Raw image frames to x264?

Does anyone know if it's possible to encode raw image frames, like a directory of PNG files, directly into x264? I know how to use FFMPEG and Mencoder to do it, but I would like to be able to go straight in.

I'm not sure what you mean by being "able to go straight in". But since mencoder can encode to H.264 using x264 and you already know how to convert a bunch if image files to a video stream using mencoder you're basically set. Something along the lines of
mencoder "mf://*.png" -mf fps=25 -nosound -of rawvideo -o output.264 -ovc x264 -x264opts bitrate=800:bframes=2:b_pyramid:deblockalpha=2:deblockbeta=2:subq=3:4x4mv
should work (with all the options being just examples and not required).
Note: You may have to recompile mplayer to make it actually support x264. But it works and I've already done it

Similar Messages

E-M5 Mark II: Why does LR6 not support working with the full 4:3 raw image for pictures taken using a different aspect ratio?

When importing Olympus E-M1 or E-M10 raw images which are taken in aspect ratio different to native the 4:3 MFT sensor format, LR will display the frame as crop overlay to the full image as captured by the sensor. This is very useful because at time of postprocessing one can still control the position of the frame, and modify if required.
I was very suprised to see that for E-M5 Mark 2 this is not supported in LR6. The raw file in LR6 corresponds exactly to the frame which was chosen while shooting. Full 4:3 image information is present in the ORF raw file though, which can be easily seen eg using Olympus Viewer.
Is there any specific reason why this useful feature has been neglected for E-M5 Mark II?
Thanks
Karsten

Try asking in the Lightroom forum.
Photoshop Lightroom

How do I Export Raw images from Iphoto to Adobe Photo Elements 4

I recently purchased Photo elements 4 because I could import images from Iphoto in Raw format and work with them. Everything I have read and the instructional video sent to me by Adobe make it look and sound very easy but so far I have had no success.
I have been able to open Bridge and view photos from Iphoto so it seems to me that everything that I have in Iphoto is automatically transfered to Elements 4. However I can not find my Raw images. What am I doing wrong or failing to do and is there some logical sequence that I have to follow to import Raw images.
I am using a Nikon D200 and just to be safe I have been shooting so the images are saved both in JPEG and RAW.
Thanks for any help you can provide

dakota8,
iPhoto and Adobe Bridge are incompatible, so you need to decide which one you want to use (for which photos). iPhoto is a database, with many flexible features for organizing your library and finding your photos. Bridge is a file browser with some organizing capabilities. You absolutely should not use Bridge or any other application (Finder included) to browse the files inside your iPhoto Library folder, as it will damage the iPhoto database. To verify, click on iPhoto's Help and read the section "About using the iPhoto Library."
If you want to keep your RAW files in iPhoto, then you'll need to open them from iPhoto. As Dave E said, this can be done by setting the iPhoto pref to export RAW files. You also need to set PE 4 as the external editor in iPhoto's preferences. With this setup, you can select photos using iPhoto, open the RAW files into PE 4, then edit. Now comes the wrinkle in the workflow. Normally, you would do a Save to cause your edited file to be saved back into the iPhoto library. This Save, not Save As, requires that the filename and extension stay the same. Works great with jpeg files. However, once you edit the RAW, the extension (and file format) must change. Save will not work, because any save at this point is treated like a Save As. So you have to Save As to a folder OUTside of your iPhoto Library, and then import it in as a new file. There will be no link between the edited version and its unedited RAW file. You could organize inside iPhoto to display the edited file beside its original RAW, or keep separate rolls for the originals and edits.
With that in mind, you might not want to save the RAW files in iPhoto at all. You could create your own filing system for them, which you would browse using Bridge. Upload using Image Capture to save your files to a folder of your choice. Once you edit the RAW files and save as another format, you could them import into iPhoto for cataloging or further editing. You'll just have to find the system that works best for you.
BTW, don't save your edited RAW files as Adobe RAW. I tried and discovered that iPhoto refuses to import them at all.
I have been able to open Bridge and view photos from Iphoto so it seems to me that everything that I have in Iphoto is automatically transfered to Elements 4.
There's no transferring involved at all. Bridge is rooting directly inside the iPhoto Library folder. Did I mention that it's best to avoid this?
However I can not find my Raw images.
When you import a file it is saved into the Originals folder. Your RAW files are there, along with any video clips you may have imported.
iPhoto automatically creates a jpeg version of your RAW files and stores it in the Modified folder. It has to do this in order to display the picture on your screen. With video clips, a jpeg of the first frame is created for display purposes.
I am using a Nikon D200 and just to be safe I have been shooting so the images are saved both in JPEG and RAW.
If you import both versions into iPhoto, then you have
Originals - RAW
Modified - jpeg
Originals - jpeg
(Modified - jpeg - if you edit the jpeg version or if they are auto-rotated to portrait orientation)
I don't shoot in RAW, so I can't really comment about which workflow would be the most efficient. I just played with it long enough to realize that there is no easy way to do it.
Regards.

Need help with EXIF date on raw images

I have just over 100 images (taken by 2nd shooter) that have the wrong EXIF date (JPEG and raw). They were taken with a 2nd camera that was off by +15hrs 57min.
There are many programs that will easily edit the EXIF date/time on the JPEGs, but they don't work with the raw images.
I've read that Lightroom can compensate for incorrect dates upon import, but after searching, I can't find any information on how to do it. Can someone please help?

I got EXIFTool working and solved my problem down to the exact second.
I was able to sync the times to within one second, based on one one particular event. One shot, taken with camera 1 was right before a handshake, while both people were extending hands, the other shot, with camera 2 (wrong EXIF date) was the actual handshake. I used this information to determine that camera 2 was 15hours 57minutes 18seconds fast.
Using EXIFTool GUI, I modified the date/time shift to decrement 15hours 57minutes 18seconds for all images from the second camera (both raw and JPEG). After this was complete, I checked the times, and the two frames (before and during the handshake) were only one second apart, and in correct sequence.
I imported the images from both cameras into Lightroom and had it rename the images based on time down to the second (YYYYMMDDHHMMSS-filename).
Now everything is great!

RAW image recording / lens abberation correction

My question involves which image-recording quality matters when one is planning to use lens correction data. Although one of EOS Utility manuals mentions how Digital Photo Professional can resolve peripheral aberrations, it only mentions chromatic corrections only for images such as those recorded RAW. What precisely are right and wrong recording quality choices, in regard to their correlation to the correction data that software uses to fix aberrations?

Peripheral illumination correction merely corrects optical vignetting that's inherent to many lenses. In other words, it corrects the eveness of illumination across the entire image frame, where without it the corners and edges of the image might be a little darker than the center of the image. It's most common in wide angle lenses. Distortion and chromatic aberration corrections are only applied in-camera when you process RAW files into JPEGs. So, in other words, if you want them done in-camera you must have the camera set to produce JPEG or to RAW+JPEG for these corrections to be applied. The same corrections can be applied during post-processing by Canon Digital Photo Pro RAW conversion software. If you had the corrections enabled in-camera, then allow DPP software to process "as shot", it will apply them the same way as if it were in-camera. Alternatively, you can manually override the corrections in post-processing.
Many other post-processing RAW conversion softwares can do similar. For example, Adobe Lightroom (Adobe Camera Raw) has a lot of lens correction profiles built in that can be applied automatically, as well as manual controls for all three types of correction. DXO software appears to be an even more advanced lens correction software. If done in post-processing, the end result from the RAW conversion can be a file type other than 8 bit JPEG, such as 16 bit TIF or PSD, etc. If the processing is done in-camera, you can only get JPEG files. I hope this makes sense. ***********
Alan Myers
San Jose, Calif., USA
"Walk softly and carry a big lens."
GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & EXPOSUREMANAGER

How can I edit a RAW image in Adobe Bridge and/or Photoshop?

Whenever I drag and drop a photo or group of images from iPhoto. it automatically converts them to jpegs. Even when taken as RAW images. With iPhoto 09, you could do a search of the IMG_#### listed in iPhoto, and a normally-hidden folder full of the original downloaded RAW images turned up in the search. Now, in iPhoto 11, the RAW images newly downloaded DO NOT show up in any system searches (using 10.8.4. It was bad enough when they were hidden... now they are virtually gone.
I want to use iPhoto for organization and some editing, but some photos I want to work with in the RAW format and save as TIFFs. How do I do that?

Whenever I drag and drop a photo or group of images from iPhoto. it automatically converts them to jpegs.
Drag and Drop and Media Browsers access the iPhoto Previews only. No conversion, just the previews.
With 10.8 Spotlight no longer searches within packages, that's to protect the inexperienced user from trashing his or her library inadvertently - as directly accessing the file can do.
To use Raws with an external editor:
First off set your preferred app as an external editor in iPhoto:
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Next: In the iPhoto Preferences -> Advanced, elect to use Raw with your External editor:
Now when you go to edit the Raw it will be sent to your external editor.
But there's a kludge here.
iPhoto sends a copy of the file to Photoshop. In the case of a Jpeg you simply save and it all comes back to iPhoto seamlessly. However, if you use a Save As then Photoshop is creating a new file and iPhoto knows nothing about this.
Now here's the catch with Raws. You cannot save a Raw. The work you do must be output to a new file, in a new format (jepg, tiff, whatever). However, as the External Editor is making this new file iPhoto has no knowledge of its existence. Therefore you must save it to the desktop and then import it back to iPhoto as a new file.
This means that you will have your Original Raw and the processed version in iPhoto but they will not be recognised as version and original. iPhoto will see them as two separate shots.

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please help

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

Can't open raw images in Photoshop Elements 9

I've just finished doing a fresh install of Windows 7 x64 SP1 onto my desktop PC. I installed Photoshop Elements 9 but it can't open any raw images (specifically Canon .CR2). When I open one of the same images with Photoshop CS5.1, it properly opens up the image in Camera Raw (6.6), allows me to pre-process the image, then edits it in Photoshop (as you would expect).
Before installing Photoshop, I did manually install Adobe Camera Raw 6.2, then upgrade it (multiple steps) up to the current v6.6.
I also copied the Camera Raw.8bi into the Plug-Ins\File Formats sub-directory of both C:\Program Files (x86)\Adobe\Elements 9 Organizer and C:\Program Files (x86)\Adobe\Photoshop Elements 9 but there was no change of behavior with Photoshop Elements 9.
This was working prior to the re-install of Windows 7.
Any suggestions on how to get this working? Thank you, in advance.

When I to to Help>Update, it offers to update Photoshop Elements to v9.0.3 but no mention is made of Camera Raw (any version). I'm not even sure how to determine what version it thinks is installed since there's no reference to Adobe Camera Raw in the Windows 7 Programs and Feature Control Panel applet.
Suggestions?

Can't open RAW images in Photoshop

I purchased a new computer. It runs 64 bits. I have CS4. Since uploading it to my computer, I can not open RAW images. I have downloaded the most recent updates.
I have been using the 32 bit photoshop because I could not get my NIK filters to work in 64 bit. But I can't open any of my RAW images. I can't open them in either 32 or 64 bit.
I have version 5.0.0.178 of Camera Raw. I only know this because I can see it under "About filer.... Camera Raw". I cant find any camera raw filters in adobe/plug-ins in either version of photoshop. I have a huge photoshoot tomorrow. I NEED to open RAW images. HELP!! Regular Support is down for the next few days.

If you look at this list: http://kb2.adobe.com/cps/407/kb407111.html
You will see you need Adobe Camera Raw 4.6 or later.
As Chris says, update either maually from here: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4681
Or use the Updater from PS help.

Opening raw images in Photoshop Elements 9

When opening raw images in Photoshop Elements 9 (File -> Open or File -> Open As), the Adobe Camera Raw dialog do not open.
Instead I get a window with a progress bar and the text "Reading Camera Raw Format".
The image then opens in the Photoshop Elements editor.
I have tested this with raw images both from Canon EOS 1000D and Samsung WB2000 cameras.
I would appreciate any suggestions on how to solve this issue.
I run Photoshop Elements on a HP netbook running Widows XP and with an Intel Atom N450 / 1.66 GHz processor, 2 GB ram and a screen resolution of 1024 x 600 pixels.

Unfortunately you can't see the raw converter in PSE 9 on screens less than 800 px tall, which means not on netbooks. PSE will automatically convert it for you, but that dialog box and a few others, like the Advanced Downloader window, will not appear.

When opening an image Photoshop Elements 12 is opening it in Camera Raw, it is not a RAW image and it is cropped How do I uncrop the opened image?

When I am opening a .jpg image not an actual raw camera image from Elements 12 it is being opened as a camera Raw image and the image is cropped, I can't find anyway to get the image to uncrop or zoom out so that the entire image is visible so that I can actually edit it to something that is useable. The images were taken with an iPad and copied I suspect using the organizer from Elements 11 but I can't be sure. If I could just uncrop the opened image so that the entire image is visible this would not be a big deal.
Is there a way to uncrop the image that is being opened by Camera Raw? Am I going to have to get my hands on the source of the images (the iPad) and copy the images again using explorer and not let them be copied with the organizer?

Uncheck the boxes at the bottom of the dialog Scale styles and resample Image so that only constrain proportions is checked. If you the change the resolution box from 240 to 300 you will get back to your original dimensions.
This is a meaningless thing to do, you still have the exact same number of pixels, you have only changed the metadata number in the file for ppi, and your prints are not affected by this number.
You could also use the same method to change the dimensions to 6 x 4 or 9 x 6 etc.
There are some cases (actually most cases) where you need to CROP the photo to change the dimensions, when the aspect ratio of the original photos is different than the aspect ratio of the final photo; the specific case in 99jon's example is the only case you ever want to change dimensions using Image->Resize->Image Size, where the aspect ratio doesn't change from 6x4 to 9x6 (or 12x8 or 18x12 or ...), and even then, you could do the same thing simply by telling the printer the size you want, you don't really need to do anything in PSE.

In Photoshop CS5 why does Camera Raw 6.7 not open a Crw Raw Image?

I am running Windows XP Pro 32 bit system,with AMD ALthon 2600 processor.When I first installed Photoshop CS5 it would not open at all.After hours on the internet searching for online help from Adobe,L came across a on line chat.They said I needed a update for CS5.I downloaded the update and installed it and Photoshop opened up.Ithought this had solved my problem.Days Later I tried opening some Crw Raw Negatives.They would not open in Bridge or Mini Bridge.So I tried opening the raw image in Photoshop,a box pops up and says photoshop could not complete the task because it was the wrong image type.I have tried to get help in the General discussion forum,so far noyhing has worked.Also I forgot How to get to the online chat site,if anyonehas any ideas or where this site is It would help a lot......Thanks.

breasons wrote:
…I have tried to get help in the General discussion forum…
There is no such forum. The Forum Lounge is for social interaction or for meaningless chatter. The Forum Comments forum is to make comments on how the forums operate or ask questions about that. Perhaps you mean the Photoshop General Discussion forum or the Photoshop Beginners forum?
In any event, unless you provide full details no one is likely to be able to reply to your questions.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Loading a raw image in BufferedImage

Hi guys,
I'm very new to java .I have a raw image which has 32 bit pixels which has ABGR...with alpha as the most signficant byte and the red as the least significant byte. I have an array of ints and I want to load this to a BufferedImage object. I then use a JPanel and render the BufferedImage on to it. I tried doing with other file formats like jpg , gifs and so the rendering to the JPanel works fine. But I'm not able to get the array of ints to be stored in BufferedImage correctly. Could you please let me know what I did was wrong or any suggestions?
Currently I have a class called RGBAImage that reads the raw image and stores it as an array of ints.
So in order to create a BufferedImage I do this roughly,
DataBufferInt buffer = new DataBufferInt(img.getPixels() , img.getPixels().length) ;
// bits red green blue alpha
ColorModel cm = new DirectColorModel(32, (int)0x000000ff , (int)0x0000ff00 , (int)0x00ff0000 , (int)0xff000000) ;
SampleModel sm = cm.createCompatibleSampleModel(img.getWidth , img.getHeight) ;
WriteableRaster raster = Raster.createWritableRaster(sm , buffer , null) ;
BufferedImage bimg = new BufferedImage(cm , raster , false , null) ;Is this how its to be done? I am not getting the image drawn on the panel. Any suggestions or links?
Thank you
Siddharth

I have an array of ints and I want to load this to a BufferedImage object.In your sample code I cannot see how the int array you are talking about becomes the image data. Also, what is the img variable? Please provide a more complete code sample.

How to get Aperture and iPhoto to use Pentax *ist DL RAW images natively

Using some techniques that I found in various places in these forums, I am going to give step-by-step instructions to get Aperture and iPhoto to recognize Pentax *ist DL RAW images natively.
Note: This worked for me using 10.4.6 with the latest iPhoto 06 and Aperture updates. I do NOT know if this will work on older versions of OS X, iPhoto, or Aperture.
Note: If you also use a Pentax *ist DS camera, these instructions will probably disable support for that particular device due to the modifications made to a system file. Only complete these instructions if you want to use a *ist DL camera.
** These instructions involve modifying system level files using a HEX editor. If you are not comfortable with this, do NOT attempt to do this or you could kill your system. Remember, BACKUP BACKUP BACKUP. These steps worked great for me but follow at your own risk!! **
Ok, lets begin...
1) Download this great patch by macintosh_tech
http://idisk.mac.com/macintosh_tech-Public
This patch contains an updated raw.plist file which includes the RAW information for the *ist DL. This patch also contains an updated libRaw.dylib file and an updated Raw Presets file for Aperture.
** Do NOT copy the libRaw.dylib file from this patch to the folder listed in the patch Read_Me. This file did not work on my Intel-based Mac and crashed my system!!
I was able to modify my original libRaw.dylib file using a HEX editor to get it to work on my system. Instructions for this modification will follow.
2) Open the .dmg of the patch in a Finder window
3) Open a new finder window and browse to /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ImageIO.fra mework/Resources
*4) Backup the libRaw.dylib and Raw.plist files. Copy them to a safe location. For extra safety, you can just copy the whole Resources folder to a safe location (Make sure that you COPY it and dont MOVE it)*
5) Right-click the libRaw.dylib file and select "Get Info". Look at the bottom of the info window and expand the "Ownership & Permissions" tab. In this section, expand the "Details" tab. If the lock icon is in the locked position, click it to unlock it. Change "Owner" to your user name. If requested, enter your system password at this point. Close the info window. This step lets you modify the libRaw.dylib file.
6) Complete step 5 for the Raw.plist file.
7) Copy the Raw.plist file from the "Place In System Folder" folder from the patch to the Resources folder. It will ask you if you wnt to overwrite the existing file. Click "Replace".
8) Open a new finder window and browse to the /Users/YOURUSERNAME/Library/Application Support/Aperture/ folder.
* 9) Backup the "Raw Decode Presets.plist" file *
10) Copy the "Raw Decode Presets.plist" file from the "Place In Home Directory" folder from the patch to the /Users/YOURUSERNAME/Library/Application Support/Aperture/ folder. Click "replace" if it asks you.
11) Here's the tricky part. Download a HEX editor if you don't have one. I used 0xED. It is free and can be downloaded from
http://www.versiontracker.com/dyn/moreinfo/macosx/29521
12) Open the libRaw.dylib file from the Resources folder in your HEX editor.
Note: This is your original libRaw.dylib file from your /System/Library/...../Resources/ folder, NOT the file from the patch.
Use the Find function and search for the string "Pentax *ist DS". Make sure you are using "Search Type: Text" (or equivilent in your editor) and that you use proper case. When you find this string, change the "S" in the "DS" to an "L". The string should now look like "Pentax *ist DL". Use the "Find Next" function to find the next instance of "Pentax *ist DS". Again, change the "S" to an "L". There should be two total instances that you need to change. Save the file and exit the editor.
13) Open Disk Utility and repair permissions. This will set the raw.plist and libRaw.dylib files back to their original permissions.
14) Reboot the system.
15) You should now be able to view .PEF files natively in Aperture and iPhoto. I appologize in advance for any typos. Let me know how this works, as this is my first tutorial of this nature.
Macbook 2.0 Mac OS X (10.4.6)

It would appear that my last post was a moot point as the 10.4.7 update adds support for the *ist DL. It's nice to have it biult into the operating system now.

Automatically export to JPEG from RAW images

RAW images are preferred form of shooting for many photographers. And, Lightroom is great at managing and developing these images. However, we increasingly use/view these images outside Lightroom and away from the PC where we do most of the development. For example, I use a DLNA server which shows off my entire image collection to big screen television (which can act as a DLNA client). The same DLNA server is used to send images to our smartphones (my wife loves to show all kid pictures anywhere she - without having to carry the pictures on the phone).
Most other applications that use these images, do not work on RAW images and JPEG images must be exported manually from Lightroom. This becomes increasingly difficult to manage and keep track of while developing RAW images. How many RAW images need to be exported? How many images did I touch since the last time I exported them?
Currently, I am using the following process to manage this:
1. I created a smartlist which contains images that are edited after "a particular date".
2. I select all images in this smartlist, and use Lightroom3's export function to export them all as JPEG, to the same folder as original.
3. Once the export is completed, I modify the smartlist to change the "particular date" to today's date.
I plan to repeat this procedure every so often (once a week or so).
It would be great if Lightroom had a feature such that it always keeps "JPEGs exported" for all RAW images (with the latest development settings of course). This could be a process that could occur in the background or at a user-specified time/event (e.g. when one closes Lightroom). User should be able to specify where the exported JPEG images should be put to and with what name (I prefer in the same folder as RAW but other users may have other preferences). User should be able to select if this is only done for RAW images or also for JPEG and other formats (in which case, should the exported image override the original or not). The exported images should be (optionally) automatically included in the Lightroom catalogue and stacked with the original RAW image.
Mainly, the entire process should be completely transparent to the user. A collection of JPEG images - corresponding to the latest development settings for the RAW images - should be always available.
Osho

I've heard many others raising the issue of an auto-jpeg feature - kinda like auto-write xmp, except auto-write jpeg.
I agree this would be nice, obviously some sort of "stability" check would be needed so it isnt constantly writing jpegs as you edit. Lightroom employs a form of this already for the xmp - meaning it doesn't update xmp every brush stroke, but accumulates several strokes before updating, so its more efficient...
If you could define multiple jpegs to keep - with the raws, or a separate tree - even better. That would obsolete all the tree output plugins and publishers.
The publishing feature was intended to fill this need (albeit manual only), but it suffers from the inability to publish to original directory, and/or an external tree.
I'd like to see a manual mode too, that accompanies a new "Done for now" function - so when you say "Done for now", it saves xmp, jpeg(s), snapshot, and optionally locks the file so unapproved changes can no longer happen to it. Then if you could define multiple "done for now" presets that include initiating publish service and exports, then the work-flow becomes: 1.import, 2.edit, 3.done for now - and thats it (maybe repeat 2 + 3 in the future). i.e. no more manually initiating the exports, publish services, snapshots, saving of xmp, ..., and whatever else you do when you're done.
In the mean time, I may make some of this part of an up-n-coming "Sidekick" app + plugin combo when I get to it.
Presently, I dont use publishing services, and I have ExportManager to consolidate exports (which includes TreeSync), so my workflow is: 1.import, 2.edit, 3.done for now (save xmp+snapshot, and lock via ChangeManager), 4. initiate consolidated exports...
Rob

Raw image frames to x264?

Similar Messages

Maybe you are looking for