R installation R not Found error
Hi Gurus,
I am trying to install R enterprise Server on Windows XP. I have checked the perquisites and set R_HOME before starting the install.
However when I run the install.bat it gives R not found error.
R_HOME environment variable is correctly set as set R_HOME from command line returns the correct path.
Please advice.
Thanks
Henry,
<tt>OREbase</tt> is just one of the packages that ORE needs. To complete the installation you will need to install the same way the following packages: <tt>OREeda_1.1.zip, OREgraphics_1.1.zip, OREstats_1.1.zip, ORExml_1.1.zip, ORE_1.1.zip</tt>. Additionally, you will need to install supporting packages from *"Oracle R Enterprise Client Supporting Packages for Windows Platform"*. It contains the following three packages: <tt>DBI_0.2-5.zip, png_0.1-4.zip, ROracle_1.1-2.zip</tt> under <tt>bin</tt> sub-directory.
Then you can run ORE. Before issuing <tt>ore.connect()</tt> you should load ORE by doing <tt>library(ORE)</tt>. For the database that is running locally you can do something like this:
library(ORE)
ore.connect("scott", password = "tiger", conn_string = "")
ore.sync()
ore.attach()
ore.ls()If you have any tables or views in your schema <tt>ore.ls()</tt> will show them.
Denis
Similar Messages
-
Page Not Found Error after Installation
I just installed coldfusion 7. For some reason the flash
remoting did not get installed or enabled. Everything appears to
say it installs by default. Go to
http://localhost/flashservices/gateway.
I get a page not found error and it shoots to
http://localhost/flashservices/.
Did I miss a step somewhere?
I installed on a Windows XP box with IIS under the
C:\Inetpub\wwwroot. Is there something I can check or do? I am
pulling my hair out over this. Please help.
Thanks in advance.Better use BASIC installation type. If you go for advance installation you have to very carefull selecting all the key parameters. Are you looking for more specific ?? then can you please tell us the purpose of choosing advance installation type.
Regards
Rajesh -
File Not Found Error on Fresh MX7 Installation
After spending days getting CFMX 7.0.2 installed on a CentOS5.3 (production) server running Apache 2.2.3 and WHM/cPanel 11, by religiously following Bill Mitchell's lifesaving guide, CF is up and running but I cannot access the administrator or anything else in user public_html directories.
If I place a simple foo bar test file in the /usr/local/apache/htdocs/testfile.cfm directory, I can call it at http://[IPaddress]/testfile.cfm and it parses properly.
However, if I place the same file at /home/cfusion/public_html/testfile.cfm and call it at http://[IPaddress]/~cfusion/testfile.cfm, I get a CF-generated 404 "File Not Found" error.
cfusion is a cPanel account I created via WHM prior to installing ColdFusion as a repository for my CFIDE directory.
If I place a symlink for /usr/local/apache/htdocs/CFIDE -> /home/cfusion/public_html/CFIDE:"File Not Found". If I cp -R my CFIDE into htdocs: "File Not Found." These files are physically there. I can easily verify that of course. But CF is still saying File Not Found. In fact, if I disconnect Apache - JRun, Apache finds the files all by itself no problem. They are definitely there.
I thought this might be a permissions issue, but all my .cfm files are nobody:root 775.
Here's what I'm seeing in the exception.log:
coldfusion.runtime.TemplateNotFoundException: File not found: /~cfusion/filetest.cfm
at coldfusion.filter.PathFilter.invoke(PathFilter.java:83)
at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:69)
at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:115)
at coldfusion.CfmServlet.service(CfmServlet.java:107)
at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:541)
at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:318)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:426)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:264)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
I guess maybe I need to know where the config for webroots is set from the CF/JRun perspective? I'm a decent hand with web server admin stuff, but despite being a CF dev for 10 years, CF admin stuff is still a bit over my head. Any help would be GREATLY appreciated. I'm at my wit's end!Thanks Mack. I set verbose to true in my httpd.conf, restarted Apache, restarted CF, but I can't see any difference in the logging. Errors seem the same, and no additional info.
The Apache error_log file is filled with cryptic stuff that looks like it's referencing JRun. Does any of this mean anything to you? Is there another log file I should be looking at?
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] filtering / (/usr/local/apache/htdocs/) HOST=null
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] filterRequest: no match
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_service: r is 0x9d1aa98, server is 0x99df290, virtual 1
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_service: no handler, return DECLINED
[Thu Aug 06 01:10:01 2009] [notice] jrApache[8548: 18910] jrun_trans: r is 0x9d169d8, server is 0x99df290, virtual 1
[Thu Aug 06 01:10:01 2009] [notice] jrApache[8548: 18910] HOST: <null>
[Thu Aug 06 01:10:01 2009] [notice] jrApache[8548: 18910] filtering /whm-server-status (/usr/local/apache/htdocs/whm-server-status) HOST=null
[Thu Aug 06 01:10:01 2009] [notice] jrApache[8548: 18910] filterRequest: no match
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_trans: r is 0x9e5b930, server is 0x99df290, virtual 1
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] HOST: <null>
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] filtering / (/usr/local/apache/htdocs/) HOST=null
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] filterRequest: no match
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_service: r is 0x9e5b930, server is 0x99df290, virtual 1
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_service: no handler, return DECLINED
[Thu Aug 06 00:15:01 2009] [notice] jrApache[8519: 59314] jrun_trans: r is 0x9f96cc8, server is 0x99df290, virtual 1
[Thu Aug 06 00:15:01 2009] [notice] jrApache[8519: 59314] HOST: <null>
[Thu Aug 06 00:15:01 2009] [notice] jrApache[8519: 59314] filtering /whm-server-status (/usr/local/apache/htdocs/whm-server-status) HOST=null
[Thu Aug 06 00:15:01 2009] [notice] jrApache[8519: 59314] filterRequest: no match -
I am working with VB6 on an application involving a PCI-6711 Analog output card. I now am in the phase of working on the install file. I have developed this application on an XP machine, and i am trying to install it on a Windows 2000 machine, but i get a "nidaq32.dll file not found" error when i try to run my program on the 2000 machine. I have looked in the System32 folder and nidaq32.dll is in fact in the folder. I am wondering if my install file (created using INNO installer) didn't register the file correctly, of if it has to do with the driver i am using on the PC. I have NIDAQ 6.9.3 installed on the 2000 machine and NIDAQ 7.2 installed on my XP machine.
Any help would be appreciated.
Thanks,
GerryHello GVanhorn,
The problem seems to be that you have different drivers in the systems. You might want to use the same version of the driver in both machine since that will install the same version of the nidaq32.dll. -
FILE NOT FOUND ERROR WHILE INSTALLING ORACLE EM GRID CONTROL 10.2.0.1
FILE NOT FOUND ERROR ON FILES: generalstup, seedstup during the setup phase and when i click ignore from a list of cancel, retry and ignore it moves to the configuration phase and rapidly moves from 63% to 100% and gives the error OUI-10133 invalid staging area. i have tried the install 3 times and dont know what the problem is. i am doing the oracle EM GC INSTALL WITH NEW DATABASE OPTION. i downloaded the full version disks 1-3 from the website:http://www.oracle.com/technology/software/products/oem/index.html
Enterprise Manager 10g Grid Control Release 2 (v10.2.x)
Full Installers (Agent, Repository, OMS, and Management Packs)
Oracle Enterprise Manager 10g Grid Control Release 2 (10.2.0.1) for Linux x86
when this is extracted it leaves me with Disk1, 2, and 3
install started from 1, then it later asks for two whick happens to instead be but under Dist 3-but there are two disk2's under Disk 3- one under oms and one under rdbms folder. i have tried both and alas same errors
i even triwd the same download from edelivery.oracle.com and gives the same madness
am stuck.i followed the link and all the instructions things seemed to go well: it still asked for two files i did not have or could not locate: first its asked for generalstub, then it asked for seedstup and then generalstup again. at this point the installation was at 67% and had passed the link succesful stage and was at the setup succeful stage. when i clicked ignore on generalstub, seedstup and then generalstup again it quicly moved to 100% and never took me to the stage for me to run oraInstroot.sh and allroot.sh
the configuration assistant stage never cameup and it skipped to the page Specify Repository Database Configuration
where it asked for repository database hostname port, service/sid and SYSMAN password and also manament service security password. whe i input all the infor mation it will give errors. i have tries deleting all oracle 3 or 4 times and all files that oracle has and repeated the process and am always stuck here.
error reads :
-error cheching the existence of the SYSMAN user in Management repository
-exception occured while connecting to database . please check the connection details you specified and retry
-io exception connection refused: (DESCRIPTION=(TMP=)(VSNUMM=168821760)(ERR=12514)(ERRO_STACK=(ERROR=(CODE=12514)(EMFI=4))))
REP DB HOSTNAME:SA-OMS-01
PORT:1521
SERVICE/SID:OMSDB01
SYSMAN PASSWORD:PASS
THE REST I PUT PASS AS PASSWORD
NOT SURE WHAT TO DO NEXT. -
Ok so I went to update my itunes 9 to itunes 10.5 and now I get and error message "Apple application support was not found" error 2 (windows error 2) when ever I try to run itunes and iv been trying to fix this for like a month and let me tell you iTunes for windows is **** and I really want Icloud for my iphone 4 and yes iv tried uninstalling everything by apple in the correct order and reinstalling them after restart atleast honestly 20 - 30 times but nothing worked so if anyone can please help me I have windows 7 and a hp intel pentium computer
Install 7-Zip (free), or a free trial of WinRAR, and use one of them to extract the contents of the iTunesSetup.exe or iTunesSetup64.exe installer file, then try installing AppleApplicationSupport.msi as a standalone component. Even if it won't install you may get a more useful error message as to why not.
tt2 -
HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590
Have had HP Officejet Pro L7590 All-In-One Printer for years. Always worked fine and I had no issues printing via wireless connection. Several months ago.. Possibly after a Windows 8 update. From Windows 8 to Windows 8.1 I have not been able to use the printers wireless feature. When I try to print or scan it shows the printer as offline. Also get an error message that tells me "HP Imaging device is not found". I can still print when connected to USB. Cannot scan or use features of the HP software suite. I have tried several times to correct. Reloading the software and drivers several times, but no success. I just tried again and was able to print the test page wireless, so got all excited and thought I fixed it. Then tried to print something and got the same error message I have seen in the past. I have talked to certain supports saying that it may be a firewall setting within Windows. Any other suggestions? Thanks
Hi @rfjones002,
Welcome to the HP Support Forums! I see you are not able to print or scan wirelessly to your HP Officejet L7590 and your computer running the Windows 8.1 Operating system. You get a 'Printer offline' or 'HP Imaging device not found' errors.
I would like you to start with the steps listed below:
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstall the Printer Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /unregister
and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /regserver
and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
- Image source
Now you can go ahead and download and install the software here >
HP Officejet Pro Full Feature Software and Driver
If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
I am trying to install itunes on my computer (Windows Vista). After initial instillation I got an error 42404 A required itunes componenet is not installed; please repair or re-intall itunes and error 50, cannot access itunes store at this time. Please try later. I have done that multiple times; uninstalled all components, reinstalled all components, repaired all components, restarted my computer. I have changed firewall settings to allow acess to all of the apple components. I have made sure the required ports are open. All of the components are showing on the installed programs section of my control panel.
I am now getting an error message that says that Apple Support Application is not found error 2 (windows 5). It is listed in the installed programs and I have repaired it.
I am out of options. And help would be appreciated.'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.
Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me. -
so im trying to reinstall my itunes and there is a message saying that the dll to finish the installation is not found. so i need to contact the support. can anybody help me with this problem please.
Hi Dimas Muchammad,
Thanks for visiting Apple Support Communities.
If you are installing iTunes 11.1.4 on Windows and receiving an error during installation, the specific troubleshooting steps in this article can help:
iTunes 11.1.4 for Windows: Unable to install or open
All the best,
Jeremy -
404 Not Found Error while testing INTEGRATION_DIRECTORY_HMI
Hi,
I am installing XI 3.0 SR1 on Win2000 sp4. I got struck at page 40 of installation guide trying to configure rfc destination INTEGRATION_DIRECTORY_HMI. I gave all the parameters as specified in the guide and clicked on "Test". I am getting the 404 Not Found error. The detalied error log is attached below. Can some one please let me know what could be the reason for the error?
Thanks
Sireesha
HEADER NAME HEADER VALUE
~response_line HTTP/1.1 404 Not Found
~server_protocol HTTP/1.1
~status_code 404
~status_reason Not Found
connection close
pragma no-cache
cache-control no-cache
expires 0
content-type text/html
content-length 1539
server SAP J2EE Engine/6.40
date Fri, 03 Feb 2006 04:00:56 GMT
HTTP BODY
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html>
<head> <title>Error Report</title> <style> td {font-family : Arial,
Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active </style
> </head> <body marginwidth="0" marginheight="0" leftmargin="0" topmar
gin="0" rightmargin="0"> <table width="100%" cellspacing="0" cellpaddin
g="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF">
<td align="left" colspan="2" height="48"><font face="Arial, Verdana, Hel
vetica" size="4" color="#666666"><b> 404   Not Found</b><
/font></td> </tr> <tr bgcolor="#3F73A3"> <td height="23" width="8
4"><img width=1 height=1 border=0 alt=""></td> <td height="23"><img
width=1 height=1 border=0 alt=""></td> <td align="right" height="2
3"><font face="Arial, Verdana, Helvetica" size="2" color="#FFFFFF"><b>SA
P J2EE Engine/6.40 </b></font></td> </tr> <tr bgcolor="#9DCDFD">
<td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></
td> </tr> </table> <br><br><br><br><br><br> <p><font face="Arial, Ve
rdana, Helvetica" size="3" color="#000000"><b> The requested
resource does not exist.</b></font></p> <p><font face="Arial, Verdana,
Helvetica" size="2" color="#000000"><table><tr><td valign="top"><b> 
;Details:</b></td><td valign="top"><PRE>Go to <A HREF="/" target="_paren
t">main page</A> of this application!</PRE></font></td></tr></table></fo
nt></p> </body> </html>
Time (ms) 134Hi Sireesha -
>>>As per your suggestion. I am trying to reinstall the XI Component again. But the setup is not asking me for any uninstallation of the existing setup nor any message saying that you already have the XI Component installed. Does it mean that the XI Component got deleted automatically?
It's hard for me to say not being able to see your system, but here are some things you can check:
- check link http://<xi_host>:<j2ee_port>/sap/monitoring/ComponentInfo
You should be able to see components like SAP_XITOOL, SAP_XIAF, SAP_XIAFC which would indicate that XI components are installed. You need role SAP_J2EE_ADMIN to access this.
- Using SDM, you can see what's currently deployed in the SDM repository for XI related components.
- Using Visual Admin, you can look for XI related services within the Server instance.
But in any case, try reinstalling the XI Java components (which is really what you're installing following the SR1 Installation Guide). If you run into problems during the installation and it's possibly due to already existing XI components, I would recommend, cleaning the slate and uninstalling the J2EE Add-in and starting again from the J2EE add-in part. Instructions for deleting the add-in are in the corresponding WebAS Java 6.40 <platform/db> install guide (in the last section - "Additional Information").
Regarding the central adapter engine, yes, this is installed automatically when you do the main installation of the XI Java components. Instructions in the SR1 guide specifically referring to the Adapter Engine are for a decentral adapter engine.
Hope that helps.
Best regards,
Jin -
Query string read as part of file name, throwing not found errors
Hi all, I host a number of Web sites under a CF7 installation, Win2003.
One site in particular is throwing not-found errors in response to certain search bot requests.
In the IIS log, I noticed that for these requests, the query part of the URL is part of cs-uri-stem field value, but is not in the cs-uri-query field where it belongs:
cs-uri-stem= /index.cfm?template=24hour5.cfm
cs-uri-query=<blank>
instead of
cs-uri-stem= /index.cfm
cs-uri-query=template=24hour5.cfm
Evidently something somewhere is interpreting the entire URL as a filename, instead of a file name and a query string. When CF tries to locate the file it is throwing a not-found error.
Maybe there is something weird about the question mark, but it looks normal to me.
I can't seem to stop this error, since it is occuring at the OS, IIS, CF or jrun layer. Does anyone have any idea what is going on here, and what I can do about it?
Thanks in advance.
JoeHey Reed, thanks for responding.
I have a Cf utility that parses logs, so I modifed it to print out the ASCII codes for each character. They look normal, as far as I can tell. The question mark has a code of 63 which is correct, and no non-alphabetic characters precede or follow.
One interesting thing is that the stem being called is an index.cfm file, and the query string argument happens to be a template name, and it ends in .cfm. That's why it is making it all the way to CF, which chokes on it, instead of IIS logging a 404 error.
Often an identifiable bot is requesting these bad URLs, though I have spotted another request with agent 'Mozilla/4.0.' I suspect that is some kind of automated scan. (I also see other requests with the same agent name, though a different IP, that look like errononeously URL-encoded requests. These get filtered by URLScan.)
I don't know for sure is whether the specific clients that make these bad calls always make them them wrong way. They appear to. Most clients that access the site do so normally.
I wonder if there could be something in the request header, perhaps that instructs IIS to expect a different charset than what is actually used, or something like that. -
WLS 7 SSL class not found error
Actually, I got the same error message to start the Node Manager. However, I don't
have the RSA license at this moment. How can it make the WL to use com.certicom.net.ssl.CerticomContextWrapper
instead of com.rsa.ssl.WeblogicContextWrapper?
Thanks,
Victor
"Pavel Smelkov" <[email protected]> wrote:
It looks like ClassNotFoundException happend when WLS tried to initialize
SSL implementation class, which is
com.certicom.net.ssl.CerticomContextWrapper by default, or
com.rsa.ssl.WeblogicContextWrapper if you have an RSA license. Since
Certicom classes are shipped in weblogic.jar, you must have RSA license,
but
no RSA SSL classes in the server classpath?
Pavel.
"Jeff Davis" <[email protected]> wrote in message
news:[email protected]...
I'm having difficulty configuring the SSL port to listen to httpsrequests. The error
that I always receive (regardless of which sample I maybe running,from
the server
samples to the portal ones) is similar to the following (notice the"Not
listening
for SSL, java.net.SocketException: Class not Found" error):
**** START OF CONSOLE LOG **** <Jul 1, 2002 5:07:21 PM PDT> <Notice><Management>
<141052> app tag removed <!--- Application Poller started for developmentserver.>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ After the server hasbooted, your
browser should automatically launch and point to the WebLogic ServerIndex
running
on this server. If your browser fails to launch, point your browserto the
URL "http://JDavis-m1:7001/examplesWebApp/index.jsp"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ <Jul 1, 2002 5:07:22PM
PDT> <Emergency>
<Security> <090034> <Not listening for SSL, java.net.SocketException:Class not Found.>
<Jul 1, 2002 5:07:23 PM PDT> <Notice> <WebLogicServer> <000354> <Thread"ListenT
hread.Default" listening on port 7001> <Jul 1, 2002 5:07:23 PM PDT><Notice> <Management>
<141030> <Starting discovery of Managed Server... This feature is onby
default,
you may turn this off by pas sing -Dweblogic.management.discover=false><Jul 1, 2002
5:07:23 PM PDT> <Notice> <WebLogicServer> <000331> <Started WebLogic
Admin Server
"examplesServer" for domain "examples" running in Development Mod e><Jul
1, 2002
5:07:23 PM PDT> <Notice> <WebLogicServer> <000365> <Server state changed
to RUNNING>
<Jul 1, 2002 5:07:23 PM PDT> <Notice> <WebLogicServer> <000360> <Serverstarted in
RUNNING mode>
**** END OF CONSOLE LOG **** I haven't made any changes to the SSLsetup,
other than
simply indicating I want it active (if that choice is not already active)
I am just seeking to get the SSL using the test/demo certificate tofunction so that
I can complete a demo of the commerce product to a client (requiresport
7502 to
function)
Thanks!
Jeff Davis
</textarea> <br>
<input type=submit name="action" value="Post" >
</font></td></tr></table>
</form>
<hr>
</FONT>
<!-- ** COPY CONTENT INTO THIS SECTION HERE ** -->
</TD>
</TR>
</TABLE>
<!--start footer include -->
<table width="720" border="0" cellspacing="0" cellpadding="0">
<tr bgcolor="#CCCCCC">
<td><img name="news_r06_c01" src="/images/shim.gif" width="1" height="1" border="0"></td>
</tr>
<tr>
<td nowrap>
<div align="left"><img name="news_r17_c01" src="/images/footer1.gif" width="467"
height="18" border="0"><img name="news_r17_c31" src="/images/footer2.gif" width="200"
height="18" border="0" usemap="#news_r17_c31Map"><MAP name="news_r17_c31Map"><AREA
shape="rect" coords="139,2,167,18" href="http://www.bea.com/privacy.html"><AREA
shape="rect" coords="80,3,127,16" href="mailto:[email protected]"><AREA shape="rect"
coords="11,4,73,16" href="http://www.bea.com/contact/index.html"></MAP></div>
</td>
</tr>
</table>
<!--end footer include -->
</BODY>
</HTML>
</body></html>Thanks for your responce ...
I had discovered that when I typed "java program name" the java was running from /usr/bin a non-ssl enabled java installation. There was an SSL enabled version under another path on this box and it ran my code fine. -
action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can I do? Thanks
Hi, Please try to download the installer from the links provided in the following page: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
Thanks,
Sunil -
Re-installing itunes Error message Apple application software not found error 2
I am re-installing Itunes on my home computer at itunes request.
I am getting an error mesage that apple applicatin software not found Error 2With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.)
Maybe you are looking for
-
Hello i dropped my ipod in the toilet (clean water). Once i took it out of the toilet i pressed the home button and within a second it shut off! :( I quickly dried it with a towel and accidently pressed the top button! D: and put it immediatly into
-
Please give me the name of the connector for the laptop. Is it a "display port"?
-
Can a pdf file be projected from my macbook pro
Is it possible to project a PDF file onto a screen from my Macbook Pro?
-
I have Google as my default home page in Firefox and the Google browser opens when I start Firefox, but every time I open a new tab it opens the Yahoo browser.
-
Still having problems opening PDFs in Firefox
I have the latest version of Firefox (15.0.1) on my mac, and even though I have followed the instructions for updating the preferences to use Adobe Acrobat to open my pdfs, I am still having troubles with getting only a blank page when I try to open