Random Questions Malfunction

I have added 10 random questions to captivate 7 and I want to ask three to show for student. I have this set-up for text to speech. When I complete the module the questions appears fine, but I have experienced it reading a questions that it not on the slide. Any suggestions???

OK, I think I entered everything correctly on GoDaddy, but it's still not quite working. The only thing that's really changed is there's now a GoDaddy logo and message saying the site does not exist. I have a feeling the problem's on MobileMe's end, as I'm pretty sure I followed all the instructions for GoDaddy correctly. Although I skipped over the "Configure MobileMe" step since I'm pretty sure I've already done that correctly before (in MobileMe under Personal Domain my domain is there, saying everything is fine). Just in case I tried to reconfigure MobileMe by going into iWeb, then File>>Set Up Personal Domain on MobileMe, but whenever I click it it says the page does not exist. I'm afraid to remove the domain entirely from MobileMe and start from scratch because the "Set Up Personal Domain on MobileMe" option isn't currently working, at least not for me...

Similar Messages

When I attempt to sign up for the Samsung website using Firefox on my macbook, it returns an error that the random question answer is wrong

I was attempting to create a user at this site:
http://www.samsunggalaxys3forum.com/forum/register.php?do=addmember
It asks a "random" questions "Floors are horizontal, walls are ___?" When I hit submit, it returns an error that the answer was wrong. I tried several times using my macbook running firefox.
I get to work, where I am using an intel based machine running Windows 7, IE 9 and am able to register on the site and answer the question with no problem.
I have had the same problem on sites that use captcha - I cannot get past inputting the captcha phrase, as it returns an error every time, while using IE9 is problem free.
Is there something wrong with my setup of Firefox?

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Two random questions

hey guys.. i have two random questions..
1) when you recalibrate your battery... after you drain the computer and leave it for 5 hours.. when you RECHARGE IT (before its fully recharged) are you allowed to use it? or are you only allowed to use the macbook AFTER it's recharged... (because in the instructions it only talks about using it for the 2 hours AFTEr it's rechaarged)
2) also... i always wondered if there was a better alternative between amc the ripper and handbrake (since mac the ripper apparently can rip different region coded dvds)... but ir ealised mac the ripper does FULL dvd rips whilst handbrake converts it into like mp4 and stuff... is that true? (as in.. u cant do vice versa on each?)
thanks a buncho everybody! go the mac..

2) I use handbrake if I am planning on watching the
DVD on my ipod etc and Mac the Ripper to copy
(Backup) full DVDs. Obviously I do this in America as
it's illegal for some reason in the UK.
It is illegal in the US too. Seems "fair use" does not apply to DVDs and disabling the copy protection (which you do when you rip your DVD via mac the ripper or handbrake) is against the law.

Some random questions about integration features

Greetings,
after working for a few weeks with Autovue's ISDK (web server) and having some sucess with its integration with our custom CMS, I have a few random questions about what can be done and what can't be done. So, instead of opening many new threads, I'll post them here together.
1) Translation. We are localised in Russia, and its translation is incomplete. I have found a tra_en.properties file in AutoVue/bin, and a description about how to create a properties file for custom actions. But no information about how to translate to other languages - and russian translation appears to be packed within the jar of the applet. Is there a clean way to translate, or refine the current translation, so we don't get a mix of russian and english commands in the applet? Because my tries using EXTRABUNDLES have failed, as I don't want to add a bundle for extra actions, but to replace it for existing ones.
2) Attachments in markups. Markups allow to attach other files, but since our CMS is custom, we only get the option to attach files from our local drives. We did no browse integration with the CMS, as people with different levels of permission will have different access to files there, and we considered unnecessary to provide that level of integration. We are considering to remove this action from the GUI, but before that I'd like to evaluate how hard would it be to generate an upload file action, so the attached file would be stored in the custom CMS and linked to it so the whole thing worked. My guess is "it will be hard and time consuming", so for now, we are considering to delete this feature in our integration.
3) Is there a way to resize the Open markup dialog? We have several properties displayed, and fit well within a standard screen, but the dialog is small and you have to scroll the table to see all properties.
Thanks for any assistance with these issues

As always, thanks for the fast answer, Artash.
Yes, now I see attachments are stored inside the markup file. The problem is, when I open markup mode for the attachment, since the attachment uses some kind of default access method, my url's from the integration with the background CMS are broken completely. I believe the ideal state here would be to make some kind of inner markup for the attachment, maybe stored within the original markup file along the attached file. Or maybe it works that way, and I need to access it with the default gui action instead of my custom one. If that is the case, is there any way to tell the gui file how to differentiate a standard opened file from an attached one? If so, the issue has solution. If not... Well, then maybe something escapes me.
Edited by: Jordi Bosch on Apr 6, 2012 12:27 AM

Publishing w/ Random Questions

Hi,
I am using random questions in one of my programs and about
to send it off to the client. This client has Captivate and would
like for me to send the CP files. My question is, if I send the CP
file for the program, will the random questions in the pool go with
it? If not, how do I get them there?
Many thanks for your help!

Hi gbcvette
Yes, your random questions would be contained inside the .CP
file.
Cheers... Rick

HTML random question score incorrect. SWF works fine

Version 8.0.1.242
Question pool 25 questions. Random Question slides inserted. All questions set to score 1. 24 are multichoice, all standard.
Published as HTML
Score reported is 1 out of x.
I have tested with 3, 5 and 25 random questions from the pool. But the score is always 1 out of x
Published as SWF
Works correctly
I really need the HTML version.
Closed, reloaded. Saved as - retested. Turned it off and turned it back on. Sacrificed a mouse...
Andy

Correct questions
....Should be same as total points scored anyway as there is 1 point for
each question.

Random question slide not shown when FP 8 or FP 9 output

Hi everyone
I've just begun to use Captivate a month ago, so it is not
that much experience I can contribute with by now.
One thing I have recognized is that I get some problems with
random questions slides made from different question pools when
using Flash Player 8 or 9 in the output otions.
When using Flash Player 7 everything works as supposed: one
random question is shown for every random question slide using one
distinct question pool for each random question slide.
When using one of the two others some of my random question
slides are not shown. There are slides that are played - meaning
that the player shows an empty slide for the time of 3 seconds -
but the content is not shown. This happens only for some of the
random question slides, and those are the same question slides each
time, I publish - but when working or dragging around with the
random question slides and publish again, the problem would come
with some other random question slides, not positioned the same
place as before, but showing the same problem in each published
version.
As written before each question pool is only used once. The
different question slides used in the question pools are all
duplicates, naturally with adjusted content.
Does anyone has experienced something like that before? Could
there be any other trouble with the content when using Flash Player
7 in the output options, like quiz not playing in newly updated
Flash Players ore something like that? Anything?
I appreciate your suggestions or comments! Thanks in advance
and kind regards,
Lars

Some more info - and a working solution...
I have worked on this topic a bit more - and found out, that
I have a problem with output option set to Flash Player 7, too.
When I delete every other navigation option than the "next
question" (what is it called in english?) button, I get this
problem:
The quiz now "freezes" randomly, not every time, but again
and again. The quiz has both random slides from question pools and
simple question slides.
I have found out, that putting the simple question slides
into question pools and then showing a random slide from those
question pools fixes the problem.
Has anyone experienced problems like that? Other solutions?
Kind regards
Lars
Maybe someone has a similar problem.

Convert to Question Pool random questions?

We are updating a course we developed last year (prior to
Captivate 3). This year we want to apply Captivate 3's "Question
Pool random questions" to this course. Is there a way to create the
question pool(s) in this existing quiz, and then add last year's
questions to them without having to re-enter each question into the
Question Pool Manager?
Thank you for any tips!

Hi Jan
Sure thing. Just convert the version 1 or 2 project to a
version 3 project. Then define a Question Pool. Once you have done
that, switch to Storyboard view. Select the question slides you
wish to add to the pool and right-click. You should be presented
with an option to add the selected slides to the pool.
Once you have moved the question slides to a pool, you would
then insert Random slides that point to the pool.
Cheers... Rick

How to make Random questions work without closing and restarting?

I have a quiz using random question slides and random pools.
The random slides display random questions when I run the CP4 file, let it close then relaunch it. I'm using an LMS.
I would like to be able to repeat the quiz again without closing and relaunching, but my method does not work.
I tried using a button (retake) on the last slide to 'jump to' slide 1 when clicked. The quiz does repeat, but show the exact same questions.
I thought there might be a variable that would reset the quiz, but could not find one.
Does anyone have method to do this?
Thanks,
Dave

I don't know of a way. My experience is the same as yours. The quiz questions are selected and shuffled when the lesson is launched. When 'retake' is clicked, the quiz repearts the same questions. The only way to get a new set of questions is to close and relaunch it.
I suppose there's be some function to invoke or array to manipulate via AS, but I've no idea what that may be...
So no help here, just backing what you're seeing.
Erik

Random Questions are Not Random

The Question Pool has twenty-five (25) questions, and ten (10) Random Question slides in the project. The frist time a learner takes the course the questions are randomly chosen, as they should be. Assuming the learner fails and retakes the quiz, the learner is seeing the same set of questions; not a new 'random set. Is there some setting that I am missing to give them a new random set of questions? Thanks for any help!

Sorry, but that is the way random question slides are designed. The only way to have another set of random slides is to restart the module.
Lilybiri

Random questions on a DVD quiz?

Hi,
For one of my college projects I have to produce an interactive DVD quiz. The main issue though is, can I make a DVD quiz that will have random questions (video / screenshot) everytime?
Is this possible with DVD Studio Pro?
If so, how? Is it a simple thing, or will I need a long tutorial?
Thanks for any help guys

LOL - I did think of doing so, but saw that Drew had linked to a plethora of similar threads... some quite recent.
I am wondering how much of this needs to be your own work for assessment and how much you can just crib from others? Not that I have any particular moral standpoint, it's just I used to be a teacher!
So, to undermine the entire system, just head to that link Drew gave, scroll down and look for the one near the bottom dealing with 'non-repeat quiz'. There is a link to a download there which has all you need in it, I think. It certainly has the basic scripting and structures you'll need to use - whether you want to extend this or not will depend on what you need to achieve, but do look at it, see what it is doing and then adapt it for your use. I provide it with no limitations to its use, but can't guarantee an 'A' from it!

Random Questions not selecting Pool

Intermittently, a pool question is bypassed in Cap6.
I have 3 random questions slides, each linked to one of three pools. I named each question Q1P1, Q2P1, etc. for tracking purposes. Not all pools are having questions used.
Has anyone else been able to ensure that each pool has a question used (which is what the random question slide linked to a pool did)?
Thanks in advance for any help you can give on this issue.
Lew.

Thanks Rod. I tried both of your recommendations, and it seemed to work on my system. But, on another system, it was specifically NOT random for the pools. It seemed to randomize the questions, just not the pools.
Here are the test results from the other system:
Try 1
Q1 Pool 1
Q2 Pool 2
Q3 Pool 1
Try 2
Q1 Pool 2
Q2 Pool 1
Q3 Pool 1
Try 3
Q1 Pool 3
Q2 Pool 3
Q3 Pool 2
Try 4
Q1 Pool 1
Q2 Pool 2
Q3 Pool 2
Any ideas?
Lew

Random Questions crash

Hi
I'm trying to use the Random Questions in Captivate3 using
built up pools of questions, every time I try to preview the
project it loads 25% and stays there for ever (hold the project).
Has any one come across a solution to this problem?
Thanks
Anahad

Hi,
How big is the question-pool that you are trying to publish ?
Ideally a pool in CP3 should not have more that 15-20 questions, Also the project itself should not have more that 40-50 slides.
To check if this is a bug or not try out the following steps :-
1) copy 2 questions from your pool.
2) close the project.
3) create a new project.
4) open quiz pool manager.
5) paste the questions to the default pool.
6) add couple of random questions in the project.
7) preview and check
Manoj

Add random questions automatically

Hi is there a way where the user can set the number of questions they would like to answer?
thanks in advance

Hi Michael
Hmmm, I'm not so convinced this isn't possible. Why couldn't a Text Entry Box be used to gather the desired number of questions? For example, provide a range of say one to 20. Then store this in a variable. Then you could program a series of 20 random questions. But as each question is encountered, you could check and set variables. Then once the magickal desired number was met, finish the project.
While it would be a bit of an effort, I could see that working.
Just thinking out loud a bit... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Grabbing Random Questions for the Question Pool

Hi Everyone,
I am interested in exactly how the Random Question Pool
works. Let's say there are 50 questions in the question pool and
you want 10 questions from that question pool of 50. When you
publish I understand you will get 10 random questions from the 50
questions. Then when you run your published project are you always
going to get the same 10 questions or another 10 of the 50 pooled
questions everytime your run that same published project? Or do you
have to publish again, calling the quiz another name to get another
10 of 50 questions from the question pool? I appreciate the help on
this.

Hi slewis6337
It is my understanding that each time you
display the Captivate output, you see a totally random
question. So if your question pool contains 50 questions, each time
your Captivate output presents the random question and draws from
the pool, it is truly drawing a totally random question.
I do believe that Captivate does keep track of which
questions have been used in the pool. To test this, try creating a
pool containing three questions. Then create four random question
slides that point at the pool. Then try running the Captivate. You
should see that as random question number four is encountered, the
screen goes totally gray. This is happening because you have
exhausted the question pool.
Sincerely... Rick

Random Questions Malfunction

Similar Messages

Maybe you are looking for