Re: Display format in ALV report
Hi Expert,
I have develop an alv report with some like lifnr,name1,dmbtr,budat,zterm, But my requiremnt is output should come in
the below format like
vendor number vendor name payment tern jan feb mar april ...................... upto december.
no value no value no value no value ..................
Abouce is my report format below jan i have two fields no and value for i have written code output is comming in alv but it
is not commig in the above format
My code is
TYPE-POOLS: SLIS.
TABLES: LFA1,BSAK,BSIK.
TYPES: BEGIN OF TY_LFA1,
LIFNR TYPE LFA1-LIFNR, "VENDOR NUMBER
NAME1 TYPE LFA1-NAME1, "VENDOR NAME
END OF TY_LFA1.
TYPES: BEGIN OF TY_BSIK,
LIFNR TYPE BSIK-LIFNR, "VENDOR NUMBER
DMBTR TYPE BSIK-DMBTR, "AMOUNT IN LOCAL CURRENCY
WMWST TYPE BSIK-WMWST, "TAX AMOUNT IN DOCUMENT CURRENCY
BUDAT TYPE BSIK-BUDAT, "POSTING DATE
ZTERM TYPE BSIK-ZTERM, "TERM OF PAYMENT
END OF TY_BSIK.
TYPES: BEGIN OF TY_OUTPUT,
LIFNR TYPE LFA1-LIFNR,
NAME1 TYPE LFA1-NAME1,
DMBTR TYPE BSIK-DMBTR,
BUDAT TYPE BSIK-BUDAT,
ZTERM TYPE BSIK-ZTERM,
NEW TYPE SY-DATUM,
END OF TY_OUTPUT.
SELECT T1~LIFNR
T1~NAME1
T2~DMBTR
T2~BUDAT
T2~ZTERM
INTO TABLE GT_OUTPUT FROM LFA1 AS T1 INNER JOIN BSIK AS T2
ON T1LIFNR = T2LIFNR
WHERE T1~LIFNR IN S_LIFNR
AND T2~BUDAT IN S_BUDAT
AND ZTERM NE ' '.
and then i have use alv function module REUSE_ALV_GRID_DISPLAY..........................
How to display the report in the above format
can any one throw some light in this..............
Regards,
Addu
Dear Koolspy,
You are correct i have check in the table BSIK their is one field called SHKZG for credit and debt please can you let me know how to wrtie this in my code my main logic is below.
SELECT T1~LIFNR
T1~NAME1
T2~DMBTR
T2~BUDAT
T2~ZTERM
INTO TABLE GT_OUTPUT FROM LFA1 AS T1 INNER JOIN BSIK AS T2
ON T1LIFNR = T2LIFNR
WHERE T1~LIFNR IN S_LIFNR
AND T2~BUDAT IN S_BUDAT
AND ZTERM NE ' '.
LOOP AT GT_OUTPUT INTO WT_OUTPUT.
WT_FINAL-LIFNR = WT_OUTPUT-LIFNR.
WT_FINAL-NAME1 = WT_OUTPUT-NAME1.
WT_FINAL-DMBTR = WT_OUTPUT-DMBTR. "Amount
WT_FINAL-NEW = WT_OUTPUT-BUDAT+4(2). "posting date
WT_FINAL-ZTERM = WT_OUTPUT-ZTERM.
APPEND WT_FINAL TO IT_FINAL.
CLEAR WT_FINAL.
ENDLOOP.
LOOP AT IT_FINAL INTO WT_FINAL.
COLLECT WT_FINAL INTO GT_OUTPUT5.
ENDLOOP.
LOOP AT GT_OUTPUT5 INTO WT_OUTPUT5.
WT_OUTPUT2-LIFNR = WT_OUTPUT5-LIFNR.
WT_OUTPUT2-NAME1 = WT_OUTPUT5-NAME1.
WT_OUTPUT2-DMBTR = WT_OUTPUT5-DMBTR.
WT_OUTPUT2-NEW = WT_OUTPUT5-NEW.
WT_OUTPUT2-ZTERM = WT_OUTPUT5-ZTERM.
IF WT_OUTPUT5-NEW = '01'. "2
MOVE WT_OUTPUT5-DMBTR TO WT_OUTPUT2-JAN.
"2
ELSEIF WT_OUTPUT5-NEW = '02'.
MOVE WT_OUTPUT5-DMBTR TO WT_OUTPUT2-FEB.
ELSEIF WT_OUTPUT5-NEW = '03'.
MOVE WT_OUTPUT5-DMBTR TO WT_OUTPUT2-MAR.
ELSEIF WT_OUTPUT5-NEW = '04'.
MOVE WT_OUTPUT5-DMBTR TO WT_OUTPUT2-APR.
ELSEIF WT_OUTPUT5-NEW = '05'.
MOVE WT_OUTPUT5-DMBTR TO WT_OUTPUT2-MAY.
ELSEIF WT_OUTPUT5-NEW = '06'.
MOVE WT_OUTPUT5-DMBTR TO WT_OUTPUT2-JUN.
ELSEIF WT_OUTPUT5-NEW = '07'.
MOVE WT_OUTPUT5-DMBTR TO WT_OUTPUT2-JUL.
ELSEIF WT_OUTPUT5-NEW = '08'.
MOVE WT_OUTPUT5-DMBTR TO WT_OUTPUT2-AUG. "5
ELSEIF WT_OUTPUT5-NEW = '09'. "
MOVE WT_OUTPUT5-DMBTR TO WT_OUTPUT2-SEP.
ELSEIF WT_OUTPUT5-NEW = '10'.
MOVE WT_OUTPUT5-DMBTR TO WT_OUTPUT2-OCT.
ELSEIF WT_OUTPUT5-NEW = '11'.
MOVE WT_OUTPUT5-DMBTR TO WT_OUTPUT2-NOV.
ELSEIF WT_OUTPUT5-NEW = '12'.
MOVE WT_OUTPUT5-DMBTR TO WT_OUTPUT2-DEC.
MODIFY GT_OUTPUT2 FROM WT_OUTPUT2.
ENDIF.
APPEND WT_OUTPUT2 TO GT_OUTPUT2.
collect WT_OUTPUT2 inTO GT_OUTPUT2.
COLLECT WT_FINAL INTO GT_OUTPUT5.
clear : wt_output2.
ENDLOOP.
Please let me know where to insert that SHKZG field.
Regards,
Am
Similar Messages
-
Hi All,
I wanted to do the formatting in ALV report output. How I can do that?
Formatting means colour the field, & all.
If possible send me any sample code..
Regards,
Poonamhi
Coloring a row is a bit (really a bit) more complicated. To enable row coloring, you should add an additional field to your list data table. It should be of character type and length at least 4. This field will contain the color code for the row. So, lets modify declaration of our list data table gt_list.
Code Part 13 Adding the field that will contain row color data
As you guess, you should fill the color code to this field. Its format will be the same as explained before at section C.6.3. But how will ALV Grid know that you have loaded the color data for the row to this field. So, you make it know this by 1/0: intensifiedon/off - - 1/0: inverseon/off
Color numbers
Internal table holding list data
DATA BEGIN OF gt_list OCCURS 0 .
INCLUDE STRUCTURE SFLIGHT .
DATA rowcolor(4) TYPE c .
DATA END OF gt_list .
Passing the name of the field containing color codes to the field INFO_FNAME of the layout structure.
e.g. ps_layout-info_fname = <field_name_containing_color_codes>. e.g. ROWCOLOR
You can fill that field anytime during execution. But, of course, due to the flow logic of screens, it will be reflected to your list display as soon as an ALV refresh occurs. You can color an entire row as described in the next section. However, this method is less time consuming.
Here is a sample program.
report zrich_0002 .
Use of colours in ALV grid (cell, line and column) *
Table
tables : mara.
Type
types : begin of ty_mara,
matnr like mara-matnr,
matkl like mara-matkl,
counter(4) type n,
free_text(15) type c,
color_line(4) type c, " Line color
color_cell type lvc_t_scol, " Cell color
end of ty_mara.
Structures
data : wa_mara type ty_mara,
wa_fieldcat type lvc_s_fcat,
is_layout type lvc_s_layo,
wa_color type lvc_s_scol.
Internal table
data : it_mara type standard table of ty_mara,
it_fieldcat type standard table of lvc_s_fcat,
it_color type table of lvc_s_scol.
Variables
data : okcode like sy-ucomm,
w_alv_grid type ref to cl_gui_alv_grid,
w_docking_container type ref to cl_gui_docking_container.
parameters : p_column as checkbox,
p_line as checkbox,
p_cell as checkbox.
at selection-screen output.
perform get_data.
perform fill_catalog.
if w_docking_container is initial.
perform create_objects.
endif.
*& Form create_objects
form create_objects.
create object w_docking_container
exporting
ratio = 60
exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6.
create object w_alv_grid
exporting
i_parent = w_docking_container.
Field that identify color line in internal table
move 'COLOR_LINE' to is_layout-info_fname.
Field that identify cell color in inetrnal table
move 'COLOR_CELL' to is_layout-ctab_fname.
call method w_alv_grid->set_table_for_first_display
exporting
is_layout = is_layout
changing
it_outtab = it_mara
it_fieldcatalog = it_fieldcat
exceptions
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
others = 4.
endform.
*& Form get_data
form get_data.
select * from mara up to 5 rows.
clear : wa_mara-color_line, wa_mara-color_cell.
move-corresponding mara to wa_mara.
add 1 to wa_mara-counter.
move 'Blabla' to wa_mara-free_text.
if wa_mara-counter = '0002'
and p_line = 'X'.
Color line
move 'C410' to wa_mara-color_line.
elseif wa_mara-counter = '0004'
and p_cell = 'X'.
Color cell
move 'FREE_TEXT' to wa_color-fname.
move '6' to wa_color-color-col.
move '1' to wa_color-color-int.
move '1' to wa_color-color-inv.
append wa_color to it_color.
wa_mara-color_cell[] = it_color[].
endif.
append wa_mara to it_mara.
endselect.
endform.
*& Form fill_catalog
form fill_catalog.
Colour code : *
Colour is a 4-char field where : *
- 1st char = C (color property) *
- 2nd char = color code (from 0 to 7) *
0 = background color *
1 = blue *
2 = gray *
3 = yellow *
4 = blue/gray *
5 = green *
6 = red *
7 = orange *
- 3rd char = intensified (0=off, 1=on) *
- 4th char = inverse display (0=off, 1=on) *
Colour overwriting priority : *
1. Line *
2. Cell *
3. Column *
data : w_position type i value '1'.
clear wa_fieldcat.
move w_position to wa_fieldcat-col_pos.
move 'MATNR' to wa_fieldcat-fieldname.
move 'MARA' to wa_fieldcat-ref_table.
move 'MATNR' to wa_fieldcat-ref_field.
append wa_fieldcat to it_fieldcat.
add 1 to w_position.
clear wa_fieldcat.
move w_position to wa_fieldcat-col_pos.
move 'MATKL' to wa_fieldcat-fieldname.
move 'MARA' to wa_fieldcat-ref_table.
move 'MATKL' to wa_fieldcat-ref_field.
Color column
if p_column = 'X'.
move 'C610' to wa_fieldcat-emphasize.
endif.
append wa_fieldcat to it_fieldcat.
add 1 to w_position.
clear wa_fieldcat.
move w_position to wa_fieldcat-col_pos.
move 'COUNTER' to wa_fieldcat-fieldname.
move 'N' to wa_fieldcat-inttype.
move '4' to wa_fieldcat-intlen.
move 'Counter' to wa_fieldcat-coltext.
append wa_fieldcat to it_fieldcat.
add 1 to w_position.
clear wa_fieldcat.
move w_position to wa_fieldcat-col_pos.
move 'FREE_TEXT' to wa_fieldcat-fieldname.
move 'C' to wa_fieldcat-inttype.
move '20' to wa_fieldcat-intlen.
move 'Text' to wa_fieldcat-coltext.
append wa_fieldcat to it_fieldcat.
endform.
Copy and paste this program, click a checkbox from the right and click execute. The program will color the line, column, or cell.
chk this 4 more info...
Re: add color in alv need help
regards
Satish -
How to get this output format in ALV report
Hi.
Can any one pls let me know how to get the following output format in ALV report.Following are the outputfields
companycode location position approver
300 800 01 watson
null null 03 candy
null null 04 smith
null null 05 michael
one empty line after this again
300 800 01 ryant
null null 02 gyan
null null 03 fermi
null null 04 ogata
*Note: Null indicates empty space .( i.e I need to get empty space in output where ever null is there.)
Thanks in advance.
Kind Regards,
samiulla.hi,
u can use 'REUSE_ALV_LIST_DISPLAY'
or
'REUSE_ALV_GRID_DISPLAY' function modules.
SAMPLE CODE :
*& Report Y101982CHD
* TABLES
TABLES: vbak. " standard table
* Type Pools *
TYPE-POOLS: slis.
* Global Structure Definitions *
*-- Structure to hold data from table CE1MCK2
TYPES: BEGIN OF tp_itab1,
vbeln LIKE vbap-vbeln,
posnr LIKE vbap-posnr,
werks LIKE vbap-werks,
lgort LIKE vbap-lgort,
END OF tp_itab1.
*-- Data Declaration
DATA: t_itab1 TYPE TABLE OF tp_itab1.
DATA : i_fieldcat TYPE slis_t_fieldcat_alv.
* Selection Screen *
*--Sales document-block
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln.
SELECTION-SCREEN END OF BLOCK b1.
*--Display option - block
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t02.
PARAMETERS: alv_list RADIOBUTTON GROUP g1,
alv_grid RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b2.
*file download - block
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-t03.
PARAMETERS: topc AS CHECKBOX,
p_file TYPE rlgrap-filename.
SELECTION-SCREEN END OF BLOCK b3.
* Initialization. *
* At Selection Screen *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_DXFILENAME_4_DYNP'
EXPORTING
dynpfield_filename = 'P_FILE'
dyname = sy-cprog
dynumb = sy-dynnr
filetype = 'P' "P-->Physical
location = 'P' "P Presentation Srever
server = space.
AT SELECTION-SCREEN ON s_vbeln.
PERFORM vbeln_validate.
* Start Of Selection *
START-OF-SELECTION.
*-- Fetching all the required data into the internal table
PERFORM select_data.
* End Of Selection *
END-OF-SELECTION.
IF t_itab1[] IS NOT INITIAL.
IF topc IS NOT INITIAL.
PERFORM download.
MESSAGE 'Data Download Completed' TYPE 'S'.
ENDIF.
PERFORM display.
ELSE.
MESSAGE 'No Records Found' TYPE 'I'.
ENDIF.
* Top Of Page Event *
TOP-OF-PAGE.
*& Form : select_data
* Description : Fetching all the data into the internal tables
* parameters : none
FORM select_data .
SELECT vbeln
posnr
werks
lgort
INTO CORRESPONDING FIELDS OF TABLE t_itab1
FROM vbap
WHERE vbeln IN s_vbeln.
IF sy-subrc <> 0.
MESSAGE 'Enter The Valid Sales Document Number'(t04) TYPE 'I'.
EXIT.
ENDIF.
ENDFORM. " select_data
*& Form : display
* decription : to display data in given format
* parameters : none
FORM display .
IF alv_list = 'X'.
PERFORM build_fieldcat TABLES i_fieldcat[]
USING :
*-Output-field Table Len Ref fld Ref tab Heading Col_pos
'VBELN' 'T_ITAB1' 10 'VBAP' 'VBELN' '' 1,
'POSNR' 'T_ITAB1' 6 'VBAP' 'POSNR' '' 2,
'WERKS' 'T_ITAB1' 4 'VBAP' 'WERKS' '' 3,
'LGORT' 'T_ITAB1' 4 'VBAP' 'LGORT' '' 4.
*CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'*
*EXPORTING*
*i_callback_program = sy-repid*
** i_callback_pf_status_set = c_pf_status*
*i_callback_user_command = 'USER_COMMAND '*
** it_events = t_alv_events[]*
*it_fieldcat = i_fieldcat[]*
*TABLES*
*t_outtab = t_itab1[]*
*EXCEPTIONS*
*program_error = 1*
*OTHERS = 2.*
*IF sy-subrc <> 0.*
** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO*
** WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.*
*ENDIF.*
ENDIF.
IF alv_grid = 'X'.
PERFORM build_fieldcat TABLES i_fieldcat[]
USING :
*-Output-field Table Len Ref fld Ref tab Heading Col_pos
'VBELN' 'T_ITAB1' 10 'VBAP' 'VBELN' '' 1,
'POSNR' 'T_ITAB1' 6 'VBAP' 'POSNR' '' 2,
'WERKS' 'T_ITAB1' 4 'VBAP' 'WERKS' '' 3,
'LGORT' 'T_ITAB1' 4 'VBAP' 'LGORT' '' 4.
*CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'*
*EXPORTING*
*i_callback_program = sy-repid*
** i_callback_pf_status_set = c_pf_status*
*i_callback_user_command = 'USER_COMMAND '*
*it_fieldcat = i_fieldcat*
*TABLES*
*t_outtab = t_itab1[]*
*EXCEPTIONS*
*program_error = 1*
*OTHERS = 2.*
*IF sy-subrc <> 0.*
** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO*
** WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.*
*ENDIF.*
*ENDIF.*
ENDFORM. " display
*& Form : vbeln_validate
* description : to validate sales document number
* parameters : none
FORM vbeln_validate .
DATA: l_vbeln TYPE vbak-vbeln.
SELECT SINGLE vbeln
FROM vbak
INTO l_vbeln
WHERE vbeln IN s_vbeln.
IF sy-subrc NE 0.
MESSAGE 'ENTER THE VALID SALES DOCUMENT NO:' TYPE 'I'.
EXIT.
ENDIF.
ENDFORM. " vbeln_validate
*& Form :build_fieldcat
* Description : This routine fills field-catalogue
* Prameters : none
FORM build_fieldcat TABLES fpt_fieldcat TYPE slis_t_fieldcat_alv
USING fp_field TYPE slis_fieldname
fp_table TYPE slis_tabname
fp_length TYPE dd03p-outputlen
fp_ref_tab TYPE dd03p-tabname
fp_ref_fld TYPE dd03p-fieldname
fp_seltext TYPE dd03p-scrtext_l
fp_col_pos TYPE sy-cucol.
*-- Local data declaration
DATA: wl_fieldcat TYPE slis_fieldcat_alv.
*-- Clear WorkArea
wl_fieldcat-fieldname = fp_field.
wl_fieldcat-tabname = fp_table.
wl_fieldcat-outputlen = fp_length.
wl_fieldcat-ref_tabname = fp_ref_tab.
wl_fieldcat-ref_fieldname = fp_ref_fld.
wl_fieldcat-seltext_l = fp_seltext.
wl_fieldcat-col_pos = fp_col_pos.
*-- Update Field Catalog Table
APPEND wl_fieldcat TO fpt_fieldcat.
ENDFORM. "build_fieldcat
*& Form : download
* description : To Download The Data
* Parameters : none
FORM download .
DATA: l_file TYPE string.
l_file = p_file.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = l_file
filetype = 'ASC'
TABLES
data_tab = t_itab1
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " download
HOPE IT WILL HELP YOU
REGARDS
RAHUL SHARMA -
hi,
what are the minimum requirements to display logo in alv report at the top of the page.
i searched forums but did n't get the required answer.Hi
This code is to display logo in the report through alv grid
*& Report ZALVDEMO *
REPORT ZALVDEMO.
TABLES : J_1IEXCHDR, " header table
J_1IEXCDTL, " item table
J_1IPART2, " Excise Part II details
LFA1, " vendor master table
J_1IMOVEND, " vendor excise details table
MSEG, " Document Segment: Material
MKPF, " Header: Material Document
DD07T, " domain text table
T001W. " Plant and Branch Details
DATA : BEGIN OF IT_CHDR OCCURS 100,
DOCNO LIKE J_1IEXCHDR-DOCNO,
DOCYR LIKE J_1IEXCHDR-DOCYR,
EXNUM LIKE J_1IEXCHDR-EXNUM,
EXDAT LIKE J_1IEXCHDR-EXDAT,
WERKS LIKE J_1IEXCHDR-WERKS,
EXBED LIKE J_1IEXCHDR-EXBED,
EXCCD LIKE J_1IEXCHDR-EXCCD,
ECS LIKE J_1IEXCHDR-ECS,
END OF IT_CHDR.
DATA : BEGIN OF IT_CDTL OCCURS 100,
DOCYR LIKE J_1IEXCDTL-DOCYR,
DOCNO LIKE J_1IEXCDTL-DOCNO,
EXNUM LIKE J_1IEXCDTL-EXNUM,
EXDAT LIKE J_1IEXCDTL-EXDAT,
LIFNR LIKE J_1IEXCDTL-LIFNR,
MATNR LIKE J_1IEXCDTL-MATNR,
MAKTX LIKE J_1IEXCDTL-MAKTX,
CHAPID LIKE J_1IEXCDTL-CHAPID,
EXBAS LIKE J_1IEXCDTL-EXBAS,
EXBED LIKE J_1IEXCDTL-EXBED,
ECS LIKE J_1IEXCDTL-ECS,
MENGE LIKE J_1IEXCDTL-MENGE,
MEINS LIKE J_1IEXCDTL-MEINS,
RDOC2 LIKE J_1IEXCDTL-RDOC2,
END OF IT_CDTL.
DATA TEXT(10).
DATA : BEGIN OF IT_OUT OCCURS 0,
SERIALNO LIKE J_1IPART2-SERIALNO,
TEXT1 LIKE TEXT,
EXNUM LIKE J_1IEXCDTL-EXNUM,
EXDAT LIKE J_1IEXCDTL-EXDAT,
NAME LIKE LFA1-NAME1,
DDTEXT LIKE DD07T-DDTEXT,
EXCCD LIKE J_1IEXCHDR-EXCCD,
BUDAT LIKE MKPF-BUDAT,
EXBAS LIKE IT_CDTL-EXBAS,
EXBED LIKE IT_CDTL-EXBED,
ECS LIKE IT_CDTL-ECS,
MATNR LIKE IT_CDTL-MATNR,
MAKTX LIKE IT_CDTL-MAKTX,
CHAPID LIKE IT_CDTL-CHAPID,
MENGE LIKE IT_CDTL-MENGE,
MEINS LIKE IT_CDTL-MEINS,
DEL_IND(1),
END OF IT_OUT.
DATA IT_PART2 LIKE J_1IPART2 OCCURS 0 WITH HEADER LINE.
DATA S_NO(4) .
DATA DB_CNT LIKE SY-TABIX.
DATA EBELN_T LIKE MSEG-EBELN .
TYPE-POOLS : SLIS.
DATA : AFIELD TYPE SLIS_FIELDCAT_ALV.
DATA : LIST_HEADER TYPE SLIS_T_LISTHEADER,
FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
LS_FTCAT TYPE LVC_S_FCAT,
SORTCAT TYPE SLIS_T_SORTINFO_ALV,
SORTCAT_LN LIKE LINE OF SORTCAT,
G_REPID LIKE SY-REPID,
G_BACK_GROUND(70), "like bapibds01-objkey,
GS_VARIANT LIKE DISVARIANT,
G_SAVE ,
GT_EVENTS TYPE SLIS_T_EVENT,
ALV_EVENT TYPE SLIS_ALV_EVENT,
EVENTCAT TYPE SLIS_T_EVENT,
EVENTCAT_LN LIKE LINE OF EVENTCAT,
LAYOUT_IN TYPE SLIS_LAYOUT_ALV,
LAYOUT_IN1 TYPE SLIS_LAYOUT_ALV.
CONSTANTS : GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE
'TOP_OF_PAGE',
GC_FORMNAME_USER_COMMAND TYPE SLIS_FORMNAME VALUE
'USER_COMMAND',
GC_FORMNAME_BEFORE_OUTPUT TYPE SLIS_FORMNAME VALUE
'BEFORE_OUTPUT'.
ALV_EVENT TYPE SLIS_ALV_EVENT,
DATA EX_NO LIKE IT_CHDR-EXNUM VALUE 0.
DATA REGTYP_1 LIKE J_1IPART2-REGTYP.
SELECTION-SCREEN BEGIN OF BLOCK B WITH FRAME.
PARAMETERS WERKS TYPE J_1IEXCHDR-WERKS.
SELECT-OPTIONS : BUDAT FOR J_1IEXCHDR-EXDAT.
PARAMETERS : R1 RADIOBUTTON GROUP GRP DEFAULT 'X',
R2 RADIOBUTTON GROUP GRP.
SELECTION-SCREEN END OF BLOCK B.
INITIALIZATION.
G_REPID = SY-REPID.
G_SAVE = 'A'.
PERFORM BUILD_EVENT USING GT_EVENTS[].
PERFORM ALV_EVENT_INIT.
AT SELECTION-SCREEN.
REFRESH LIST_HEADER.
PERFORM TOP_OF_PAGE_LIST_HEADER USING LIST_HEADER.
START-OF-SELECTION.
PERFORM ALV_EVENT_INIT.
G_REPID = SY-REPID.
G_BACK_GROUND = ' ' .
IF R1 = 'X'.
CLEAR R2. CLEAR : REGTYP_1.
REGTYP_1 = 'A'.
set titlebar 'BALAJI' with DB_CNT.
ELSEIF R2 = 'X'.
CLEAR R1.CLEAR : REGTYP_1.
REGTYP_1 = 'C'.
set titlebar 'BALAJI1' with DB_CNT.
ENDIF.
SELECT * FROM J_1IPART2
INTO CORRESPONDING FIELDS OF TABLE IT_PART2
WHERE REGTYP = REGTYP_1 AND
TRNTYP = 'GRPO' AND
BUDAT IN BUDAT.
DOCYR = IT_CDTL-DOCYR AND
DOCNO = IT_CDTL-DOCNO.
LOOP AT IT_PART2.
SELECT SINGLE * FROM J_1IEXCHDR
INTO CORRESPONDING FIELDS OF IT_CHDR
WHERE TRNTYP = 'GRPO' AND
DOCYR = IT_PART2-DOCYR AND
DOCNO = IT_PART2-DOCNO AND
WERKS = WERKS AND
exdat IN BUDAT.
ORDER BY EXDAT.
IF SY-SUBRC = 0.
APPEND IT_CHDR.
ELSE.
CONTINUE.
ENDIF.
IF SY-SUBRC <> 0.
MESSAGE E084.
ENDIF.
ENDLOOP.
LOOP AT IT_CHDR.
SELECT * FROM J_1IEXCDTL
INTO CORRESPONDING FIELDS OF IT_CDTL
FOR ALL ENTRIES IN IT_CHDR
WHERE
TRNTYP = 'GRPO' AND
DOCNO = IT_CHDR-DOCNO AND
DOCYR = IT_CHDR-DOCYR AND
EXNUM = IT_CHDR-EXNUM AND
EXDAT = IT_CHDR-EXDAT AND
WERKS = IT_CHDR-WERKS.
IF SY-SUBRC = 0.
APPEND IT_CDTL.
ELSE.
CONTINUE.
ENDIF.
ENDSELECT.
ENDLOOP.
LOOP AT IT_CDTL.
CLEAR TEXT.
DB_CNT = DB_CNT + 1.
READ TABLE IT_CHDR WITH KEY EXNUM = IT_CDTL-EXNUM.
READ TABLE IT_PART2 WITH KEY DOCNO = IT_CDTL-DOCNO .
IT_OUT-SERIALNO = IT_PART2-SERIALNO.
SELECT SINGLE NAME1 FROM LFA1
INTO IT_OUT-NAME
WHERE LIFNR = IT_CDTL-LIFNR.
SELECT SINGLE * FROM LFA1
WHERE LIFNR = IT_CDTL-LIFNR.
IF LFA1-LAND1 EQ 'IN'.
TEXT = 'INVOICE'.
IT_OUT-TEXT1 = TEXT.
ELSE.
TEXT = 'BOE'.
IT_OUT-TEXT1 = TEXT.
ENDIF.
SELECT SINGLE * FROM J_1IMOVEND
WHERE LIFNR = IT_CDTL-LIFNR.
SELECT SINGLE * FROM DD07T
INTO IT_OUT-DDTEXT
WHERE DOMNAME = 'J_1IVTYP' AND
DDLANGUAGE = 'EN' AND
DOMVALUE_L = J_1IMOVEND-J_1IVTYP.
IF DD07T-DDTEXT = 'First Stage Dealer of indigenous excisable goods'
OR
DD07T-DDTEXT = 'Second Stage Dealer of indigenous excisablegoods'.
DD07T-DDTEXT = 'Dealer'.
ENDIF.
IT_OUT-DDTEXT = DD07T-DDTEXT.
ELSEIF DD07T-DDTEXT = 'Second Stage Dealer of indigenous excisable
*goods'.
DD07T-DDTEXT =
CLEAR EBELN_T.
SELECT SINGLE LFBNR FROM MSEG
INTO EBELN_T
WHERE MBLNR = IT_CDTL-RDOC2 .
SELECT SINGLE * FROM MSEG
WHERE BWART = '106' AND
LFBNR = EBELN_T ."and
ebeln = ebeln_t.
IF SY-SUBRC = 0.
IT_OUT-DEL_IND = 'X'.
ELSE.
IT_OUT-DEL_IND = ' '.
ENDIF.
SELECT SINGLE BUDAT FROM MKPF
INTO IT_OUT-BUDAT
WHERE MBLNR = EBELN_T ."MSEG-LFBNR.
IT_OUT-EXNUM = IT_CDTL-EXNUM.
IT_OUT-EXDAT = IT_CDTL-EXDAT.
IT_OUT-EXCCD = IT_CHDR-EXCCD.
IT_OUT-EXBAS = IT_CDTL-EXBAS.
IT_OUT-EXBED = IT_CDTL-EXBED.
IT_OUT-ECS = IT_CDTL-ECS.
IT_OUT-MATNR = IT_CDTL-MATNR.
IT_OUT-MAKTX = IT_CDTL-MAKTX.
IT_OUT-CHAPID = IT_CDTL-CHAPID.
IT_OUT-MENGE = IT_CDTL-MENGE.
IT_OUT-MEINS = IT_CDTL-MEINS.
APPEND IT_OUT.
EX_NO = IT_CDTL-EXNUM.
ENDLOOP.
Title Portion
IF REGTYP_1 = 'A'.
SET TITLEBAR 'BALAJI' WITH DB_CNT.
ELSEIF REGTYP_1 = 'C'.
SET TITLEBAR 'BALAJI1' WITH DB_CNT.
ENDIF.
AFIELD-COL_POS = 1.
AFIELD-FIELDNAME = 'SERIALNO'.
AFIELD-SELTEXT_L = 'INPUTS'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 2.
AFIELD-FIELDNAME = 'TEXT1'.
AFIELD-SELTEXT_L = 'TYPE OF DOC'.
AFIELD-JUST = 'L'.
AFIELD-DECIMALS_OUT = '0'.
AFIELD-NO_ZERO = 'X'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 3.
AFIELD-FIELDNAME = 'EXNUM'.
AFIELD-SELTEXT_L = 'DOC.NO'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 4.
AFIELD-FIELDNAME = 'EXDAT'.
AFIELD-SELTEXT_L = 'DOC.DATE'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 5.
AFIELD-FIELDNAME = 'NAME'.
AFIELD-SELTEXT_L = 'NAME OF THE SUPPLIER'.
AFIELD-NO_ZERO = 'X'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 6.
AFIELD-FIELDNAME = 'DDTEXT'.
AFIELD-SELTEXT_L = 'TYPE-OF-SUPPLIER'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 7.
AFIELD-FIELDNAME = 'EXCCD'.
AFIELD-SELTEXT_L = 'ECC OF THE SUPPLIER'.
AFIELD-NO_ZERO = 'X'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 8.
AFIELD-FIELDNAME = 'BUDAT'.
AFIELD-SELTEXT_L = 'INPUT RECV DATE'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 9.
AFIELD-FIELDNAME = 'EXBAS'.
AFIELD-SELTEXT_L = 'ASSESSABLE-VALUE'.
AFIELD-DO_SUM = 'X'.
AFIELD-JUST = 'R'.
AFIELD-DECIMALS_OUT = '2'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 10.
AFIELD-FIELDNAME = 'EXBED'.
AFIELD-SELTEXT_L = 'DET OF CREDIT TAKEN CENVAT'.
AFIELD-JUST = 'R'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 11.
AFIELD-FIELDNAME = 'ECS'.
AFIELD-SELTEXT_L = 'DET OF CREDIT TAKEN E-CESS'.
AFIELD-JUST = 'R'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 12.
AFIELD-FIELDNAME = 'MATNR'.
AFIELD-SELTEXT_L = 'MATERIAL-CODE'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 13.
AFIELD-FIELDNAME = 'MAKTX'.
AFIELD-SELTEXT_L = 'DESCRIPTION'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 14.
AFIELD-FIELDNAME = 'CHAPID'.
AFIELD-SELTEXT_L = 'TARIFF-ID'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 15.
AFIELD-FIELDNAME = 'MENGE'.
AFIELD-SELTEXT_L = 'QUANTITY'.
AFIELD-JUST = 'R'.
AFIELD-DO_SUM = ' '.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 16.
AFIELD-FIELDNAME = 'MEINS'.
AFIELD-SELTEXT_L = 'UOM'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 17.
AFIELD-FIELDNAME = 'DEL_IND'.
AFIELD-SELTEXT_L = 'Deleted'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
* LAYOUT FOR ZEBRA CATLOG
LAYOUT_IN-COLWIDTH_OPTIMIZE = 'X'.
LAYOUT_IN-ZEBRA = 'X'.
LAYOUT_IN-GET_SELINFOS = 'X'.
LAYOUT_IN-CONFIRMATION_PROMPT = 'X'.
LAYOUT_IN-DETAIL_POPUP = 'X' .
SORTCAT-decimals = '0'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = G_REPID
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_SAVE = G_SAVE
IS_VARIANT = GS_VARIANT
IT_FIELDCAT = FIELDCAT
IT_SORT = SORTCAT
IS_LAYOUT = LAYOUT_IN
IT_EVENTS = EVENTCAT
I_BACKGROUND_ID = g_back_ground
TABLES
T_OUTTAB = IT_OUT.
*& Form TOP_OF_PAGE_LIST_HEADER
text
-->LIST_HEADERtext
FORM TOP_OF_PAGE_LIST_HEADER USING LIST_HEADER TYPE SLIS_T_LISTHEADER.
DATA : HLINE TYPE SLIS_LISTHEADER,
TEXT(60) TYPE C.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'ROOTS INDUSTRIES LTD' TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
SELECT SINGLE * FROM T001W WHERE WERKS = WERKS.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'PLANT :' TO TEXT.
WRITE WERKS TO TEXT+8.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-NAME1 TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-STRAS TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-ORT01 TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'DATE :' TO TEXT.
WRITE BUDAT-LOW TO TEXT+7.
IF BUDAT-HIGH NE ''.
WRITE 'TO' TO TEXT+18.
WRITE BUDAT-HIGH TO TEXT+22.
ENDIF.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
ENDFORM. "TOP_OF_PAGE_LIST_HEADER
*& Form ALV_EVENT_INIT
text
FORM ALV_EVENT_INIT .
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_TOP_OF_PAGE.
ALV_EVENT-FORM = 'ALV_TOP_OF_PAGE'.
APPEND ALV_EVENT TO EVENTCAT.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_TOP_OF_LIST.
ALV_EVENT-FORM = 'ALV_TOP_OF_LIST'.
APPEND ALV_EVENT TO EVENTCAT.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_END_OF_LIST.
ALV_EVENT-FORM = 'ALV_END_OF_LIST'.
APPEND ALV_EVENT TO GT_EVENTS.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_END_OF_PAGE.
ALV_EVENT-FORM = 'ALV_END_OF_PAGE'.
APPEND ALV_EVENT TO GT_EVENTS.
ENDFORM. "ALV_EVENT_INIT
*& Form ALV_TOP_OF_PAGE
text
FORM ALV_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = LIST_HEADER
I_LOGO = 'ENJOYSAP_LOGO'.
ENDFORM. "ALV_TOP_OF_PAGE
*& Form BUILD_EVENT
text
-->P_GT_EVENTS[] text
FORM BUILD_EVENT USING P_EVENTS TYPE SLIS_T_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = P_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_USER_COMMAND INTO
ALV_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_USER_COMMAND TO ALV_EVENT-FORM.
APPEND ALV_EVENT TO P_EVENTS.
ENDIF.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_BEFORE_LINE_OUTPUT INTO
ALV_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_BEFORE_OUTPUT TO ALV_EVENT-FORM.
APPEND ALV_EVENT TO P_EVENTS.
ENDIF.
ENDFORM. " BUILD_EVENT
this wud help u -
Hi please send code for displaying index in alv report
hi
thanx in advance.
code please for displaying index in alv report.
thanx
rockyadd one more field to ur internal table
index type i .
before u display ALV
loop at itab.
itab-index = sy-tabix.
modify itab index sy-tabix.
endloop.
Message was edited by:
chandrasekhar jagarlamudi -
Display output fields in Hierarchy format in ALV report
Hi,
I have a requirement to display the output fileds in ALV report, the output format is like this . The output field should be in ALV format, under each purchase order its corresponding line item should appear.
Pruchase Order 4700000581
company code item
9001 10
9001 20.
9001 30.
Pruchase Order 4700000174
9001 10
9001 20.
Can any one please help me how to do this in ALV report.Hi
This can be achieved using the Heirarchial ALV list
see the sample and do it
REPORT ZALV5_OBJECTS.
TABLES : EKKO.
TYPE-POOLS : SLIS.
TYPES : BEGIN OF TY_EKKO,
EBELN TYPE EKPO-EBELN,
EBELP TYPE EKPO-EBELP,
STATU TYPE EKPO-STATU,
AEDAT TYPE EKPO-AEDAT,
MATNR TYPE EKPO-MATNR,
MENGE TYPE EKPO-MENGE,
MEINS TYPE EKPO-MEINS,
NETPR TYPE EKPO-NETPR,
PEINH TYPE EKPO-PEINH,
END OF TY_EKKO.
DATA: IT_EKKO TYPE STANDARD TABLE OF TY_EKKO INITIAL SIZE 0,
IT_EKPO TYPE STANDARD TABLE OF TY_EKKO INITIAL SIZE 0,
IT_EMPTYTAB TYPE STANDARD TABLE OF TY_EKKO INITIAL SIZE 0,
WA_EKKO TYPE TY_EKKO,
WA_EKPO TYPE TY_EKKO.
DATA: OK_CODE LIKE SY-UCOMM, "OK-Code
SAVE_OK LIKE SY-UCOMM.
*ALV data declarations
DATA: FIELDCATALOG TYPE LVC_T_FCAT WITH HEADER LINE.
DATA: GD_FIELDCAT TYPE LVC_T_FCAT,
GD_TAB_GROUP TYPE SLIS_T_SP_GROUP_ALV,
GD_LAYOUT TYPE SLIS_LAYOUT_ALV.
*ALVtree data declarations
CLASS CL_GUI_COLUMN_TREE DEFINITION LOAD.
CLASS CL_GUI_CFW DEFINITION LOAD.
DATA: GD_TREE TYPE REF TO CL_GUI_ALV_TREE,
GD_HIERARCHY_HEADER TYPE TREEV_HHDR,
GD_REPORT_TITLE TYPE SLIS_T_LISTHEADER,
GD_LOGO TYPE SDYDO_VALUE,
GD_VARIANT TYPE DISVARIANT.
*Create container for alv-tree
DATA: GD_TREE_CONTAINER_NAME(30) TYPE C,
GD_CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
*Includes
*INCLUDE ZDEMO_ALVTREEO01. "Screen PBO Modules
*INCLUDE ZDEMO_ALVTREEI01. "Screen PAI Modules
*INCLUDE ZDEMO_ALVTREEF01. "ABAP Subroutines(FORMS)
*Start-of-selection.
START-OF-SELECTION.
ALVtree setup data
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_FIELDCATALOG.
PERFORM BUILD_LAYOUT.
PERFORM BUILD_HIERARCHY_HEADER CHANGING GD_HIERARCHY_HEADER.
PERFORM BUILD_REPORT_TITLE USING GD_REPORT_TITLE GD_LOGO.
PERFORM BUILD_VARIANT.
Display ALVtree report
CALL SCREEN 100.
*& Form data_retrieval
text
--> p1 text
<-- p2 text
FORM DATA_RETRIEVAL .
SELECT EBELN
UP TO 10 ROWS
FROM EKKO
INTO CORRESPONDING FIELDS OF TABLE IT_EKKO.
LOOP AT IT_EKKO INTO WA_EKKO.
SELECT EBELN EBELP STATU AEDAT MATNR MENGE MEINS NETPR PEINH
FROM EKPO
APPENDING TABLE IT_EKPO
WHERE EBELN EQ WA_EKKO-EBELN.
ENDLOOP.
ENDFORM. " data_retrieval
*& Form build_fieldcatalog
text
--> p1 text
<-- p2 text
FORM BUILD_FIELDCATALOG .
Please not there are a number of differences between the structure of
ALVtree fieldcatalogs and ALVgrid fieldcatalogs.
For example the field seltext_m is replace by scrtext_m in ALVtree.
FIELDCATALOG-FIELDNAME = 'EBELN'. "Field name in itab
FIELDCATALOG-SCRTEXT_M = 'Purchase Order'. "Column text
FIELDCATALOG-COL_POS = 0. "Column position
FIELDCATALOG-OUTPUTLEN = 15. "Column width
FIELDCATALOG-EMPHASIZE = 'X'. "Emphasize (X or SPACE)
FIELDCATALOG-KEY = 'X'. "Key Field? (X or SPACE)
fieldcatalog-do_sum = 'X'. "Sum Column?
fieldcatalog-no_zero = 'X'. "Don't display if zero
APPEND FIELDCATALOG TO GD_FIELDCAT.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'EBELP'.
FIELDCATALOG-SCRTEXT_M = 'PO Iten'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 1.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'STATU'.
FIELDCATALOG-SCRTEXT_M = 'Status'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 2.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'AEDAT'.
FIELDCATALOG-SCRTEXT_M = 'Item change date'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 3.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'MATNR'.
FIELDCATALOG-SCRTEXT_M = 'Material Number'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 4.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'MENGE'.
FIELDCATALOG-SCRTEXT_M = 'PO quantity'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 5.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'MEINS'.
FIELDCATALOG-SCRTEXT_M = 'Order Unit'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 6.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'NETPR'.
FIELDCATALOG-SCRTEXT_M = 'Net Price'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 7.
FIELDCATALOG-DATATYPE = 'CURR'.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'PEINH'.
FIELDCATALOG-SCRTEXT_M = 'Price Unit'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 8.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
ENDFORM. " build_fieldcatalog
*& Form build_layout
text
--> p1 text
<-- p2 text
FORM BUILD_LAYOUT .
GD_LAYOUT-NO_INPUT = 'X'.
GD_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
GD_LAYOUT-TOTALS_TEXT = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'
ENDFORM. " build_layout
*& Form build_hierarchy_header
text
<--P_GD_HIERARCHY_HEADER text
FORM BUILD_HIERARCHY_HEADER CHANGING
P_HIERARCHY_HEADER TYPE TREEV_HHDR.
P_HIERARCHY_HEADER-HEADING = 'Hierarchy Header'(013).
P_HIERARCHY_HEADER-TOOLTIP = 'This is the Hierarchy Header !'(014).
P_HIERARCHY_HEADER-WIDTH = 30.
P_HIERARCHY_HEADER-WIDTH_PIX = ''.
ENDFORM. " build_hierarchy_header
*& Form build_report_title
text
-->P_GD_REPORT_TITLE text
-->P_GD_LOGO text
FORM BUILD_REPORT_TITLE USING PT_REPORT_TITLE TYPE SLIS_T_LISTHEADER
P_GD_LOGO TYPE SDYDO_VALUE.
DATA: LS_LINE TYPE SLIS_LISTHEADER,
LD_DATE(10) TYPE C.
List Heading Line(TYPE H)
CLEAR LS_LINE.
LS_LINE-TYP = 'H'.
ls_line-key "Not Used For This Type(H)
LS_LINE-INFO = 'PO ALVTree Display'.
APPEND LS_LINE TO PT_REPORT_TITLE.
Status Line(TYPE S)
LD_DATE(2) = SY-DATUM+6(2).
LD_DATE+2(1) = '/'.
LD_DATE3(2) = SY-DATUM4(2).
LD_DATE+5(1) = '/'.
LD_DATE+6(4) = SY-DATUM(4).
LS_LINE-TYP = 'S'.
LS_LINE-KEY = 'Date'.
LS_LINE-INFO = LD_DATE.
APPEND LS_LINE TO PT_REPORT_TITLE.
Action Line(TYPE A)
CLEAR LS_LINE.
LS_LINE-TYP = 'A'.
CONCATENATE 'Report: ' SY-REPID INTO LS_LINE-INFO SEPARATED BY SPACE.
APPEND LS_LINE TO PT_REPORT_TITLE.
ENDFORM. " build_report_title
*& Form build_variant
text
--> p1 text
<-- p2 text
FORM BUILD_VARIANT .
Set repid for storing variants
GD_VARIANT-REPORT = SY-REPID.
ENDFORM. " build_variant
Reward points for useful Answers
Regards
Anji -
Data Displaying issue in ALV report
Hi,
I have made a ALV report, the presetn display layout is as below
it is displaying the material shortage reprot against issued production order
ORDER NO. Order Qty. MATERIAL TOTAL QTY SHORTAGE QTY
3000000 100 610 100 5
3000000 100 101 200 43
3000000 100 8795 400 400
3000000 100 456 100 67
3000001 50 548 50 33
3000004 62 710 62 3
3000005 15 7895 15 15
3000020 11 456 22 10
now the user requirement is the report should come as per below formate
AT EACH NEW ORDER NUMBER :
****************first display main order no. and order qty.
ORDER NO. Order Qty
3000000 100
************************then below this display the indiviual material and qty.
MATERIAL TOTAL QTY SHORTAGE QTY
610 100 5
101 200 43
8795 400 400
456 100 67
*******again at new order******
ORDER NO. Order Qty
3000001 50
**********then below display the items
MATERIAL TOTAL QTY SHORTAGE QTY
548 50 33
how to do this is there any output layout with this i can get this formate in LAV report
regards,
zafarHi Zafar,
You can populate your internal table as per the requirement.
at new order only.
itab-Order = 3000000 .
itab-Order quantity = 100.
append itab
for all materials for that order
itab-MATERIAL = 610 .
itab-TOTAL QTY = 100 .
itab-SHORTAGE QTY = 5.
append itab.
Cheers,
Suhail -
ME2L : still to be delivered is not displayed correctly in ALV report
Dear All,
The still to be delivered and still to be invoiced quantity is not being displayed correctly in ME2L report. In BEST format the report displayes the correct values. In the ALV form the quantity is same as the ordered quantity.
can anyone heIf the selection is the same for BEST layout and ALV layout then the results should equal.
if a field in ALV display has a different value than in the old list display, then it pretty much looks like a bug, and bugs can only be erased by program changes from SAP via OSS notes.
Check SAPNet for notes, open a message yourself to SAP if you dont find any. -
'@' not getting displayed in the ALV report
Hello,
I am facing a strange issue in the ALV report display. A string starting with '@' is not getting displayed and says "default icon " on the report. and this is varying from system to system for the same user.
can anyone please help me in resolving the issue.
Thanks in advance.
Thanks and Regards,
Santhosh Guptha N.@ is a default value as per ALV internal process. This is used in icons .
I think this is causing the confusion.
Check in the fieldcat if there is any adjsutment to be made to handle this.
Br,
Vijay -
Hi all Good Morning.
In ALV report am inserted my own icons. But the problem is at output screen am getting only those icons which i created, remaining are not displaying in standard tool bar .
Please tell me how to solve this. I want to display all default icons with my own created icons in standard tool bar .
Regards,
Prajwal K.
Edited by: prajwal k on Jan 24, 2008 4:39 AMHi Prajwal, this code will solve ur problem.
go to SE41.
Give SAPLKKBL as program name and STANDARD_FULLSCREEN as status....
now click on Copy Status and in that give ur program and status name into To.....
now in REUSE_ALV_GRID_DISPLAY
FORM display_list.
g_f_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = g_f_repid
i_callback_user_command = 'USER_COMMAND'
i_callback_pf_status_set = 'SET_STAT'
it_fieldcat = g_t_fieldcat[]
it_events = g_t_events[]
TABLES
t_outtab = g_t_itab
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " display_list
FORM set_stat USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZSTAT' EXCLUDING rt_extab.
ENDFORM. "set_stat
here my status name is ZSTAT which i gave in SE41...
and in user_command form...
FORM user_command USING u_comm LIKE sy-ucomm selfield TYPE slis_selfield.
CASE u_comm.
WHEN 'DET'.
........ur logic.........
ENDCASE.
ENDFORM. "user_command
kindly reward if found helpful.
cheers,
Hema. -
Regarding Selection Screen field making display field in ALV report
Hi All,
In ALV Report, at runtime how can i make the field as Display Field in selection screen .
Thks & Regds
Shaileshhii,
Go to se38 and give the below progra name execute.... check the source code it is very easy to understand.
1.demo_dynpro_modify_simple
2.demo_dynpro_modify_screen
if tou are using grid,u can refer to foll link
sequencing / choosing fields in report screen at runtime,
Display the Columns in the grid at run time
rgrds,
Shweta -
Hi all,
I want to change date format in ALV list that is displayed in wrong format.
I use this piece of code:
CALL METHOD r_alv_grid->set_table_for_first_display
EXPORTING
i_structure_name = 'ZSTANJEKOMISIONARA'
is_layout = gs_layout
CHANGING
it_outtab = it_stanja
EXCEPTIONS
OTHERS = 4.
Problematic field of structure ZSTANJEKOMISIONARA is defined like this:
VRIJEDI_DO ZEVO_VRIJEDI_DO DATS 8
Now, date is displayed like this: 09.20.3009 insted it should be like this: 30.09.2009.
How can I change this? Thanks.The data is internally stored in an external format. Go back to the program that filled this field, there is something missing there.
Look at FM like
- CONVERT_DATE_TO_INTERN_FORMAT
- CONVERSION_EXIT_PDATE_INPUT
You only keep date in external format when filling a BDC, for most other input mode (BAPI and the like) data must be converted to internal format.
Regards,
Raymond -
How to display icon in alv report output
hi,
my ewquirement in in alv report in one column to diaplay the icon(tickmark) based on some codition.
how to achieve it??
condition is
Affected (Locked on Current ECM) u2013 can use symbols for affected and for changing u2013
u2022 Lock AEOI u2013 CCLCK for AE01-OBJKT (Material) lock.
Condition:
If AEOI u2013 CCLCK is activated then display symbols (tickmark) in line of their AE01-OBJKT (Material). else display
(x mark)Hi,
In field catalog of grid set
Ex--
when 'Field'.
lwa_fcat-icon = c_true.
based on your condition
set the desired icon in table.
Ex.... lwa_table-field = icon_tick. -
Hi All,
I am using class 'cl_gui_alv_grid' to generate an alv report. I want to display status icons like red, yellow and green in one of the coulmns. Please let me know how to achieve the same.
Regards,
Navneeth K.Try to follow the below code.
Add
icon TYPE icon-id, "Status
to your output table
Constants
CONSTANTS: c_green TYPE icon-id VALUE '@08@',
c_yellow TYPE icon-id VALUE '@09@',
c_red TYPE icon-id VALUE '@0A@'.
Put your condition in which you want to display which color.
IF CONDITION.
MOVE c_yellow TO wa_out-icon.
MODIFY it_out
from wa_out.
ENDIF.
Add it in your catalog
FORM populate_fieldcat USING p_table TYPE c.
**status
CLEAR wa_fieldcat.
wa_fieldcat-tabname = p_table.
wa_fieldcat-fieldname = 'ICON'.
wa_fieldcat-seltext_l = text-010.
wa_fieldcat-outputlen = 15.
wa_fieldcat-icon = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
CALL METHOD g_grid->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
i_structure_name = 'MARA'
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
is_layout = gs_layout
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
CHANGING
it_outtab = it_out[]
IT_FIELDCATALOG = T_FIELDCAT
IT_SORT =
IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4. -
Problem in Data Display in Dynamic ALV Report
Hi all,
I am developing a Dynamic ALV report where I want display material batch (zjpack_base-charg) in column and Material (zjpack_base-matnr) & Qty (Zjpack_base-netwr) field row wise.My intention is to show report datewise for a material how many batch developed with there qty.I am sending you the code which i already wrote.Here column is developed batchwise but I am not able to show the qty against each batch.Please see my code and guide me how to display.
REPORT zdynamic_test .
*REPORT ztest_notepad.
*& Declarations
*Type-pools
TYPE-POOLS: slis.
*TABLES
TABLES: zjpack_base.
*Types
TYPES:
ty_fcat TYPE lvc_s_fcat,
ty_fcatalog TYPE slis_fieldcat_alv.
*Work areas
DATA:
wa_fcat TYPE ty_fcat,
wa_fcatalog TYPE ty_fcatalog.
*Internal tables
DATA:
it_fcat TYPE STANDARD TABLE OF ty_fcat,
it_fcatalog TYPE STANDARD TABLE OF ty_fcatalog.
*Type reference
DATA:
it_dyn_tab TYPE REF TO data,
wa_newline TYPE REF TO data.
*INTERNAL TABLE
DATA: BEGIN OF it_itab OCCURS 0.
INCLUDE STRUCTURE zjpack_base.
DATA: END OF it_itab.
*Filed symbols
FIELD-SYMBOLS:
<gt_table> TYPE STANDARD TABLE,
<fs_dyntable>,
<fs_fldval> TYPE ANY,
<l_field> TYPE ANY.
*Variables
DATA:
l_fieldname TYPE lvc_s_fcat-fieldname,
l_tabname TYPE lvc_s_fcat-tabname,
l_fieldtext TYPE lvc_s_fcat-seltext,
l_index TYPE char2.
"Selection-screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-s11 .
SELECT-OPTIONS:s_matnr FOR zjpack_base-matnr.
SELECT-OPTIONS:s_charg FOR zjpack_base-charg.
SELECT-OPTIONS:s_fdate FOR zjpack_base-fdate .
SELECTION-SCREEN END OF BLOCK b1.
PARAMETERS:
p_colms TYPE i.
*& start-of-selection.
START-OF-SELECTION.
PERFORM select_data.
PERFORM build_fieldcat.
PERFORM create_dynamic_table.
DO 20 TIMES.
DO p_colms TIMES.
l_index = sy-index.
CONCATENATE 'FIELD' l_index INTO l_fieldname.
ASSIGN COMPONENT l_fieldname OF STRUCTURE <fs_dyntable> TO <l_field>.
<l_field> = sy-index.
ENDDO.
INSERT <fs_dyntable> INTO TABLE <gt_table>.
ENDDO.
LOOP AT it_itab.
l_index = sy-tabix.
CONCATENATE 'FIELD' l_index INTO l_fieldname.
ASSIGN COMPONENT l_fieldname OF STRUCTURE <fs_dyntable> TO <l_field>.
<l_field> = it_itab-matnr.
INSERT <fs_dyntable> INTO TABLE <gt_table>.
ENDLOOP.
LOOP AT it_fcat INTO wa_fcat.
PERFORM fieldcatalog1 USING: wa_fcat-fieldname
wa_fcat-tabname
wa_fcat-seltext.
ENDLOOP.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = 'ZTEST_NOTEPAD'
it_fieldcat = it_fcatalog
TABLES
t_outtab = <gt_table>.
*& Form BUILD_FIELDCAT
FORM build_fieldcat .
CLEAR: l_fieldname,
l_tabname,
l_fieldtext,
l_index.
DO p_colms TIMES.
CLEAR l_index.
l_index = sy-index.
CONCATENATE 'FIELD' l_index INTO l_fieldname.
CONCATENATE 'Field' l_index INTO l_fieldtext.
l_tabname = '<GT_TABLE>'.
PERFORM fieldcatalog USING: l_fieldname
l_tabname
l_fieldtext.
ENDDO.
ENDFORM. " BUILD_FIELDCAT
*& Form CREATE_DYNAMIC_TABLE
FORM create_dynamic_table .
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fcat
IMPORTING
ep_table = it_dyn_tab.
ASSIGN it_dyn_tab->* TO <gt_table>.
Create dynamic work area and assign to FS
CREATE DATA wa_newline LIKE LINE OF <gt_table>.
ASSIGN wa_newline->* TO <fs_dyntable>.
ENDFORM. " CREATE_DYNAMIC_TABLE
*& Form FIELDCATALOG
FORM fieldcatalog USING field table f_txt.
wa_fcat-fieldname = field.
wa_fcat-tabname = table.
wa_fcat-seltext = f_txt.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ENDFORM. " FIELDCATALOG
*& Form FIELDCATALOG1
FORM fieldcatalog1 USING field table f_txt.
wa_fcatalog-fieldname = field.
wa_fcatalog-tabname = table.
wa_fcatalog-seltext_m = f_txt.
APPEND wa_fcatalog TO it_fcatalog.
CLEAR wa_fcatalog.
ENDFORM. " FIELDCATALOG1
*& Form SELECT_DATA
text
--> p1 text
<-- p2 text
FORM select_data .
DATA: v_srlno TYPE i.
SELECT matnr charg blqty
INTO CORRESPONDING FIELDS OF it_itab
FROM zjpack_base
WHERE matnr IN s_matnr
AND charg IN s_charg
AND fdate IN s_fdate.
COLLECT it_itab.
ENDSELECT.
v_srlno.
LOOP AT it_itab.
v_srlno = v_srlno + 1.
ENDLOOP.
CLEAR: l_fieldname,
l_tabname,
l_fieldtext,
l_index.
1st Field
l_index = sy-tabix.
CONCATENATE 'FIELD' '1' INTO l_fieldname.
l_fieldtext = 'MATNR'.
l_tabname = '<GT_TABLE>'.
PERFORM fieldcatalog USING: l_fieldname
l_tabname
l_fieldtext.
Other fields
LOOP AT it_itab.
CLEAR l_index.
l_index = sy-tabix + 1.
CONCATENATE 'FIELD' l_index INTO l_fieldname.
CONCATENATE 'CHARG-' it_itab-charg INTO l_fieldtext.
l_tabname = '<GT_TABLE>'.
PERFORM fieldcatalog USING: l_fieldname
l_tabname
l_fieldtext.
ENDLOOP.
Please guide me how my problem will solve.
Thanks & Regards
NirmalHi all, I am developing a Dynamic ALV report where I want display material batch (zjpack_base-charg) in column and Material (zjpack_base-matnr) & Qty (Zjpack_base-netwr) field row wise.My intention is to show report datewise for a material how many batch developed with there qty.I am sending you the code which i already wrote.Here column is developed batchwise but I am not able to show the qty against each batch.Please see my code and guide me how to display.
*& Report ZDYNAMIC_TEST *
REPORT zdynamic_test .
*REPORT ztest_notepad.
*& Declarations
*Type-pools
TYPE-POOLS: slis.
*TABLES
TABLES: zjpack_base.
*Types
TYPES:
ty_fcat TYPE lvc_s_fcat,
ty_fcatalog TYPE slis_fieldcat_alv.
*Work areas
DATA:
wa_fcat TYPE ty_fcat,
wa_fcatalog TYPE ty_fcatalog.
*Internal tables
DATA:
it_fcat TYPE STANDARD TABLE OF ty_fcat,
it_fcatalog TYPE STANDARD TABLE OF ty_fcatalog.
*Type reference
DATA:
it_dyn_tab TYPE REF TO data,
wa_newline TYPE REF TO data.
*INTERNAL TABLE
DATA: BEGIN OF it_itab OCCURS 0.
INCLUDE STRUCTURE zjpack_base.
DATA: END OF it_itab.
*Filed symbols
FIELD-SYMBOLS:
<gt_table> TYPE STANDARD TABLE,
<fs_dyntable>,
<fs_fldval> TYPE ANY,
<l_field> TYPE ANY.
*Variables
DATA:
l_fieldname TYPE lvc_s_fcat-fieldname,
l_tabname TYPE lvc_s_fcat-tabname,
l_fieldtext TYPE lvc_s_fcat-seltext,
l_index TYPE char2.
"Selection-screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-s11 .
SELECT-OPTIONS:s_matnr FOR zjpack_base-matnr.
SELECT-OPTIONS:s_charg FOR zjpack_base-charg.
SELECT-OPTIONS:s_fdate FOR zjpack_base-fdate .
SELECTION-SCREEN END OF BLOCK b1.
PARAMETERS:
p_colms TYPE i.
*& start-of-selection.
START-OF-SELECTION.
PERFORM select_data.
PERFORM build_fieldcat.
PERFORM create_dynamic_table.
* DO 20 TIMES.
* DO p_colms TIMES.
* l_index = sy-index.
* CONCATENATE 'FIELD' l_index INTO l_fieldname.
* ASSIGN COMPONENT l_fieldname OF STRUCTURE <fs_dyntable> TO <l_field>.
* <l_field> = sy-index.
* ENDDO.
* INSERT <fs_dyntable> INTO TABLE <gt_table>.
* ENDDO.
LOOP AT it_itab.
l_index = sy-tabix.
CONCATENATE 'FIELD' l_index INTO l_fieldname.
ASSIGN COMPONENT l_fieldname OF STRUCTURE <fs_dyntable> TO <l_field>.
<l_field> = it_itab-matnr.
INSERT <fs_dyntable> INTO TABLE <gt_table>.
ENDLOOP.
LOOP AT it_fcat INTO wa_fcat.
PERFORM fieldcatalog1 USING: wa_fcat-fieldname
wa_fcat-tabname
wa_fcat-seltext.
ENDLOOP.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = 'ZTEST_NOTEPAD'
it_fieldcat = it_fcatalog
TABLES
t_outtab = <gt_table>.
*& Form BUILD_FIELDCAT
FORM build_fieldcat .
* CLEAR: l_fieldname,
* l_tabname,
* l_fieldtext,
* l_index.
* DO p_colms TIMES.
* CLEAR l_index.
* l_index = sy-index.
* CONCATENATE 'FIELD' l_index INTO l_fieldname.
* CONCATENATE 'Field' l_index INTO l_fieldtext.
* l_tabname = '<GT_TABLE>'.
* PERFORM fieldcatalog USING: l_fieldname
* l_tabname
* l_fieldtext.
* ENDDO.
ENDFORM. " BUILD_FIELDCAT
*& Form CREATE_DYNAMIC_TABLE
FORM create_dynamic_table .
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fcat
IMPORTING
ep_table = it_dyn_tab.
ASSIGN it_dyn_tab->* TO <gt_table>.
* Create dynamic work area and assign to FS
CREATE DATA wa_newline LIKE LINE OF <gt_table>.
ASSIGN wa_newline->* TO <fs_dyntable>.
ENDFORM. " CREATE_DYNAMIC_TABLE
*& Form FIELDCATALOG
FORM fieldcatalog USING field table f_txt.
wa_fcat-fieldname = field.
wa_fcat-tabname = table.
wa_fcat-seltext = f_txt.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ENDFORM. " FIELDCATALOG
*& Form FIELDCATALOG1
FORM fieldcatalog1 USING field table f_txt.
wa_fcatalog-fieldname = field.
wa_fcatalog-tabname = table.
wa_fcatalog-seltext_m = f_txt.
APPEND wa_fcatalog TO it_fcatalog.
CLEAR wa_fcatalog.
ENDFORM. " FIELDCATALOG1
*& Form SELECT_DATA
* text
* --> p1 text
* <-- p2 text
FORM select_data .
* DATA: v_srlno TYPE i.
SELECT matnr charg blqty
INTO CORRESPONDING FIELDS OF it_itab
FROM zjpack_base
WHERE matnr IN s_matnr
AND charg IN s_charg
AND fdate IN s_fdate.
COLLECT it_itab.
ENDSELECT.
* v_srlno.
* LOOP AT it_itab.
* v_srlno = v_srlno + 1.
* ENDLOOP.
CLEAR: l_fieldname,
l_tabname,
l_fieldtext,
l_index.
* 1st Field
* l_index = sy-tabix.
CONCATENATE 'FIELD' '1' INTO l_fieldname.
l_fieldtext = 'MATNR'.
l_tabname = '<GT_TABLE>'.
PERFORM fieldcatalog USING: l_fieldname
l_tabname
l_fieldtext.
* Other fields
LOOP AT it_itab.
CLEAR l_index.
l_index = sy-tabix + 1.
CONCATENATE 'FIELD' l_index INTO l_fieldname.
CONCATENATE 'CHARG-' it_itab-charg INTO l_fieldtext.
l_tabname = '<GT_TABLE>'.
PERFORM fieldcatalog USING: l_fieldname
l_tabname
l_fieldtext.
ENDLOOP.
ENDFORM. " SELECT_DATA
Maybe you are looking for
-
Unique ID in ABAP stack across all Envrionment.
In ABAP Stack is there any table which uniquely identifies one interface mapping across all environments. The requirement is to get a unique ID in ABAP stack (this needs to be hard-coded in an ABAP mapping) which is common in all environment. There i
-
How can I delete old back-ups SAP/Oralce from TSM?
Hi all, How can I set an expiration date for old back-ups so that they are deleted when reached that date? For our R/3 Enterprise 4.7 on Oracle 9.2.0.7 / AIX 5.2 we use TSM & Backint. BR0278I Command output of '/usr/sap/<SID>/SYS/exe/run/backint
-
Hi at all, who can help me to manipulate idocs with the BADI: IDOC_DATA_MAPPER or who knows an useful doc. I´ve tried the following code to mod the company code. But nothing happens. DATA: _data TYPE edid4, wa_maptab TYPE IDOC_CHANG. CHECK
-
Another "Edit In Photoshop CS3" Problem?
I've scanned other threads and although I found similar entries, I couldn't find an answer to the following: When (in LR2.0 and LR2.1) I "Edit in Adobe Photoshop CS3" (by right clicking), the selected image correctly opens up in CS3. I can then edit
-
Removing photo album from desktop
I accidentally moved a photo album to my desktop and would like to remove it. How do I do that?