RAM not available for new macbookpros?

on the crucial site they claim to have the RAM for the new macbook pros, but it is the 204pin not the 200pin the user manual suggests. what gives? is there anywhere out there selling the 200 pin DDR3 RAM (besides apple) needed for the new macbookpros?

I think that this 200-pin nonsense is perhaps a typo in the manual:
Each memory slot can accept an SDRAM module that meets the
following specifications:
 Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format
 1.25 inch (3.18 cm)
 1 GB or 2 GB
 200-pin
 PC3-8500 DDR3 1066 MHz Type RAM
You can add two 2 GB memory modules for a maximum of 4 GB of memory. For best
performance, fill both memory slots and install an identical memory module in each
slot.
That being said, I have been using this: http://www.crucial.com/store/partspecs.aspx?imodule=CT2KIT25664BC1067 for about a week and a half with no problems whatsoever. That memory meets the requirements in the late 2008 macbook pro manual, the only exception is the pins.

Similar Messages

  • New portal component not available for new iView

    I've just written my first portal component using the NetWeaver Developer Studio.  It's a trivial "Hello World" application. 
    If I run it in the portal from the NWDS it runs successfully allowing me to capture the full URL.
    I tried to export the par file and upload it to my portal.  I used the Archive Uploader from the portal to load the par file (System Configuration -> Support -> Portal Runtime -> Administration Console).  The upload appeared to go successfully but the "Archive Deployment Checker" shows the local and repository versions as "undefined" with "update", "delete" and "refresh" buttons - no "install" button.
    When I try to build an iView to display this component I don't see it in the list of possible types. 
    (portal content -> new iViews -> choose source type of "portal component") I can't see anything that looks remotely like my component.
    If I create a generic applicationintegrator iView I can paste the full URL from my NWDS test run and it works.  I can even build that into a role and make it appear in the portal content area. 
    How do I:
    1  find/make visible my component so I can build an iView directly from it
    2  if I can't do 1, configure the URL a little more generically so it's portable.
    The URL in the iView looks like
    http://dev.mycompany.com:5xx00/irj/servlet/prt/portal/prtroot/MyHomePage.HomePage
    and I'd like it to look like
    http://<prtroot>/MyHomePage.HomePage

    Hi Murray,
    Try to deploy your portal application from NWDS itself.
    NWDS
    Windows / Preferences / SAP Enterprise Portal /Add
    After that check in Portal Archive Selection your component will be there.
    And for shorter URL you needs to check the DNS settings.
    Regards,

  • Product Not available for online sales.

    Hello
    Can some one please help me on this issue?
    We are using Crm 4.0 with back end as people soft.
    Sometimes we require some products not to be available for internet sales in the web shop. 
    We generally make those products not available for online sales by assigning it to category u201CObsoleteu201D which Blocks it for online sales
    But for the old orders in Open status containing these products, it should allow us to make any changes when order change files i.e. shipment and delivery comes.
    It throws an error that u201CProduct is not available for onlineu201D.
    I have tried the option locked given in the Product master,
    This option makes product not available for new orders but throws an error when order change files comes from People soft.
    Can you help / suggest if there any configuration settings which can
    -         Make those products not available for one line sales
    As well as
    -          Should allow processing of old orders in the open status
    Many Thanks
    Nimit
    Edited by: Nimit Pahwa on Aug 28, 2008 7:40 PM

    hi patrick,
    that feature must be in the delivery-blocker. I have no system at the moment, but it is there. ( parallel to the credit-check-status )
    Hans

  • New DSO data fields are not available for transformations in the upwardflow

    Hello,
    There are data flow from
        many source DSOs -> Target DSO -> Final DSO.
    Different transformations are defined and activated with DTPs. This works fine and provides the desired results.
    now new fields are added to the target DSO, final DSO and one of the source DSO.
    When I now try to edit the transformations, the new fields are not part of the sources at the different stage.
    The fields are available in the Data Source created out of a DSO but not directly when using a DSO as a data source.
    Have anyone faced such a problem?
    any solutions to this?
       - I cannot delete all the other transformations as this is too much work to do and there is no time for it.
    Regards
    Kannan

    We created ZMD_BS_MAT_OVP_LAYOUT. But the situation has not changed - the fields are not available for edit.

  • I purchased a new Mac Air. I try to update apps and I get this:This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. They do not show up in 'Purchases'.

    I can't update iMovie, Garage Band, Numbers, Pages, Keynote, and iPhoto. on my new Mac Air. 11". I had hoped when I updated to OS X Yosemite that would solve the problem. It didn't. I get this: This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. I went to the app store, as was suggested in someone else's post, using the only ID I've ever had, and went to the purchases tab, to "accept" the apps. That didn't work, because they weren't there to 'accept'. They did come with my purchase, however. Please advise.

    It appears Best Buy is up to their old tricks of palming off returned units as new. Take it back for a complete refund of your money. If they give you any static escalate your problem to management immediately.

  • Upgraded to Yosemite,  Created new apple ID as couldn't remember last one now can't update iPhoto receive message this update not available for this apple Id either because it was bought by a different user or item refunded or cancelled.

    upgraded to Yosemite and now can't update Iphoto or Imovies receiving message this update not available for this apple ID because it was bought by a different user or item refunded or cancelled.  Is there an easy fix

    Unfortunately, anything obtained at the app store remains tied to the Apple ID used to obtain it forever. You will either have to start over with your new ID or try to recover the original ID.
    Frequently asked questions about Apple ID

  • HT204380 I am new to Facetime.  I want to be able to talk to my iMac from my Macbook.  When I try to connect via email I get a message that says the person being called "is not available for Face Time".

    I am new to Facetime.  I want to be able to talk to my iMac from my Macbook.  When I try to connect via email I get a message that says the person being called "is not available for Face Time".

    Hi PhiDor,
    Thanks for visiting Apple Support Communities.
    See this article for some information that can help:
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/ts4185
    Regards,
    Jeremy

  • HT1849 I have already bought two tracks off of Kanye West new album Good Music, but when I try to complete album it is not available for me to purchase. Can anyone help?

    I have already bought two tracks off of Kanye West new album Good Music, but when I try to complete album it is not available for me to purchase. Can anyone help?

    I have tried many things and none of them work i have purchased over 340 songs itunes and id really noy like to lose them all.

  • Error importing new version of our app "Application not available for edit"

    Hi,
    We are trying to import an app and get the error: Application not available for edit
    thats it on a clean white background - Application not available for edit shows up at the top left corner of the screen.
    Any clues?
    We tried a new id, tried a custom id.
    Then we tried deleting the existing app so we could insert the new app.
    We can't delete either.
    Help!

    I'm going to hijack this thread and ask a follow up question to Scott (or whoever reads this).
    When we export our application out of DEV it gets exported as Run + Build. When I have the DBA import into test or production on the Import screen I have them set it to Run Only and Reuse the Application ID. After installing it just forwards you to the same white screen with the "Application not available for edit" message on it. Now I understand the actual message since its Run Only, but its not clear that the import actually worked correctly or not.
    So although it does seem to import correctly, they always get nervous when they see this that it didnt import correctly. So is it better to have them import as Run + Build and then go change the build status through the admin front end rather than the way I'm doing it now?

  • Just bought new Macbook Pro, can't download updates because of this message:This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

    Mac app store will not download updates because of error message

    Hi,
    I also am getting this message. I bought my 15" mac book pro mid 2010 and at the same time purchased iWork. It is not showing in my purchases on Apple ID, I have never changed my Apple ID since purchase. Why would my Apps not show. There are some there but mostly free ones. I checked it under the Store menu after signing in.
    After upgrading from Mountain Lion to Yosemite  my iPhoto, iMovie, Keynote,Pages and Numbers need to update. But I get this message.
    "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
    I have not changed ownership or Apple ID on my mid 2010 Mac Book Pro since purchase. What would cause this?

  • I can't update my iPhoto. "Update is not available for this Apple ID".

    Updating my iPhoto has always been a problem.  When I try, I get the error of: "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
    This is the only apple ID I have ever owned, and now that I updated my Mac with the new software, I can't even OPEN iPhoto anymore. Now I can't view any of my photos and I am not a happy camper..
    How can I fix this problem?????
    Thanks in Advance!

    Contact App Store support. There's a link on the right hand side of the App Store Window. They're the only ones who can sort out account issues.

  • This email address is not available for use as an Apple ID

    hi
    i had two apple accounts
    and just wanted to change the primary email address for the both with each other
    when i changed the first one my old email cant be used with other account then i tried replacing my old email it doesnt replace it says
    This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.
    please help me

    Yes,  I am having the same problem.  When I called apple they said that things were "tied up somehow" with another account that has a do different birthday than me.  Uuuuuhh?  So that means someone else can log in?... I have a feeling there is a big vulnerability with the three login options, just like with the current and past password retrieval. Apple had only suggested that I delete my current set up on my serviced and make a new ID and email.
    I Just got a new email and made a new Apple ID account For now. I was hoping the email would work itself out. I assumed If I could make sure everything was verified, not associated with another account, and try to get rid of the alternate id and second email option also used to sign in (seen in Apple ID management)  that could possibly be construed or mixed up with something else that it would eventually free up and become "available" again.  Unfortunately im still waiting In hopes in just needs to recognize the email isn't associated with anything.
    I have had a few major concerns with apple products lately especially with security. My iPhone 4s was hacked too. Some ******* was listening/recording and when I hooked to Internet he sent out the recorded portion that was available.  Talk about ****** up.

  • Valid size not available for this creation when using Greeting Card feature

    Using PSE9 with a Mac.  When attempting to create a greeting card, after selecting the photo, the Greeting Card, I receive a pop up error message as follows:
    "Valid Size Not Available For This Creation".  (All other Create functions such as Photo Book, Photo Calendar, and Photo Collage appear to be working).  I have been in contact with Adobe Support and have been instructed to do a number of things from creating a new preferences file to uninstalling and re-installing the PSE software, with no result.  Has anyone else run into this problem, and if so have found a fix?  Thanks.

    I've been tearing my hair out over this one also. I've been on hold for over 10 hrs with Adobe Support waited over almost 2 weeks and still no resolution. I'm trying to create the Save the Date cards for my wedding and I can't wait for Adobe. Removing the preferences file and uninstalling/reinstalling does not fix the problem.
    That said I did figure out a workaround for this. It's easy but it does require Windows. For me this was no big deal as I do own a Windows box.
    Get the free trial version of PE9 for Windows and install it. If you don't have a Windows computer get to a friend that has one
    Upload some of your photos to the PE9 Windows Organizer (it's identical to the mac version)
    Select Create and then Greeting card. Photoshop will launch the guided edit feature for greeting cards.
    Select the Layout feature and once you find out that you like save it as Photoshop project. Repeat this step for as many layouts as necessary.
    Copy your Photoshop project files (and any folders) to your mac.
    Open the project files as you would with any other Photoshop file.
    You can now select the Create feature. You will be able add your pictures and resize them, you will be able to add/remove text, you'll be able to change the backgound/borders, add graphics...pretty much anything...EXCEPT automatically modify the layout. If you click on Layout, PE9 returns nothing. You can however go into full edit mode and if you have decent Photoshop skills you can make any changes to the layout manually.
    If I had to put money on this I'd say that there is a problem with the PE9 Mac installation package. For some reason it is not deploying the layout data/files or it is not putting them in the right place. For this reason the program can't find the layouts when the user selects the greeting card guided edit.
    Good luck.

  • When trying to perform updates I get this message. This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. What do I do?

    When trying to perform updates I get this message: This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. What do I do? I just bought the MacBook Pro new and migrated my apps from my old MacBook Pro.

    Perform the following, stopping with the first one which works:
    1. Open the Mac App Store's Purchases tab. If you're prompted to accept them into your Apple ID, do so.
    2. Move them out of the Applications folder(they may need to be put into the Trash temporarily), and then see if you can download them for free from their individual product pages. If you're asked to buy them, see #3.
    3. Click here, contact Apple, and wait for a response.
    4. Buy them.
    (116300)

  • Why is that I am not able to update iPhoto after install os x yosemite?  is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

    "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled"  iPhoto is gone after installing to OS X Yosemite.  Where did it go and how do i get all my pictures back ??
    HELP !!!

    "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled"  iPhoto is gone after installing to OS X Yosemite.  Where did it go and how do i get all my pictures back ??
    HELP !!!
    Did you upgrade to Yosemite, without first updating to iPhoto 9.5.1 in Mavericks? Then updating to 9.6 may not work - it is buggy at the moment.
    If you already own a version of iPhoto 9.x.x, but cannot update iPhoto, try to buy a new version.  When I look at the AppStore, the price has now changed to "Free", so it should not matter if you buy again or update.
    Delete iPhoto from Applications, but do not empty the Trash.
    Go to the first page of the App Store and sign in with your AppleID.
    Search for "iPhoto" using the Search field.
    What does the button below the iPhoto icon show? If it is showing "Free" like for me, click "free" to purchase again.

Maybe you are looking for