Raising exceptions in database lookups in message mapping

Hi
We have been able to successfully do a database lookup from within a message mapping - thanks to weblogs already existing out there. However, we have requirement that states that - if the lookup fails ( failure to connect to DB / data retrieved is null ) , then the mapping should fail - and an exception raised.
How can we go about doing this from within the java code - of the mapping lookup ?
Any correct pointers /solutions to achieve this will be rewarded rightaway. Thanks in advance for your time.

Hi,
you can use Alessandro's way:
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
this way you can throw smart exceptions:)
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Similar Messages

JDBC Lookup in message mapping

Hi Folks,
in a message-mapping i use a jdbc lookup.
i get this error, can anybody help me ?
Put value [Plain exception:Problem when calling an adapter by using communication channel JDBC_MKA_Receiver_Lookup (Party: , Service: R3EREDATA, Object ID: 3ab59ba811163c5697dbcd40fb0c4957) Check whether the communication channel exists in the Integration Directory; also check the cache notifications for the instance Integration Server (central Adapter-Engine) Channel object with Id Channel:3ab59ba811163c5697dbcd40fb0c4957 not available in CPA Cache.
thanks for your help

Hi Folks,
now i get a new error.
it will be nice when you could answered me, thanks
Put value [Exception during processing the payload.Problem when calling an adapter by using communication channel JDBC_MKA_Receiver_Lookup (Party: , Service: BS_EPS, Object ID: 866ef440ca5b3cefb1381267f5693591) XI AF API call failed. Module exception: (No information available). Cause Exception: 'JDBC Adapter configuration not initialized: null'. com.sap.aii.mapping.lookup.LookupException: Problem when calling an adapter by using communication channel JDBC_MKA_Receiver_Lookup (Party: , Service: BS_EPS, Object ID: 866ef440ca5b3cefb1381267f5693591) XI AF API call failed. Module exception: (No information available). Cause Exception: 'JDBC Adapter configuration not initialized: null'. at java.lang.Throwable.<init>(Throwable.java:194) at java.lang.Exception.<init>(Exception.java:41) at com.sap.aii.mapping.api.StreamTransformationException.<init>(StreamTransformationException.java:29) at com.sap.aii.mapping.lookup.LookupException.<init>(LookupException.java:72) at com.sap.aii.ibrun.server.lookup.AdapterProxyLocal.execute(AdapterProxyLocal.java:131) at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.execute(SystemAccessorInternal.java:68) at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.process(SystemAccessorHmiServer.java:149) at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.process(SystemAccessorHmiServer.java:77) at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169) at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:296) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211) at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletImpl.java:634) at javax.servlet.http.HttpServlet.service(HttpServlet.java:733) at javax.servlet.http.HttpServlet.service(HttpServlet.java:848) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:332) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:0) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:336) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:868) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:250) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:0) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:92) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:30) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:35) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:99) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.af.service.api.AFException: XI AF API call failed. Module exception: (No information available). Cause Exception: 'JDBC Adapter configuration not initialized: null'. at java.lang.Throwable.<init>(Throwable.java:194) at java.lang.Exception.<init>(Exception.java:41) at com.sap.aii.af.service.api.AFException.<init>(AFException.java:88) at com.sap.aii.af.service.api.AdapterAccess.sendMsg(AdapterAccess.java:214) at com.sap.aii.af.service.api.AdapterAccess.execute(AdapterAccess.java:283) at com.sap.aii.ibrun.server.lookup.AdapterProxyLocal.execute(AdapterProxyLocal.java:123) at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.execute(SystemAccessorInternal.java:68) at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.process(SystemAccessorHmiServer.java:149) at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.process(SystemAccessorHmiServer.java:77) at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169) at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:296) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211) at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletImpl.java:634) at javax.servlet.http.HttpServlet.service(HttpServlet.java:733) at javax.servlet.http.HttpServlet.service(HttpServlet.java:848) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:332) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:0) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:336) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:868) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:250) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:0) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:92) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:30) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:35) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:99) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) ]

Local lookup in message mapping

Hi all,
I've a table on the SAP PI system filled with data. From my message mapping, I want to do a lookup.
What's the best way to perform this lookup.
Again, this is a local table. So not a table residing on the SAP ECC system.
Thanks a lot.
Dimitri

Hi,
>>>I've a table on the SAP PI system filled with data. From my message mapping, I want to do a lookup.
What's the best way to perform this lookup.
the best/easiest way would be to use ABAP mapping (right after your message mapping - as in interface
determination you can have many mappings)
just to do the lookup in XI table (in abap mapping you juse use a select to get this data)
so map the data in message mapping
then do the lookup in abap mapping just for this one field
Regards,
Michal Krawczyk

RFC lookUp during Message mapping

All
I want to get soem values from SAP table during message mapping.After getting the values am going to do 2:1 mapping by using BPM.
Could you please let me know the basic and fundamental things about RFC look up during mapping and RFC settings in XI as well in R3?
Please explain

Hi Rajesh,
Pl post this in XI Forums to get quick replies.
Regards
Ayyapparaj

Exception in RFC Lookup

Hi Experts,
I have a query in Graphical RFC Lookup function.
I am working on Pi 7.1 and scenario is File to Idoc.
In the file, material number is coming, and I have to find out the corresponding Customer number from ECC table using RFC Lookup.
I know how to use RFC lookup.
But here issue is, if Customer Number is not maintained in the ECC table for the incoming material number, then exception should be thrown and processing should be stopped at that moment.
Please tell me how to throw this exception and hence fail the mapping.
-Supriya.

Hi ,
I guess you want to fail the message transformation at Message mapping level with Red Error in Monitoring , If LOOKUP return Nothing ...
What You can Do Is , Instead of RFC LOOKUP Function , Use UDF Based RFC LOOKUP , and Inside UDF you can easily raise exception.
Or
In Grapphical Message mapping pass the result from RFCLOOKUP To a 1..1 Target , if during transfermation if 1..1 node will not get any value , so mapping will get failed automatoicaly ..
hope the idea Helps
regards
PS

BW server raises exception SYSTEM_ERROR

Hi,
When trying to run a query in BEx, the BW Server is throwing an exception name SYSTEM_ERROR. These are the details
<internal error> Recieving from the BW System failed. BW Server raised exception SYSTEM_ERROR
Error Group: RFC_ERROR_SYSTEM_FAILURE
Message: Time Limit exceeded
I first referred to this thread Query Execution Error
and this one
Re: Error in Reprots: BW server raised exception:SYSTEM_FAILURE
but I still have some doubts. First,
this error is coming only for one specific report. Other reports are executing perfectly fine. If it was a problem with the SAPGUI or with the RFC connection itself, all reports on the BW system should have thrown the same error.
Plus, the Message in my case is "Time Limit Exceeded", not Field Symbol not assigned, or RFC Destination on-existent.
Is there any other note or do the above links also apply in this case?

Restrict your query with some values and then try running the query. Generally, if the data volume is very high, the system shows this kind of error.
You can also use a variable in your query and while running the query, select a smaller part og the data.
Hope it will help you.
Thanks.,.
Shambhu

Data lookup in R/3 database from message mapping

Hi,
I am trying to lookup R/3 database from Message mapping.
Instead of creating Java class outside XI and then importing into Integration Repository, I have defined an advanced function in message mapping and trying to connect to R/3 using JCo API. But System is giving syntax errors as listed below:
Check Result for Object CustomerDetailsMap Source code has syntax error:
F:/usr/sap/C03/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapc1513850c14511d985d5001143eb68b9/source/com/sap/xi/tf/_CustomerDetailsMap_.java:58: illegal character: 160 Â Â Â Â Â Â Â Â // Change the logon information to your own system/user
F:/usr/sap/C03/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapc1513850c14511d985d5001143eb68b9/source/com/sap/xi/tf/_CustomerDetailsMap_.java:60: illegal character: 160 Â Â Â Â Â Â Â Â Â Â Â Â "DEV18" ,Â Â Â Â // userid
Can somebody help in rectifying the problem?
Thanks and Regards,
Nitin.

Hi,
can u post the java code which u have used in mapping.
There is a doc in XI-Articles. "How to Perform SAP Data Lookups Within XI Mappings" By Jerome Delune 16 October, 2003. Try looking at this article and do ur mapping.
Hope this helps you.
Cheers,
Siva Maranani.

SOAP lookups from withing message mapping

Hi
 We are doing a call to a webservice from within a udf in a message mapping using the SOAP API described in one of the blogs in SDN. We are using a soap receiver communication channel to make this webservice call -
We see activity on the communication channel monitoring - indicating that there is a call going out and a response coming back from the webservice. But there are no details shown on the payload in communication channel monitoring. We do not see this webservice lookup as a message on the adapter engine either ?
Is there any place from within XI runtime environment we can get a hold of the message going out to webservice call and the return from webservice ? We are facing problems in the webservice not doing the required action desired and hence this question on visibility of the call to the webservice.
Thanks in advance for your time.

My udf is basically makes a call to the webserservice lookup method ( line - CallCentralMonitoring.LogToCentralMonitoring( "IN130.10", "COMPLETED"); ) - the definition of CallCentralMonitoring class is given below after the udf
UDF
String adapter = "RECEIVE_FusionDBLookUpRequest";
Channel channel = null;
boolean retry = false;
int noOfRetries = 0;
String sqlQuery = new String("");
DataBaseAccessor accessor = null;
DataBaseResult resultSet = null;
String parameterValue = new String("");
MappingTrace trace = container.getTrace();
// Build the Query String
//sqlQuery = "select * from CTL_BusinessRules with (nolock) where parameter_key = '" + parameterKey + "'";
sqlQuery = "exec uspCTL_GetBusinessRule '" + parameterKey + "'";
do
 try
 //trace.addInfo( "SQL query is: " + sqlQuery);
 // Determine a channel, as created in the Configuration
 channel = LookupService.getChannel(businessService,adapter);
 // Get a system accessor for the channel. As the call is being made to a DB, a DatabaseAccessor is obtained.
 accessor = LookupService.getDataBaseAccessor(channel);
 //trace.addInfo( "Successfully obtained the system accessor..." );
 // Execute Query and get the values in resultset
 resultSet = accessor.execute(sqlQuery);
 Iterator rows = resultSet.getRows();
 //trace.addInfo( "Executed query successfully..." );
 while( rows.hasNext() )
 Map rowMap = (Map)rows.next();
 parameterValue = rowMap.get("CHARACTER_VALUE").toString();
 //trace.addInfo( "Parameter Value is: " + parameterValue );
 retry = false;
 CallCentralMonitoring.LogToCentralMonitoring( "IN130.10", "COMPLETED");
 return parameterValue;
 catch( Exception ex )
 //trace.addInfo( ex.toString() );
 if ( noOfRetries < 3 )
 retry = true;
 noOfRetries++;
 else
 retry = false;
 CallCentralMonitoring.LogToCentralMonitoring( "SD152.01", "Error");
 ExceptionThrower.fire( "Database connectivity error: " + ex.toString() );
 finally
 try
 if ( accessor != null ) accessor.close();
 catch( Exception e )
 ExceptionThrower.fire("Error closing accesor: " + e.getMessage() );
 //return e.getMessage();
} while( retry );
return null;
Class CallCentralMonitoring
package com.xxxxx.xi.mapping.udf;
import java.io.ByteArrayInputStream;
import java.io.InputStream;
import com.sap.aii.mapping.lookup.Channel;
import com.sap.aii.mapping.lookup.LookupException;
import com.sap.aii.mapping.lookup.LookupService;
import com.sap.aii.mapping.lookup.Payload;
import com.sap.aii.mapping.lookup.SystemAccessor;
import com.sap.aii.mapping.lookup.XmlPayload;
public class CallCentralMonitoring {
 public static void LogToCentralMonitoring (String MON_EISLDCTLID, String MON_MsgStatus) {
 String soapXML = new String("");
 /* Pass the Business System and Communication Channel as input to the getChannel().
 /* BS_SOAPLOOKUP Business System*CC_Webservice_SOAP_CURRENCY_CONVERTOR Receiver SOAP Adapter */
 Channel channel = null;
 try {
 channel = LookupService.getChannel( "EI_CentralMonitoringServives", "Receive_SOAP_TrackingServiceWS" );
 } catch (LookupException e) {
 // TODO Auto-generated catch block
 e.printStackTrace();
 SystemAccessor accessor = null;
 try {
 accessor = LookupService.getSystemAccessor(channel);
 } catch (LookupException e) {
 // TODO Auto-generated catch block
 e.printStackTrace();
 /* Construct the SOAP Request Message using the InputParameters */
 soapXML = "<LogToCentralMonitoring xmlns=\"http://xxxxx.EI.CentralMonitoring\"> <loggingData> <MON_EISLDCTLID>"
 + MON_EISLDCTLID
 + "</MON_EISLDCTLID><MON_ProgramID>"
 + MON_EISLDCTLID
 + "</MON_ProgramID><MON_ProcessID>"
 + MON_EISLDCTLID
 + "</MON_ProcessID><MON_ClientAlert>"
 + "N"
 + "</MON_ClientAlert><MON_MsgStartTimeStamp>"
 + "03/30/2007 10:00:00"
 + "</MON_MsgStartTimeStamp><MON_MsgEndTimeStamp>"
 + "03/30/2007 10:00:01"
 + "</MON_MsgEndTimeStamp><MON_MsgStatus>"
 + MON_MsgStatus
 + "</MON_MsgStatus><MON_MsgStatusDescription>"
 + MON_MsgStatus
 + "</MON_MsgStatusDescription> </loggingData> </LogToCentralMonitoring>";
 InputStream inputStream = new ByteArrayInputStream(soapXML.getBytes());
 XmlPayload payload = LookupService.getXmlPayload(inputStream);
 Payload soapOutPayload = null;
 /The SOAP call is made here and the response obtained is in the soapOutPayload./
 try {
 soapOutPayload = accessor.call(payload);
 } catch (LookupException e) {
 // TODO Auto-generated catch block
 e.printStackTrace();
 }//end LogToCentralMonitoring
}//end class

How can I obtain an specific message raised by a database trigger

Dear friends,
if I have a database trigger and I want to show an error message which was raised from a database trigger to a form, I can do it by raising an application error inside database trigger, and by showing DBMS_ERROR_TEXT inside ON-ERROR trigger. This is ok for me.
But how can I do if I want to show a specific message? Let's say I have a BEFORE INSERT table trigger, and I want to verify whether data was correctly informed (for example, "user name must be entered"). If I raise an application error, I see a very big error message which includes both my personal error message and database message.
Surely I can do a SUBSTR in this message, but can't I do something easier? Let's say I put all error messages in a variable:
(Let's suppose it's a BEFORE INSERT trigger code, which is related to my table)
if :NEW.user_name is null then
p_error_message := 'User name must be entered.';
end if;
if p_error_message is not null then
raise_application_error (-20000, p_error_message);
end if;
... with this p_error_message being shown to final user, with no need to edit it via PL/SQL instructions like SUBSTR. Is this possible? If not, I'll be quite satisfied with SUBSTR because it fits my needs somehow.
Best regards,

raise_application_error will be used for raise errors on form.here i'm providing u the example
CREATE TRIGGER at AFTER UPDATE OR DELETE OR INSERT ON emp
for each row
declare
v_1 number
begin
select empno into v_1 from emp where empno=7369 ;
exception when no_data_found then
RAISE_APPLICATION_ERROR(-20001,'No data found'||sqlerrm);
END;
now when you insert data on emp table through form. if value does not found of selected empno then No data found will be shown on form
Edited by: SKYNIAZI on Mar 20, 2009 12:19 PM
Edited by: SKYNIAZI on Mar 20, 2009 12:56 PM

Soap lookup in PI7.31 message mapping

Hi All,
I have a soap lookup created in UDF in PI message mapping
I am taking material id from the source structure and use it as input parameter for the lookup webservice
Here is the UDF code which takes material number and returns the internal id
AbstractTrace trace = container.getTrace();
String matintid = "";
try {
//instance the channel to invoke the service.
Channel channel = LookupService.getChannel("BS_Bus","CC_SearchLookup");
SystemAccessor accessor = LookupService.getSystemAccessor(channel);
// The Request message in XML. THIS IS THE LOOKUP SERVICE
String SOAPxml = "<?xml version=\"1.0\" encoding=\"UTF-8\"?><searchTM_MATERIAL>xmlns:ns0=\"MDM_MAT_Search_MDM"><query><criteria><fTX_MATERIAL><constraint><value>"
+a
+ "</value><expressionOperator>equals</expressionOperator></constraint></fTX_MATERIAL></criteria></query><reposInfo><repositoryName>REP_MATERIALS</repositoryName><serverName>mdm6765</serverName></reposInfo></searchTM_MATERIAL>";
InputStream inputStream =new ByteArrayInputStream(SOAPxml.getBytes());
XmlPayload payload = LookupService.getXmlPayload(inputStream);
Payload SOAPOutPayload = null;
//The response will be a Payload. Parse this to get the response field out.
SOAPOutPayload = accessor.call(payload);
/* Parse the SOAPPayload to get the SOAP Response back. */
InputStream inp = SOAPOutPayload.getContent();
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
/* Create DOM structure from input XML */
DocumentBuilder builder = factory.newDocumentBuilder();
Document document = builder.parse(inp);
NodeList matlist = document.getElementsByTagName("tM_MATERIAL");
Element material = (Element) matlist.item(0);
NodeList recidlist = material.getElementsByTagName("recordIdentification");
Element recidnode = (Element)recidlist.item(0);
matintid = recidnode.getNodeValue();
trace.addInfo("matnid is" + matintid);
} catch (Exception e) {
trace.addWarning("Error" + e); }
trace.addInfo("Service XXX success executed");
return matintid;
This is giving a java null point error
Errorjava.lang.NullPointerException: while trying to invoke the method org.w3c.dom.Element.getElementsByTagName(java.lang.String) of a null object loaded from a local variable at slot 16
Any idea whats going on? I am able to get response for the webservice using SOAP UI
And here is the soap input and output in SOAP UI execution
Input
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:urn="urn:MDM_MAT_Search_MDM" xmlns:urn1="urn:com.sap.mdm.ws.beans.mdt_mat_search_mdm_in" xmlns:urn2="urn:com.sap.mdm.ws.beans" xmlns:urn3="urn:com.sap.mdm.core.beans">
 <soapenv:Header/>
 <soapenv:Body>
 <urn:searchTM_MATERIAL>
 <urn:query>
 
 <urn1:criteria>
 
 <urn1:fTX_MATERIAL>
 <urn2:constraint>
 
 <urn2:value>12345</urn2:value>
 
 <urn2:expressionOperator>equals</urn2:expressionOperator>
 </urn2:constraint>
 </urn1:fTX_MATERIAL>
 </urn1:criteria>
 </urn:query>
 <urn:reposInfo>
 <urn3:repositoryName>REP_MATERIALS</urn3:repositoryName>
 <urn3:serverName>mdm1234</urn3:serverName>
 </urn:reposInfo>
 </urn:searchTM_MATERIAL>
 </soapenv:Body>
</soapenv:Envelope>
Output:
<SOAP-ENV:Envelope xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
 <SOAP-ENV:Body xmlns:rpl="urn:MDM_MAT_Search_MDM">
 <rpl:searchTM_MATERIALResponse xmlns:rn0="java:sap/standard" xmlns:rn1="urn:com.sap.mdm.ws.beans" xmlns:rn2="http://schemas.xmlsoap.org/soap/encoding/" xmlns:rn3="urn:com.sap.mdm.core.base" xmlns:rn4="urn:com.sap.mdm.ws.beans.mdt_mat_search_mdm_in" xmlns:rn5="urn:com.sap.mdm.core.beans">
 <rpl:Response>
 <rn1:executionStatus>
 <rn1:status>OK</rn1:status>
 <rn1:description>Search/Retrieve done successfully</rn1:description>
 <rn1:dataObject>Records 1..1 of 1 found</rn1:dataObject>
 </rn1:executionStatus>
 <rn4:tM_MATERIAL>
 <rn4:fTX_MATERIAL>12345</rn4:fTX_MATERIAL>
 <rn4:recordIdentification>
 <rn4:internalID>1267</rn4:internalID>
 </rn4:recordIdentification>
 </rn4:tM_MATERIAL>
 </rpl:Response>
 </rpl:searchTM_MATERIALResponse>
Thx
mike

Hi Mike,
What I suspect is, you get a null pointer exception because the XML tag name which you are trying to retrieve, has a namespace. Could you please instead try to use:
getElementsByTagNameNS(java.lang.String namespaceURI, java.lang.String localName)
 Returns a NodeList of all the Elements with a given local name and namespace URI in document order.
Let us know if it works.
Regards,
Shweta

Send Alerts(e-mail) for errors in SXMB_MONI(message mapping exceptions)

Good afternoon !
        I´m configuring SAP Netweaver PI 7.0(SP13) to use Alert Framework to send Alerts when errors occurs in the interfaces processing.
        I just achieved configure to send alerts when errors ocurrs in the Adapter Framework but, I can´t configure correctly to send alerts when errors ocurred only in SXMB_MONI(for example, message mapping exception in asyncronous interface).
        I just followed the instructions at Michal Krawczyk
weblog(/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step) and, initially, this was not sufficient to start to send alert when errors occurs only on SXMB_MONI, so, I researched and found some configurations to do in CCMS(started from here: http://help.sap.com/saphelp_nw70/helpdata/en/e3/bf3b7a8ccb8040b638ff732c551aeb/content.htm), jobs to start events collectors, etc, and after this, I could see a mail for an message mapping exception. BUT, this message, sent from CCMS to ALM, doesn´t carry out all the message parameters, like message Id, sender(service, interface), receiver(service, interface), that is very important to help to find the message with errors to be solved.
        There is somebody here that already done the Alert configuration to send messages for errors found only in SXMB_MONI(Monitor for processed XML Messages) ?
        There is a better way to achieve this ?
        Thank you for your attention,
        Wilson Rodrigo dos Santos
        SAP Netweaver XI/PI Consultant

Hi
Go through these links and follow it.
ALERTS CONFIG AND STUFF
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
XI: Alerts - Step by step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
http://help.sap.com/saphelp_nw04s/helpdata/en/d0/d4b54020c6792ae10000000a155106/frameset.htm
Triggering by Calling a Function Module Directly.
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Alerts with variables from the messages payload (XI) u2013 UPDATED
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Simple Steps to Get Descriptive Alerts from BPM in XI
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
Triggering XI Alerts from a User Defined Function
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Throwing Smart Exceptions in XI Graphical Mapping
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
/people/sukumar.natarajan/blog/2007/01/07/how-to-raise-alerts-from-abap-proxy
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/sravya.talanki2/blog/2006/11/22/error-handling-framework-xiout-of-the-box-episode-1
/people/ginger.gatling/blog/2005/06/16/integrating-alerts-into-uwl--its-no-problem
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.ht
http://help.sap.com/saphelp_nw04/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
check this links.
https://www.sdn.sap.com/irj/sdn/forums
Trouble shooting Alert configuration:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Alert Inbox
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Alert Notification Step-by-Step
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Defining Alert Classifications
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Triggering Alerts
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Setting up alerts
Setting up alerts in RZ20
Alert Management
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e04141e8-0f11-2a10-adaa-9d97b062c2df
Alert Notification
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90f449a8-a6db-2910-a386-d2b5999f5751
/people/matt.kangas/blog/2006/06/27/personalized-alert-delivery
Thanks
Saiyog

RFC Lookup's in message mapping fail with RuntimeException for no reason

Hi guys,
We have developed interfaces that execute a lot of RFC's from Message Mapping, by making use of RFC Lookup API.
In ID, in the corresponding RFC Receiver Communication Channel we have set the number of maximum connections to 100.
However, when a big number of Idocs with lots of items is sent to XI some messages fail in XI because mapping fails with a runtime exception that is not correct, since there is a return value found from the execution of the RFC function. And when I am testing the mapping in Test mode of XI IR, the mapping is executed successfully.
Do you think that by increasing the maximum number of connections in Communication Channel, it will take effect?
Evaggelos

Hi Evaggelos,
DECREASE, may be til 10.
Regards,
Udo

To get exception value in Message Mapping

Hi folks,
I would like catch bpm step exception in one message mapping, for example:
I have create on ccBPM using one block, in block i have createad "ex" exception variable and set ex in all step (send and transformation), i have created one exception branch in block using "ex" exception.
How can i get "ex" value and pass for one message mapping ?
In MM how can i get text values from excpetion ocurred in ccBPM ?
Im am trying using Global Variables but not found any parameter of exceptions.
Can anybody help me, please?

hi,
>>In MM how can i get text values from excpetion ocurred in ccBPM ?
this is not possible
Regards,
Michal Krawczyk

Error: 28005, Severity: 16, State: 2...An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impe

I've seen some similar questions, but want to make sure I can get an answer quickly and how to fix.
Thanks,
Paul
spid24s Error: 28005, Severity: 16, State: 2
spid24s An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impersonated,
or you do not have permission.

Hi Paul,
I also had the same error on one of my servers, and it was because the user that created the database no longer worked for the company.
So when his AD account got deleted, the database had NULL as owner
Using the following query I asked for the owners of the databases:
select name, suser_sname(sid) from master.dbo.sysdatabases
So changing the owner of the databases that had a NULL owner solved the issue for me.
use <databasesname>
go
exec sp_changedbowner 'sa'
Thanks for triggering the solution.
Peter

Lookup value mapping table through message mapping.

Hello All,
I am working on a graphical mapping (message mapping). When trying to map the source message to the target message, I need to find out it a particular key exists in the value mapping table. Depending on the result, I need to map different source fields to the target field.
Is there any inbuilt function which will allow me to do a lookup on a value mapping table, or is it possible to lookup a value mapping table from a UDF?
Please help!
Warm Regards,
Keerti

Hi,
Please see the below links for Value mapping ..
Value mapping /people/sukumar.natarajan/blog/2006/10/23/accessing-value-mapping-defined-in-directory-using-java-functions
Value mapping in XSLT /people/sreekanth.babu2/blog/2005/01/05/design-time-value-mappings-in-xslt
Value Mapping replication - /people/sreekanth.babu2/blog/2005/02/23/value-mapping-replication
Also see
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=value%20mapping%20in%20xi&cat=sdn_weblog
/people/community.user/blog/2007/01/08/valuemapping-using-the-graphical-mapping-tool
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=value%20mapping%20in%20xi&cat=sdn_weblog
Regards
Pradeep N

Raising exceptions in database lookups in message mapping

Similar Messages

Maybe you are looking for