Ramifications of upgrade change
In LabVIEW 7.1 I built an application that configured controls on a front panel based on input from an XML file. All the controls on the front panel are initially invisible. As the XML file is read, a control was made visible then modified according to the properties specified in the file. I use the Unflatten From String function to convert the string to a cluster of values to be read by the control's property node. But now I am using LabVIEW 8.6. New properties for controls have been added plus there have been some syntax changes for previous ones. I want to modify my application so that it will read XML files reading 7.1 and 8.6 properties, without interaction from the user. Any ideas on the best way to solve this?
I have the source files for my application. Enclosed are the files used. AddIndicator.vi makes the control visible and adjusts the control's properties as necessary. Load from XML Data.vi reads the control's properties from the XML file. SaveIndicator.vi saves the control's properties to the XML file. All 3 of these VIs use the Flatten/Unflatten From String functions to convert the data.
Attachments:
AddIndicator.vi 49 KB
Load from XML Data.vi 33 KB
SaveIndicator.vi 45 KB
Similar Messages
-
IPod sync problems after hard-drive upgrade/change
Hello all,
Can anyone PLEASE help?
I have just had my hard drive upgraded/changed from the original 640GB drive to a new 2TB drive. I've also had an additional 4GB of RAM added to now give me 8GB RAM.
Absolutely everything else seems to be working fine (unusual for me and I'm often at the end of bad luck in such circumstances). The only thing I'm having problems with is syncing my iPod Classic with iTunes. Incidentally, I have the latest version of iTunes and my iPod software was up to date the last time I checked.
Before I go further, my system specs are:
iMac
24-inch, Early 2009
Processor 2.66 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400 256 MB
Software OS X Mountain Lion 10.8.2 (12C60)
When I connect my iPod Classic, the iPod screen initially shows 'Synchronisation in progress' (or whetver similar wording it actually is)... but this is just very briefly. It then indicates "Connected", and that's the way it stays and doesn't change at all.
It takes time to actually show up in iTunes, and when it does, I now have to very quickly click the iPod button (to bring up the iPod screen on iTunes) before the pointer turns into the spinning beach ball.
Now, it hangs... and hangs... and hangs... and hangs.
During this, I notice that "Manually manage music and videos" is ticked (which I didn't have ticked before), and also 'Enable disc use' is also ticked, although greyed out.
Occasionally, the spinning beach ball will disappear and the pointer will return, but this is very very briefly and I have a split-second to try unticking - first - the "Manually manage music and videos" box and then - later, if I'm lucky - untick the 'Enable disc use' box. However, on the odd occasion I've managed this, I haven't been able to go further except for two occasions when I managed to click "Apply". The iPoid on those to occasions started to update... but went nowhere... it just did nothing.
When the thing finally just hangs and hangs, I eventually have to 'force quit' iTunes and unplug the iPod without first ejecting. There was one other occasion when I managed to - split-second when the spinning beach ball disappeared - to click "eject" and the iPod succesfully did so.
There were a couple of occasions in the past when I had trouble with my iPhone and was told to delete/trash the iPhone photo cache folder. Remembering this, I tried this for the iPod (iPod photo cache) and it made no difference... same situation.
I did notice on one occasion at the beginning of all this that when I managed to unplug my iPod from iTunes, all the album covers were missing from the iPod (although still in iTunes). This was long before I tried deleting the iPod photo cache folder though.
Any help would be greatly appreciated.
Best regards
BionicDanFirst things first the spinning beach ball is usually an indication that Search is going nuts.
Turn off Search entire Library by clicking on the downward pointing arrow to the right of the Magnisying glass and untick Search entire library.
Is your music still in iTunes on your new hard drive or is it only on your ipod?
If it is in your itunes then you should be able to plug in the iPod and uncheck Manually Manage music and sync
If the music is only on the ipod connect up as above click on the device and Drag all the music from your device to the library. then you can uncheck manually manage music and sync as normal -
This is very weird, after upgrading, the track names in iTunes, TV Shows, Music and others changed to Chinese characters and wingding characters...not all of them though, just the visible ones so when I scroll I still have regular English names....very strangely, these incorrect names are also visible on AppleTV, I guess it takes the names straigh of my Air....anybody any idea how to fix this...it happended after restarting iTunes after the upgrade....
May 24, 2012, further update.
I had my pst file copied from Outlook 2007 and installed on a test computer with iTunes 10.1.6 and the calendar sync occurred no problem
My techie, then basically said it was some registry files on the desktop that must be corrupted and he deleted them with a program.
He is back tomorrow for futher testing I will keep you informed -
For the past couple of weeks now I've been plagued with the
problem of not being able to properly upgrade my flash player to
version 9. I'd get pass the installation, sure, but they'd be
corrupted installations. I can't view some flash websites and they
keep telling me to install flash player, even when I have version
9! At least that's what the computer is telling me.
After scouring all over the internet for similar problems,
I've noticed more and more correlations between these cases.
Another dilemma plagued me soon after, I realized I couldn't change
my homepage as well!
Then I read the different cases of other people and what was
striking was that they seemed to all use ZoneAlarm firewall
products. I soon find that the new OS firewall feature of the
product is the suspect.
For those ZoneAlarm firewall users (specifically with the
retail versions with the OSFirewall feature), OSFirewall might be
locking your internet settings, startup programs, host file, but
most importantly, your ActiveX files! Zone Labs included this
feature to make the product that much more hardheaded, but they
don't realize that we, the users, need these files as well.
The fix is easy. Just navigate to Program Control in
ZoneAlarm (I'm using Pro). In the Main tab, you should see "Program
Control" options. Below that, there is a "Custom" button. Click
that and navigate to the "OSFirewall" tab. Viola! There's those
turds. Left clicking on the second column of the options will give
choices of permission. If you want to make sure that this
superfluous feature doesn't mess your settings again, I suggest you
give all of them "Allow" (check marks) permissions.
NOTE: Even if you disable "Program Control" or OSFirewall,
you still need to enable OSFirewall and change the permissions.
That's because the settings of permission will still be locked to
the current ones. Basically, even if you disable OSFirewall and
have the setting "Install ActiveX" as deny, it's still in denial
permission. Check Marks all the way.
If you still experience problems, and you still feel that
ZoneAlarm is causing the problems, I suggest you go the "Programs"
tab of Program Control. There, you can view all the applications
you've ran your PC. Search "Macromedia" or "Flash" related files
and give them all acces to the internet and full permissions. If
you're not sure, Delete all of the non-Microsoft programs listed to
reset those settings. When you install Flash Player again and you
see the permission requests, just "Allow" them.
P.S. OSFirewall is not available on the free version of
ZoneAlarm. Also, to make sure that ZoneAlarm is causing the
problems, run a comprehensive spyware and anti-virus scan. Most of
the time malware causes these problems as well. Happy
Computing!Check
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968
[topic moved to Flash Player forum] -
Oracle 11.2.0.3.0 Database Upgrade changes DATA_PUMP_DIR
Along with existing RMAN backups we do Exports - of our DB using and OS User and Oracle Wallet.
Of the DB's we have upgraded the Data Pump Directory
Select * from dba_directories; (there are other commands to get this info as well).
I captured screens from the DBUA upgrades, but did not see an option to change this information.
Is there a way to feed this information to the install moving forward. IE, ./DBUA -silent ?
Also, anyone tracked the percentage of storage increase from 10.2/11.1 to 11.2.
All the ones we did grew, so be aware.
Thanks in advance!Are you stating that the upgrade process is changing or resetting data in DBA_DIRECTORIES ? It should not - if you have documented this experience, pl report it to Support - it may be a known bug or a new one.
The increase in size of the database should only be restricted to SYSTEM and SYSAUX tablespaces (and possibly TEMP and UNDO), but user tablespaces should see no increase.
HTH
Srini -
ERP Upgrade: Changes in Reporting in new version ECC6.0
Hi Gurus,
We are just in upgrade process from 4.7c to ECC 6.0. During the test we ascertained that there are certain changes happened in the reporting functions und the reports are not showing some necessary fields in new version. For instance the reports RFDOPO00 and RFKOPO00 are replaced by RFDEPL00 and RFKEPL00 in ECC 6.0, which do not show some important fields of old report. SAP says they are standard reports in ECC 5.0 /6.0.
How can we maintain old reports (in general, not specifically these above mentioned reports) from 4.7c in our new upgraded system ahead instead of new reporting standard of ECC6.0.
Please tell me the steps to solve this problem.
Regards
SIMNo, there is slightly difference in reporting between both versions ERP 4.7C and ECC 6.0. For instance in old version 4.7c we can produce reports (RFDOPO00 and RFKOPO00) with Subtotal and Total by currency by making check mark on both these items. In new version this items has been removed. There are also some more items which are not offered by SAP in new version.
As we have decided to keep some old reports in new system, Can you therefore please tell me how we can keep the old reports in new version? -
Hi there!
I´d like to upgrade my CS5 master collection (german version) to CS6 (english version). Is that possible or are there problems changing the languange of an upgrade?
greetings & many thanks!
p.You'd have to contact Adobe directly to get information regarding pricing differences... it might be that pricing differences are geographical in nature and you'll pay the same price based on that.
Here are some links to help make contact:
http://www.adobe.com/support/chat/ivrchat.html
http://www.adobe.com/support/download-install/supportinfo/
If the English versions are much cheaper, and you say you want the English version, not the German, why would you buy the cheaper (English) versions and then swap it for a different language? If anything sounds suspiscious...... *cough* -
ECC 6.0 Upgrade & changes required in programs
In case of a version upgrade to ECC 6.0, the programs would need to be changed. Some changes in the programs would be required to meet unicode compliance, while some changes would be required due to version upgrade (constructs becoming obsolete, etc). I guess the unicode related issues could be found by using the UCCHECK transaction and then resolved by making changes and again checking using this transaction, but is there some way to find out what issues would arise due to version upgrade? (The programs work fine in the lower version which is 4.6c). One way would be to actually check the programs in runtime and then handling the issues faced. But if we don't want to test all the programs, then is there some tool, or any best practice which would minimize the chance of having issues in the programs (and might be in help in solving the issues)?
SAMT is a transaction that will allow you to create sets for syntax check. We generally do it for Z* and Y* objects if the count does not exceed 3000.
Batch objects are the BDCs and Conversions as explained by Hema. Earlier upgrades had more than 80% of these objects failing becuase the screens may have changed or the screen fields may be missing, screen flow changed ... But now it has reduced especially from 46c to Ecc6 upgrade. However it still warrants testing them thoroughly.
Clones are copies of standard SAP objects in Z space and modified. These objects generally tend to have standard includes within them or the program definition may still have the original SAP name. It is tricky to find all of them but simple rules like matching name strings (eg SAPMV45A -> ZAPMV45A or Z_SAPMV45A) would help. It may vary from customer to customer depending on their naming standards.
Standard function modules used in the program can be easily found out using SCAN command in ABAP (see my example for SCAN in code snippets). Use the list of function modules identified and pass to the program below to see if their interfaces have changed. Test all objects affected by changed interfaces.
*& Report YACN_FUNC_ANALYSIS
REPORT YACN_FUNC_ANALYSIS.
Tables: tfdir.
DATA: v_found TYPE c.
DATA: v_func LIKE enlfdir-funcname.
DATA: BEGIN OF i_import OCCURS 0.
INCLUDE STRUCTURE rsimp.
DATA: END OF i_import.
DATA: BEGIN OF i_changing OCCURS 0.
INCLUDE STRUCTURE rscha.
DATA: END OF i_changing.
DATA: BEGIN OF i_export OCCURS 0.
INCLUDE STRUCTURE rsexp.
DATA: END OF i_export.
DATA: BEGIN OF i_table OCCURS 0.
INCLUDE STRUCTURE rstbl.
DATA: END OF i_table.
DATA: BEGIN OF i_exceptions OCCURS 0.
INCLUDE STRUCTURE rsexc.
DATA: END OF i_exceptions.
DATA: BEGIN OF i_doc OCCURS 0.
INCLUDE STRUCTURE rsfdo.
DATA: END OF i_doc.
DATA: BEGIN OF i_source OCCURS 0,
INCLUDE STRUCTURE RSSOURCE.
line(256) TYPE c,
END OF i_source.
DATA: BEGIN OF e_import OCCURS 0.
INCLUDE STRUCTURE rsimp.
DATA: END OF e_import.
DATA: BEGIN OF e_changing OCCURS 0.
INCLUDE STRUCTURE rscha.
DATA: END OF e_changing.
DATA: BEGIN OF e_export OCCURS 0.
INCLUDE STRUCTURE rsexp.
DATA: END OF e_export.
DATA: BEGIN OF e_table OCCURS 0.
INCLUDE STRUCTURE rstbl.
DATA: END OF e_table.
DATA: BEGIN OF e_exceptions OCCURS 0.
INCLUDE STRUCTURE rsexc.
DATA: END OF e_exceptions.
DATA: BEGIN OF e_doc OCCURS 0.
INCLUDE STRUCTURE rsfdo.
DATA: END OF e_doc.
DATA: BEGIN OF e_source OCCURS 0,
INCLuDE STRUCTURE RSSOURCE.
line(256) TYPE c,
END OF e_source.
DATA: BEGIN OF i_tab OCCURS 0,
line(71) TYPE c,
END OF i_tab.
PARAMETERS: p_file LIKE rlgrap-filename DEFAULT 'D:\Documents and Settings\prakash.bhatia\Desktop\funcmods.txt'.
START-OF-SELECTION.
CALL FUNCTION 'UPLOAD'
EXPORTING
CODEPAGE = ' '
filename = p_file
filetype = 'DAT'
ITEM = ' '
FILEMASK_MASK = ' '
FILEMASK_TEXT = ' '
FILETYPE_NO_CHANGE = ' '
FILEMASK_ALL = ' '
FILETYPE_NO_SHOW = ' '
LINE_EXIT = ' '
USER_FORM = ' '
USER_PROG = ' '
SILENT = 'S'
IMPORTING
FILESIZE =
CANCEL =
ACT_FILENAME =
ACT_FILETYPE =
TABLES
data_tab = i_tab
EXCEPTIONS
CONVERSION_ERROR = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
GUI_REFUSE_FILETRANSFER = 6
OTHERS = 7
LOOP AT i_tab.
v_func = i_tab-line.
select single * from tfdir where funcname = v_func.
if sy-subrc <> 0.
continue.
endif.
PERFORM get_func_details TABLES i_import
i_changing
i_export
i_table
i_exceptions
i_doc
i_source
USING ' ' v_func.
PERFORM get_func_details TABLES e_import
e_changing
e_export
e_table
e_exceptions
e_doc
e_source
USING 'D02' v_func.
WRITE:/ v_func.
CLEAR v_found.
IF i_import[] = e_import[].
WRITE: 'N'.
ELSE.
LOOP AT i_import.
READ TABLE e_import WITH KEY parameter = i_import-parameter.
IF sy-subrc <> 0.
IF i_import-optional <> 'X'.
WRITE: 'Y'.
v_found = 'X'.
EXIT.
ENDIF.
ELSE.
IF i_import-typ <> ' '.
IF i_import-typ <> e_import-dbfield.
WRITE: 'Y'.
v_found = 'X'.
EXIT.
ENDIF.
ELSE.
IF i_import-dbfield <> ' '.
IF i_import-dbfield <> e_import-dbfield.
WRITE: 'Y'.
v_found = 'X'.
EXIT.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
IF v_found = ' '.
WRITE: 'N'.
ENDIF.
ENDIF.
CLEAR v_found.
IF i_changing[] = e_changing[].
WRITE: 'N'.
ELSE.
LOOP AT i_changing.
READ TABLE e_changing WITH KEY parameter = i_changing-parameter.
IF sy-subrc <> 0.
IF i_changing-optional <> 'X'.
WRITE: 'Y'.
v_found = 'X'.
EXIT.
ENDIF.
ELSE.
IF i_changing-typ <> ' '.
IF i_changing-typ <> e_changing-dbfield.
WRITE: 'Y'.
v_found = 'X'.
EXIT.
ENDIF.
ELSE.
IF i_changing-dbfield <> ' '.
IF i_changing-dbfield <> e_changing-dbfield.
WRITE: 'Y'.
EXIT.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
IF v_found = ' '.
WRITE: 'N'.
ENDIF.
ENDIF.
CLEAR v_found.
IF i_export[] = e_export[].
WRITE: 'N'.
ELSE.
LOOP AT i_export.
READ TABLE e_export WITH KEY parameter = i_export-parameter.
IF sy-subrc = 0.
IF i_export-typ <> ' '.
IF i_export-typ <> e_export-dbfield.
WRITE: 'Y'.
v_found = 'X'.
EXIT.
ENDIF.
ELSE.
IF i_export-dbfield <> ' '.
IF i_export-dbfield <> e_export-dbfield.
WRITE: 'Y'.
v_found = 'X'.
EXIT.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
IF v_found = ' '.
WRITE: 'N'.
ENDIF.
ENDIF.
CLEAR v_found.
IF i_table[] = e_table[].
WRITE: 'N'.
ELSE.
LOOP AT i_table.
READ TABLE e_table WITH KEY parameter = i_table-parameter.
IF sy-subrc <> 0.
IF i_table-optional <> 'X'.
WRITE: 'Y'.
v_found = 'X'.
EXIT.
ENDIF.
ELSE.
IF i_table-typ <> ' '.
IF i_table-typ <> e_table-dbstruct.
WRITE: 'Y'.
v_found = 'X'.
EXIT.
ENDIF.
ELSE.
IF i_table-dbstruct <> ' '.
IF i_table-dbstruct <> e_table-dbstruct.
WRITE: 'Y'.
v_found = 'X'.
EXIT.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
IF v_found = ' '.
WRITE: 'N'.
ENDIF.
ENDIF.
IF i_exceptions[] = e_exceptions[].
WRITE: 'N'.
ELSE.
WRITE: 'Y'.
ENDIF.
*if I_doc[] = e_doc[].
write: 'N'.
*else.
write: 'Y'.
*endif.
IF i_source[] = e_source[].
WRITE: 'N'.
ELSE.
WRITE: 'Y'.
ENDIF.
ENDLOOP.
*& Form get_func_details
text
-->P_TRG text
FORM get_func_details TABLES t_import
t_changing
t_export
t_table
t_exceptions
t_doc
t_source
USING p_trg
p_func.
CALL FUNCTION 'RPY_FUNCTIONMODULE_READ'
DESTINATION p_trg
EXPORTING
functionname = p_func
IMPORTING
GLOBAL_FLAG =
REMOTE_CALL =
UPDATE_TASK =
SHORT_TEXT =
FUNCTION_POOL =
TABLES
import_parameter = t_import
changing_parameter = t_changing
export_parameter = t_export
tables_parameter = t_table
exception_list = t_exceptions
documentation = t_doc
SOURCE = t_source
EXCEPTIONS
ERROR_MESSAGE = 1
FUNCTION_NOT_FOUND = 2
INVALID_NAME = 3
OTHERS = 4
ENDFORM. " get func details
-Cheers -
I use TD Waterhouse Webbroker, which has links to PDF documents. These links have always opened - that is until I "upgraded" to the latest Firefox version (I think it's 4.0). Now those same PDFs do not open. I cross-checked with the arch enemy, Internet Explorer. Those same PDFs opened in Internet Explorer. So Firefox, what did you do in the latest "upgrade" that has altered the way the browser handles PDF files on Webbroker??
Hi tlaclair, when I click that link, here is what I see (observed using the Fiddler2 program, which intercepts web traffic between your browser and websites):
(1) The server at link.p0.com sets 1 cookie and redirects to http://t.mookie1.com/t/v1/event?migClientId=181&migAction=email-click&migSource=mig&migDest=http%3a%2f%2forder.dominos.com
(2) Firefox follows the redirect and the server at t.mookie1.com sets 3 cookies and redirects to http://order.dominos.com
(3) Firefox follows the redirect and the server at order.dominos.com redirects to a secure session ([https://order.dominos.com/])
These kinds of redirects are completely standard; if you set Firefox to warn you about redirects, then a bar usually appear below the address where you can click an Allow button to continue. You can check whether you have this feature turned on here:
orange Firefox button ''or'' classic Tools menu > Options > Advanced > General
If Firefox isn't blocking the redirect, it's possible that one of your add-ons is doing it. A standard diagnostic for interference by add-ons is to try Firefox's Safe Mode.
First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, restart Firefox in Firefox's Safe Mode ([[Safe Mode]]) using
Help > Restart with Add-ons Disabled
In the Safe Mode dialog, do not check any boxes, just click "Continue in Safe Mode."
If the link works correctly, this points to one of your add-ons or custom settings as the problem.
Any change? -
10.5.6 upgrade changes AFP admin sharing
A posting from a few months ago asked about how to allow AFP access to root directories instead of share points, and this article was mentioned about changing the admin31GetsSp pref: http://support.apple.com/kb/TS2255 While the article was written for server 10.4, I tried it and it worked for 10.5 (which is what I'm running). Fast forward to last night, when I applied the 10.5.6 upgrade on my server.
Now when I try to log in via AFP (from a 10.5.6 client) with an admin account, I'm still presented with the volumes on the server, not the sharepoints, BUT once I mount the volume, I can no longer see the sharepoints on that volume!
e.g. volume "A" has sharepoints "share 1" and "share 2." Before the 10.5.6 upgrade, I would mount volume "A" on my client and have access to every folder on that volume, including shares "1" and "2". After 10.5.6, I still mount volume "A", and can access every folder on the volume except shares "1" and "2." In fact, those folders aren't even visible! (And yes, the local admin login I'm using is a member of the groups that have access to all sharepoints).
Thanks!
EdI am setting up a new 10.5.6 Server and just noticed this. I have admin31GetsSp = no. When I connect (AFP) I get the list of volumes. When I mount the volume containing my sharepoints I usually see only one of the seven sharepoints I should see. If on the client machine I use the Finder 'Go to folder' and enter the path (/Volumes/etc....) I can get to the sharepoints. Even weirder is to open a terminal window on the client, cd to the mounted volume and do an ls. I see five identical copies of one of the sharepoint folders. I can cd into the folders which should be there but don't show up. For example on my machine, with the 'lacieraid' volume from my server mounted as an admin:
tribble:/volumes/lacieraid rhaines$ ls -l
total 112
drwxr-xr-x 72 rhaines rhaines 2404 Jan 6 15:55 toarchive
drwxr-xr-x 72 rhaines rhaines 2404 Jan 6 15:55 toarchive
drwxr-xr-x 72 rhaines rhaines 2404 Jan 6 15:55 toarchive
drwxr-xr-x 72 rhaines rhaines 2404 Jan 6 15:55 toarchive
drwxr-xr-x 72 rhaines rhaines 2404 Jan 6 15:55 toarchive
tribble:/volumes/lacieraid rhaines$ cd pub
tribble:/volumes/lacieraid/pub rhaines$ ls
Callie Josh NRoberts Network Trash Folder TheVolumeSettingsFolder
Now 'pub' is one of the sharepoints in my lacieraid volume. I don't know if this happened with any previous version of 10.5 server because I didn't stop off at the earlier versions long enough to notice this. It would be nice to know that this is a bug affecting only volumes mounted by admins. -
Upgrade Change History (Process Purchase order)
HI All,
We have upgraded our system from SRM_SERVER 550 SAPKIBKT10 to SAPKIBKT12 (10 to 12)
Is there any way to see what changes happened in the "Process purchase order" screen after upgrade
i.e old history and new changes
Thx
Jaitransaction code :SO99
got the required information
Thx
Jai -
Upgradation Changes in HR Module
Hii Experts,
For our Company, we are upgrading SAP from 4.7 to ECC 6.0.
Being on the functional side i just want to know that what will be the changes or the impact of the upgradation on the HR Module including Personnel Administration, Payroll, Time Management, ESS, Training and Event Management so that it will help me after the upgradation.
Thanks,
Regards,
Nidhi KhandelwalUpgrades can be classified as Technical & Functional
In technical, it is purely technical update and we do not enable /use new features which come with new version.
In Functional after technical upgrade, you also do necessary steps to enable the new features.
Irrespective of the upgrade, you need to do a good regression testing to ensure things worked in he past continue to work.
If you have functional upgrade, then you need to identify the features you are gonna use, then plan for spro setting / additional testing / uat / training etc. -
Upgrade changes from 4.7 to ECC 5.0 in HR
Hi Experts,
Can somebody give an idea on changes that took place while upgrading from 4.7 to ECC 5.0?
1. What are the major uni-code changes that we have in ECC 5.0 compared to 4.7? I know the unicode check is present in 4.7 too (like WS_UPLOAD & WS_DOWNLOAD are obsolete) But are there any major unicode checks that we have to deal with while upgrading to 5.0?
2. Are there any specific screen flow changes that we need to make a note for HR module?
3. Any changes that can be found from using transactions SPDD and SPAU?
Any reply would be really appreciated...
Thanks in Advance,
RVSS.> Can somebody give an idea on changes that took place while upgrading from 4.7 to ECC 5.0?
http://solutionbrowser.erp.sap.fmpmedia.com
http://service.sap.com/releasenotes
> 1. What are the major uni-code changes that we have in ECC 5.0 compared to 4.7? I know the unicode check is present in 4.7 too (like WS_UPLOAD & WS_DOWNLOAD are obsolete) But are there any major unicode checks that we have to deal with while upgrading to 5.0?
Upgrade and Unicode conversions are two different things.
You may read
Note 367676 - Release upgrade from 4.6 to 6.10 for customer programs
Note 689951 - Release upgrade from 6.20 to 6.40 for customer programs
> 2. Are there any specific screen flow changes that we need to make a note for HR module?
check the corresponding release notes in
http://service.sap.com/releasenotes
> 3. Any changes that can be found from using transactions SPDD and SPAU?
What do you mean? Those transaction are for the technical modification adjustment.
Markus -
Lion upgrade changed my User Directory (Name Name 1) Help!
Can any one offer a fix.
I tried to install Te Lion Upgrade and it stalled at the last step.
After waiting 4 hours I did a restart and Lion asked me if I want to restore from an archive.
I said yes, but my user group was renamed from Jimmy to Jimmy 1
Most things work and it seems everything is there, bit some apps are not working because they are looking for the Jimmy folder (path).
Is there anyway I can change this back to the way it was (Jimmy)?
Can I rename the folder in terminal or make a new folder - and what will happen with my username (which wasn't changed) and everything in the keychain? No to mention permissions.
Can anyone point me into the right direction or have step on how to solve this?
Much appreciated.I have a similar problem - I need to change my account (short) name so that I can backup both my old computer and new computer on timecapsue independently. However, the link you provided is only for 10.6 and earlier, not for Lion. Are the instructions for Lion similar? For one, I have no directory utility on Lion.
Thanks for your help. -
I need to know what changes are made during a release upgrade (11gr1 - r2). Where would I find the documentation on this?
My main question: Does this upgrade just the oracle system table spaces, or does it change your application tablespaces as well?Pl see the new features guide for 11gR2 - http://docs.oracle.com/cd/E11882_01/server.112/e22487/toc.htm
The upgrade does not make any changes to application/custom objects.
HTH
Srini
Maybe you are looking for
-
How to handle a lot of menuitems.
Hi, I am in need of a solution that can handle a lot of menuitems on a mobile device. My vision: At the bottom of the screen there is always a Menu button. When clicked a list pops up above it and the background fades. Looking for something like the
-
My daughter and I have separate iCloud accounts set up on out desktop PCs and our iPhones and iPads. We want to share the usage of a Win 8 laptop and will log in using using separate user accounts. Is it possible to set up our own iCloud accounts in
-
Using editor for multiple cells in JTable
Hi, Here is my requirement - On clicking any column of a particular row in a JTable, a pop-up window containing the cells of that row will be displayed as JTextFields for the user to enter the value and on pressing OK, the entered values should be se
-
I can't install a program from dvd, finder tells me the dvd is empty...
Hi all, i recently restorted my laptop to original fabric configuration. now if have reinstall all my software thats bin removed. some dvd's work but some don't. i insert the dvd and de disk drive starts working for a while but then it sort of shuts
-
Connecting electic keyboard to garage band
Hey I am having trouble connecting my Yamaha electric keyboard to garage band. I have the right cable, and it does recognize it. but when i play more than one note at a time it only lets one note sound, and creates a low humming noise. Any thoughtful