Re: 10.5: Create a custom Dock for the Guest account

Ready for consideration.

Hello,
I am not sure how I wound-up in the server forum. I am using the desktop version of OS X 10.7.4.
Thanks

Similar Messages

How can I create a custom environment for the guest user in Mavericks?

Hello Mavericks insiders
I need to setup several new MacBooks running Mavericks for school use. We want to use guest because everything is reset at each login. However, I first need to permanently customise the environment for the guest user:
- doing program first runs
- adjusting printer settings
- dock settings
- wallpper
I think I have to copy certain library files in the Terminal. Which files exactly? From where to where? What is the correct Terminal syntax to do so?
Many thanks in advance!
Morgy

Hello,
I am not sure how I wound-up in the server forum. I am using the desktop version of OS X 10.7.4.
Thanks

How can I create a custom dock for all users?

Hello,
I would like to create a custom dock for everyone that uses a certain Mac. I have found a bunch of stuff, but it is outdated. Most of the tutorials are for 10.4 or 10.5. I am using 10.7.4 and I have found nothing regarding that. Can anyone point me in the right direction?
Thanks in advance

Hello,
I am not sure how I wound-up in the server forum. I am using the desktop version of OS X 10.7.4.
Thanks

Is it possible to create a customs declaration for the document which is cleraed from customs

Hi Experts,
I want to generate a custom declaration for the declaration which is cleared from customs.
Is there any function module for this requirement.
Please post your suggestions ASAP.
Thanks
Srinivas

hi Srinivas,
It’s not possible to create a new declaration for a declaration that is
already accepted by customs. There could be below 2 possible options
1. U need inbound cancellation messages in the respective activity sequence,
and then u can request customs by mail or phone to send the cancellation
message. Once the cancellation message is received document gets cancelled and
u can create new declaration
2. U need a new optional activity sequence that will have outbound
cancellation message. once u trigger the cancellation message, customs will
reply back with the cancellation confirmation message and u can create a new
declaration
Hope this helps...
Regards,
Santosh

Creating a custom scale for current

Hi guys,
I need some help with creating a custom scale. I am reading motor current (analog I/P) and would like to display that on a graph and write it to a file. I need to use a linear scaling for custom scale. The slope is 2 and the intercept is 0. I've attache the code to make it clear what I am trying to acomplish. The way I've set it up right now is no scaling. There are 2 tasks in the code. I would like to create a custom scaling for the first task as seen in the attached code. I have done custom scaling using DAQ Assistant Express VI. But I dont see such options when I try to do the same with the DAQmx task. Please let me know how this can be done. Any help is greatly appreciated.
Thanks,
Raj
Solved!
Go to Solution.
Attachments:
Current_Voltage_RPM-_sub_VI-1.vi ‏18 KB

You both had me going nuts trying to figure how to get to that property. Basically just right click the DAQmx property node and "Select filter..." . This brings up the "Configure Filter Settings" where I chose 'show all attributes'. I could then get to the AI Custom Scale Name property.
Interestingly when you use the Property Browser and select the magnifying glass you can get to that property...but you just can't select it if you have the filter set incorrectly. Lesson Learned.
I also found this community example and that one.
Using LabVIEW 2010SP1 and TestStand 4.5

Setting dock apps in guest account

I created a guest account with the specific apps that I wanted to make available to a "guest user". When I restarted the mac and clicked on Guest, the dock had reverted back to factory default. Is this a glitch or is there a specific method of saving those settings in order to maintain them?

Parental Controls is the way you want to start for the Guest account.

Can dock items in Guest Account be changed "permanently"?

Is there a way for an administrator to add/delete items to/from the dock in the Guest Account and have those changes become the default? So far everything I change goes disappears with each logout of the Guest Account. I know that this is supposed to happen with the Guest. Thanks!

Okay, I used the information above and was able to make permanent changes to the dock on the user account. I learned the following lesson:
In order to do that you must be logged in as the Guest. The WM software, at least with my limited knowledge of how these things work, does not make permanent changes to the Guest account "remotely" via the administrator account. So it worked for me, and thanks for all the information.
I have another question though: My goal is to allow a Guest to go on the Internet. So I am making Safari available to Guest. I would like to make FireFox available also. But here is the problem:
Each time the two browsers start from scratch because all the cutomized files get deleted when the Guest logs out. This is specially more annoying with Firefox since its barebone lunch requires more steps before it actually begins working.
I want Safari or Firefox to open up in a Google page, and ready to go. What do I need to do to get the settings file get saved?
Thanks in advance.
Farzad

How to create a custom measure for each level of a dimension

Hi all!
Can Anyone please explain me with an example, how to create a custom measure for each level for a dimension? I dont mine if you use
one or more measures.
thanks in advance
hope someone helps me.

For example:I create a dimension for product_dim witch has 4 levels:total, class, family and item:
d_aben18
n1_aben18
n2_aben18
n3_aben18
n4_aben18
herarchy:h_aben18
cube:cubo_aben18
measure:med_aben18
I create this code to fetch the data to the dimension:
TRAP ON CLEANUP
SQL DECLARE c1 CURSOR FOR SELECT-
total_product_id,1,'N1_ABEN18',total_product_dsc,-
class_id,1,'N2_ABEN18',total_product_id,class_dsc,-
family_id,1,'N3_ABEN18', class_id, family_dsc,-
item_id,1,'N4_ABEN18',family_id,item_dsc-
FROM PRODUCT_DIM
"OPEN THE CURSOR
SQL OPEN c1
"FETCH THE DATA
SQL FETCH c1 LOOP INTO-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N1_aben18_LEVELDEF,:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N2_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N3_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N4_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
"SAVE THE CHANGES
UPDATE
COMMIT
CLEANUP:
SQL CLOSE c1
SHOW 'KK2'
Then I create a cube with use compression off, and in rules sum for example.
After, I create a measure and I select Override the aggregation specification for the cube, in rules I put nonadditive and I would like to create aprogram to assign distinct values to each level of the dimension. For example, I put 1, 2 3, and 4 values, but at the end I would like to put count(distinct(values)).
for that I create another program:
VRB D_RETURN DECIMAL
if D_ABEN18_N1_ABEN18_LEVELDEF eq 'N1_ABEN18'
then D_RETURN = 1
if D_ABEN18_N2_ABEN18_LEVELDEF eq 'N2_ABEN18'
then D_RETURN = 2
if D_ABEN18_N3_ABEN18_LEVELDEF eq 'N3_ABEN18'
then D_RETURN = 3
if D_ABEN18_N4_ABEN18_LEVELDEF eq 'N4_ABEN18'
then D_RETURN = 4
else d_return=26
return d_return
"SHOW D_RETURN
cubo_aben18_med_aben18_stored=d_return
but it doesnt work.I dont know how to put to assign or to see what I want.
I report the measure, or I report the program, but then how can I see the values of the measure?
thanks in advance

How to create a "Custom Color" for highlighting? (Acrobat XI)

March 10, 2014
How to create a "Custom Color" for highlighting? (Acrobat XI)
The numbers in the RGB and other fields change as various numbers are changed.
I wanted to create a pale orange:
Hue               13      Red      255
Saturation   240      Green 177
Luminosity    86       Blue     140
I'd selected one of the orange squares in the color grid, to display the general orange area of the slider.
I moved the slider to select a pale orange, which generated the above numbers.   Since this wasn't directly available to save to a Custom Color, I tried to edit the numbers. Unfortunately, the other numbers changed, making it impossible to actually create a color.
Any suggestions would be appreciated.
Note: I used Techsmith's Snagit to show screen shots in a Word document.
When I attempted to browse and upload the file, the error message said "[The content type of this image is not allowed.]"
OK...what images *are* allowed?

Hi Don,
I saw Gilad answered your question in another forum post.
Do you have everything you need at this point?
Let me know if you need further assistance.
Kind regards, Stacy

Possible to create a custom renderer for rendering standard component ?

This is in context for creating dynamic Data tables. Is it possible to create a custom Renderer for rendering component (standard) without creating a custom component?
namanc

Let's assume you want to create a custom renderer which will be used to render the error-messages (the h:messages tag). The component-family in this case is: javax.faces.Messages, the renderer-type javax.faces.Messages.
Therefor in your application's faces-config.xml add this renderer-statement (inside a render-kit, obviuosly):
<faces-config>

<render-kit>
    <renderer>
      <component-family>javax.faces.Messages</component-family>
      <renderer-type>javax.faces.Messages</renderer-type>
      <renderer-class>my.very.special.MessagesRenderer</renderer-class>
    </renderer>
</render-kit>

</faces-config>The code for MessagesRenderer is very dependent on your needs, therefor I will not post something here. Basically you need to extend javax.faces.render.Renderer. For help in that camp, surf to the online tutorials or get yourself a book (I learned a lot from Kito Mann's "JSF in Action"). Additionally grab the source for Sun's RI AND Myfaces and dig into that java-code. There is a huge learning potential looking at that source-material.
hth
Alexander

I am getting ready to sell a Mac app and I want to know what the specs are to create a custom background for my Mac App?

I am getting ready to sell a Mac app and I want to know what the specs are to create a custom background for my Mac App?
Here is a good example of what I am talking about: https://docs.google.com/file/d/0B28kNqQ8gmifRjRHam9wVnlrWG8/edit?usp=sharing

You need to post your question in the Apple Developer Forums

Create 1 customer master for some small customer

Hi All,
Our company have some small customer, sometime they buy our goods (may be they buy only one time). So we want create 1 customer master for them. Can we do it?

Dear ngocvt,
Transaction Code: V-07 - Create a one-time customer. (Account Group - CPDA)
One time customer / vendor accounts in SAP means they are account groups for customer/vendor and where in only the general data of the customer / vendor are stored instead of maintaining the bank data and other company code data that are relevant for other account groups which are useful for long run purposes.
As you know everything that is entered in SAP is saved in some TABLE. Now the customer & vendor master is such a table which holds vast amount of data.
The business secenario where the vendor or customer which are being in system only for 1 transaction, it is not advisable to have all the data maintained in main master.
Therefore SAP has provided with the feature of One time vendor / customer wherein in the document entry stage only you have to enter the name, address and other details of the vendor/customer.
The data, as far as I know' remains at doc level and does'nt go to the master tables.
If you want to change the standard functionality then go to
Transaction OBD2, u will find CPDA, that is standard one one time customer account group.
Copy it and make necessary changes.
Hope this Helps.
Thanks
Murtuza

Using Apache Commons HTTPClient to create a custom socket for Java mail

Does anyone know how to use Apache Commons HTTPClient to create a custom socket for Java mail. This is necessary for me to use NTLM authentication

JavaMail doesn't use HTTP.
If you want to add support for NTLM authentication to one of the standard protocols,
your best bet is to create a SASL provider, although note that only JavaMail's IMAP
provider uses SASL currently. The other protocols should add SASL support, but that
hasn't been done yet.

How to create a custom variable for a Label?

i need my label to store a string variable in it, do you know i can create a custom variable for it.
i mean for example if it's name is "StoredString" i can access it in my code by "label1.StoredString" just like "Label1.text" or something like that.

Thanks for pvdg42's help.
Hi soorena12,
Based on your issue, I suggest you can try the pvdg42's suggestion check your issue in your side.
If it still could not help you solve this issue, I suggest you can tell me which kind of application you create the label in the VS IDE?
What language you use to create for your application?
If you have any update message about your issue, please tell us.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Creating a Custom Task for an external application

Hi
I want to create a custom task for our records management system, that just opens a particular file people use from within Incident Management every day.
The file is of extension .tr5 (which is our records management tool). I can open the file on my desktop. When I create the custom task, using the same file - I get a message ' The specified executable is not a valid Win32 application'
I can open the application fine using the custom task, but not the file.
Could it because there is no relationship from SCSM to the file type?
Any suggestions are appreciated.

Are you using the executable exe file and the filename as a parameter in the custom task?
Andreas Baumgarten | H&D International Group

Re: 10.5: Create a custom Dock for the Guest account

Similar Messages

Maybe you are looking for