPORTING
          p_status  = sy-pfkey
        TABLES
          p_exclude = it_ucomm.
    **EVENT ON THE SELECTION
    AT SELECTION-SCREEN.
    * LIST BOX ONE VALUES
      CASE one.
        WHEN '1'.
          mmtable = 'MARC'.
        WHEN '2'.
          mmtable = 'MARA'.
        WHEN '3'.
          mmtable = 'MARD'.
        WHEN '4'.
          mmtable = 'MARM'.
      ENDCASE.
    * LIST BOX TWO VALUES
      CASE two.
        WHEN '1'.
          sdtable = 'VBAK'.
        WHEN '2'.
          sdtable = 'VBAP'.
        WHEN '3'.
          sdtable = 'VBUK'.
        WHEN '4'.
          sdtable = 'VBUP'.
      ENDCASE.
    * LIST BOX THREE VALUES
      CASE three.
        WHEN '1'.
          hrtable = 'PA0001'.
        WHEN '2'.
          hrtable = 'PA0006'.
        WHEN '3'.
          hrtable = 'PA0022'.
        WHEN '4'.
          hrtable = 'PA0008'.
      ENDCASE.
    *VALUES FOR CLICK OF THE PUSHBUTTON ON APP TOOLBAR
    *AND ENABLING THE BUTTONS TO PERFORM F8
      CASE sscrfields-ucomm.
        WHEN 'FC01'.
          tablename = mmtable.
          sscrfields-ucomm = 'ONLI'.
        WHEN 'FC02'.
          tablename = sdtable.
          sscrfields-ucomm = 'ONLI'.
        WHEN 'FC03'.
          tablename = hrtable.
          sscrfields-ucomm = 'ONLI'.
      ENDCASE.
    *INITIALIZATION EVENT
    INITIALIZATION.
    *VALUES ASSIGNED TO DROPDOWNLISTS IN THE SUBROUTINES
      PERFORM f4_value_request_pa.
      PERFORM f4_value_request_pb.
      PERFORM f4_value_request_pc.
    *START OF SELECTION EVENT
    START-OF-SELECTION.
    *SUBROUTINE FOR OUTPUT
      PERFORM output.
    *&      Form  f4_value_request_PA
    *       text
    *SUBROUTINE TO PROVIDE DROPDOWN VALUES TO LIST1
    FORM f4_value_request_pa.
      DATA: l_name TYPE vrm_id,
            li_list TYPE vrm_values,
            l_value LIKE LINE OF li_list.
      l_value-key = '1'.
      l_value-text = 'Plant Data for Material'.
      APPEND l_value TO li_list.
      CLEAR l_value.
      l_value-key = '2'.
      l_value-text = 'General Material Data'.
      APPEND l_value TO li_list.
      CLEAR l_value.
      l_value-key = '3'.
      l_value-text = 'Storage Location Data for Material'.
      APPEND l_value TO li_list.
      CLEAR l_value.
      l_value-key = '4'.
      l_value-text = 'Units of Measure for Material'.
      APPEND l_value TO li_list.
      CLEAR l_value.
      l_name = 'ONE'.
      CALL FUNCTION 'VRM_SET_VALUES'
        EXPORTING
          id              = l_name
          values          = li_list
        EXCEPTIONS
          id_illegal_name = 1
          OTHERS          = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM. " f4_value_request_tabname
    *&      Form  f4_value_request_PB
    *       text
    *SUBROUTINE TO PROVIDE DROPDOWN VALUES TO LIST2
    FORM f4_value_request_pb.
      DATA: l_name TYPE vrm_id,
            li_list TYPE vrm_values,
            l_value LIKE LINE OF li_list.
      l_value-key = '1'.
      l_value-text = 'Sales Document: Header Data'.
      APPEND l_value TO li_list.
      CLEAR l_value.
      l_value-key = '2'.
      l_value-text = 'Sales Document: Item Data'.
      APPEND l_value TO li_list.
      CLEAR l_value.
      l_value-key = '3'.
      l_value-text = 'Sales Document:Header Status'.
      APPEND l_value TO li_list.
      CLEAR l_value.
      l_value-key = '4'.
      l_value-text = 'Sales Document: Item Status'.
      APPEND l_value TO li_list.
      CLEAR l_value.
      l_name = 'TWO'.
      CALL FUNCTION 'VRM_SET_VALUES'
        EXPORTING
          id              = l_name
          values          = li_list
        EXCEPTIONS
          id_illegal_name = 1
          OTHERS          = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM. " f4_value_request_PB
    *&      Form  f4_value_request_PC
    *       text
    *SUBROUTINE TO PROVIDE DROPDOWN VALUES TO LIST3
    FORM f4_value_request_pc.
      DATA: l_name TYPE vrm_id,
            li_list TYPE vrm_values,
            l_value LIKE LINE OF li_list.
      l_value-key = '1'.
      l_value-text = 'HR Master :Infotype 0001 (Org. Assignment)'.
      APPEND l_value TO li_list.
      CLEAR l_value.
      l_value-key = '2'.
      l_value-text = 'Address Infotype 0006'.
      APPEND l_value TO li_list.
      CLEAR l_value.
      l_value-key = '3'.
      l_value-text = 'Education Infotype 0022'.
      APPEND l_value TO li_list.
      CLEAR l_value.
      l_value-key = '4'.
      l_value-text = 'Basic Pay Infotype 0008'.
      APPEND l_value TO li_list.
      CLEAR l_value.
      l_name = 'THREE'.
      CALL FUNCTION 'VRM_SET_VALUES'
        EXPORTING
          id              = l_name
          values          = li_list
        EXCEPTIONS
          id_illegal_name = 1
          OTHERS          = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM. " f4_value_request_PC
    *&      Form  OUTPUT
    *       text
    *      -->P_TABLENAME  text
    *fINAL OUTPUT
    FORM output.
      DATA p_table(10).
      p_table = tablename.
    *popup to display teh selected table and
    *Continue button is clicked
      CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
        EXPORTING
          titel        = 'User Selections '
          textline1    = p_table
          textline2    = 'is the Selected table'
          start_column = 25
          start_row    = 6.
    *assigning the table value in p_table to the
    * Table in SE16 transaction by explicitly calling
      SET PARAMETER ID 'DTB' FIELD p_table.
      CALL TRANSACTION 'SE16'.
    ENDFORM.                    "OUTPUT
    Reward If found Helpful.

  • Counting with a button

    Hello,
    I'm new to labview and i stuck with my program!
    I want to control a for loop with a button. so i want every time i press the button the loop count is increased by 1.
    Thnx

    A couple of things:
    1) I would suggest sending the data in a cluster instead of an array
    (actually, it is best for an array of clusters).  It is more
    straight forward to read sets of data (single element of array then
    unbundle).
    2) Why limit the number of time steps?  If I want the temperature to change every hour, why not allow such a thing?
    3) Thermostats are usually continuous (i.e. the stop time from the first step is the start time of the second step, etc.)
    The two vis attached are two suggestions as to how to start your program.
    Message Edited by Robert.Bedford on 09-22-2005 07:59 AM
    Attachments:
    schedule.vi ‏44 KB
    schedule2.vi ‏45 KB

  • Is there a max number of actions a button can have?

    I'm building an interactive matrix in InDesign (CS5.5 Mac) with stacked buttons to implement the change of state for a given spot on the grid. This is working fine in Acrobat, but when I made a "master reset" button in InDesign (setting 96 buttons to "hidden" and 96 buttons to "visible"), not all of the actions transferred to the button when opened in Acrobat.
    My question: is there a limit to the number of show/hide fields a single button can have? If so, I have a pretty good idea how to work around the limit, but want to be sure before proceeding.
    Acrobat 9 Pro, Mac OS 10.6.8.
    Thanks,
    Ben

    I highly recommend you do it with a script. Not only you won't have this
    issue with the maximum number of actions (which I have no answer for,
    sorry), but maintaining it would be MUCH easier and more straight-forward.
    Imagine you decide to change the name of one of the fields, or remove it.
    You'll have to go over all the actions and find the relevant one. In a
    script you could do it in seconds, and it would be much easier to find out
    if something went wrong.

  • My Firefox Browser tool bar ( ... with the buttons "Bookmarks"," History", "Tools". etc, ) has disappeared -- how can i restore it ?

    I access the internet through the Mozilla Firefox browser with a "toolbar"that was originally as described above. My default "home page " is the AOL web site through which I access e-mail . AOL offered a" toolbar" -- I installed it and '''several days later'''the top "bar " on my computer changed to read " Aol - Mozilla Firefox, etc., .... " but with "the buttons " ---" Bookmarks , History , Tools, ...etc. " ---gone . The " Aol Toolbar " is the next" band " down . How do I restore the original configuration ? Can I have two such " tool bars" ? I'd be happy with just the "original ". Thanks --- Hhutson 1

    '''''"Bookmarks"," History", "Tools". etc''''': Those are on the Menu Bar; see below
    '''<u>Menu Bar</u>''' (File, Edit, View, History, Bookmarks, Tools, Help)<br /> Firefox 3.6.x versions allow the user to hide the Menu Bar.<br />
    *Tap the ALT key or the F10 key, Menu Bar will display, click View, click Toolbars, click Menu Bar to place a check mark next to it, '''''OR'''''
    *Press and hold the ALT key while pressing the letters VTM on your keyboard, then release the ALT key
    *See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
    '''<u>Other Toolbars</u>''', see: https://support.mozilla.com/en-US/kb/Back+and+forward+or+other+toolbar+items+are+missing<br />
    '''<u>Status Bar</u>''': click View, click Status Bar to place a check mark<br />
    '''<u>Full Screen Mode</u>''': If you have no Toolbars or Tab Bar: Press F11 (F11 is an on/off toggle). See: http://kb.mozillazine.org/Netbooks#Full_screen<br />
    Also see: http://kb.mozillazine.org/Toolbar_customization_-_Firefox#Restoring_missing_menu_or_other_toolbars
    '''Other issues needing your attention'''
    The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins.<br />
    <br />
    *Adobe PDF Plug-In For Firefox and Netscape
    **'''''Current versions are 9.2.4 and 10.0.1, both security releases on 2011-02-08'''''
    **Info on version 10 (Reader X):
    ***New Adobe Reader X (version 10) with Protected Mode was released 2010-11-19
    ***See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
    #'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    '''Update Adobe Reader (PDF plugin):'''
    #*From within your existing Adobe Reader ('''<u>if you have it already installed</u>'''):
    #**Open the Adobe Reader program from your Programs list
    #**Click Help > Check for Updates
    #**Follow the prompts for updating
    #**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
    #*Download complete installer ('''if you do <u>NOT</u> have Adobe Reader installed'''):
    #**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
    #**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
    #**Click "Save to File"; save to your Desktop (so you can find it)
    #**After download completes, close Firefox
    #**Click the installer you just downloaded and allow the install to continue
    #***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
    #**'''<u>Download link</u>''': ftp://ftp.adobe.com/pub/adobe/reader/
    #***Choose your OS
    #***Choose the latest #.x version (example 9.x, for version 9)
    #***Choose the highest number version listed
    #****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
    #***Choose your language
    #***Download the file, SAVE it to your hard drive, when complete, close Firefox, click on the installer you just downloaded and let it install.
    #***Windows: choose the .exe file; Mac: choose the .dmg file
    #*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
    #**''<u>Also see Download link</u>''': http://get.adobe.com/reader/otherversions/
    #**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
    #*After the installation, start Firefox and check your version again.

  • I want to build a form with radio buttons to limited clients ticking every option.

    I want to build a form with radio buttons to limited clients ticking every option. I have a range of products and in order to quote accurately I want to get specific information.

    If I get this , you want to show form options to specific clients not to all site viewers ?
    You would need to create a secure zone for this where permitted viewers can login and view the form with all options , in form itself we cannot setup this as few customers will view other options and others will view a different one.
    This can be done from your hosting end. Or if you are using Adobe server for hosting then you can create some profiles for customers and then setup a separate form altogether to achieve this.
    Thanks,
    Sanjit

  • A really annoying problem with a button/movie clip

    I am having a problem with a button! its driving me insane
    because i managed to do it last week, but that was by chance and
    now i can't remember how i did it!
    I can get the button (i'm using gelright from the common
    libraries panel) and convert it to a movie clip(by pressing F8) and
    even attach a behaviour but when i play the movie it doen't work!
    when i move the curser over the button it changes into a hand, but
    will not act like a button, even though i have set the behaviour to
    'on release, go to and play keyframe 2'.
    Please help me, for the sake of my laptop goin through the
    wall!

    virgosam20 wrote:
    > first, i found the button i wanted in the common
    libraries (gelright) and
    > added it to the stage. I resized it and converted it
    into a symbol as a movie
    > clip. Then it got added to my library.
    > Then i deleted it from the stage and replaced it with
    the movie cip version i
    > had just converted it to. so now i have the same object
    on the stage, but now
    > its a movie clip and not a button.
    ok - you are running yourself around in circles - why did you
    delete it to the stage only to add it
    again? once you converted it to a movie clip, you had what
    you wanted on the stage - but then you
    deleted it and dragged another instance of the same symbol
    back onto the stage - there's no reason
    to do that.
    > Then i double clicked on it to bring up the movie clip
    timeline, but instead
    > of saying 'top, down, over, hit' (or whatever it says),
    it jsut said 'layer 1'
    > (but this was not my original stage as i have a number
    of layers on that one).
    Right - this is expected because yoyu are now inside the
    movie clip timeline - not the button timeline.
    > When i double clicked on it again, it brought up the
    right headings (top, down,
    > over, etc),
    Right - because by double clicking the button symbol you were
    then brought to "edit mode" for the
    button symbol.
    but there were about 5 layers that showed the different
    layers for
    > the original button.
    Huh? What "5 layers"? What do you mean "original" button -
    per your description there has only ever
    been 1 button you have been working with.
    > I think i have to add the button to each of the
    headings, bt there is no room,
    Lost you completely now - what do you mean add the button to
    each heading? I have no clue what you mean.
    > as when i did it before, there was only one layer for it
    and i had to insert
    > the key frames myself.
    Still losing you here.
    > I then added a behaviour to it using the Behaviours
    pannel, (selected
    > movieclip, then 'go to and play....') and it appears in
    the behaviours pannel.
    > But when i got to Play Movie, although the curser
    changes into a hand, the
    > button does not work.
    That's because you are applying a behavior for a button to a
    movie clip instead.
    I think you went wrong when you converted the button to a
    movie clip - i have no idea why you did
    that or why to think your button needs to be in a movie clip.
    >
    > Hope that can help you with what i've done and you can
    tell me where i've gone
    > wrong.
    >
    I just think you don't understand how timelines, symbols or
    buttons work yet in flash.
    1. drag a button to the stage.
    2. select it and open the Behaviors panel (dont double click
    it to edit it).
    3. add your actions.
    4. test movie.
    (no need for a movie clip here.
    -chris

  • How to render  radiogroup with radio buttons spread out across 2 columns

    Hi,
    I would like to render the following html using JSF (Renderer ??). How do I do that ?
    Basically it has a radiogroup with radio buttons spread out across 2 columns. and with an
    attached input text box along with
    the label for each radiobutton in the radio group.
    Any pointers or examples I can look at to do something like this is appreciated.
    <selectOneRadio does not achieve my functionality nor does MyApacheFaces with a layout="spread" option.
    TIA,
    Vijay
    Here is the html source for what i want to achieve:
    <TABLE border="0" cellpadding="0" cellspacing="1">
         <TBODY>
              <TR>
                   <TD></TD>
                   <TD><span id="searchForm:searchText1">Application Number</span></TD>
                   <TD></TD>
                   <TD><span id="searchForm:searchText2">Agreement Number</span></TD>
              </TR>
              <TR>
                   <TD><input type="radio" id="searchForm:customerSearchRadioGroupId" value="applicationNumber"/></TD>
                   <TD><input type="text" id="searchForm:applicationNumberId" value=""/></TD>
                   <TD ><input type="radio" id="searchForm:customerSearchRadioGroupId" value="agreementNumber"/></TD>
                   <TD><input type="text" id="searchForm:agreementNumberId" value=""/></TD>
              </TR>
              <TR>
                   <TD></TD>
                   <TD><span id="searchForm:searchText3">Infolease Cust.#</span></TD>
                   <TD></TD>
                   <TD><span id="searchForm:searchText4">eCredit Cust.#</span></TD>
              </TR>
              <TR>
                   <TD><input type="radio" id="searchForm:customerSearchRadioGroupId" value="infoLeaseCustNumber"/></TD>
                   <TD><input type="text" id="searchForm:infoLeaseCustNumberId" value=""/></TD>
                   <TD ><input type="radio" id="searchForm:customerSearchRadioGroupId" value="eCreditCustNumber"/></TD>
                   <TD><input type="text" id="searchForm:eCreditCustNumberId" value=""/></TD>
              </TR>
              <TR>
                   <TD></TD>
                   <TD><span id="searchForm:searchText7">Client Number</span></TD>
                   <TD></TD>
                   <TD><span id="searchForm:searchText8">Customer Name</span></TD>
              </TR>
              <TR>
                   <TD><input type="radio" id="searchForm:customerSearchRadioGroupId" value="clientNumber"/></TD>
                   <TD><input type="text" id="searchForm:clientNumberId" value=""/></TD>
                   <TD style="color:red"><span id="searchForm:searchText9">  AND  </span></TD>
                   <TD><input type="text" id="searchForm:custNameId" value=""/></TD>
              </TR>
         </TBODY>
    </TABLE>

    Yeah, I would love to know about this too.
    What I did is (you will hate this solution) I hacked my designers design to make the first column (the radio column) to be one big column. In side this column, I did
    <h:selectOneRadio id="customerSearchRadioGroupId" layout="pageDirection">
    <f:selectItem ..... />
    <f:selectItem .... />
    </h:selectOneRadio>
    this is wack, but I can't think of any other solution. in ASP.NET you get a groupName attribute, which make thigns a lot flexible.
    The problem with this solution is the layout of the output (a table of radio button) didn't line up with the next column of textbox, so I had to go to my designer and have her modify her css.
    If anybody have a solution for this, please let us know.

  • Problem with the buttons

    Recently I have problems with some buttons on my 8800.
    When I hit the trackball the BB writes "Uo". When I hit the 'back' button it writes "Hl". Also the menu button does not what he has to do. Anyone the same problem or even better a solutions for this problem?
    Bye, Ben

    You are not alone.  the same thing happened to me today with my 8820. 
    it worked fine for one call then i hung up and tried looking up a number.  Track ball dosn't work at all, their isnt even a backlight on the trackball.  the back button types in hl.  i also think my e button is enter but i dunno.  that one seems on and off.
    Edit.  I found this:
    http://www.blackberryforums.com/general-8800-series-discussion/114752-blackberry-button-problem.html
    Message Edited by jasgud on 07-27-2008 08:25 PM

Maybe you are looking for

  • ON Query reporting

    hi,    i have heard about SAP -Querry reporting tool , is it any requirement to learn this tool.just clarification. regards pushpa

  • Iphone 5 imessage still on after deactivation?

    so i recently sent in my phone to get fixed.. not to an apple retailer but to a repair shop. everything was fine up until last night. i had activated my old android device while my iphone gets fixed. i was having a conversation with a friend who also

  • How do I manually uninstall FIM Portal and Service 2010

    I installed Forefront Identity Manager 2010 as follows: Server 1: FIM Sync Service Servers 2, 3: SharePoint Farm, FIM Portal and Service I've had issues from the installation. When installing FIM Portal and Service on Server 2 it failed to recognize

  • Problem with creating f60runx executable.

    Hi, I am trying to compile and create f60runx executable to create runtime version to include the user exists. For some reason I am getting an Undefined symbol error. To compile this I am using ins_form60w.mk and env_forms60.mk from /oracle/dev60 dir

  • Pages 5.5 crash

    Hi! Please help me with this! I upgraded to Yosemite yesterday and also updated the whole iWork set. When I tried to open Pages 5.5, I try to make a new document but as I click "Choose" in the document template selection screen, the app crashes sayin