RABAX state error on Decision Table

I'v receive this message when i try to create a DT.
An exception in the Formula & Derivation Tool occurred because of content errors
Afbrekingssoort: RABAX_STATE
ABAP-oproephiërarchie:
Method: CONVERT_DB_STRING_TO_TIMEPOINT of program CL_FDT_DATE_TIME==============CP
Method: CHECK_ of program CL_FDT_CONSTANT===============CP
Method: CHECK of program CL_FDT_CONSTANT===============CP
Method: IF_FDT_TRANSACTION~CHECK of program CL_FDT_MAINTENANCE============CP
Method: IF_FDT_TRANSACTION~CHECK of program CL_FDT_MAINTENANCE============CP
Method: IF_FDT_TRANSACTION~CHECK of program CL_FDT_MAINTENANCE============CP
Method: DISPLAY_MESSAGES of program /1BCWDY/7303W0RX67HZTJLLL28V==CP
Method: IWCI_FDT_WD_CHECK_MSG_LIST~DISPLAY_MESSAGES of program /1BCWDY/7303W0RX67HZTJLLL28V==CP
Method: CHECK of program /1BCWDY/7303R6YQRS4ZMK10IIYR==CP
Method: IF_ACTION~CHECK of program /1BCWDY/7303R6YQRS4ZMK10IIYR==CP
I'v created a function, END_GE_BEGIN, to compare two dates with the result as boolean. This function is activated.
Then i create a decision table, END_IS_VALID with the result of type boolean. Two columns, END_GE_BEGIN and END (date field).
First row in decision table END is initial and the the boolean is true.
Second row END_GE_BEGIN if true boolean is true.
On the check or the activate i receive this error. Multiple times.
It looks like that the error is triggered by the check END (date type) is initial.
How can i check if a date is initial?

I have the exact same error.
Could you please update this thread with solution and eventual OSS note?
Also Carsten: Do you have a release date for Netweaver 7 EHP2? Should be out by now but can't find any confirmation on that.
Thanks a lot!
Martin Jonsson

Similar Messages

Error in Decision Table using Analytic View

Dear experts,
I am trying to create a Decision table on an Analytic view. As per the HANA document guidelines, the Analytic view has one Calc. Attribute, the Action is created from a Parameter and Conditions are created from Analytic View column.
But no luck while activationg the Decision Table and facing below errors. Has anybody gone through such scenario. Please suggest if I am missing something.
Message :
XML Parser error: ; Decision Table XML Parser Error: attribute 'ce-id-refs' of element 'av' is missing
XML Parser error: ; Decision Table XML Parser Error: actionVal is NULL
XML Parser error: ; Decision Table XML Parser Error: actionNode is NULL
HANA Version is 1.0 SPS8 Rev80
Thanks in advance,
~Papil

Hi,
I have resolved this issue by performing following steps.
1. Exported Decision Table Data into XL.
2. Removed the action variable.
3. Added again the same parameters as Action
4. Imported XL file of Decision table.
5. Validated and Activated. It worked.
regards,
Shweta

TABLE ILLEGAL STATEMENT error with MODIFY command

Hi gurus,
i want you to inform me about table illegal statement error. The error occurs when i use modify as below.
loop at itab.
   select .......
         where xxx eq itab-xxxx.
       MODIFY itab.
endselect.
endloop.
i know that i have to give the sy-tabix as INDEX parameter to the modify command. but i want to know why i have to do this?
cause when i debug, i follow the sy-tabix field and it have not a change in select endselect.
may the reason of the error about cursor in select and cursor effects modify command?
or why?
Thx,

Hello,
I guess this is because your MODIFY statement is inside the SELECT ... ENDSELECT & not inside the LOOP ... ENDLOOP.
SAP documentation says:
Within a LOOP loop, the INDEX addition can be ommitted. In this case the current table line of the LOOP loop is changed.
You have to change the coding:
DATA: v_index TYPE i.
loop at itab.
v_index = sy-index.
select .......
where xxx eq itab-xxxx.
MODIFY itab INDEX v_index.
endselect.
endloop.
BR,
Suhas
PS: The coding practice followed is not very performance oriented as well. May be you should have a look around in some blogs, wikis in SCN & change the code accordingly.
Edited by: Suhas Saha on Nov 19, 2009 9:41 AM

Error when creating decision table

Hi,
I am on a Netweaver 7.0 EHP2 SP 6.
Using the BRF+ Workbench I created two applications and some other objects, but when trying to create a decision table in one of the applications I am getting a shortdump after confirming the popup where you can enter the name of the decision table. It works fine in the other appliation though.
The error message is
Runtime Error: CREATE_DATA_UNKNOWN_TYPE
The specified type FDT_EXPR_0247a is no valid data type.
Termination occured in the ABAP program "CL_FDT_PERSISTENCE=================CP" - in "IF_FDT_PERSISTENCE~WRITE"
And of course more. I just wanted to ask if this is a known error, since I only used the Workbench, and didnt change anything standard.
Regards,
Peter Büermann

Table should be there. I do not understand why this is not the case in your system. Have there been any problems in the upgrade?
Two options.
1. Create a message for SAP to look at this.
2. Maybe implement SP7. You may be lucky and the table is in it.

ERROR ORA-00942: table or view does not exist

Hi:
I created a .sql file and a loader file. Running the .sql file with sql * plus Worksheet:
declare
gr sdo_georaster;
begin
select image into gr from gis.RasterImages where geoid=1 for update;
sdo_geor.generatePyramid(gr,'resampling=NN');
update gis.RasterImages set image=gr where geoid=1;
commit;
end;
I trying to create a pyramid,but the error appeared:
ERROR at line 1:
ORA-29400: DATA CONTROL ERROR ORA-00942: table or view does not exist
ORA-06512: 在 "MDSYS.SDO_GEOR_INT", line 162
ORA-06512: 在 "MDSYS.SDO_GEOR", line 826
ORA-06512: 在 line 5
I don't know why?
Anyone can help me?
Thanks.

Hi,
I think you are executing the select statement for schema X and the table is in the schema srnr.
And schema X is not having select privilege on the table 'students' present in schema srnr.
Goto schema srnr.
Execute the following statement:
grant select on students to X;
This will give schema X the privilege to query the table students present in srnr.
Regards,
Anupama

I am getting "ORA-00900: invalid SQL statement" error.?

I did installed oracle 11gR2. and used "DBMS_METADATA_DIFF.COMPARE_ALTER('TABLE','TBL_A','TBL_A','USER1','USER2')"   to see the result like below, but I am getting "ORA-00900: invalid SQL statement" error.   Any idea?
I am using:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL> desc user1.tbl_a
Name                                      Null?    Type
FIELD_A1                                  NOT NULL NUMBER
FIELD_A2                                           VARCHAR2(20)
FIELD_A4                                  NOT NULL NUMBER(5,2)
FIELD_A5                                           VARCHAR2(10)
FIELD_A6                                  NOT NULL NUMBER(2)
SQL> desc user2.tbl_a
Name                                      Null?    Type
FIELD_A1                                  NOT NULL NUMBER
FIELD_A2                                           VARCHAR2(50)
FIELD_A3                                           DATE
FIELD_A4                                           NUMBER(5,2)
FIELD_A5                                  NOT NULL VARCHAR2(10)
SQL> select dbms_metadata_diff.compare_alter('TABLE','TBL_A','TBL_A','USER1','USER2') from dual
expected result:
DBMS_METADATA_DIFF.COMPARE_ALTER('TABLE','TBL_A','TBL_A','U1','U2')
ALTER TABLE "U1"."TBL_A" ADD ("FIELD_A3" DATE)
ALTER TABLE "U1"."TBL_A" DROP ("FIELD_A6")
ALTER TABLE "U1"."TBL_A" MODIFY ("FIELD_A2" VARCHAR2(50))
ALTER TABLE "U1"."TBL_A" MODIFY ("FIELD_A4" NUMBER(5,2) DEFAULT 0)
ALTER TABLE "U1"."TBL_A" MODIFY ("FIELD_A4" NULL)
ALTER TABLE "U1"."TBL_A" MODIFY ("FIELD_A5" NOT NULL ENABLE)

Thanks for reply rp,
I got result using "select dbms_metadata_diff.compare_alter('TABLE','TBL_A','TBL_A','USER1','USER2') from dual"

ORA-00900: invalid SQL statement Error while Executing Procedure

Hi:
I am trying to execute following procedure through java code, but i am getting ORA-00900: invalid SQL statement error.
Procedure is :
<code>
(vResult out int)
as
vCardId varchar2(16);
vForacid varchar2(16);
vApp_Entry_No varchar2(10);
vSrNo number(6);
vCardStatus char(1);
vCardStat char(2);
vExpiryDate date;
Cursor cardCur1 is
select u.card_number,trim(u.ACCOUNT_NUMBER),u.CARD_STATUS,to_char(u.EXPIRY_DATE,'dd-MM-yyyy')
FROM DailyCardData u
where default_indicator='1'
and isprocessed = 'N'
order by expiry_date;
begin
vSrNo := 0;
vResult := 0;
open cardCur1;
Loop
fetch cardCur1 into vCardId,vForacid,vCardStat,vExpiryDate;
if cardCur1%NOTFOUND then
exit;
end if;
if (vCardStat != null) then
vCardStatus := 'H';
elsif (vExpiryDate <= sysdate) then
vCardStatus := 'E';
else
vCardStatus := null;
end if;
select a.app_entry_no into vApp_Entry_No from Application a,ApplicationLinkedAccounts l
where l.foracid = vForacid and l.AcSrNo = '1'
and a.app_entry_no = l.app_entry_no
and a.cardid is null
and a.DOWNLOADFILECREATIONFLAG = 'Y';
update Application set CardId = vCardId,
Card_Status = vCardStatus,APPLICATIONPROCESSEDFLAG = 'Y',
APPLICATIONPROCESSEDdate = DOWNLOADFILECREATIONdate
where App_Entry_No = vApp_Entry_No;
commit;
update DailyCardData set isprocessed = 'Y',app_entry_no = vApp_Entry_No
where card_number = vCardId;
commit;
end Loop;
close cardCur1;
vResult := 1;
end;
</code>
Can any body help me in that?
Thank You,
Anup

First of all I don't see a procedure header.
Secondly I see you commit inside your procedure. This is a bug.
Thirdly I see you also commit inside a loop. This is also a bug, and needs to be removed asap.
The error indicates a statement doesn't parse. As you don't post the error stack, nor a table definition no one can reproduce the problem.
You need to isolate the statements, one by one, and run them through sql*plus to see what happens.
Sybrand Bakker
Senior Oracle DBA

How to change data in decision table using excel file in operating system?

Hello, BRF Experts
I now brf + for the first time in the current project is being developed.
Now, project has been facing a big problem.
Develop system that was developed in the history of decision table in the operating system can be used to update excel file, etc. I do not know whether.
So, I was tested, but can not change data in decision table.
[ error message : system is not change allowed ].
The operating system itself to the current system setting is immutable and check it
: changes and transports for client-specific object -> no changed allowed
: cross-client object changes -> no changes to repository and cross-client customizing object.
Decision table in the operating system can update the details if I want to know what to do.
Maintenance view can be modified in the operating system as a decision table, I wonder if you can create a view.
Edited by: Sung-Wook Ha on Jan 13, 2012 2:02 PM

Hi ,
Exchanging data with Microsoft Excel is done with the help of the XML-based file format (file extension .XSLX) introduced with Microsoft Excel 2007. If you are using an older version of Microsoft Office, you can download the Microsoft Office Compatibility Pack to upgrade the supported file formats from the Microsoft Download Center ([Exchanging Decision Table Data With Microsoft Excel |http://www.microsoft.com/downloads/details.aspx?familyid=941b3470-3ae9-4aee-8f43-c6bb74cd1466]). Once you have downloaded the Compatibility Pack, you have to install it on every workstation that has an older version of Microsoft Office installed.
Please refer the link-
[BRFplus-Data exchange with MS Office 2007|http://help.sap.com/erp2005_ehp_05/helpdata/en/b8/e03486d1df48c6baa3c4354f5198ee/frameset.htm]
Hope this helps.
Thanks,
Ajay

Issue Using Boolean Attribute in Decision Tables Conditions

I'm using Oracle BPM Suite 11g 11.1.1.4.0 for my application. In my business rules, I need to use the nillable boolean attribute in Decision Table conditions, so I import java.lang.Boolean class in the Java Facts, I append .booleanValue() to the condition. I validate the rule, it's ok. Then I deploy my application to server, when I test the my process, i encounter a error:
<bpelFault><faultType>0</faultType><operationErroredFault xmlns="http://xmlns.oracle.com/LoanApprovalRules/LoanApprovalRules_DecisionService_1"><part name="payload"><errorInfo xmlns="http://xmlns.oracle.com/LoanApprovalRules/LoanApprovalRules_DecisionService_1"><errorMessage>The class 'com.oracle.xmlns.bpm.bpmobject.data.loaninfoobject.LoanInfoObjectType' has no member named 'hasAssets'. at line 6 column 3 in main</errorMessage></errorInfo></part></operationErroredFault></bpelFault>
HasAssets is Bool type. If I remove java.lang.Boolean in Java Fact, and remove conditions of hasAssets, the process run perfectly.
Can you help me?
Thanks.

I'm using Oracle BPM Suite 11g 11.1.1.4.0 for my application. In my business rules, I need to use the nillable boolean attribute in Decision Table conditions, so I import java.lang.Boolean class in the Java Facts, I append .booleanValue() to the condition. I validate the rule, it's ok. Then I deploy my application to server, when I test the my process, i encounter a error:
<bpelFault><faultType>0</faultType><operationErroredFault xmlns="http://xmlns.oracle.com/LoanApprovalRules/LoanApprovalRules_DecisionService_1"><part name="payload"><errorInfo xmlns="http://xmlns.oracle.com/LoanApprovalRules/LoanApprovalRules_DecisionService_1"><errorMessage>The class 'com.oracle.xmlns.bpm.bpmobject.data.loaninfoobject.LoanInfoObjectType' has no member named 'hasAssets'. at line 6 column 3 in main</errorMessage></errorInfo></part></operationErroredFault></bpelFault>
HasAssets is Bool type. If I remove java.lang.Boolean in Java Fact, and remove conditions of hasAssets, the process run perfectly.
Can you help me?
Thanks.

QM UD Error Message: Check table XEKBN: entry 45039875220001003 does not exist.

Hello QM expert,
I encounter a error when I make a UD. (Please refer to below screenshot. )
Case 1: I did quantity post to unrestricted use, to scrap, to blocked stock, to new material, to reserves, return delivery. When I save this UD, there is a error message 'Check table XEKBN: entry 4503987522000100310100 does not exist.' (PS. 4503987522 is PO number, but I don't know what it is about 10031010.)
Case 2: I fill the same field like Case 1, but exclude to new material. It can be passed, no error message.
Case 3: I only fill one field [to new material. It can be passed, no error message.
Could you please give me some guidance? Thank you so much.
Best Regards,
Fanchao Bu

Hi Fanchao,
Form the inspection lot number range, I believe you are using GR form Purchase Order, right? Please confirm the below points -
1. Is this a normal PO or Sub-contractor's PO? Please confirm if this issue is happening for every stock posting like Unrestricted, Scrap, Blocked...? or just for one? Can you try one by one for example, move stock form QI => Unrestricted stock only (and do not combine all types together like the attached screenshot) and suggest if that is working.
2. If this is a non-valuated material you have used (NLAG) for testing? Are you trying to post materials for previous period? Storage Location SM10 is valid?
If still this issue exist, then potentially, there is some issue with valuation variant linked to valuation area, which is normally maintained in Configuration OPK9. Paralelly, you can request your ABAP team to check FM MB_UPDATE_VALUE_ENQUEUE_TABLE, Include LMBGBU04, as suggested by the below link -
SAP ABAP Function Module MB_UPDATE_VALUE_ENQUEUE_TABLE - SAP Datasheet - The Best Run SAP Run SAPDatasheet
You can also check SAP notes below, based on the business needs:
1. 403671 - Error M7001: 'Please check table &...'
    401462 - Error M7001: 'Please check table &...'
    201833 - M7001: 'Please check table XEKPO: Entry & &...'
    2072019 - Error M7001 raised during posting goods receipt
    407265 - Transfer parameter with BAPI BAPI_GOODSMVT_CANCEL (this may be linked to your return Delivery of 1 PC...)
    439945 - GR w/ freight costs for stock transport ordr w/ML currencies
    521090 - FAQ: Stock transfer to stock transport order
    867878 - Inconsistencies in the EKBE table because of conversions
    214814 - M7001/M7361: Table T156M, entry MAA7 2
    1584493 - Overdelivery check for GR blocked stock with GR-based IV
    102863 - GI f.delivery f.a stock transfer w.delivery costs
2. 409529 - Price differences during goods receipt for purchase order
3. 1528009 - MAA: incorrect distribution of goods receipt quantities
4. 1569831 - MAA2: Composite SAP Note after Support Package SAPKH60504
5. 406973 - M7001: Please check table XEBEFU: Entry does not exist
6. 70577 - QA11: Error M7001 when posting qty in usage decision (OLD NOTE, May not be applicable)
7. 824322 - QAC1: Incorrect batch in material document (Old Note, may no be applicable)
Else, you can speak to MM team and/or FI team to help you better in this case, as I feel there is no much QM issues involved.
Thanks,
Arijit

Using UNUSABLE on Unique Index gives "initially in unusable state" error

I am doing the following:
1. Truncate table
2 Alter PK Index Disable
2. Alter Unique Index Unusable
3. Insert /*+ APPEND NOLOGGING*/ into my table
My problem is, I get an "ORA-26026: unique index ... initially in unusable state" error when I try to do the Insert. If I make the Unique index non-unique it isn't a problem. If I drop the index and recreate it its not a problem - so uniqueness doesn't appear to be the issue. Can you not use UNUSABLE with a Unique index, I couldn't find any reference to this in the 10g docs.
I am using 10.1.0.4.
Thanks
Richard

26026, 0000, "unique index %s.%s initially in unusable state"
//* Cause: A unique index is in IU state (a unique index cannot have
//* index maintenance skipped via SKIP_UNUSABLE_INDEXES).
//* Action: Either rebuild the index or index partition, or use
//* SKIP_INDEX_MAINTENANCE if the client is SQL*Loader.

Business Rules Error when Decision Function surfaced as WebService in BPM

To use a BusinessRule as from a Business Rules activity,it needs to be surfaced as a WebService.
I've run into an issue where as soon as I check that box and save, the BusinessRule in question goes into a error mode when viewed from the BPM Project Manager (which is why this question is posted here).
The scenario is this:
My types are defiend in XSD. There is a SimpleType - FooStepTypeType - which is a retricted xs:string, the common way top create an enumeration. I import this as an XML fact, it creates a Enum bucketset, which is perfect. I create a decision function - DecisionFunction1 - which has an input parameter of this type and a boolean output. I set up a simple decision table to use the input and assert the output. The editor is happy.
At this point, I can't use the DF in my process, as it's not exposed a service, and won't be selectable via the the Properties/Implementation of a Business Rules activity.
A soon as I mark the DF as a WebService and save it, an the rule disappears from the Rules section of the Business Catalog and reappears at the root of the catalog in error. In some cases it can't be edited.
Hovering over the error file produced this error message:
The argument ‘step’ of decision function ‘DecisionFunction1’ could not build because of ‘BPM-71517: Unable to identify the parameter QName. Cause: ‘FooStepTypeType. Action: Make sure that the decision function parameter is of XML type and exactly one XML Schema Element exists that represents the parameter’.
My XSD previously did not contain a freestanding element of this type, but had elements defined in another complex type of this type. Adding a freestanding element didn't change anything. In fact it seems that elements are not avaialble to be imported as XMLFacts, only types.
At this point, if the Rules editor is still open, the DF can be "unserviced" and after saving may be recoverable with a JDev restart. If not, manually removing the DF from the .rules xml file can help recover the file so that it can be edited again.
SO: THE QUESTIONS.
Why can't I use a simpleType as an input parameter for a DF exposed as a WebService? What is BPM-71517 asking me to do exactly? I can't find any references to it via searching. Why does eveything seem fine until I expose it?
Addendum - using JDev 11.1.1.4.0 with BPM tools 11.1.1.4.0.5682
Addendum2 - upgraded to 11.1.1.5.0 and the problem is still there.....
TIA,
Bill
Edited by: wylderbeast on May 20, 2011 9:38 AM
Edited by: wylderbeast on May 20, 2011 10:09 AM
Edited by: wylderbeast on May 31, 2011 3:22 PM

Further invesitgation bears this problem out.
Oracle support recommend wrapping the SimpleType in a ComplexType. This does work, but now I have an extra wrapper element to deal with. I either have to use the wrapped type in my other complex, composed Types and/or add an external wrapping element when trying to create Business Services in BPM to call the BusinessRules I've created.
This is a bit messy.
To be clear, this does not seem to be an issue with Business Rules; the BR editor and generation of Facts (including simple restricted types -> JAXB 2.0/Java Enumerations) seems to work correctly. There seems to be an issue exposing DFs as Services. The code which generated the WSDL and its supporting types seems to choke on restricted SimpleTypes.
As a side note, it seems that HumanTasks have a similar limitation
Edited by: wylderbeast on May 31, 2011 3:27 PM

Error creating V_LINEAGE_HIERARCHY Table

While exporting OBIEE Meta data for OBIEE/ODI Lineage one might get the following error
oracle.odi.obilineage.lineage.util.MainBase] [SRC_METHOD: main] ODI-50036: Error creating V_LINEAGE_HIERARCHY Table. Check the logs.[[
oracle.odi.obilineage.lineage.util.CliException: ODI-50036: Error creating V_LINEAGE_HIERARCHY Table. Check the logs.
     at oracle.odi.obilineage.obi.lineage.cli.LineageMetadataConsolidator.execute(LineageMetadataConsolidator.java:201)
     at oracle.odi.obilineage.lineage.util.CommandLine.perform(CommandLine.java:49)
     at oracle.odi.obilineage.lineage.util.MainBase.main(MainBase.java:90)
A)
1. Login to DB with DBA access
2. grant create view to PREFIX_ODI_REPO used as master reposiotry
3. This would suffice in 11g as work repository is not a seperate user

From a different thread, Jose wrote:
V_INSERT:='INSERT INTO TMP_TABLE(field1,field3,field3,field4) VALUES (1,2,3,4)';
Forms_DDL(V_INSERT);
commit;First, try your statement in SQL Plus:
INSERT INTO TMP_TABLE(field1,field3,field3,field4) VALUES (1,2,3,4);
Then if that works, try doing this right after the Forms_DDL(V_INSERT);
If not form_success then
Message('   Insert has failed');
Raise form_trigger_failure;
Else
Forms_DDL('COMMIT');
End if;

Raising ora-01426 error while truncating table

Hi,
We have a procedure which executes in the following process for few set of tabls
1. disables the constraints
2. truncating the tables
3. enabling the constraints
but after processing for 5 tables, while truncating the error throws
BEGIN <procedure name >; END;
ERROR at line 1:
ORA-01426: numeric overflow
ORA-06512: at "<procedurename> ", line 33
ORA-06512: at line 1
this line 33 point to execute immeidate 'truncate table < table name>
Can i know what would be reason for throwing ' numeric overflow' error while truncating table..
Thanks in advance

user9080289 wrote:
thanks.
My oracle verision is 11gThen you could have the bug described there. Follow the instruction how to workaround (monitoring flush, set stats to low value) or apply the patch #8226471.
Nicolas.

SQL Statement error when running ETL from DAC

Dear all,
I installed and configured biapps 7.9.6.3, then I run the full load of Subject CRM - Loyalty in DAC. And I got the error of task fail, I check the Session log files in Informatica server.
$ view SEBL_VERT_811.DATAWAREHOUSE.SDE_SBL_Vert_811_Adaptor.SDE_GeographyDimension_Business.log
DIRECTOR> VAR_27028 Use override value [0] for user-defined workflow/worklet variable:[$$passInStatus].
DIRECTOR> VAR_27028 Use override value [DataWarehouse] for session parameter:[$DBConnection_OLAP].
DIRECTOR> VAR_27028 Use override value [SEBL_VERT_811] for session parameter:[$DBConnection_OLTP].
DIRECTOR> VAR_27028 Use override value [SEBL_VERT_811.DATAWAREHOUSE.SDE_SBL_Vert_811_Adaptor.SDE_GeographyDimension_Business.log] for session parameter:[$PMSessionLogFile].
DIRECTOR> VAR_27028 Use override value [1] for mapping parameter:[MPLT_LOAD_W_GEO_DS.$$DATASOURCE_NUM_ID].
DIRECTOR> VAR_27028 Use override value [] for mapping parameter:[$$Hint1].
DIRECTOR> VAR_27028 Use override value [] for mapping parameter:[$$Hint2].
DIRECTOR> TM_6014 Initializing session [SDE_GeographyDimension_Business] at [Mon Jul 25 17:29:47 2011].
DIRECTOR> TM_6683 Repository Name: [Oracle_BI_DW_Base]
DIRECTOR> TM_6684 Server Name: [Oracle_BI_DW_Server]
DIRECTOR> TM_6686 Folder: [SDE_SBL_Vert_811_Adaptor]
DIRECTOR> TM_6685 Workflow: [SDE_GeographyDimension_Business] Run Instance Name: [] Run Id: [260]
DIRECTOR> TM_6101 Mapping name: SDE_GeographyDimension_Business [version 1].
DIRECTOR> TM_6963 Pre 85 Timestamp Compatibility is Enabled
DIRECTOR> TM_6964 Date format for the Session is [MM/DD/YYYY HH24:MI:SS]
DIRECTOR> TM_6827 [u01/app/oracle/biapps/dev/Informatica/9.0.1/server/infa_shared/Storage] will be used as storage directory for session [SDE_GeographyDimension_Business].
DIRECTOR> CMN_1802 Session recovery cache initialization is complete.
DIRECTOR> TM_6708 Using configuration property [DisableDB2BulkMode,Yes]
DIRECTOR> TM_6708 Using configuration property [ServerPort,6325]
DIRECTOR> TM_6708 Using configuration property [overrideMpltVarWithMapVar,Yes]
DIRECTOR> TM_6708 Using configuration property [SiebelUnicodeDB,SIEBEL@ANSDEV dwhadmin@ANBDEV]
DIRECTOR> TM_6703 Session [SDE_GeographyDimension_Business] is run by 64-bit Integration Service [node01_hkhgc01dvapp01], version [9.0.1 HotFix2], build [1111].
MANAGER> PETL_24058 Running Partition Group [1].
MANAGER> PETL_24000 Parallel Pipeline Engine initializing.
MANAGER> PETL_24001 Parallel Pipeline Engine running.
MANAGER> PETL_24003 Initializing session run.
MAPPING> CMN_1569 Server Mode: [UNICODE]
MAPPING> CMN_1570 Server Code page: [UTF-8 encoding of Unicode]
MAPPING> TM_6151 The session sort order is [Binary].
MAPPING> TM_6185 Warning. Code page validation is disabled in this session.
MAPPING> TM_6156 Using low precision processing.
MAPPING> TM_6180 Deadlock retry logic will not be implemented.
MAPPING> TM_6187 Session target-based commit interval is [10000].
MAPPING> TM_6307 DTM error log disabled.
MAPPING> TE_7022 TShmWriter: Initialized
MAPPING> DBG_21075 Connecting to database [ANBDEV], user [dwhadmin]
MAPPING> CMN_1716 Lookup [MPLT_LOAD_W_GEO_DS.LKP_W_LST_OF_VAL_G] uses database connection [Relational:DataWarehouse] in code page [UTF-8 encoding of Unicode]
MAPPING> CMN_1716 Lookup [MPLT_LOAD_W_GEO_DS.LKP_W_GEO_DS] uses database connection [Relational:DataWarehouse] in code page [UTF-8 encoding of Unicode]
MAPPING> DBG_21694 AGG_COUNTRY_CITY_ZIPCODE Partition [0]: Index cache size = [1048576], Data cache size = [2097152]
MAPPING> TE_7212 Increasing [Index Cache] size for transformation [AGG_COUNTRY_CITY_ZIPCODE] from [1048576] to [2402304].
MAPPING> TE_7212 Increasing [Data Cache] size for transformation [AGG_COUNTRY_CITY_ZIPCODE] from [2097152] to [2097528].
MAPPING> TE_7029 Aggregate Information: Creating New Index and Data Files
MAPPING> TE_7034 Aggregate Information: Index file is [u01/app/oracle/biapps/dev/Informatica/9.0.1/server/infa_shared/Cache/PMAGG14527_3_0_260.idx]
MAPPING> TE_7035 Aggregate Information: Data file is [u01/app/oracle/biapps/dev/Informatica/9.0.1/server/infa_shared/Cache/PMAGG14527_3_0_260.dat]
MAPPING> TM_6007 DTM initialized successfully for session [SDE_GeographyDimension_Business]
DIRECTOR> PETL_24033 All DTM Connection Info: [<NONE>].
MANAGER> PETL_24004 Starting pre-session tasks. : (Mon Jul 25 17:29:47 2011)
MANAGER> PETL_24027 Pre-session task completed successfully. : (Mon Jul 25 17:29:47 2011)
DIRECTOR> PETL_24006 Starting data movement.
MAPPING> TM_6660 Total Buffer Pool size is 36000000 bytes and Block size is 128000 bytes.
LKPDP_2> DBG_21097 Lookup Transformation [MPLT_LOAD_W_GEO_DS.LKP_W_GEO_DS]: Default sql to create lookup cache: SELECT CITY,COUNTRY,ZIPCODE,STATE_PROV FROM W_GEO_DS ORDER BY CITY,COUNTRY,ZIPCODE,STATE_PROV
LKPDP_1> DBG_21312 Lookup Transformation [MPLT_LOAD_W_GEO_DS.LKP_W_LST_OF_VAL_G]: Lookup override sql to create cache: SELECT W_LST_OF_VAL_G.VAL AS VAL, W_LST_OF_VAL_G.R_TYPE AS R_TYPE FROM W_LST_OF_VAL_G
WHERE
     W_LST_OF_VAL_G.R_TYPE LIKE 'ETL%' ORDER BY R_TYPE,VAL
LKPDP_1> TE_7212 Increasing [Index Cache] size for transformation [MPLT_LOAD_W_GEO_DS.LKP_W_LST_OF_VAL_G] from [1048576] to [1050000].
LKPDP_2> TE_7212 Increasing [Index Cache] size for transformation [MPLT_LOAD_W_GEO_DS.LKP_W_GEO_DS] from [20000000] to [20006400].
LKPDP_2> TE_7212 Increasing [Data Cache] size for transformation [MPLT_LOAD_W_GEO_DS.LKP_W_GEO_DS] from [20000000] to [20004864].
READER_1_1_1> DBG_21438 Reader: Source is [ANSDEV], user [SIEBEL]
READER_1_1_1> BLKR_16051 Source database connection [SEBL_VERT_811] code page: [UTF-8 encoding of Unicode]
READER_1_1_1> BLKR_16003 Initialization completed successfully.
WRITER_1_*_1> WRT_8146 Writer: Target is database [ANBDEV], user [dwhadmin], bulk mode [ON]
WRITER_1_*_1> WRT_8106 Warning! Bulk Mode session - recovery is not guaranteed.
WRITER_1_*_1> WRT_8221 Target database connection [DataWarehouse] code page: [UTF-8 encoding of Unicode]
WRITER_1_*_1> WRT_8124 Target Table W_GEO_DS :SQL INSERT statement:
INSERT INTO W_GEO_DS(CITY,CONTINENT,COUNTRY,COUNTY,STATE_PROV,ZIPCODE,DATASOURCE_NUM_ID,X_CUSTOM) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?)
WRITER_1_*_1> WRT_8020 No column marked as primary key for table [W_GEO_DS]. UPDATEs Not Supported.
WRITER_1_*_1> WRT_8270 Target connection group #1 consists of target(s) [W_GEO_DS]
WRITER_1_*_1> WRT_8003 Writer initialization complete.
READER_1_1_1> BLKR_16007 Reader run started.
WRITER_1_*_1> WRT_8005 Writer run started.
WRITER_1_*_1> WRT_8158
*****START LOAD SESSION*****
Load Start Time: Mon Jul 25 17:29:47 2011
Target tables:
W_GEO_DS
READER_1_1_1> RR_4029 SQ Instance [SQ_S_ADDR_ORG] User specified SQL Query [SELECT DISTINCT
S_ADDR_ORG.CITY,
S_ADDR_ORG.COUNTRY,
S_ADDR_ORG.COUNTY,
S_ADDR_ORG.PROVINCE,
S_ADDR_ORG.STATE,
S_ADDR_ORG.ZIPCODE,
      '0' AS X_CUSTOM
FROM
V_ADDR_ORG S_ADDR_ORG
READER_1_1_1> RR_4049 SQL Query issued to database : (Mon Jul 25 17:29:47 2011)
READER_1_1_1> CMN_1761 Timestamp Event: [Mon Jul 25 17:29:47 2011]
READER_1_1_1> RR_4035 SQL Error [
ORA-00942: table or view does not exist
Database driver error...
Function Name : Execute
SQL Stmt : SELECT DISTINCT
S_ADDR_ORG.CITY,
S_ADDR_ORG.COUNTRY,
S_ADDR_ORG.COUNTY,
S_ADDR_ORG.PROVINCE,
S_ADDR_ORG.STATE,
S_ADDR_ORG.ZIPCODE,
'0' AS X_CUSTOM
FROM
V_ADDR_ORG S_ADDR_ORG
Oracle Fatal Error
Database driver error...
Function Name : Execute
SQL Stmt : SELECT DISTINCT
S_ADDR_ORG.CITY,
S_ADDR_ORG.COUNTRY,
S_ADDR_ORG.COUNTY,
S_ADDR_ORG.PROVINCE,
S_ADDR_ORG.STATE,
S_ADDR_ORG.ZIPCODE,
'0' AS X_CUSTOM
FROM
V_ADDR_ORG S_ADDR_ORG
Oracle Fatal Error].
READER_1_1_1> CMN_1761 Timestamp Event: [Mon Jul 25 17:29:47 2011]
READER_1_1_1> BLKR_16004 ERROR: Prepare failed.
WRITER_1_*_1> WRT_8333 Rolling back all the targets due to fatal session error.
WRITER_1_*_1> WRT_8325 Final rollback executed for the target [W_GEO_DS] at end of load
WRITER_1_*_1> WRT_8035 Load complete time: Mon Jul 25 17:29:47 2011
LOAD SUMMARY
============
WRT_8036 Target: W_GEO_DS (Instance Name: [W_GEO_DS])
WRT_8044 No data loaded for this target
WRITER_1__1> WRT_8043 ****END LOAD SESSION*****
MANAGER> PETL_24031
***** RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
Thread [READER_1_1_1] created for [the read stage] of partition point [SQ_S_ADDR_ORG] has completed. The total run time was insufficient for any meaningful statistics.
Thread [TRANSF_1_1_1] created for [the transformation stage] of partition point [SQ_S_ADDR_ORG] has completed. The total run time was insufficient for any meaningful statistics.
Thread [TRANSF_1_2_1] created for [the transformation stage] of partition point [AGG_COUNTRY_CITY_ZIPCODE] has completed. The total run time was insufficient for any meaningful statistics.
Thread [WRITER_1_*_1] created for [the write stage] of partition point [W_GEO_DS] has completed. The total run time was insufficient for any meaningful statistics.
MAPPING> CMN_1791 The index cache size that would hold [0] aggregate groups of input rows for [AGG_COUNTRY_CITY_ZIPCODE], in memory, is [0] bytes
MAPPING> CMN_1790 The data cache size that would hold [0] aggregate groups of input rows for [AGG_COUNTRY_CITY_ZIPCODE], in memory, is [0] bytes
MAPPING> CMN_1793 The index cache size that would hold [0] rows in the lookup table for [MPLT_LOAD_W_GEO_DS.LKP_W_LST_OF_VAL_G], in memory, is [0] bytes
MAPPING> CMN_1792 The data cache size that would hold [0] rows in the lookup table for [MPLT_LOAD_W_GEO_DS.LKP_W_LST_OF_VAL_G], in memory, is [0] bytes
MAPPING> CMN_1793 The index cache size that would hold [0] rows in the lookup table for [MPLT_LOAD_W_GEO_DS.LKP_W_GEO_DS], in memory, is [0] bytes
MAPPING> CMN_1792 The data cache size that would hold [0] rows in the lookup table for [MPLT_LOAD_W_GEO_DS.LKP_W_GEO_DS], in memory, is [0] bytes
MANAGER> PETL_24005 Starting post-session tasks. : (Mon Jul 25 17:29:47 2011)
MANAGER> PETL_24029 Post-session task completed successfully. : (Mon Jul 25 17:29:47 2011)
MAPPING> TE_7216 Deleting cache files [PMLKUP14527_524289_0_260L64] for transformation [MPLT_LOAD_W_GEO_DS.LKP_W_LST_OF_VAL_G].
MAPPING> TE_7216 Deleting cache files [PMLKUP14527_524293_0_260L64] for transformation [MPLT_LOAD_W_GEO_DS.LKP_W_GEO_DS].
MAPPING> TM_6018 The session completed with [0] row transformation errors.
MANAGER> TE_7216 Deleting cache files [u01/app/oracle/biapps/dev/Informatica/9.0.1/server/infa_shared/Cache/PMAGG14527_3_0_260.idx] for transformation [AGG_COUNTRY_CITY_ZIPCODE].
MANAGER> TE_7216 Deleting cache files [u01/app/oracle/biapps/dev/Informatica/9.0.1/server/infa_shared/Cache/PMAGG14527_3_0_260.dat] for transformation [AGG_COUNTRY_CITY_ZIPCODE].
MANAGER> PETL_24002 Parallel Pipeline Engine finished.
DIRECTOR> PETL_24013 Session run completed with failure.
DIRECTOR> TM_6022
SESSION LOAD SUMMARY
================================================
DIRECTOR> TM_6252 Source Load Summary.
DIRECTOR> CMN_1740 Table: [SQ_S_ADDR_ORG] (Instance Name: [SQ_S_ADDR_ORG])
     Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [0]
DIRECTOR> TM_6253 Target Load Summary.
DIRECTOR> CMN_1740 Table: [W_GEO_DS] (Instance Name: [W_GEO_DS])
     Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [0]
DIRECTOR> TM_6023
===================================================
DIRECTOR> TM_6020 Session [SDE_GeographyDimension_Business] completed at [Mon Jul 25 17:29:48 2011].
After review the log, I found the select statement was fail, the SQL below was wrong:
SELECT DISTINCT
S_ADDR_ORG.CITY,
S_ADDR_ORG.COUNTRY,
S_ADDR_ORG.COUNTY,
S_ADDR_ORG.PROVINCE,
S_ADDR_ORG.STATE,
S_ADDR_ORG.ZIPCODE,
'0' AS X_CUSTOM
FROM
V_ADDR_ORG S_ADDR_ORG
There is no table V_ADDR_ORG but S_ADDR_ORG in the Siebel transaction database. So I don't know why it generate this sql when transfering data to OBAW. This is the out of box bi application.
Experts! How could I fix this problem?? Please help, thank you very much!!
Best regards,
Ryan

Ryan,
Yes you missed to create views for source tables. so in dac design>> tables tab, select any table and right clieck on it then click on change capture scripts>> generate view scripts. it will ask you whether it can generate script for all the tables. so it will generate view script for you. now run the entire esript in source database. then your problem will be solved.
if this answered your question . make my answer correct.
Thanks
Jay.

RABAX state error on Decision Table

Similar Messages

Maybe you are looking for