Re: LSMW. adding selection screen

HI,
I have to write an conversion program in LSMW
in the field mapping and conversion rules i have updated the select fields.. but..
how to change the text element and selection texts
Thanks in advance
Guhapriyan

Hello,
As the conversion program is a program created by SAP at run time we will not be able to put the selection texts, Since the name of conversion program will be in SAP std., namespace.
An alternate solution would be to use:
SELECTION-SCREEN COMMENT 1(20) 'COMMENT'.
Hope this helps,
Best Regards, Murugesh AS

Similar Messages

Error in adding selection screen fields

Hi All,,
I am getting error when i add a selection screen parameters in module pool.
I copied stadard program to custom one, when I add an input field to screen it gives information message saying
"Selection screen: Report generation makes screen changes ineffective".
If though if i add the selection screen, when i relogin newly added screeen disappears.
Can any one y this is happening?

Hi,
You can find a lot of posts on the SDN. Please search for them.
[What create docking container on a subscreen?]
[Query Regarding 'cl_gui_docking_container'] are a few

Adding selection screen elements at run time

Hi,
I have a selection screen with four drop down list which has 20 elements.
When i select any element from drop down, i must be able to add some other UI in the same line.
DD1
DD2
DD3
DD4
If i choose a first item in DD1,
DD1 Lable1 IP1 lable2 IP2
DD2
DD3
DD4
these lables and input fields are not known till selecting the item.
Will i be able to do this in selection screen?
Thanks
Vimalraj

Have a look at this Report. you have to Capture events on User Command and modify the screen accordingly.
REPORT ztesttt.
PARAMETERS: test1(10) TYPE c MODIF ID sc1,
            test2(10) TYPE c MODIF ID sc2,
            test3(10) TYPE c MODIF ID sc1,
            test4(10) TYPE c MODIF ID sc2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-group1 = 'SC1'.
      screen-active = '1'.
      MODIFY SCREEN.
      CONTINUE.
    ENDIF.
    IF screen-group1 = 'SC2'.
      screen-ACTIVE = '0'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.

Adding Selection Screen Fields in IQ09

Hi All,
My requirement is to add a selection screen field on screen of transaction code IQ09. Also , I need to filter records based on the same.
Is this feasible ?
Thanks
Harsh

Hi Harsh,
Please use the Enhancment framework.
Use the Implicit or the Explicit Enhancement Options and then add the Additional Field on the screen.
you can then use the Source code plug-ins to modify the code.
Regards,
Deepak.

Adding Selection Screen in Screen - URGENT

Hi All,
Could someone help me define a select option field in my screen?
Thanks..

hi tin,
the following code may help you
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
SELECT-OPTIONS:
             s_vkorg FOR vbak-vkorg OBLIGATORY, " Sales Org.
             s_auart FOR vbak-auart,             " Sales order Type
             s_vbeln FOR vbak-vbeln,             " Sales Order Number
             s_erdat FOR vbak-erdat NO-EXTENSION," Order create Date
             s_ernam FOR vbak-ernam matchcode object
                                      user_addr.   " Created by
PARAMETERS : p_run TYPE BAPIVBRKTESTRUN-TESTRUN.   " Test mode
SELECTION-SCREEN END OF BLOCK b1.
reward points if found helpful

Adding a new field to selection screen -Effect on variant

Hello,
If we add a new (non obligatory) field to a slection screen, is there any impact on existing variants? Does SAP regenerate each variant when the screen change transport get applied? We had a DB lock jam situation in our PRD system for VARI table and the previous day some program changes with a added selection screen parameter ( a check box) had moved).
Regards,
Hari.

Adding a field to the selection screen shouldn't affect existing variants (but the field will be blank for all variants). However, if there is a problem, you should be able to retrieve variants with program RSVARDOC_610.
Rob

Adding a new field to the selection screen of a LDB

Hi all,
I want to add a new field Clearing date(BSEG-AUGDT) in the dynamic selection screen of the report RFUMSV00.
For adding a new field i have copied the SAP view of a Logical database to CUS view.
Next i had added the Clearing date(BSEG-AUGDT) to the function group Document header(01) and selected the check box Preselect and saved the view.
But still i am not able to find the newly added field in the dynamic selection screen of the report.
Please suggest me where i am going wrong or how to do this.
Thanks in advance
Ajay

Hi Srini,
Thanks for your Reply
I have kept 01 against the field BSEG-AUGDT and selected the preselect check box also.
But still that field is not visible in the dynamic selection screen.
Thanks
Ajay.D

Error V0 104 while adding select option on customized screen

Hi all,
I have a screen added on the standard transaction IW21 (with selection screen definition and called like subscreen). On this screen I have some SELECT-OPTIONS and when I press the button of selecting multiple values, I get the following message: "Requested function & is not available here" (V0 104), where & is long number starting with %..I have added entries to the tables T185F and T185 with the transaction VFBS, but I dont know how to assign the Function codes to SELECT-OPTIONS..
Thanks in advance for feedback!
Anna
Edited by: Anna L on Jul 16, 2008 11:03 AM

Just an explanation: no matter the error message I get, the values are transferred correctly from the multiple selection screen to my screen.
I hope somebody got similar case and can give me some hint...
Thank you,
Anna

Adding check box in selection screen

Hi all,
I have to add a check box to the previous report, I need to fetch the data based on the checkbox. Please tell me how to proceed further with flag set.
Thanx and Regards,
Line.

Hi..
1) do u want this? if checkbox is not checked then no data is read from database and if checked then only data wil be fetched -
tables pa0001.
parameters p_check as checkbox.
data: begin of itab occurs 0.
include structure pa0001.
data end of itab.
start-of-selection.
if p_check = 'X'.
perform read_data.
endif.
if itab[] is not initial.
loop at itab.
write:/ itab-pernr.
endloop.
else.
write: 'No data fetched from database,may be u need to check the Checkbox'.
endif.
*&      Form read_data
      text
--> p1        text
<-- p2        text
FORM read_data .
select * from pa0001 into table itab up to 20 rows.
ENDFORM.                    " read_data
2) Adding fields based on Chekbox -
parameters: p_check AS CHECKBOX MODIF ID ABC USER-COMMAND CH.
parameters: p_pernr like pa0001-pernr modif ID ABD,
            P_DATE LIKE PA0001-BEGDA MODIF ID ABD.
Check sy-ucomm = 'CH'.
AT SELECTION-SCREEN OUTPUT.
loop at screen.
if p_CHECK = 'X'.
   if screen-group1 = 'ABD'.
      SCREEN-ACTIVE = '1'.
      MODIFY SCREEN.
   ENDIF.
ELSE.
if screen-group1 = 'ABD'.
     SCREEN-ACTIVE = '0'.
     MODIFY SCREEN.
     ENDIF.
ENDIF.
ENDLOOP.

Adding new modules to Selection-screen

Hi everyone,
I created 3 selection-screens for my report, but I needed to control better their jump between screens, so I added PAI modules on each screen.
The thing is that when I make a change on one of the screens the calling of the module disapears, so I just kept on placing the calls and avoided the change in the screens.
No the problem is, when I transported my report to the quality system, everything was fine, with my modules in my code. Now I transported a change and in the quality system, the calls where lost.
Any ideas how to transport everything?!
Thanks

You must not modify the screen (add PAI or PBO) with a program type 1 (report).
If you want to modify screen, you change your program type module pool and create the screens.
Salu2.

Added field to dynamic selection screen does not work in FBL5N

hi,
we have added KNA1-KATR5 to the selection screen of FBL5N by using logical database DDF using "view CUS" but it does not work.
Our system is 6.0
is there any OSS note or program that we should add?
many thx.

Refer This:
Additional field selections in FB03

Adding a message to the variable selection screen

Hi there
I have been asked to find a way to add a message to the variable selection screen.
It appears that DIVISION needs to be added to the selection screen, as this makes the query run faster. However, they don't actually want the user to enter a division, as this causes other problems.
So, ideally, I would be able to add a message to the variable selection screen that advises users against entering a value for division.
I don't know how to do this.
I create the web template, and I can therefore add messages or anything you like to the template, but I don't believe I have any control over the variable selection screen.
Does anyone know if this is possible?
We are running a 2004s system if that helps.
Cheers,
Andrew

Hello,
Well i think if you make the variable used for division not ready for input it would not be available for the users to input anything.
you can find the checkbox for this in the properties of the variable in query designer.
Hope this matches your requirement.
Regds,
Shashank

Adding layout variant to selection screen

Hi all,
         Currently I am working on report program, where I have to allow user to select his own output pattern. i.e layout variant is to be added to selection screen. The report uses object oriented ALV for display purpose. [set_table_for_first_display]
I made following steps,
1.     Declared one parameter of type disvariant.
2.     At selection-screen on value-request I called function REUSE_ALV_VARIANT_F4.
3.     Passed internal table to method set_table_for_first_display.
Now I am able to create save new variant, on selection screen I can select the variant that I have created, but output shows the all the fields though
Only few are selected. Please tell me any modification so as to reflect the changes in output.
I am searching for a function which maintains fieldcat according to user defined variant.
Regards,
Nilesh kulkarni.

U have to use REUSE_ALV_VARIANT_EXISTENCE inorder to use the layout u have selected
After ur code of REUSE_ALV_VARIANT_F4.
try this way
AT SELECTION-SCREEN.
   PERFORM PAI_OF_SELECTION_SCREEN.
G_REPID = SY-REPID.
G_SAVE = 'A'.
FORM PAI_OF_SELECTION_SCREEN .
IF NOT P_LAYOUT IS INITIAL.
    MOVE G_VARIANT TO GX_VARIANT.
    MOVE P_LAYOUT TO GX_VARIANT-VARIANT.
    CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
         EXPORTING
              I_SAVE     = G_SAVE
         CHANGING
              CS_VARIANT = GX_VARIANT.
    G_VARIANT = GX_VARIANT.
ELSE.
    PERFORM VARIANT_INIT.
ENDIF.
ENDFORM.                    " PAI_OF_SELECTION_SCREEN
FORM variant_init .
CLEAR G_VARIANT.
G_VARIANT-REPORT = G_REPID.
ENDFORM.                    " variant_init
Then when u call ALV for display, pass ur display variant, in this case = g_variant
Reward if useful
Cheers
~Arun
Message was edited by:
        Arun Shekhar

Adding fields to vendor selection screen

Hi ,
While creating a shopping cart from SRM portal, i need to select a vendor. For vendor selection screen, i want to add two additional fields: 1)Sort Term 1: ADDR1_DATA-SORT1 2)Order Currency: LFM1-WAERS
I want to know:if this can be possible by doing any SRM config in SPRO in SRM or is it a development work in which fields would be added to structure.
Please reply asap and also the procedure to do that.
Regards,
Bis

Hi.
Have you read SAP Note 672960? This describes how to add customer defined fields to the shopping cart, therefore also visible during the SC creation process. You would probably also need to implement the BBP_DOC_CHANGE_BADI to fill in the requested data in your new fields.
DM

Adding fields to the selection screen of IW38

We have added some fields to the CI_AUFK include, they have also been added to the RIHAUFK_LIST structure. Currently the new fields appear in the ALV when the report is run.
What I need to do is add them to the selection screen.
Has anyone done this? I have been looking for a user exit etc, no luck.
Thanks, Mike

Why not use the new enhancement framework?
Goto the main program in SE38 and click on the Enhance button - spiral icon (Shift+F4) and try to add new selections at the appropriate by implementing the appropriate enhancement.
I am sure you can achieve it using enhancement spots.
cheers,
Aabhas

Re: LSMW. adding selection screen

Similar Messages

Maybe you are looking for