Random images in flash

does anyone know how to make a random image viewer in flash from scratch
as in click a button then it will take you to a picture then click it again and it will take you to a different one
so the images dont come up twice, or does anyone know any tutorials with the same sorta thing

This might help - I had to go through this quite carefully before I understood it - the ab
stract variable names make it much more difficult to understand. here is my version with more obvious var names:
//creates original array with numbers you want to randomise
var orgArr:Array = [1,2,3,4,5];
trace("original numbers = "+orgArr);
//The function that shuffles the numbers. the argument passed (in parenthesis) is the array of ascending numbers (orgArr) it is named 'inArr' for use by the function, but it is exactly the same array
function shuffle(inArr:Array) {
//creates numeric variable that is the length of the original array
    var arrLen:Number = inArr.length-1;
//a loop that runs through each element in the array starting at the highest position down to zero
    for (var i:Number = arrLen; i>=0; i--) {
        //generates random integer based on length of array
        var rndNum:Number = Math.floor(Math.random()*(i+1));
        //gets data from array corresponding to loop number (i)
        var arrData = inArr[i];
        //swaps array slot i with data from random position in the same array
        inArr[i] = inArr[rndNum];
        //swaps random array slot with data from array slot i
        inArr[rndNum] = arrData;
shuffle(orgArr);
trace("shuffled numbers = "+orgArr);
The function cycles through the original array and swaps each array element with another element randomly chosen from the same array. If you run this code the output window will show the original numbers and then the array after it has been shuffled. The numbers could be frame numbers of your pics or filenames for externally loaded content.
Thanks for that code Kglad - a neat solution and much simpler that the code I wrote to do the same thing.

Similar Messages

  • Load Random Image in Flash?

    I've googled it and searched this forum. No luck.
    Does anybody know how to load a random image in flash. Like
    on a welcome screen (i.e. the first thing that shows up in my
    timeline with a stop command on it)
    I tried this:
    http://www.kirupa.com/developer/mx/loadingrandombackground.htm
    but can't do this where you are supposed to paste the code in
    Actions: "Now, look at your timeline. Right click on a blank
    keyframe in the timeline and select Actions. Copy and paste the
    following code: "
    seems like i have to add something first like adding a
    behavior like "goto URL" or "stop" or "goto frame" if you know what
    i mean.
    what do i click on???????????????????? to add this code into
    Actions.
    Thanx.

    let say you have 20 images file in jpg format, all at the
    same directory with your flash file, with file name as below:
    pic1.jpg
    pic2.jpg
    pic20.jpg
    in your flash, select the frame which you wan to load a
    random image, type script below:
    num = Math.ceil(10*Math.random());
    filename = "pic" + num + ".jpg";
    _root.createEmptyMovieClip("pic_mc", 1);
    loadMovie(filename, "pic_mc");
    //good luck

  • Randomizing image/text on refresh

    Hello. I'm new...quite new to DW and web work, but have a small, general understanding of it. I'm an animator and am in the midst of creating my own portfolio site. I don't understand code, at least uber-extreme code. I'm attempting to have specific quotes on my homepage from clients and would like to have them change, or have a new text/quote appear on refresh or upon a new visit to the site (just so it's not the same one everytime).
      Would I need to just render out a .swf file in AE or is there a means of doing this within DW w/o using crazy code? Thanks in advance, Andy

    HTML has no way to do something like this.  You would indeed have to use Flash, or JavaScript, or some server-scripting to accomplish that task.
    It's quote easy to do with something like PHP, for example, by declaring a random variable in the page, e.g.,
    <?php
    $imageVar = rand(1,5) /* this will generate a random number between 1 and 5 */
    ?>
    and then using that random variable in the image's source attribute -
    <img src="images/random/image<?php echo $imageVar; ?>.jpg" />
    If you are getting the idea that you will have to come to grips with code sooner rather than later, then you are on the right track.  DW is very punishing to those who won't take the time to learn the underlying technologies....
    If you Google "random image" and "Dreamweaver" you may also be able to find extensions that do the same thing for you (in JavaScript).  I would recommend that you visit http://www.projectseven.com and search there - I do know that they have such a thing, and can wholeheartedly endorse their products as being the best of show....

  • Load a image in flash format

    Hi all,
    Does anyone know how to load a image from a file (in .swf format) to the java.awt.Image object. If anybody knows how to do this plzzzz help me to get rid of this damn thing.
    With regards
    Nuwan

    let say you have 20 images file in jpg format, all at the
    same directory with your flash file, with file name as below:
    pic1.jpg
    pic2.jpg
    pic20.jpg
    in your flash, select the frame which you wan to load a
    random image, type script below:
    num = Math.ceil(10*Math.random());
    filename = "pic" + num + ".jpg";
    _root.createEmptyMovieClip("pic_mc", 1);
    loadMovie(filename, "pic_mc");
    //good luck

  • How to upload a image or flash file as blob object in a table.

    How to upload a image or flash file as blob object in a table.
    What are all the possible ways we can do it.

    Searching the forum (or google) would be my first choice, as this question pops up every now and then.
    Next without knowledge of your environment (jdev version and technology stack) it's hard to give a profound answer.
    All I can say is that it's possible.
    Timo

  • The Image viewer flash element could not be found

    The image viewer flash element could not be found. What
    should I do? Any plug in exists or is it mistake in program? Help
    me, please. Thx Joe

    Hi,
    The issue here is the mapping of the interface to the service in question, and usually points to a possible mistype or rename of something within your service architecture.
    You need to make sure your namespace and service name here match your service name itself.
    For detailed information, you could refer to:
    https://haddicus.wordpress.com/2011/06/06/service-attribute-value-not-found-wcf-services/
    http://stackoverflow.com/questions/9557221/the-type-restservice-weddingservice-provided-as-the-service-attribute-value-i
    Regards

  • Random images display strong yellow/green cast

    system - 24" intel iMac, 3ghz, 2gb, 500bg hd, NVIDIA GeForce 8800 GS with 512MB memory, OS 10.5.4. Just purchased.
    System runs fine, and I love the machine. Problem is random images, jpegs, raw, illustrator files, display an awful yellowish tint, both in the preview and when opened in PS or preview. Just random, sometimes a whole folder of images, sometimes just a few. I, of course tested some of the same images on another mac, and they viewed correctly. If I save a copy to the desktop, the icon looks correct, but when opened it looks like puke. Also happens in front row when displaying certain album covers and video trailer art.
    Anyone else run into this?
    -h

    Hello Double H Media
    Welcome to Apple Discussions!
    Unfortunately the OP and others appear to have the same issue possibly related to the GeForce 8800 GS, see the following thread!
    http://discussions.apple.com/thread.jspa?messageID=7224138&#7224138
    Dennis

  • How to make a link to an image in flash?

    Hi,
    I´m new in Flash CS3 and I´m trying to get some
    answers to my problem.. The question is
    that how do I create a link to an image in flash??
    I know how to make a link to a text field but I really
    don´t know how this could get working properly.. :/

    Link to an external URL image? In AS 2 the code is
    'getURL("putaddresshere")' and in AS 3 it's 'navigateToURL("")' ...
    If it's a simple image, it's easier just to import it to the
    stage, save it as a symbol, put it in a timeline frame and then
    code your link so on click or rollover it goes
    'gotoAndPlay(framenumber)'.

  • When opening a folder with "items as icons" view, a millisecond fast random image appears in place

    Hi,
    since I updated to Yosemite (but cannot assure it's related or started exactly that moment) I've been experienced a weird issue.
    When I open a folder to navigate it, and it's set on "show items as icons", I see all the icons, for just less than a second, replaced by random images.
    It's like if while the proper folder/file icon it's loading, that space is temporarily occupied by the impression of another one (or parts of it), coming from my computer. Sometimes is a photo, sometimes another folder icon not related, sometime is the icon of a software.
    The picture then goes away (it stays less than a second) and the icon for the file/folder is then the appropriate one.
    I have a Macbook Pro 15-inc, mid 2010.
    Is it a known issue? If yes, how can I solve, if possible, this?
    Hope can be helpful to others too.
    Many Thanks

    First off, I do not recommend looking at your time machine while it is running.  You can tell if it is running by making sure its menubar icon is shown in Apple menu -> System Preferences -> Time Machine.  If the icon is moving, it is running.   You can manually backup, which I recommend over automatic backup, as automatic backup can get in your way.   Spotlight, if it is indexing (check the menu in the upper right that looks like a magnifying glass), will also slow matters down, and adding things you don't want Spotlight to search to your Apple menu -> System Preferences -> Spotlight -> Privacy pane will help.  Note this affects areas you can search in Time Machine as well.  If searching content of files is of little interest to you, I find Find Any File much quicker for finding by file name.   Backup when you aren't doing anything else, as otherwise, you may find yourself backing up files that haven't had the opportunity to close.
      Time Machine also works best if your destination drive is at least twice as capacious as your source drive.   Otherwise it is spending a lot of time trying to find places for the archived files, and barely is more archival than a simple clone.

  • Scrolling Text and Images in Flash CS3

    I am pretty new to Flash and I have spent all day trying to
    look up tutorials on making it possible to scroll text and images
    in Flash but none of them are working for me. I know you save the
    content into a movie clip but that's as far as i have gotten. would
    anyone be able to walk me through this PLEASE???
    Thanks,
    Peter

    You could use a Swing HTMLPANE or draw it all onto a
    BufferedImage and display that (code posted under 2D graphics thread).
    MArk

  • Text editable in images in flash Please help

    Hello
    Dear All Friends
    I want to make text editable in images in flash to get copy from text
    can i Make this
    and other question please
    can i convert text in image in flash to normal string ?
    please help
    Thank you

    Images do not store text data in any isolateable manner, it is comprised of just pixels like anything else in the image.  You would need to develop some form of complicated text recognition program to be able to extract text from an image, and I don't believe anyone has.

  • Hello from a new member and help with random images on refresh

    Hi All,
    I've just joined the forum. In fact I've really only just started to use Dreamweaver. I've covered a lot of ground in the last few weeks and
    have manage to set up a basic site using CSS for layout but now I've hit my first problem.
    On the index page of the site - http://www.hcadesign.co.uk/ there is a large main image which I would like to change each time someone
    visits the site or hits refresh. I've hunted around and found lots of scripts, all using java, that seem to do just this but I'm not having any
    luck getting them to work.
    My pages code is as follows -
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
    <title>Humphrey Cook Associates - Architects - Interior Designers - Project Managers</title>
    <link href="styles/hca_styles.css" rel="stylesheet" type="text/css" media="screen" />
    </head>
    <body>
    <div id="wrapper">
      <div id="header"><img src="images/header.gif" width="800" height="100" alt="hca_header" /></div>
      <div id="menu">
        <ul>
          <li>About Us</li>
          <li>Residential </li>
          <li>Special Needs Housing</li>
          <li>Hotels</li>
          <li>Conservation</li>
          <li>Interiors</li>
          <li>Offices</li>
          <li>Sustainability</li>
          <li>Commercial</li>
          <li>News</li>
          <li>Contact</li>
        </ul>
      </div>
      <div id="main_image"><img src="images/haydock_atrium_420x300.jpg" width="420" height="300" alt="haydock_atrium" />
      </div>
      <div id="menu_right">
        <h3>Latest News</h3>
        <p>Planning permision finally granted for the proposed 'Villa De France'</p>
        <div id="news_image_01">
          <p><img src="images/news_villa_de_france_90x50.jpg" alt="villa_de_france" width="90" height="50" /></p>
        </div>
        <p>Application submitted for new 30 storey hotel with retail in Tower Hamlets</p>
        <div id="news_image_02"><img src="images/news_alie_St_90x50.jpg" width="90" height="50" alt="alie_street" /></div>
      </div>
      <div id="spacer"></div>
      <div id="bottom_left"><img src="images/riba_logo_127x67.gif" width="127" height="67" alt="riba_logo" /></div>
      <div id="bottom_thumb_01"><img src="images/thumb_beckton_95x67.jpg" width="95" height="67" alt="beckton" /></div>
      <div id="bottom_thumb_02"><img src="images/thumb_edgeworth_link_95x67.jpg" width="95" height="67" alt="edgeworth" /></div>
      <div id="bottom_thumb_03"><img src="images/thumb_tov_bathroom_95x67.jpg" width="95" height="67" alt="haydock" /></div>
      <div id="bottom_thumb_04"><img src="images/thumb_edgeworth_interiors_portrait_95x67.jpg" width="95" height="67" alt="the_old_vicarage" /></div>
    <div id="bottom_right">
      <h1>Architects</h1>
      <h1>Interior Designers</h1>
      <h1>Project Managers</h1>
    </div>
      <div id="footer"></div>
    </div>
    </body>
    </html>
    I've highlighted where the image to be rotated is in red.
    The scripts I've found have generally involved putting something in the <head>, something where the image is to be (but I wasn't sure if it should be
    within the div tag or after img src or what?) and also a seperate *.js file stored in the root directory.
    Anyway I'm not getting anywhere and need some help as I really don't know what I'm doing with javascript.
    Cheers

    Hi and Welcome to the DW Forums. 
    For the sake of clarity, Java is not the same thing as JavaScript. 2 entirely different programming languages.
    Copy and paste the following code into a new, blank HTML page.
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
    <title>Random Banner</title>
    <script type="text/javascript">
    <!--//Random Banner image on Page Reload 
    //store the images in arrays below.
    //First banner is always image [0].
    //If you add more banners images, change the array count (4).
    images = new Array(4);
    images[0] = "<a href='http://www.example.com'>
    <img src='path/first-image.jpg' width=' ' height=' ' alt='some-description' /> </a>";
    images[1] = "<a href='http://www.example.com'>
    <img src='path/second-image.jpg' width=' ' height=' ' alt='some-description' /> </a>";
    images[2] = "<a href='http://www.example.com'>
    <img src='path/third-image.jpg' width=' ' height=' ' alt='some-description'  </a>";
    images[3] = "<a href='http://www.example.com'>
    <img src='path/fourth-image.jpg' width=' ' height=' ' alt='some-description'  </a>";
    index = Math.floor(Math.random() * images.length);
    document.write(images[index]);
    //done
    // -->
    </script>
    </head>
    <body>
    <h1>Random Banner on Page Load.</h1>
    <p>The more images you have in your array, the more random it will seem.</p>
    <p>Change the URLs from example.com to your your own site pages.</p>
    <p>Change path/image to images in your local site folder.</p>
    </body>
    </html>
    Good luck with your project,
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb
    http://alt-web-design.blogspot.com/

  • Random Image not displaying in Live View.

    My page is at:
    www.andrewjamesartist.co.uk
    There's a random image script on the front page.
    <img src="randomimages/rotate.php" alt="A Sample Image from the work of Andrew James" />
    That's how it is placed in the page.
    It shows in preview in browser and it's OK live but it doesn't show in LiveView.
    I use a testing server set up with virtual hosts.
    Martin

    My page is at:
    www.andrewjamesartist.co.uk
    There's a random image script on the front page.
    <img src="randomimages/rotate.php" alt="A Sample Image from the work of Andrew James" />
    That's how it is placed in the page.
    It shows in preview in browser and it's OK live but it doesn't show in LiveView.
    I use a testing server set up with virtual hosts.
    Martin

  • Pull random images from iPhoto library folders

    I'm trying to come up with a script to pull random images from my iPhoto library and copy them to another folder that I can then use with another program (GeekTool) to display them on my desktop.
    What I'd like to be able to do is pull 30-50 of these images at a time. I can use GeekTool to call the script at a given interval (eg. every half hour) and have a completely different set of images everytime the script is run.
    I'm a complete obliviot when it comes to applescripting, so I'm at the mercy of the experts. I've managed to find a couple of scripts that can do something similar with the screensaver, but I'm unable to figure out the script enough to make it do what I need.
    Any help would be much appreciated. Thanks.
    brad

    You should post your question on the iPhoto forum.
    http://discussions.apple.com/category.jspa?categoryID=143
    Make sure you post your question in the appropriate iPhoto forum based on which version of iPhoto you have (4, 5 or 6).

  • Can't import an Image into flash

    When I tyr to import an Image onto Adobe Flash CS5, the image is balnk with grey outlines.
    Same thing happens when I try and copy and paste a image onto flash.

    I have created a dad on 9.0.3, and the import works. The dad in both are identical to what I can see. The 10gAS Apache logs has a preceding error message, here is the complete error messesages generated by the 10gAS Apache server when I try to import an application :
    [Mon Jun 13 08:58:13 2005] [warn] [client 172.22.101.206] [ecid: 1118671093:172.23.5.52:11116:0:1608,0] mod_plsql: DMS Logging: Unable to open/create /modplsql.lck
    [Mon Jun 13 08:58:13 2005] [error] [client 172.22.101.206] [ecid: 1118671093:172.23.5.52:11116:0:1608,0] mod_plsql: /astech/wwv_flow.accept
    HTTP-404 ORA-00904: "CONTENT": invalid identifier
    I have searched metalink for anyting on the "modplsql.lck" error and have not found anything.

Maybe you are looking for

  • Discount in invoice

    Dear all, my customer makes usage decision (acceptance with a specific discount) and wants that discount affects the invoice automatically, i suggested to create different U.D codes with all expected discounts (ex. : accepted with 10% disc.), but how

  • Images and graphics are not showing in certain emails when using Firefox. They show in Google Chrome.

    Certain emails from f.chtah.com(image info) are not showing graphic or image content. This happens in both gmail and hotmail. If opened in Google Chrome, they show up. I had my computer wiped clean last week and everything was showing up ok again unt

  • Has anyone solved the fan problem for the U350 64-bit machines?

    I would have returned it, but it's too late to do so. I've seen a lot of posts on this (the fan running all the time), but the fixes seem to concern the 32-bit  machines.  Any help would be appreciated. I wish I had gotten the HP dm3 intead _david

  • Adjust PDF view settings in Safari

    I use the default PDF viewer in Safari to save scientific articles. When I open a PDF document, the view setting is always too small. The view setting (seen when control-clicking) is "Actual size/single page/continuous." I would like to change the de

  • Variable based on

    Hello everyone! I'm just learning JSP right now so I hope I can explain my problem correctly. If i'm not making sense please let me know. I have a table (FormFields) in my database that stores which fields should be displayed on my web form. The tabl