R/3 job and get the details of variants like (from and to)
Hi,
How to find R/3 job and get the details of variants like (from and to) for that job.
the job is extraction job and running for 4 hours in R/3 once atfer this job completes BW job will start executing. Now i have to analyse R/3 job that how many years of data it is extracting (from, to) and other useful information why it is taking time for 4 hours.
Please let me know what transaction i have to use and how to check this information in R/3 side.
Thanks,
Hi........
Go to SM37 >> select the job >> Click on Job log.........Check there whether u r getting any Clue or not...........Is this load is through PSA..........? if so check the records of the First data packet...........then the Last data packet............from there u can get some idea..................
Also u can check the data in the Extractor.......is it a full load?.............Go to RSA3 >> Execute..........there check the data........
Is it a LO datasource ? if so................Go to LBWE >> Click on maintenance link for your datasource........>> Here in the Right pane u can see the Structute associated with that Datasource ...........If u remove MC from those structure name............u will get the table name..............In those tables also u can check the data...............there should be some data field.............from where u can get some idea.........
If ur Extractor is extracting data using some Function Module.............then open the datasource using RSA2.............there double click on the Exrtractor..............u will get the function module.................u can try to analyze the function module............
For Variants..................select the job >> click on Step in the top >> then Go to in the top >> Variant..............but I don't think this will help u............this will tell u that this Extraction job is part of which chain or IP......
Regards,
Debjani..........
Similar Messages
-
hello, all of a sudden without apparent reason I can't get "MAIL" to function. It starts up but I get the color wheel turning like crazy and never ends. I've tried restarting and I still can't get it to work. PLEASE HEEELP!?
In the Desktop Manager > Sync > Configuration, make sure the calendar options are set to override Outlook.
Set it also to notify you of the changes, so you will have to approve any changes.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Just to give an example, Microsoft IIS webserver provides the
performance counters, which one can read from registry using
APIs provided by Microsoft from a C/C++ program and get all the
performance related data ... r some similar interfaces
provided by iPlanet webserver ???The spell checked version...
I really appreciate the replies. I have looked into RMI and think it might fit the bill, ,BUT, let me clarify a bit and see if there are any other ideas floating around out there.
A user, using a web interface on machine A will click the , "I want my file" button. This flags the DB to create a file for that user. I will have multiple daemons running on other machines B,C,D whose sole job is to check the db, compile the file (This is the part that takes huge overhead so I wanted it distributed), then write the file. The trick is the file needs to be written to machine A. So I figure, using RMI, I can write a simple "write this file" object that will accept a byte stream or byte array, and a correct path to write to. Does this sound like a good methodology?
I've never done anything like this so I am really shooting in the dark.
Thanks again for the posts.
Paul -
Trying to sync my iPad and get the message that "all existing apps and their data will be replaced"
Previously my Windows 7 laptop didn't recognise my iPad but I persevered and now am getting the message when trying to update the iOS that if I sync, "all existing apps and their data will be replaced" so I'll lose everything I've bought since I last synced (which is a while). How can I back up my apps before syncing fully and then updating. I have 'transferred purchases' using the File menu but still getting the message.
Message was edited by: annielevoSounds like you have created a new library somehow. Ideally you would restore your old library and the problem would go away. If that is not possible then you should be able to:
Backup the device to the computer
Transfer your purchases into an authorized library
Recover any other media using third party tools as suggested in this post from forum regular Zevoneer
Download remaining past purchases from iTunes in the Cloud, where available
Restore the device from the backup
This process should switch the association of the device to the new library, preserving the data and settings in your apps.
May also be prudent to attempt a backup to iCloud directly from the device before you start... Settings > iCloud > Storage & Backup > iCloud Backup > On. It won't save any media but it would preserve the general account settings and documents in case anything goes wrong while you are trying to extract your other data.
When you get it all fixed, make a backup!
tt2 -
Often sites display the site in the middle with filler to the side. Now there is an image there that doesnt show up on Opera but now it does on firefox
Thanks C for taking the time to help!
I did safe mode as you suggested and things were set to the default theme.
It still didn't display like it did before I "upgraded".
Let me ask this another way. Looking at this very site, the whole website is displayed in the center of the screen and the sides are blank. Meaning that there is a bunch of wasted space. How do I configure firefox so it fills the screen?? If I could see just the middle portion that is how it used to display things.
Here is what I mean:
[space space WEBSITE space space]
I just want to see:
[W E B S I T E]
And only that filling the screen.
Thanks again for the help! -
Getting the Details from a HTTP Request using C#
Hi,
Suppose, a user submits a form with some details as Address, Phone Number etc.. to a Web Application. On the client side, I need to have a proxy to intercept this http request message being sent to the Server and get the details in it like Phone number and
Address in this case and display them to user in a pop up box for confirming and if he clicks YES, then only I should forward the request to Web Server/Web Application.
If the user feels that the information shown to him is not correct he can Click NO and the request will not be sent to the Server. Anyone know how to use this in DOTNET WEB APPLICATIONS?
I need to write code for the Proxy Part, I am not sure how to handle HTTP messages and from where to start with. Any help would be of great help.
Thanks
K.V.N.PAVANhttp://forums.asp.net/
Yu have many sections to choose from concerning Web based solutions. -
Hi Experts,
I am trying to build a PowerShell Script to get the details Like Scope,Last Deployed date and Name for a Solution Deployed in the Farm.
Can anyone advise on this please.
RegardsGet-SPSolution|Select Name,Scope,LastOperationResult,LastOperationEndTime|Export-CSV "SPInstalledSolutions.csv" -NoTypeInformation
SPSolution properties
Get-SPSolution
This post is my own opinion and does not necessarily reflect the opinion or view of Slalom. -
Query to get the details of Blocking and deadlock occurred for the Day
Hi,
I need a query to get the details of blocking and deadlock occurred for the day.You havent specified which version of SQL you are using which makes it difficult to give a solution. Assuming its latest versions , by default SQL Server (in any versions) doesnt track blocking information.
You need to run some kind of queries/traces to capture blocking. The same goes with Deadlocks where majority of the DBA's enable trace flag 1222/1205 when they suspect deadlocks happening.
Check this link -
http://dba.stackexchange.com/questions/10644/deadlock-error-isnt-returning-the-deadlock-sql/10646#10646
This link gives code to get historic deadlock information. I havent used it , I just googled to get that.
That being said if you are looking for something to capture for the future check the below links.
Check these links on how to setup extended events to capture deadlock and blocking.
http://sqlblog.com/blogs/jonathan_kehayias/archive/2010/12/21/an-xevent-a-day-21-of-31-the-future-tracking-blocking-in-denali.aspx
http://blogs.msdn.com/b/sqlserverfaq/archive/2013/04/27/an-in-depth-look-at-sql-server-memory-part-2.aspx
http://blogs.technet.com/b/mspfe/archive/2012/06/28/how_2d00_to_2d00_monitor_2d00_deadlocks_2d00_in_2d00_sql_2d00_server.aspx
HTH
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com -
How to get the Details Regarding the tcode like used by and used in .
Hi all,
My requirement is if i give the Z* Tcode in the selection screen I should get the details like program Name and Creator Name and created on and last Changed by and used by and used in Related Data.
Somehow i managed to get all the data except for two fields used by and used in .Please let mke know is there any Function Module to fetch the used by(User Name ) and used in data or any table where this data is saved.
Thanks in Advance.
Regards,
NaveenHi Naveen,
What are you exactly looking for in "used by" (if it's who launched the transaction lastly -> performance statistics, transaction ST03N, search forum how to read it) and "used in" (programs in which the transaction is statically defined in CALL TRANSACTION, and other statements -> CROSS table)?
BR
Sandra -
When I want to create apple account for my new iphone5 with different apple id than this in billing and card details page I am stuck and get the message contact itune store support to complete this transaction. Need to know what to do as I can't creat apple id
The first step would probably be to contact iTunes support as you're being told to do.
-
When I try to open a download PDF I get message to install Adobe Reader. I do it and get the same message already installed. I close Safari and reopen but get same message to install Adobe
You don't provide any details, but from the sound of it you are trying to open an online PDF in a browser that does not use the Adobe Reader plugin: http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html
-
Is there a way to get the details for each hit in the portal database WCR_WEBCONTENTSTAT?
Hi,
I need to get the details for each user hit.
Apparently, this table has the IMPRESSIONS column which returns the total number of hitcounts and VISITS which counts the number of unique user who accesses the portal. What I am trying to look for is to get all the details per hitcount. I need to find out how many time a specific user accessed a specific page or iview.
I also used the table WCR_USERPAGEUSAGE, which I get the information of the users counted in the VISITS column in the first table.
I could not get the specific user per hit.
Please enlighten me if this is possible and how to do this?
Thanks!Hi Catherine,
Why not use the portal activity report iView?
In the portal activity report iView the 3rd option allows you to choose a page for example and see
the user who accessed it and how many times.
Thanks and BR,
Saar -
How to get the link between mara, ausp, cawn and cawnt tables
hello ABAPERS
i have got a requiremet in that i have to get the relation .
how to get the link between mara, ausp, cawn and cawnt tables and also type how can we get link between char value and char description in cawn and cawnt tables through ausp and mara tables.
I would be very thankful for ur help in advance.
Thanks & Regards.
soniHi,
Sample report using the linkage between tables;
report batch_char no standard page heading
line-size 132
line-count 58(1)
message-id mm.
Report by Batch Characteristic *
Description : Report by Batch Characteristic *
Declaration for Tables
tables: mara, " Material Master
mard, " Storage Location Data for Material
t001w, " Plants/Branches
t001l, " Storage Locations
cabn, " Characteristics
inob. " Link between Internal Number and Object
Declaration for Constants
constants : c_klart like ausp-klart value '023', " Class Type
c_obtab like inob-obtab value 'MCH1', " Database Table
c_flag type c value 'X', " Flag
c_c23 type i value '23', " Ratio
Constants for Ratio Categories
c_13 type p decimals 2 value '13.00', " For Ratio 13
c_1499 type p decimals 2 value '14.99', " For Ratio 14.99
c_15 type p decimals 2 value '15.00', " For Ratio 15
c_1699 type p decimals 2 value '16.99', " For Ratio 16.99
c_17 type p decimals 2 value '17.00', " For Ratio 17
c_1899 type p decimals 2 value '18.99', " For Ratio 18.99
c_19 type p decimals 2 value '19.00', " For Ratio 19
c_2099 type p decimals 2 value '20.99', " For Ratio 20.99
c_21 type p decimals 2 value '21.00', " For Ratio 21
c_2299 type p decimals 2 value '22.99', " For Ratio 22.99
c_23 type p decimals 2 value '23.00', " For Ratio 23
c_g23(4) type c value '>=23', " For Ratio >=23
c_ratio(5) value 'RATIO', " For Ratio
Constants for Storing Selected item field information
c_cursor1(15) value 'I_OUTPUT1-MEINS', " For Selected Base
" Unit of Measure
c_cursor2(15) value 'I_OUTPUT1-MATNR', " For Selected Base
" Material Number
c_cursor3(15) value 'I_OUTPUT1-MAKTX', " For Selected Base
" Material Des.
c_cursor4(15) value 'I_OUTPUT1-CLABS', "For Selected Base
" Stock Value
c_cursor5(15) value 'I_OUTPUT1-ATFLV', " For Selected Base
" Char.Value (Ratio)
c_cursor6(5) value 'C_G23'.
Declaration for Global Variables
data : g_exit type c, " Flag
g_clabs1(16) type c, " Quantity
g_clabs(18) type c, " Quantity
g_cursor(15) type c, " Cursor field name
g_matnr type mara-matnr, " Material Number
g_werks type mchb-werks, " Plant
g_atinn(30) type c. " Character.
Declaration for Internal tables
Internal table to hold Batch Stock data
data : begin of i_mchb occurs 0,
matnr like mchb-matnr, " Material Number
werks like mchb-werks, " Plant
lgort like mchb-lgort, " Storage Location
charg like mchb-charg, " Batch Number
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Unit of measure
atflo like ausp-atflv, " Char.Value (Ratio)
atflv like ausp-atflv, " Char.Value (Ratio)
end of i_mchb.
Internal table to hold Secondary List data
data : begin of i_mchb1 occurs 0,
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
lgort like mchb-lgort, " Storage Location
charg like mchb-charg, " Batch Number
atinn like ausp-atinn, " Char.Value
clabs like mchb-clabs, " Stock Value
atflo like ausp-atflv, " Char.Value (Ratio)
atflv like ausp-atflv, " Char.Value (Ratio)
end of i_mchb1.
Internal table to get the Plant Name
data : begin of i_plant occurs 0,
werks like t001w-werks, " Plant
name1 like t001w-name1, " Name
end of i_plant.
Internal table to get the Material Description
data : begin of i_makt occurs 0,
matnr like makt-matnr, " Material
maktx like makt-maktx, " Description
end of i_makt.
Internal table to hold AUSP data
data : begin of i_ausp occurs 0,
objek like ausp-objek, " Object No
atinn like cabn-atinn, " Characteric value
atflv like ausp-atflv, " Characteristic Value
end of i_ausp.
Internal table to hold output data
data : begin of i_output occurs 0,
atinn like cabn-atinn, " Characteric value
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
atnam like cabn-atnam, " Characteristic
atflv like ausp-atflv, " Char.Value (Ratio)
name1 like t001w-name1, " Plant Description
maktx like makt-maktx, " Material Description
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Base Unit of Measure
end of i_output.
Internal table to hold final Output data
data : begin of i_output1 occurs 0,
atinn like cabn-atinn, " Characteric value
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
atnam like cabn-atnam, " Characteristic
atflv(32) type c, " Char.Value (Ratio)
name1 like t001w-name1, " Plant Description
maktx like makt-maktx, " Material Description
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Base Unit of Measure
end of i_output1.
Selection screen
selection-screen begin of block b1 with frame title text-001.
select-options: s_werks for t001w-werks obligatory, " Plant
s_lgort for t001l-lgort, " Stor.Location
s_matnr for mara-matnr obligatory, " Material No
s_atinn for cabn-atinn. " Character.
selection-screen end of block b1.
At selection screen
at selection-screen.
Validation of Selection Screen Fields
perform validate_screen.
Start of selection
start-of-selection.
Get the Material and Batch Stock data from MARA and MCHB Tables
perform get_mat_stock_data.
Get the Material Group Text and Plant Name from T023T and T001W Tables
perform get_plant_grp_data.
Append the data into final Output Internal Table after getting the
Characteristic Values data from INOB and AUSP Tables
perform append_final_data.
Processing if the Characteristics contain 'RATIO'
perform collect_ratio.
End-of-Page
end-of-page.
write /1(125) sy-uline.
End of selection
end-of-selection.
if g_exit <> c_flag.
Display the Report Output data
perform display_report.
endif.
Top-of-Page
top-of-page.
Write the Report and Column Headings
perform get_headings.
at line-selection
at line-selection.
if sy-lsind = 1.
perform display_batch.
endif.
Top of page during line-selection
top-of-page during line-selection.
perform heading_seclist.
Form validate_screen
Validation of Selection Screen fields
form validate_screen.
Validation of Plant
clear t001w.
if not s_werks[] is initial.
select werks
into t001w-werks
from t001w
up to 1 rows
where werks in s_werks.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Plant'(002).
endif.
endif.
Validation of Material Number
clear mara.
if not s_matnr[] is initial.
select matnr
into mara-matnr
from mara
up to 1 rows
where matnr in s_matnr.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Material'(003).
endif.
endif.
Validation of Storage Location
clear t001l.
if not s_lgort[] is initial.
select lgort
into t001l-lgort
from t001l
up to 1 rows
where lgort in s_lgort.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Storage Location'(004).
endif.
endif.
Validation of Characteristic Value
clear cabn.
if not s_atinn[] is initial.
select atinn
into cabn-atinn
from cabn
up to 1 rows
where atinn in s_atinn.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Characteristic Value'(005).
endif.
endif.
Validation of Plant, Material and Storage Location
clear mard.
select matnr werks lgort
into (mard-matnr, mard-werks, mard-lgort)
from mard
up to 1 rows
where matnr in s_matnr and
werks in s_werks and
lgort in s_lgort.
endselect.
if sy-subrc <> 0.
message e899 with 'No Data found for the Selection Criteria'(006).
endif.
endform. "validate_screen
*& Form get_headings
Write the Report and Column Headings
form get_headings.
data: l_repid type sy-repid.
l_repid = sy-repid.
call function 'Y_STANDARD_HEADING'
exporting
repid = l_repid
heading1 = sy-title.
write:/1(125) sy-uline.
format color col_heading on.
write : /1 sy-vline, 2(18) 'Material Number'(008) centered,
20 sy-vline, 21(40) 'Material Description'(011) centered,
61 sy-vline, 62(22) 'Ratio'(009) centered,
84 sy-vline, 85(18) 'Quantity'(010) centered,
103 sy-vline, 104(20) 'Base Unit of Measure'(015) centered,
125 sy-vline.
write:/1(125) sy-uline.
format color off.
endform. "get_headings
*& Form get_mat_stock_data
Get the Material and Batch Stock data from MARA and MCHB Tables
form get_mat_stock_data.
clear: i_mchb,i_output, i_output1.
refresh: i_mchb,i_output, i_output1.
select a~matnr " Material Number
b~werks " Plant
b~lgort " Storage Location
b~charg " Batch Number
b~clabs " Stock Value
a~meins " Base Unit of Measure
into table i_mchb
from mara as a inner join mchb as b
on amatnr eq bmatnr
where b~matnr in s_matnr and
b~werks in s_werks and
b~lgort in s_lgort.
if sy-subrc <> 0.
g_exit = c_flag.
message s899 with 'No Data found for the Selection Criteria'(006).
stop.
endif.
sort i_mchb by matnr werks lgort charg.
endform. " get_mat_stock_data
*& Form get_plant_grp_data
Get the Material Group Text and Plant Name from T023T and T001W
form get_plant_grp_data.
if not i_mchb[] is initial.
Get the Plant Description from t001w Table
clear i_plant.
refresh i_plant.
select werks " Plant
name1 " Name
into table i_plant
from t001w
for all entries in i_mchb
where werks = i_mchb-werks.
Get the Material Description from MAKT Table
clear i_makt.
refresh i_makt.
select matnr " Material number
maktx " Material Description
into table i_makt
from makt
for all entries in i_mchb
where matnr = i_mchb-matnr and
spras = sy-langu.
sort i_plant by werks.
delete adjacent duplicates from i_plant comparing werks.
sort i_makt by matnr.
delete adjacent duplicates from i_makt comparing matnr.
endif.
endform. "form get_plant_grp_data.
*& Form append_final_data
Append the data into final Internal Table
form append_final_data.
data : l_matbatch(28),
l_tabix like sy-tabix.
if not i_mchb[] is initial.
loop at i_mchb.
l_tabix = sy-tabix.
clear l_matbatch.
concatenate i_mchb-matnr i_mchb-charg into l_matbatch.
move-corresponding i_mchb to i_output.
Get the Plant Description from i_plant Table
read table i_plant with key werks = i_mchb-werks binary search.
if sy-subrc = 0.
i_output-name1 = i_plant-name1.
endif.
Get the Material Description from i_makt Table
read table i_makt with key matnr = i_mchb-matnr binary search.
if sy-subrc = 0.
i_output-maktx = i_makt-maktx.
endif.
Get the Characteristic Values data from INOB and AUSP Tables
clear inob.
select single cuobj from inob
into inob-cuobj
where klart = c_klart and
obtab = c_obtab and
objek = l_matbatch.
if sy-subrc = 0.
select objek
atinn
atflv
from ausp
into table i_ausp
where objek = inob-cuobj and
atinn in s_atinn and
klart = c_klart.
sort i_ausp by objek atinn.
loop at i_ausp.
clear cabn.
select single atinn atnam from cabn
into (cabn-atinn,cabn-atnam)
where atinn = i_ausp-atinn.
if sy-subrc = 0.
If the ratio value is between 13-14.99, display 13
if cabn-atnam cs c_ratio.
if i_ausp-atflv between c_13 and c_1499.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_13.
If the ratio value is between 15-16.99, display 15
elseif i_ausp-atflv between c_15 and c_1699.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_15.
If the ratio value is between 17-18.99, display 17
elseif i_ausp-atflv between c_17 and c_1899.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_17.
If the ratio value is between 19-20.99, display 19
elseif i_ausp-atflv between c_19 and c_2099.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_19.
If the ratio value is between 21-22.99, display 21
elseif i_ausp-atflv between c_21 and c_2299.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
elseif i_ausp-atflv >= c_23.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_23.
endif. " Condition for RATIO values
else. " If characteristic does contain RATIO
i_mchb-atflv = i_ausp-atflv.
endif.
i_output-atinn = cabn-atinn.
i_output-atnam = cabn-atnam.
i_output-atflv = i_ausp-atflv.
i_mchb1-matnr = i_mchb-matnr.
i_mchb1-werks = i_mchb-werks.
i_mchb1-lgort = i_mchb-lgort.
i_mchb1-charg = i_mchb-charg.
i_mchb1-clabs = i_mchb-clabs.
i_mchb1-atinn = i_ausp-atinn.
i_mchb1-atflo = i_mchb-atflv.
i_mchb1-atflv = i_ausp-atflv.
append : i_output, i_mchb1.
clear i_mchb1.
modify i_mchb index l_tabix transporting atflo atflv .
endif.
endloop.
endif.
endloop.
endif.
Checking whether the table is filled or not
if not i_output[] is initial.
sort i_output by atinn werks matnr atflv.
else.
g_exit = c_flag.
message s899 with 'No Data found for the Selection Criteria'(006).
endif.
Delete the records where RATIO is less than 13.
delete i_output where atnam cs c_ratio and atflv lt c_13.
endform. "append_final_data
*& Form display_report
Display the Report Output data
form display_report.
data: l_tabix like sy-tabix.
loop at i_output1.
l_tabix = sy-tabix.
At new Characteristic
at new atinn.
read table i_output1 index l_tabix.
format color 1 intensified on.
write: /1 sy-vline, 2(20) 'Characteristic Name:'(007),
23(40) i_output1-atnam,
125 sy-vline.
format color off.
format color 4 intensified on.
write: /1 sy-vline, 2(20) 'Plant Name :'(022),
23(4) i_output1-werks, 29(30) i_output1-name1,
125 sy-vline.
format color off.
write /1(125) sy-uline.
endat.
clear: g_clabs, g_clabs1.
format color col_normal.
write :/1 sy-vline, 2(18) i_output1-matnr,
20 sy-vline, 21(40) i_output1-maktx,
61 sy-vline.
if i_output1-atflv = c_c23.
write: 62(22) c_g23 centered.
else.
shift i_output1-atflv left deleting leading space.
write: 62(22) i_output1-atflv centered.
endif.
write: 84 sy-vline,
103 sy-vline,
110(5) i_output1-meins.
If the quantity value is negative
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
hide : i_output1.
new-line.
At end of material
at end of matnr.
sum.
move : i_output1-matnr to g_matnr.
format color 3 intensified on.
write /1(125) sy-uline.
write :/1 sy-vline, 2(25) 'Total for Material :'(012),
28(18) g_matnr.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
write: 125 sy-vline.
format color off.
write /1(125) sy-uline.
endat.
At end of plant
at end of werks.
sum.
move : i_output1-werks to g_werks.
format color 3 intensified off.
write :/1 sy-vline, 2(25) 'Total for Plant :'(013),
28(4) g_werks.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
write /1(125) sy-uline.
endat.
At end of characteristic
at end of atinn.
read table i_output1 index l_tabix.
sum.
format color 3 intensified on.
write :/1 sy-vline, 2(25) 'Total for Characteristic:'(014),
28(25) i_output1-atnam.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
write /1(125) sy-uline.
endat.
endloop.
endform. " display_report
*& Form DISPLAY_BATCH
Display the batch details for the seclected material *
form display_batch.
Get the batch details for the selected material
get cursor field g_cursor.
if g_cursor = c_cursor1 or
g_cursor = c_cursor2 or
g_cursor = c_cursor3 or
g_cursor = c_cursor4 or
g_cursor = c_cursor5 or
g_cursor = c_cursor6.
format color 3.
write: /1 sy-vline,
2(17) 'Material Number :'(020),
20(17) i_output1-matnr,
94 sy-vline.
format color off.
write /1(94) sy-uline.
loop at i_mchb1 where matnr = i_output1-matnr and
atinn = i_output1-atinn and
atflo = i_output1-atflv.
format color col_normal.
shift i_mchb1-charg left deleting leading '0'.
write :/1 sy-vline, 2(16) i_mchb1-lgort centered,
18 sy-vline, 19(17) i_mchb1-charg centered,
36 sy-vline.
if i_output1-atnam cs c_ratio.
write: 37(29) i_mchb1-atflv
exponent 0 decimals 2 centered.
else.
write : 37(29) i_mchb1-atflv
exponent 0 decimals 0 centered.
endif.
write : 66 sy-vline, 67(27) i_mchb1-clabs unit i_mchb-meins,
94 sy-vline.
format color off.
endloop.
write /1(94) sy-uline.
else.
message s899 with 'Invalid cursor position'(016).
exit.
endif.
endform. " DISPLAY_BATCH
*& Form HEADING_SECLIST
Write the Column Headings for Interactive Report
form heading_seclist.
write /1(94) sy-uline.
format color col_heading on.
write :/1 sy-vline, 2(16) 'Storage Location'(021),
18 sy-vline, 19(17) 'Batch Number'(017) centered,
36 sy-vline, 37(29) 'Characteristic Value'(018) centered,
66 sy-vline, 67(27) 'Quantity'(019) centered,
94 sy-vline.
write /1(94) sy-uline.
format color off.
endform. " HEADING_SECLIST
*& Form COLLECT_RATIO
Display the Characteristic ratio data
form collect_ratio.
loop at i_output.
clear g_atinn.
i_output1-atinn = i_output-atinn.
i_output1-atnam = i_output-atnam .
i_output1-werks = i_output-werks.
i_output1-name1 = i_output-name1.
i_output1-matnr = i_output-matnr.
i_output1-maktx = i_output-maktx.
i_output1-clabs = i_output-clabs.
i_output1-meins = i_output-meins.
call function 'CONVERSION_EXIT_ATINN_OUTPUT'
exporting
input = i_output-atinn
importing
output = g_atinn.
if g_atinn cs c_ratio.
If the ratio value is between 13-14.99, display 13
if i_output-atflv between c_13 and c_1499.
i_output1-atflv = c_13.
If the ratio value is between 15-16.99, display 15
elseif i_output-atflv between c_15 and c_1699.
i_output1-atflv = c_15.
If the ratio value is between 17-18.99, display 17
elseif i_output-atflv between c_17 and c_1899.
i_output1-atflv = c_17.
If the ratio value is between 19-20.99, display 19
elseif i_output-atflv between c_19 and c_2099.
i_output1-atflv = c_19.
If the ratio value is between 21-22.99, display 21
elseif i_output-atflv between c_21 and c_2299.
i_output1-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
elseif i_output-atflv >= c_23.
i_output1-atflv = c_23.
endif.
write i_output1-atflv to i_output1-atflv .
else.
write i_output-atflv to i_output1-atflv exponent 0 decimals 0.
endif.
collect i_output1.
clear i_output1.
endloop.
sort i_output1 by atinn werks matnr atflv.
endform. " COLLECT_RATIO
Reward if useful..
Regards,
Anji -
How to get the detailed version of ORACLE?
hi,
the version of Oracle Enterprise Version is 9.2.0.2.0, recently I patched it to 9.2.0.6.0, and wanted to get the detailed version by using MetaData in OCCI, but what I got is still 9.2.0.2.0. how can I get the "9.2.0.6.0"?
thanks for your help!
scripts:
Environment env = Environment::createEnvironment(Environment::OBJECT);
Connection conn = env->createConnection("billing", "billing", "boss");
MetaData meta = conn->getMetaData("testdb", MetaData::PTYPE_DATABASE);
db_ver = meta.getString(MetaData::ATTR_VERSION);
cout << "database version: " << db_ver << endl;
sapI just patched client-side, not server-size. so I guess the returned value from MetaData::getString(MetaData::ATTR_VERSION) represents the server's version.
-
How do I get the details of runtime errors to display in errorPage.jsp???
how do I get the details of a JSP runtime error onto my errorPage.jsp?
Currently, I'm getting a NumberFormatException - but I can see no details.
I have to assume that I do not have the errorPage.jsp set up correctly to capture the details of an exception.
Can someone provide an example (e.g., regular.jsp and errorPage.jsp) that illustrate how this is done (i.e., showing the details - stacktrace, etc - of a runtime exception)?
Thanks for any help!
***my page directie for otherpages.jsp***
<%@ page language="java" errorPage="errorPage.jsp" %>
***my errorPage.jsp***
<%@ page language='java' contentType='text/html' %>
<%@ page isErrorPage="true" %>
<html>
<head>
<title> errorPage.jsp </title>
</head>
<body>
<h2>
Error Encountered:
</h2>
<%= exception.toString() %>
<h2>
details...
</h2>
<%= exception.getMessage() %>
</body>
</html>You need to create a stringwriter, wrap it in a printwriter, then print to the printwriter, then convert the stringwriter to a string.
Here's an example:
StringWriter sw = new java.io.StringWriter();
PrintWriter pw = new java.io.PrintWriter(sw);
e.printStackTrace(pw);
String strError = sw.toString();
I hope this works. I didn't test the above code. I don't think I'm leaving anything out, but it's been a while since I've done it. Either way, it should get you on the right track to get what you need.
Hope that helps.
Michael
Maybe you are looking for
-
Can't say I like the new iCal running on Lion. One feature that I can't seem to find is the mini month view. I did away with my paper calendar for viewing full months because of the mini month calendars on my Macs. Is that functionality gone? I've se
-
Performance: index vs. primary key
For reasons beyond my control, I have an Oracle database with no primary keys. Fields that would likely be primary keys, however, are indexed. Is there any reason to believe that database performance will improve if I do add primary keys? If yes, why
-
XY-Graph / Plot legend: How to detect changes in 2nd/3rd/4th ... legend position
Hello, I have an XY-Graph with 4 plots. How can I detect, for example, the color change of the second plot in the legend. The active plot, using a property node, is always plot 0. So I am not able to detect changes in the 2nd/3rd ... plot. Any ideas?
-
How connect rfc servers in a HA environment?
Hello folks We are setting up a HA installation consisting of a clustered DB/ASCS package and a bunch of non-HA dialog instances. Now my question is, how do you connect 3rd party applications like for example business connectors, kofax topcall (a fax
-
Page not found after call to API
Hi all, I have a portal formal that calls a PL/SQL procedure on submit. My procedure has the following lines. uid:= create_user (p_username, p_password, p_first_name, p_last_name); wwsec_api.add_user_to_list ( p_person_id => uid, p_to_group_id => p_g