RAC - VMware - Installation Guide.

Hello, I am interested in learning RAC.. I have :
Windows XP
1GB RAM
40GB Hard Drive
Oracle10g Release 2
Can anyone guide me How to Install RAC in VMware and what are the minimum requirements for RAC Installation in WMware?
Regards,
Rakesh Soni
http://rakeshocp.blogspot.com/

The_Rock wrote:
Hello, I am interested in learning RAC.. I have :
Windows XP
1GB RAM
40GB Hard Drive
Oracle10g Release 2
Can anyone guide me How to Install RAC in VMware and what are the minimum requirements for RAC Installation in WMware?
Well, I would ask you to get a good box , 1gb ram is just TOO tiny for a RAC install. In my home box, I have got 4gig of ram and I still feel its not adequate. Anyways, if you are on Windows, I guess Jeff's article to make 2 node rac on windows should be a good thing to start from.
http://www.idevelopment.info/data/Oracle/DBA_tips/Oracle10gRAC/CLUSTER_14.shtml
HTH
Aman....

Similar Messages

  • Looking for best practice / installation guide for grid agent for RAC

    I am looking for best practice / installation guide for grid agent for RAC, running on windows server.
    Thanks.

    Please refer :
    MOS note Id : [ID 378037.1] -- How To Install Oracle 10g Grid Agent On RAC
    http://repettas.wordpress.com/2007/10/21/how-to-install-oracle-10g-grid-agent-on-rac/
    Regards
    Rajesh

  • VMware installation for BPC 7.5NW

    Dear All,
    Please let me know what are the prerequisites to install VMware for BPC7.5 NW.
    how to get VMware software with license?
    Also pls share installation guide for same.
    Thanks.
    Regards,
    Chavi

    Hello Chavi,
    Differently from the information Sctott has, there are some notes explaining that VMWare is supported for BPC 7.5. It is just not a good idea to use it in production so I agree with Scott thant this should not be used in production. See below:
    - Note "1098847 - Virtual Machine Support for BPC" explains that virtualization for BPC is covered by Generic Support Statement for Virtualization (note 1492000 - General Support Statement for Virtual Environments).
    - Note 1492000 says that it is supported but if an issue cannot be resolved, SAP can request you migrate to a non-virtual environment. Please note that in this note you have some restrictions and other important information, so it is very important to read it carefully.
    You might want to check notes "1409608 - Virtualization on Windows" and "1599679 - Supported application virtualization for BPC client" as well.
    It is good to read all these notes and the first one also suggest Virtualization on Windows, but personally I think having your production environment virtualized can generate performance issues and you can be asked to install it in a dedicated physical machine.
    Hope it helps
    Debora

  • Installation guide for 9ias on RedHat Advanced Server 3

    Hi
    Does anyone has the installation guide for 9ias on RedHat Advanced Server 3 please? Thank you!

    there is an installation guide for oracle applic server 9 and above on red hat advanced server 3 in pdf format on the linux technology center page on oracle. here is the file link.
    "Install Guide: Oracle Application Server on Red Hat Enterprise Linux AS (PDF) May 2003"
    you may wanna check the following link for that page.
    http://otn.oracle.com/tech/linux/index.html
    is this what you are looking for?
    asif
         

  • Questions on the Hardware requirement mention in the 12c installation guide

    Hello experts,
    I have a confusion on the Hardware requirements mentioned in the 12c installation guide where they mentioned as below.
    RAM with ADP1, JVMD2 8 GB 12 GB 20 GB
    1 ADP Manager is Application Dependency and Performance
    2 JVMD is JVM Diagnostics
    Question 1: what does this RAM with ADP or JVMD mean. is it just the additional RAM space required in the server or does is that special requirement ??
    Oracle WebLogic Server JVM Heap 1.7 GB 4 GB 8 GB
    Size
    Question 2: What is this JVM Heap size ? how do we configure this in the server ??
    Thanks in Advance for your Help.

    Hi,
    #1: It means if you also want to install ADP and JVMD, the total RAM required is a small (e.g. < 1000 targets), medium (e.g. > 1000 targets and < 10000 targets), large EM deployment (e.g. > 10000 targets) is 8 GB, 12 GB, 20 GB, respectively. That is the memory requirement for an OMS host.
    #2: The heap size for the OMS java process. You can adjust the heap size by changing the -Xmx<heapsize> (see an example below) in the following file:
    <middleware_home>/gc_inst/user_projects/domains/GCDomain/bin/startEMServer.sh
    An example of OMS heap size setting of 2048 MB:
    if [ "${SERVER_NAME}" != "EMGC_ADMINSERVER" ] ; then
    USER_MEM_ARGS="-Xms256m -Xmx1740m -XX:MaxPermSize=768M -XX:-DoEscapeAnalysis -XX:+UseCodeCacheFlushing"
    if [ "${JAVA_VENDOR}" = "Sun" ] ; then
    if [ "${PRODUCTION_MODE}" = "" ] ; then
    USER_MEM_ARGS="-Xms256m -Xmx2048m -XX:MaxPermSize=768M -XX:-DoEscapeAnalysis -XX:+UseCodeCacheFlushing -XX:+UseConcMarkSweepGC -XX:+UseParNewGC -XX:+CMSClassUnloadingEnabled -XX:CompileThreshold=8000 -XX:PermSize=128m"
    Regards,
    - Loc

  • Oracle Application Server 10g Installation Guide for Windows

    The link to Oracle Application Server 10g Installation Guide for Windows on the OTN Web Site don't work. Using search on site does not turn up any installation document for Oracle Application Server 10g.
    How can I find the Installtion Guide or the Quick Installtion Guide for Oracle Application Server 10g for Windows?

    Hi,
    The docs you seek are available through the OTN documentation pages at: http://otn.oracle.com/documentation/index.html.
    Click on the link for "Oracle Application Server Release 10g (9.0.4)" and then on the "View Library" link for part B10468_04 - Oracle Application Server 10g Online Documentation 10g (9.0.4.0.0) for Microsoft Windows.
    The Docs are located under the Documentation tab.
    Alternatively, here is the direct link to the Documentation Tab interface of the Library:
    http://download.oracle.com/docs/cd/B10468_04/docs.htm
    Regards,
    Les

  • Fail to install E-Business Suite Diagnostics Installation Guide ID 167000.1

    I am following E-Business Suite Diagnostics Installation Guide [ID 167000.1] for the installation.
    Firstly, i have successfully adsplice Patch 3636980.
    then i try on Patch 7530017 and i hit this error during adpatch:
    About to update the current-view snapshot: Wed Oct 24 2012 18:27:43
    Updating the current-view snapshot...
    ORA-01403: no data found
    ORA-06512: at "APPS.AD_FILE_SYS_SNAPSHOTS_PKG", line 2095
    ORA-06512: at line 2
    AutoPatch error:
    Error while executing statement (curr-vw updt)
    Error calling adphistUpdtCurrVwSnapshot(1).
    Error calling adphistStoreCurPatchHistInDB2
    AutoPatch error:
    Unable to save Patch History information to Database
    Then according to note [ID 468940.1], i need to run the Update current view snapshot, and i hit this error:
    File "atg_supp_patches.sql"
    Either has No Version or Unknown error(-4)
    Failed in adusnapGetDetailFileInfo()
    AD Administration error:
    Failed store Snapshot file info
    adusnapMaintainSnapshot() : Error calling adusnapUpdateCurrentView()
    Error calling adusnapMaintainSnapshot
    Checking from knowledge base, i should follow ID 372491.1 to solve the problem, but i can't figure out which record to follow.
    AD_APPL_TOPS
    appl_top_id,name,server_type_admin_flag,server_type_forms_flag,server_type_node_flag,server_type_web_flag,applications_system_name,appl_top_type,active_flag
    1,tafnw1,Y,Y,Y,Y,prod,R,Y
    43,*PRESEEDED*,,,,,*PRESEEDED*,S,Y
    68,digidb2,Y,N,Y,N,EES06A,R,Y
    69,GLOBAL,,,,,EES06A,G,Y
    21,crmees06,Y,Y,Y,Y,DEV,R,Y
    41,isupplier,N,N,N,Y,DEV,R,Y
    42,t_f_w1,,Y,,Y,DEV,R,Y
    88,AT_ofsdevdb,Y,Y,Y,Y,DEV,R,Y
    45,digiapps1,N,Y,N,Y,DEV,R,Y
    65,GLOBAL,,,,,DEV,G,Y
    66,digiapps1,N,Y,N,Y,EES06A,R,Y
    AD_SNAPSHOTS
    snapshot_id,release_id,appl_top_id,snapshot_name,snapshot_type,comments,ran_snapshot_flag
    1,21,43,*PRESEEDED*11.5.5,B,Preseeded,Y
    8,41,68,CURRENT_VIEW,C,Current View,N
    9,41,69,GLOBAL_VIEW,G,Created from Current View Snapshots,N
    2,21,88,CURRENT_VIEW,C,Current View,Y
    3,61,45,CURRENT_VIEW,C,Current View,Y
    4,61,41,CURRENT_VIEW,C,MERGING_APPL_TOPS_DONE,Y
    5,21,41,PROD,S, ,Y
    6,21,65,GLOBAL_VIEW,G,Created from Current View Snapshots,Y
    7,21,41,BACKUP_SNAPSHOT_4,S, ,Y
    (sorry, not sure how to post the table nicely)
    what should i do next?

    Then according to note [ID 468940.1], i need to run the Update current view snapshot, and i hit this error:Please see (ORA-06512 APPS.AD_FILE_SYS_SNAPSHOTS_PKG [ID 372491.1]).
    Thanks,
    Hussein

  • Need SAP R/3 4.7 Installation Guide

    Guys,
              I need the installation Guide for SAP R/3 Installation.Please help me.
    I will appreciate if anyone can tell me where i can find it.
    Thanks in advance,
    Sanu

    Rudi,
            I clicked on the link that you have provided,But it is prompting a dialog box for user authentication.But the sad thing is that I donot have one.
    Can you tell me if there is any other way of getting that document??
    Thanks in advance,
    Sanu

  • Installation guide Solaris 10 / Oracle

    Hi,
    I have been looking for updated installation guides for Solaris 10 / Oracle 10 on service.sap.com/erp-inst and other locations, but I can only find relevant documentation from February 2005. Does any one know where I can get more updated information?
    Thanks!
    Regards,
    Thomas Kjelsrud

    Thomas,
    I was able to access the same. May be you missed to scroll down the page..
    No issues access the below link
    <a href="https://websmp102.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002599162004E">Inst guide for All scenarios including Solaris 10/ Oracle</a>
    Note that there are two parts
    Part I: Planning and Preparation
    Part II: Installation and Post-Installation
    You must see the planning guide for your scenario Solaris /Oracle installation
    Are you planning for distributed or central installation..?
    Hope this helps
    Good luck
    Cheers
    Senthil

  • Need Assistance in getting SAP NetWeaver 7.02 Installation Guide

    Hi All,
    Can any one please assist me in getting the installation guides for SAP NetWeaver 7.02 on Service Market place?
    I searched for its URL but could not get it. Please share it with me.
    Waiting for your kind replies.
    Regards,
    Faisal

    Hi Faisal,
    You can try this - Log onto SMP
    Software Downloads --> Installations and Upgrades --> click on "Installation and Upgrade Guides" on the left panel; this will open a new browser window --> expand "SAP NetWeaver" on the left panel --> SAP NetWeaver 7.0 (2004s) --> select Installation or Upgrade as per your need; then you can select the appropriate guide.
    Hope it helps.
    Dao

  • Don't see the SCM Installation Guide on 9i Developer Suite CD

    Hi everybody,
    I don't see the SCM Installation Guide on my 9i Developer Suite CD. The CD is Release 2 (9.0.2.0.0) for Windows. I do see a file for the release notes titled 'Oracle Software Configuration Manager Release Notes Oracle9i Developer Suite Release 2 (9.0.2). Any leads on where to find the installation guide is appreciated.
    I'd like to read the guide before installing Oracle Designer 9i. Any help with installing these two products is appreciated.
    Thanks very much,
    -- Bill Loggins

    Bill,
    I don't have a CD to verify its location. However it is available on the otn site. Try the URL:
    http://otn.oracle.com/docs/products/repository/content.html
    Regards
    Mark Pirie

  • SAP R/3 version 4.6C standard Installation Guide for Windows NT.

    Dear Gurus,
    Can anyone help me with step by step installation guide of SAP R/3 Ver 4.6C for windows NT on oracle DB 8.1.7.
    I have never done SAP installation and this will be my first as the systems was installed by consultants.
    regards,
    Chansa.

    Hi ,
    Please have a look
    http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/sapr3.html
    http://docs.mandragor.org/files/Operating_systems/BSDs/FreeBSD_Handbook/sapr3.html
    This might help you.
    Cheers
    Deepanshu

  • Enterprise Portal Sneak Preview, quick installation guide

    Hello,
    Two or three months ago I have installed the SAP NetWeaver Enterprise Portal Sneak Preview SP9. For this purpose I have used the quick installation guide which formerly could be found under the following web-address:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/quick installation guide for sap netweaver ep on maxdb,%20Developer%20Edition%20Sneak%20Preview.htm
    Some of my colleagues would like to install the same release now but the quick installation guide is not available any more.
    Can anybody tell me where the quick installation guide is or which installation guide I can use instead for SP9?
    Thanks!

    Hey Guys,
    I have mailed it to your ID's.
    In case anyone else needs it, you can mail me directly:
    [email protected]
    Wish you all a successful installation ...
    Cheers,
    Gaurav

  • Installation Guide from Informix 10.00.FC6 to Oracle 10.2

    Hi all,
    We have SAP 4.6b with Informix 10.00.FC6 on SunOS 5.10
    I am loking for the installation guide from informix to Oracle 10.2. Where do we look for the installation guide in service.sap.com/instguides?
    Thank You,
    Salman

    Hi,
    Not 100% sure what you are looking for.
    Are you looking for the installation guide of 4.6B in Oracle?
    Or are you looking for the heteroheneus system copy guide to migrate from Informix to Oracle?
    In any case you can find both on the SAP Service Marketplace under
    https://service.sap.com/instguides  -> Sap Components --> SAP R/3 --> Release 4.6B

  • Installation guide for OWB 9.2 name and address

    Hi,
    May you show me where I can find the OWB 9.2 installation document for name and address cleaning software.
    In the installation guide of OWB 9.2, it ask to refer to the installation instruction of software vendor. I am going to use the default vendor (Trillium, the same as OWB9.0.4), but I don't know where to find the installation instruction.
    Thanks in advance,
    Qiguang Wu

    When do you get this message? It seems to be referring to the N&A server, but I would need to have more details. When you installed OWB, the installation program asked for the port (defaulting to 4040) where the N&A server would run. Th N&A server should be started automatically when a mapping containing a N&A operator is run. Otherwise, it is possible to start and stop the N&A server by running the NASstart.bat and NASstop.bat unde the <OWB home>/owb/bin/win32 directory (or the same .sh files in the unix directory).
    Regards:
    Igor

Maybe you are looking for