Re-generate and/or re-activate

If I add a new field to the end of a custom data base table (Z table) and there are programs that already use the Z table but will not care about the new field added to the end of the Data Base definition, do I have to re-generate and/or re-activate these programs?

Hi,
No need to do any thing, you just adjust the data base.
using the menu UTILITIES->DATA BASE UTILITY->
click on ACTIVATE AND ADJUST .
this will do.
nothing else required.
regards
vijay

Similar Messages

Smart Form Generate and Activate

Hi Experts!
Can anyone explain me wat's the difference between Generate and activate in Smart forms?
Thanks!

Hi,
firstly you are creating smart form is nothing but generate. after syntax check complete u wll activate the smartform. whenever if you activate the smartform it wll create a one function module it(function module) encapsulate all the attributes of that particular form. this is nothing but activation.
thanks.
sriram.

How to create table.maint.generator and enduser should use using ztcode

Hi,
can any one guide me how to create table maintanence generator and after creating,enduser must use using ztcode.
any help can be appreciated.
Thanks & Regards,
Sandeep.

Hi,
Table Maintenance generator is required to do Manual entries in the Table. If the requirement is to update the table only programmatically and not manually then table maint. generator is not required.
Manual entries in table can be maintained ( New record can be inserted / existing can be modified ) using transaction SM 30, if the table maintenance for the table is generated.
How to activate Table maint.
Goto SE11 and open the table.
Click UTILITIES -> Table Maint. Generator, Enter the details and click on Save. Then activate the table.
chk a sample 1.
refer.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
some more helps
Check out this thread:
table maintenance
http://help.sap.com/saphelp_erp2005/helpdata/en/a7/513520407a11d1893b0000e8323c4f/frameset.htm - a link for basics on Table Maintenance.
Also, Check out this weblog on table maintenance:
/people/sudheer.cheedella/blog/2006/02/20/extracting-data-in-table-maintenance
<b>how to create a a T-code of that</b>
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
WRITE
viewname = give ur table name.
show = X
save and check it once...
now u can able to call ur table through ur new t.code...
rgds
anver
if hlped pls mark points

What is the use of table maintance generator and how it is used ddic

hi dear friends
i would like to know about how the table maintaience generator is used in ddic .i have the step by step processor of that but i would like to know importance and advantages of it .

Nani,
With the help of the table maintenance generator, you are able to maintain the ENTRIES of the table in SM30 transaction.
It can be set in transaction SE11 - Tools - Table maintenance generator.
Table maintanance Generator is used to manually input values using transaction sm30
follow below steps
1) go to se11 check table maintanance check box under attributes tab
2) utilities-table maintanance Generator-> create function group and assign it under
function group input box. Also assign authorization group default &NC& .
3) select standard recording routine radio in table table mainitainence generator to move table
contents to quality and production by assigning it to request.
4) select maintaience type as single step.
5) maintainence screen as system generated numbers this dialog box appears when you click on create button
6) save and activate table
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
SM30 is used for table maintenance(addition or deletion of records),
For all the tables in SE11 for which Table maintenance is selected , they can be maintained in SM30
Sm30 is used to maintain the table ,i.e to delete ,insert or modify the field values and all..
It creates the maintenance screen for u for the aprticular table as the maintenance is not allowed for the table..
In the SE11 delivery and maintenance tab, keep the maintenance allowed..
Then come to the SM30 and then enter the table name and press maintain..,
Give the authorization group if necessary and give the function group and then select maintenance type as one step and give the screen numbers as system specified..
Then create,,,
Then u will able to see the maintenance view for the table in which u can able to insert and delete the table values...
We use SM30 transaction for entering values into any DB table.
First we create a table in SE11 and create the table maintenance generator for that Table using (utilities-> table maintenance generator) and create it.
Then it will create a View.
After that from SM30, enter the table name and Maintain, create new entries, change the existing entries for that table.
For further help look into these links
http://help.sap.com/saphelp_46c/helpdata/EN/cf/21eb6e446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/69/c2516e4ba111d189750000e8322d00/content.htm
Table
Don't forget to reward if useful.....

Embed eForm on Frontend of Site, Generate and Store Accomplished PDF

Hi Everyone,
My company is thinking about purchasing Adobe Acrobat X Pro, but we're on the fence since we're not sure which variant of the product to buy, nor are we sure if its even capable of doing what we need it to do.
I've tried doing the live-chat a couple of times, but no luck. And the wait-time for the calls might as well be eternity.
If anyone can tell me if what we want is possible, and what we need to accomplish it (do we need to buy anything, how do we integrate the application to our framework?), we'd really appreciate it.
Basically it's like this. We have a couple of PDFs of blank forms that we use at the office. We want to make online versions of these forms that we will have up on our website.
Whenever a client fills-out the form and clicks submit, we want the accomplished (with answers) PDF to be generated and/or stored on the server.
We were able to use a trial version of the Acrobat X Pro just fine and we were able to select the blanks and set them as fields... but after that, we don't know how to move on. Is there anyway to store this on Adobe's server and embed it on our site? Can we convert this to HTML?
Afterwards, when the client submits, the data is sent to which database? Do we need to retreive it (from where) so we can create the PDFs ourselves? Or is there an Adobe Service for this?
Our main concern is that the final product (accomplished PDF) should be identical to the original PDF we had. The eForm/Online-form itself can be redesigned so it looks better on a webpage.
Any suggestions? Are we on the right track?
Thanks!
Justin

When you say "You can then gather, organize, download, etc. the data at Acrobat.com as you wish.", how do we do this? I tried using the offline TRACKER applet (I have one on my PC), which had a Portfolio that auto-synced with Acrobat.com. I could export to CSV, and extract individual PDFs from the Portfolio, which was cool.
But is there any way to do the same operations online (no need to Adobe Acrobat on your PC)... I'm thinking of portability issues (our site admin's might need to maintain the site from a different laptop while on the go, for example.
Is there an area on the actual http://acrobat.com/ website that tracks my distributed forms and the responses, allows me to export to CSV, and extract individual PDFs?
Thanks!
Justin

I have no service and i cant activate my iphone 3gs after update to ios 5.0.1 can anyone help ??

i have no service and i cant activate my iphone 3gs after update to ios 5.0.1 can anyone help ??

touch me wrote:
it says ICCID: unknown
Not a good sign. Try forcing the phone into recovery mode & restoring it. If this fails, make an appointment at an Apple store:
Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

I have an Ipod Touch and when I activate the shuffle mode it keeps replaying the same song. How do I fix this problem?

have an Ipod Touch and when I activate the shuffle mode it keeps replaying the same song. How do I fix this problem?

While playing any song on your iPod, tap the artwork to bring up the scrubber bar and additional controls. On the left hand side is a option for repeat. You want to make sure this icon is white (meaning it is set to Off). If it isn't tap it either one or two times to change its current setting.
Any luck there?
By the way, this is the iPod Shuffle forum. Since you have an iPod Touch, you should have posted this in the iPod Touch forum.
B-rock

My old computer had itunes and downloaded songs that I put on my ipod. My old computer got replaced years ago without saving hard drive info or passwords and my iPod burnt out and will not activate. How can I get access to my old songs on new computer.

My old computer had itunes and downloaded songs that I put on my ipod. Well, my old computer got replaced years ago without saving hard drive info or passwords and my iPod burnt out years ago and will not activate. I now have a new computer and iPod and I have an iTunes account on my iPhone5. How can I get access to my old songs on new computer? Are they lost for good? I have no info about my old computer and old account.

Downloading past purchases from the App Store ... - Support - Apple

HT1414 C apple i need to know few things,first of all i shall tell my scenario. I got an iphone 3gs from my uncle in US. I m at india k. well , in that iphone it showing activation screen and trying to activate. not more than that..plz help!

C Apple, i need to know few things,first of all i shall tell my scenario. I got an iphone 3gs from my uncle in US..after long waiting. I m from south india, living at God's country called Kerala k. well , in that iphone it showing activation screen and trying to activate. not more than that..plz help!
means.. in simple words, it is trying to activate and all( searching wifi,, taking few minutes..again searching...if it couldnt find any wifi - telling .. try connect using itunes an all)...well any way. finally I try connect to a wifi network, with full speed...3mbps..from Ravi's internet cafe in downtown.
All after Im getting the below message from that white candy box!( thats all I can use now, because, in my dreams iPhone is something great, that mankind ever seen....but this really disappointed me......im simpling blinking!!(same with itunes too)
""Your iphone could not be activated because the activation server is temporarily unavailable. try connecting your iphone to itunes to activate it, or try again in a couple of minutes.
If this problem persists, contact apple support at apple.com/support""
EVERYDAY .EVERTIME.. I C this message and sleep....no use.....and i use to charge that 'white candy box' to c this message!
I try searching internet and all for solutn...but no one knw about it..but there are...some one me abt method called jailbreaking ..rednw..white snw ..ultrasnw and all...I dnt knw why it is so complicated to troublesht...apple is suppose to be simple and friendly.
C why u manufacturing these stuffz like this, if does'nt serve the any of its purpose ....or useable to any of its features atleast....C i wont be that disapppointed, if u put an option to playbck music or video during activation and all...
If you are responsible for manfacturing such unuseable thing, then its ur responsible to destroy it too.....
anyway now everyone knws that ..I have an apple iphone with me, but that doest make me proud at all...
Finally I have only few questions to ask...
1 will it work with my vodafone sim in kerala?
2 is any way , i can hear any music out frm it?
3 will i become a proud iPhone user?
I am already fedup with asking questions..begging for an solution.....
I hope so you can help to figure it out, without any complications....thank u!

It was not legitimately unlocked by the carrier it was originally locked to. ONLY the carrier it is locked to can authorize unlocking it.
In order to allow it to be used on a different carrier, the phone was hacked or jailbroken. An unauthorized modification was made to the phone. That modification has damaged the phone. You can not get support for it here or from Apple.

I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification until and unless i activate the "Show on Lock Screen" which was not same as in the earlier software version.Help plz

I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification center when my phone is locked until and unless i activate the "Show on Lock Screen" under each application. which was not same as in the earlier software version.I dnt want my messages or watsapp msges to be displayed on home screen when locked but should be displayed on the notification center on lock condition.
Please suggest a solution or @Apple please get a software release which can remove this bug .

We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

Bought a new iphone and i cant activate it unless the previous owner deletes the account from their icloud but i lost contact with the previous owner how can i fix this?

bought a new iphone and i cant activate it unless the previous owner deletes the account from their icloud but i lost contact with the previous owner how can i fix this?

Take it back where you got and and get your money back.
As has been pointed out, if there was a "previous owner", the phone is not "new". Thephone you purchased is most likely stolen. If whoever you bought it from won't give you your money back, turn it over to the police.

After 1 year earned leave should generate and pro-rata quota should generate next year on jan 1st.

Hi Experts,
Here is the client requirement and please let me know how to solve this.
Earned Leave: after 1 year earned leave should generate and pro-rata quota should generate next year on jan 1st.
Example: if employee joins on 01/07/2012 after 1 year i.e 01/07/2013 quota should generate 22 days next year on 01/01/2014 pro-rata quota i.e 01/07/2013, 11 days pro-rata quota should generate. Total 22+11 =33 have to generate on 01/01/2014. and next year 01/01/2015 (22+11+22)=55.
Note: on 1/7/2013 = 22 days
on 1/1/2014 = 11 days +22 days; total=33
on 1/1/2015 = 33 days +22 days; total=55
Conditions: if employee joins before 15th date of current month include the current month, if employee joins after 15th date exclude the current month.

You will need 2-3 PCRs to address this.
In one PCR you need to query the Date of Hire (from IT0041 - I guess you are maintaining this) using HRS=YDAYxx - where xx is the date type. You can then check it it is the first year anniversary or not by using HRS?01. If the condition satisfies populate a custom time type with 22 days.
In another PCR, you need to check for 01 Jan by using HRS=BCURMO and HRS=BCURDY. In this PCR check again the length of service (see above). If it is more than 1, then proceed to give the pro-rata amount.
If the pro-rata formula is simple you can use the second PCR or you would need a 3rd PCR to get the pro rata amount. Using HRS=Y**** operator you can query many date differences which will help.
Regards
Pramod

HT201269 I got a replacement Iphone5 from Apple. I went home and tried to synced it with ITunes but had to register as a new device to do update then I can restore old back up, now can't back up old phone info and can't activate my Apple ID for iMessage

I got a replacement Iphone5 from Apple. I went home and tried to synced it with ITunes but said to register as a new device to do update then I can restore old back up, now can't back up old phone info and can't activate my Apple ID for iMessage

Can you clarify your problem? Are you having trouble restoring your new iPhone from a previous phone's backup? Or are you having trouble logging into iMessage?

I recieved a message that MSVCR80.ddl was missing and iTunes would activate. After reinstalling iTunes, I'm receiving an "Error 7 (Windows error 126)" msg. What should I do?

I recieved a message that MSVCR80.ddl was missing and iTunes would activate. After reinstalling iTunes, I'm receiving an "Error 7 (Windows error 126)" msg. What should I do?

Hello, Jack.
You will find this article helpful in troubleshooting the error that you are receiving.
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/ts3074
Regards,
Jason H.

I have deactivated XPro on one machine and need to activate on this one

I have deactivated XPro on one machine and need to activate on this one

And "this one" refers to what? You need to explain better and provide the necessary technical information liek operating system and so on.
Mylenium

Re-generate and/or re-activate

Similar Messages

Maybe you are looking for