Rdp://full%20address=s: IP or DNS Name is not user friendly... Can rdp:// IP or DNS Name be assumed as the full address in Microsoft Remote Desktop?

We would like to request Microsoft Remote Desktop (MRD) to behave the same as the open source CoRD.app on OS X with respect URL resolution.
Example:MRD will resolve from Terminal rdp://full%20address=s:<IP or DNS Name>, but not rdp://<IP or DNS Name>
As the OS will respect any of the following protocols in Terminal or browser:
afp://<username>@<IP or DNS Name>
cifs://<username>@<IP or DNS Name>
ftp://<username>@<IP or DNS Name>
ftps://<username>@<IP or DNS Name>
http://<username>@<IP or DNS Name>
https://<username>@<IP or DNS Name>
smb://<username>@<IP or DNS Name>
ssh://<username>@<IP or DNS Name>
vnc://<username>@<IP or DNS Name>
(<username> can be omitted to force authentication at connection)  it seems slightly redundant to force "full%20address=s:" in the URL.
Can Version 8.0.1.6 be modified address this request?
What is the proper way to report an enhancement request or bug?
Thank you for your consideration.

Hi,
From your description it appears that you want to modify the pattern for assigning the rdp full address but this doesn’t support as per your requirement. That is the default string which we need to have for passing full address. 
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • Hi there , i use microsoft remote desktop to connect to my work pc - on my 21.5 mac the remote screen is half the size of my screen and i cant get it to be full screen - is this possible or am i just stupid ? many thanks

    Hi there , i use microsoft remote desktop to connect to my work pc - on my 21.5 mac the remote screen is half the size of my screen and i cant get it to be full screen - is this possible or am i just stupid ? many thanks

    What setting have you chosen in the view menu? Fit to Screen or Window.
    And, in Preferences what have you set for Display?

  • Why does my iPad recognise some contact names but not others I can send some messages but not others

    When I try to send messages some names are recognised and some are not

    If you are talking about iMessage... It will send messages to people that are using ios5, and have turned I message on on their device.   For your other contacts, you need to send a good old fashioned e mail.

  • I can't chose a group of contacts. Just the full "addressbook"

    So after many years of syncing the addressbook to my different SonyEricssons mobile phones I can't use it. Since I don't have a phone with space for around 2000 adresses I have used a certain group to synk the most importnat telephones.. Now this impossible. I can't chose any group. Traditional or smart group ...
    What to do? I have been trying to throw away preferences and similar. No change.
    Leif

    Same question

  • I want to make thumbnail pictures of logo to have the full effect on Facebook

    I have some logos on Facebook and want to have their full names and not half of it.  How to make a thumbnail to have the full effect.  Any ideas?

    How images are displayed on FaceBook is a matter for Facebook.
    You can chnage the size of an image using the export dialogue.
    File -> Export
    In the resulting dialogue note two options:
    Jpeg Quality is the amount of compression used on the file. Lower Quality means a smaller file.
    Size refers to the Dimensions (length by breadth) of the photo in Pixels. Smaller dimensions means smaller file size.

  • DNS cache " Name Does not Exist"

    Hey Guys,
    So we've been experiencing a really weird issue related to the DNS for past couple of months. Here are the details:
    1) Our domain machines are Windows 7 Enterprise and their DNS points to Windows DNS Servers
    2) For companyxyz.net internal sites, the Windows DNS resolves those from its
    companyxyz.net zone.
    3) For public *.companyxyz.com records, the Windows DNS has conditional forwarders to point these requests to our Linux Bind Servers. And than the authoritative name servers respond to these queries accordingly
    4) Our internal employees use the public records such as testing.companyxyz.com 
    Problems:
    1) Employees on the internal network would randomly experience page not found on their browsers while trying to hit
    testing.companyxyz.com. When we try to ping this URL, ping would fail too. However, NSLOOKUP would work perfectly fine and return the correct results. ipconfig /flushdns fixes the issue right away
    2) During the time when this problem is occurring, if I look into the local cache ( ipconfig /displaydns), I find an entry saying:
        testing.companyxyz.com
        Name does not exist. 
    ipconfig /flushdns obviously clears out this record along with the other local cached records and fixes the issue.
    3) Point the local computers directly to the Linux Bind servers as DNS never create this issue. It's only when they are pointing to the Windows DNS and going to this public record. The problem also seems to occur a lot more frequently if there are considerably
    high number of hits to this URL.
    Have you guys experienced this issue before? I am looking for a fix for this issue and not having the end-users to flush their dns constantly. Also note this problem occurs sometimes once a day, or 2 -3 times a week. It's very random.
    Thanks.
    Bilal
     

    Hi,
    It seems that the issue is related to your Windows 7 client. Considering whether there is DNS attack or virus on this computer.
    Please try to do the safety scan first.
    Please monitor the DNS server performance referring these article:
    Monitoring DNS server performance
    http://technet.microsoft.com/en-us/library/cc778608(WS.10).aspx
    Monitoring and Troubleshooting DNS
    http://www.tech-faq.com/monitoring-and-troubleshooting-dns.html
    For further step, we need to capture the traffic by using Network monitor when the issue happened and we continuously ping
    testing.companyxyz.com.
    Microsoft Network Monitor 3.4
    http://www.microsoft.com/en-us/download/details.aspx?id=4865
    Let’s see whether there is DNS request happened and the DNS request is handled.
    You can post back the save traffic log here for our further research.
    Kate Li
    TechNet Community Support

  • Connection Errors to Remote Desktop from OSX after Domain name change

    We have an issue using Microsoft Remote Desktop from Macs in our school. All was well until we changed the domain name of our RDS servers and installed a new wildcard certificate. Connections work perfectly in Windows 7/8 and also iOS on iPads, but we cannot
    get any Macs to connect having tried OSX 10.7 and 10.9. The error message says the connection failed to load but seems to add a spurious end to the connection string - TS/en-US/Default.aspx - but we cannot trace where this is being picked up.
    We can get to the site in a web browser and sign in to receive the "browser not supported" message in Safari so traffic is obviously getting to the severs.
    Has anyone else had a similar issue? We have spent days poking around with DNS etc but can't seem to make any progress here.

    Hi Jeremy,
    I have tried removing connections and also re-installing the App. We have been using this App since January with no real issues until we made our domain name change - I really don't understand why it works fine in Windows and iOS but not OSX. We are doing
    nothing different to what we have done from day 1.
    Log file from our old connection when it was working looked like this:
    [2014-Mar-24 10:41:43] RDP (0): Final rdp configuration used: redirectcomports=1
    server port=3389
    use multimon=1
    redirectdrives=1
    promptcredentialonce=1
    authentication level=0
    full address=rdsfarm.xxxxxxx.internal
    session bpp=16
    prompt for credentials on client=1
    redirectprinters=1
    drivestoredirect=*
    alternate shell=||OpenMind
    gatewayusagemethod=2
    alternate full address=rdsfarm.xxxxxx.internal
    workspace id=rdsgw.xxxxxxx.internal
    allow font smoothing=1
    redirectposdevices=0
    audiocapturemode=1
    gatewaycredentialssource=0
    remoteapplicationname=OpenMind 2.0
    devicestoredirect=*
    remoteapplicationmode=1
    remoteapplicationprogram=||OpenMind
    enablecredsspsupport=1
    redirectsmartcards=1
    redirectclipboard=1
    span monitors=1
    gatewayprofileusagemethod=1
    gatewayhostname=rds.xxxxxxx.sch.uk
    remoteapplicationcmdline=
    The log file looks very different now, all I am getting is:
    [2014-Jun-17 10:26:41] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Jun-17 10:26:41] RDP (0): lo0 af=18  addr= netmask=
    [2014-Jun-17 10:26:41] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Jun-17 10:26:41] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Jun-17 10:26:41] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Jun-17 10:26:41] RDP (0): gif0 af=18  addr= netmask=
    [2014-Jun-17 10:26:41] RDP (0): stf0 af=18  addr= netmask=
    [2014-Jun-17 10:26:41] RDP (0): en0 af=18  addr= netmask=
    [2014-Jun-17 10:26:41] RDP (0): en1 af=18  addr= netmask=
    [2014-Jun-17 10:26:41] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::21f:5bff:feb8:3f72%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Jun-17 10:26:41] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.65 netmask=255.255.255.0
    [2014-Jun-17 10:26:41] RDP (0): fw0 af=18  addr= netmask=
    [2014-Jun-17 10:26:41] RDP (0): --- END INTERFACE LIST ---
    [2014-Jun-17 10:26:41] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
    [2014-Jun-17 10:26:41] RDP (0): client version: 8.0.24875
    [2014-Jun-17 10:26:41] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Jun-17 10:26:41] RDP (0): correlation id: 9f18df13-7c84-dc4b-a780-e6b77a280000
    [2014-Jun-17 10:26:41] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Jun-17 10:26:41] RDP (0): ------ END ACTIVE CONNECTION ------
    [2014-Jun-17 11:44:15] RDP (0): *** Application terminated ***
    [2014-Jun-18 09:51:37] RDP (0): *** Application terminated ***
    [2014-Jun-19 12:00:19] RDP (0): *** Application terminated ***
    [2014-Jun-19 12:15:32] RDP (0): *** Application terminated ***
    [2014-Jun-19 12:16:21] RDP (0): *** Application terminated ***

  • How can I get the full VI path of a step?

    I can get the VI file name by with Step.TS.SData.ViCall.VIPath but is it possible to get the full path?
    CLD (2014)

    Hi,
    TestStand uses relative paths, so it never actually stores the full path to the VI unless you specify an absolute path.
    If you would like to find the full path of where it has been found, you can use the method Engine.FindFile or the expression function FindFile to find where TestStand is locating this file.
    Matt M
    NI

  • Remote desktop 8.0.14 (and prior) full screen RDweb session, screen pushed down by Mac Menu bar, mouse pointer on wrong position

    Hi
    On Mac OS X 10.10 Yosemite, there is a clear bug on the Microsoft Remote desktop app when
    a) remoting into a Windows server that is set to display full screen
    b) when you are logging in using a RDweb server aka RDS 2012.
    After logging in to the remote server, the full screen representation of the server desktop has the following issues:
    - The Mac Launchpad is still visible over the Windows desktop, making that part of the Windows desktop impossible to reach.
    - The published screen is pushed down about 15 pixels. It is pushed down by the Mac's menu that also remains visible.
    When I directly remote into the same server using traditional direct RDP (Not via the RDweb, gateway setup) the screen positions correctly. 
    I guess: Somehow the Remote desktop app  (8.0.14) does not seem to get the message from the server that this is a full screen session? Is there some information that the connection Broker or Gateway is not passing allong to
    the client? 
    I have replicated this many times. It is the same whether I connect to a 2012 server or to a 2008 server.
    Bart

    Hi,
    For a try you can use URI scheme for the specified desktop screen or full screen and check the result. You can refer the following article for information.
    Remote Desktop Client URI Scheme Support
    https://technet.microsoft.com/en-us/library/dn690096.aspx
    Apart if you have RD Gateway setup then you can try the option for RD Gateway to uncheck “Bypass RD Gateway for Local address” and verify result.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Computer name does not auto update in VMM console

    The computer name is not updating in VMM console after the following.
    - Create VM from scratch, install VM additions, name "VM1"
    - Shutdown VM
    - Clone "VM1"
    - Sysprep clone
    - Rename clone to "VM2"
    VMM does not recognize the new name even after a few VM reboots. I need to manually right click the VM and select refresh to get the new name to display.
    Typically this wouldn't be a problem, but it causes an issue when trying to Remote Desktop from VMM console or from App Controller, the old name is still referenced and therefore tries to remote desktop into old name instead of the new name.
    Anyone encounter this?

    Welcome to the discussions! (post #1 and all)
    <pre>hostname -s</pre>
    This command is the best way to get the short name of the machine with the DNS suffix stripped away.
    Do make sure you click edit in the sharing system preferences to make sure the Local Hostname is truly set and not using the dynamic global host name.
    I recall having to change this a while back and am not sure what the default state is for the fields in the Edit... dialog.

  • My contact names will not display with incoming calls

    I just received the I-phone 4S.  I had the 3GS.  I have synced properly on i-tunes, but now some of my contact names do not show up on incoming calls.  Help.

    I am assuming that you have associated a picture with the contact in the information for the contact

  • System Name is not coming

    Hi,
    I have created a new technical system in SLD. Now while I am creating a JCO connection for Metadata System Name is not coming.
    Message Server   : New technical System name is coming here
    System Name      : Its coming blank(It should have SID value)
    Logon Group      : Blank
    Regards,
    Prakash Jha

    Hi,
      please Configure the SLD Data Supplier in Visual Administrator.
    Refer http://help.sap.com/saphelp_nw04/helpdata/en/ea/cd2e807e0e45bf9da67354f452fc05/content.htm
    Hope that helps.
    Regards,
    S.Divakar

  • Name Error: The domain name does not exist

    Hi,
    I get this error when I try to create a view inside a web dynpro from se80 transaction
    " Name Error: The domain name does not exist. "
    Can anyone help me to solve this error ?
    Thanks !!

    Hi,
    did you carry out the necessary <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm">configuration</a> in your system? Note especially the need for fully qualified domain names (FQDN): <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm">FQDN</a>
    Regards, Heidi

  • Contact name is not displayed

    Hi Guys,
    Recently I bought BB Curve 8520. I transferred all my contacts from Sony Ericson w810i to BB curve. Using the method given in the following site.. " http://www.ehow.com/how_4543575_transfer-address-book-blackberry-phone.html ".
    I am facing a problem, whenever I get a call contact name is not getting displayed, but if I check call history it will display the contact name. Can anyone help me with this please.?
    Regards
    Sam

    Check this setting:  go to your contacts > options > general options> make sure sort by is set up to first or last name.    then check in address book options > filter and make sure you have no filters on...
    If that does not help try this:
    1) With the phone powered on
    2) Remove the battery, and then reinsert it after a few seconds.
    3) Replace the battery cover and wait several minutes for it to reboot
    Let me know if this helps
    >>>>>>>>>>>>>>>>>>>>>>>>~
    Hope I was able to help
    If you have received information that has helped you out, please give them Kudos.
    If your problem has been solved, please click on the post that resolved the issue

  • "Field name BUKRS not unique"  ???

    Hi,
    I am trying to create a view based on two tables. One is T001 and other is custom table. When i tried to activate, it gives error message like "Field names BUKRS not unique".
    Can anyone please tell me about this ?
    Thanks,
    Regards,
    aarthi
    [email protected]

    The description of the message given by the system is like below
    Field name BUKRS not unique
    Message no. MC 060
    Diagnosis
    When you define aggregates (views, lock objects or matchcode objects), you can assign the aggregate fields your own names (the system assigns names to the basic fields automatically). These names must be unique.
    System Response
    The system has established that the names assigned to the aggregate fields in an aggregate definition are not unique and issues an error message.
    Procedure
    Assign unique names to the aggregate fields in question.
    Regards,
    aarthi
    [email protected]

Maybe you are looking for