Quotes in the new pages

I have just updated to the new Pages app. Why do I get quotes at the end of some lines? They cant be removed.

Check the glyphs of the font:
http://www.myfonts.com/fonts/feliciano/morgan-sans/morgan-sn-office/glyphs.html
At a quick glance there are missing characters.
Peter

Similar Messages

  • I don't understand why recently with the new "pages" my computer stops responding. When I go to fix some grammar all of a sudden the little colored circle begins to appear and won't go away I restart my computer.

    I don't understand why recently with the new "pages" my computer stops responding. When I go to fix some grammar all of a sudden the little colored circle begins to appear and won't go away I restart my computer.

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after  you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful.

  • How do I move page order in Thumbnails view in the new pages? (which is driving me nuts btw)

    I'm really struggling with the new pages, having used the old version so much I just can't get the hang of this one - so much has changed:( Really wish I hadn't bothered but now have too many documents created in it that I can't open on old version as it doesn't let you (mump mump - well I am scottish).
    So in the old version I used thumbnail view to move about the order of the pages (really useful when making up artwork for magazines etc). Anyone know how to do it on the new version?
    Also can't seem to view document in '2 up' - 2 pages side by side (also very handy for magazines etc).
    Also the tables facility doesn't let you move borders of individual cells - you can only move the whole column - I can't even select them.
    I could go on but will go before I start the 'pages shake'.

    Hilary,
    Scottish or not, your best option is to retreat to the last good version of the app, Pages '09.
    Cut your losses.
    Jerry

  • How can I sort lines of data (alphabetically) in the new pages 5.0?

    How can I sort lines of data (alphabetically) in the new pages 5.0?
    It was very simple to do in the previou version of pages.

    I'm not sure why people are torturing themselves with Pages 5 given the nearly universal outcry on this forum and the incredibly negative reviews elswhere, such as the App Store.
    Pages 4.3 should still be in an iWorks folder within your Applications folder.  Just use that.
    Please remember to tell Apple what we need from them at:
    http://www.apple.com/feedback/pages.html

  • Where does one set space after paragraph in the new Pages 5.0? It used to be under text in the Inspector in the previous version, but I just can't find it in this new version.

    Where does one set space after paragraph in the new Pages 5.0? It used to be under text in the Inspector in the previous version, but I just can't find it in this new version. Paragraphs seem to only be dealt with in styles, and the Formatting window for text doesn't seem to have the space after paragraph contrtol that the older Inspector had. What am I missing?

    Sorry I did this without looking:
    Side panel >Text > Style > Spacing > Turn the triangle > Before Paragraph/After Paragraph/
    This is the trouble with the Peeky Boo Contextual Interface that so many wiser heads than mine love to love.
    Peter

  • In the new Pages 5.0, what is the page break shortcut key. I cannot find the key as indicated on the drop down menu.

    in the new Pages 5.0, what is the page break shortcut key (it used to be the Fn + enter). I cannot find the (new) key as indicated on the drop down menu. Please help.

    Hi Bruce and fruhulda,
    ok, I found the keyboard viewer, it only shows the traditional symbol 'return'.  something like a sideway u-turn continued with the arrow under.  This is the Canadian or US keyboard. 
    btw thanks for your suggestion.

  • How do i layer text boxes in the new pages?

    I have the new pages, and every time i try to layer a text boxes, one text box disappears. How do i change that?

    Please give the exact version number of Pages, it helps when sorting out problems.
    The Textbox doesn't disappear.
    The text in the Textbox is pushed away by the Textwrap on the other Textbox/es.
    Generally, with the Textbox/es selected:
    Toolbar > Format > Arrange > Text Wrap > None
    Peter

  • When I use the new Pages on my iPad, I can't open it on my new computer. It tells me that I must download the new Pages to see the Pages document, but when I try to download the new pages to my computer it tells me all apps are up to date.

    When I use the new Pages app. On my IPod  to type documents, I can't open them on my new computer. It sends me a message that I have to download a newer version of pages to see the Pages document. When I try to do that it tells me all my apps are up to date and will not allow me to upgrade the pages on my iMac.
    Any suggestions?

    What level of OS X is installed on your Mac (your profile is incomplete)?
    Barry

  • Problems with the new Pages.

    Hi everyone.
    I wonder if i am the only one experiencing a little problem with the new Pages?
    My problem is that every other time i want to correct the font lets say trying to underline or make the font fatter using the hotkeys "Command+B" or "Command+U" or "Command+I", or even changing it manually in "formats" my font gets stuck, and i have to copy-paste text from another pages-file into my old one to get et back to normal.
    Anyone else tried this?
    Martin.

    VladRO wrote:
    These are the problems that I am encountering for the moment! If there will come up some new once, I will write them here!
    Instead of starting a new list, go to
    https://discussions.apple.com/thread/5468056?tstart=0

  • Problems with the new Pages for Mac

    I'm starting to see countless problems running the new Pages for Mac (5.0.1) and I can't find a way to resolve them.
    1. when I'm typing and want to delete word(s), I'll use the alt+delete function for ease, however this starts deleting words after the cursor, merging words together and changing my sentece. It comes from when I'm deleting as the new pages is giving me the dropdown menu for the autocorrect word.
    2. grammar check is off. Namely, it picks a random point in a word and moves on from there. EX: "because of the" will have "use of the" underlined in green and give me recommendations to change to "because of the" or "cause of the". Using those recommendations, I'll end up with something like: "becabecause of the"
    3. the find and replace function jumps around in the paper, and sometimes doesn't even display the word currently selected (leaving the user to scroll around looking for what is selected)
    4. Autocorrect has vanished for some reason: no autocapitalization, no turning fractions such as 1/2 into a tidy and neat fraction with small numbers for numerators/denominators, etc.
    I'm still using it, and these are what I have found, so there may be more later as I continue to use it. If anyone has found ways around these bugs, please let me know.
    Thanks!

    Semnani wrote:
    4. Autocorrect has vanished for some reason: no autocapitalization, no turning fractions such as 1/2 into a tidy and neat fraction with small numbers for numerators/denominators, etc.
    Pages 5 now uses the system autocorrect, which does not have as many features as the one inside Pages 4.  Some things you can add manually there.   Others you have to ask Apple to add via
    http://www.apple.com/feedback
    Or continue to use Pages 4 instead.

  • I have recently download the new pages, but from time to time my computer will revert back to the previous page software what can I do to fix this problem

    does anyone have a problem with the new page software? I am currrently running into the same problem with the old pages software re-appearing and any document that I had used with the new update, will not open. The system requires me to attempt to download a new version of page, when the newiest version has aleady been download and has been in operation.
    What can I do to fix this problem? I desire to use the new version at all times.
    Please help
    James

    You just have to be particular with which Pages version you are opening the document. use Right click on the document and choose the right version of Pages.

  • I am trying to save a document with the new pages and it will only save as a zip file any ideas on how to change this?

    I am trying to save a document with the new Pages and it is only saving as a ZIP file anyone know how to fix this or choose a different file type?

    Take a look at the FileSelector
    First make sure the FileSelector is expanded so you can see the directory and sidebar. That's what the little disclosure triangle up by the filename is for. Once the FS has been expanded to look like the above picture, look to see what subdirectory has been selected. Use the SideBar to select an appropriate one.

  • When I click on a link within a Web page, Firefox just spins until I reload the new page.

    When I enter a new URL or select a bookmark, Firefox loads the page promptly. When I click on a link within that page to go to another page, the Firefox tab green spinner often just spins and spins. It either takes a very long time to load (2 or more minutes), or never finishes loading. It's usually a greater problem when I "Open a link in a new tab". I can usually make the new page appear by reloading, either clicking the red X and the circular arrow, or Ctrl-F5, etc.

    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Help! The new Pages. I can't copy an entire page or rearrange the pages. In the new formatt also when I insert a new page when using a template it doesn't give me the formatting and guides.  Can anyone help.

    I can't copy an entire page or rearrange the pages. I use this feature a lot, particularly at this time of year. Can't seen to rmove the header and footer markers either.
    Can anyone help or do I need to revert back to pages 09?
    If I do re-install 09 will I be able to open the files that where converted to the new version?
    I don't like this new one. Many of the graphics features have been removed.  Not impressed at all. Very frustrated.
    The business card templates and others behave strangly.  If I insert a page it's blank only. I don't get the guides.  I was in the middle of a design project and had to start again from scratch as it threw everything out of alignment  and I can't copy an entire page. When I use select all, group then copy when I pasted it on the new page it overlayed all the cards in the top two segments.  Frustrating !  I ended up  saving my first page under a different name that was the only way to copy the page then I had to work between three documents instead of one.
    I went in today to last years Christmas tag file and the same issues I can't copy a page. I can't rearrange the pages.
    Simple features like colour choice and transperency for shapes are gone. I want to use my colour choices not someone else.
    Sorry, I am ranting.
    For now all I need is to be able to copy and switch pages around in one document.
    Please Help! I am about to start pulling my hair out in frustration.

        Yes, I am using 09 with out issues.  Just have to remember to use "open with 09" or open pages 09 first then my document.
      I create some amazing cards and posters with 09 that when on a PC I would have to use both Word and Publisher to create.  Flipping back and forth. 
      Apple if you're  listening please, give us back our layout options and even add a few more design options like beveled and 3D text.

  • How can I re-download the new pages.  App Center won't let me.  Says it is installed.

    I have messed up Pages 5 and now all I have on my Mac is the old pages 4.?  When I go to the App Center it tells me that the new Pages is installed.  But I have corrupted it somehow and need to download it again.  How do I do that when the App Store tells me it is already installed?

    Dah veed,
    I tried this but when I go to the purschases page, Pages in greyed out and still says "installed."  Any other suggestons?
    I can't find anywhere where another copy of Pages is installed.

Maybe you are looking for

  • How can I tell that AutoQOS config is adequate on a video conference switch

    I have a Tandberg video conference bridge and gateway connected to a 3750 switch. The audio is marked EF and the video CS3. I configured AutoQos on the switch and trust DSCP on the ports. When we reach a large video conference of 25 or more attendies

  • Response Message Namespace Resolution

    I'm working on an application that creates xml messages from wsdls and then sends them out and picks up the response (like a basic web service). I've encountered a problem with the resoultion of namespaces on the parts of the response message of an o

  • Nano does not appear in Itunes. Most of the time.

    Ah, I need help. I received my Ipod nano on Tuesday, and here it is Saturday, and it still isn't working properly. What it can't do: - Itunes does not recognize the Ipod Nano; under preferences, it says that no Ipod is connected - Cannot be found in

  • Issue with EAN/UPC field in "BAPI_MATERIAL_SAVEDATA"

    Hello guys, I have a requirement where I am using the BAPI_MATERIAL_SAVEDATA to create a new material by using a reference material. The question is how can i pass EAN/UPC field into it? This field exists in Basic Data1 tab in MM01 screens. I am not

  • Experts Only:  Difficult Pixel Aspect Ratio Problem

    I am having trouble with the PAR (and Screen Aspect Ratio) from one particular camera that belongs to the client. It's a Sony SR-100 SD camera that records some form of MPEG-2 directly to a HDD. Normally I don't have trouble sussing out aspect ratios