RE: NT Server Reboot and Forte Partitions[Ref:C943460]

Hi Bradley.
At our customers, we need one of our Forte applications to be running for data
communications to take place. After a reboot, we need this application's
partitions to come online. The way we did this (as you suggested) was to use a
BAT file, and then install this as an NT service (we used a utility that comes
with the NT resource kit - srvany).
This works fine for us. One of the issues we had was that the partitions tried
to come online before Oracle was running - this resulted in the dbsessions
failing and the partitions not coming online. We got round this by preceding
starting the partitions with a loop that polled Oracle until it was up. Needless
to say, piping all output to log files was essential for us to figure out what
was going on.
Hope this helps,
Steve Elvin
Systems Developer
Frontline Ltd.
UK
-----Original Message-----
From: INTERNET [email protected]
Sent: Monday, November 02, 1998 11:04 PM
To: Steve Elvin; X400
p=NET;a=CWMAIL;c=GB;DDA:RFC-822=Forte-Users(a)sagesoln.com;
Subject: NT Server Reboot and Forte Partitions [Ref:C943460]
I have a system administration question for users with NT servers in
their Forte environment. If I have installed Forte partitions on an NT
server which I would like to startup when the server is rebooted, then
what are my options for scripting this to happen automatically?
Currently the only Forte process on the server which starts up
automatically is the Forte node manager, through the installed NT
service. I have been contemplating setting up a BAT file process as an
NT service which would wait for the Forte node manager service to start,
and then execute an fscript file to start the required forte partitions.
How is this situation being handled in other environments? Thanks.
Bradley K Wells
Strong Capital Management, Inc
[email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi Brad,
I am not sure if this is the right solution in the long run, but if you
login into NT after reebot you can create a simple client that "pings" your
service objects and put the shortcut into the Startup Group. I think such a
client may also be useful to monitor your Forte server for application
specific parameters, instead of relying only on logs/econsole.
David
At 04:18 PM 11/2/98 -0600, you wrote:
I have a system administration question for users with NT servers in
their Forte environment. If I have installed Forte partitions on an NT
server which I would like to startup when the server is rebooted, then
what are my options for scripting this to happen automatically?
Currently the only Forte process on the server which starts up
automatically is the Forte node manager, through the installed NT
service. I have been contemplating setting up a BAT file process as an
NT service which would wait for the Forte node manager service to start,
and then execute an fscript file to start the required forte partitions.
How is this situation being handled in other environments? Thanks.
Bradley K Wells
Strong Capital Management, Inc
[email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Similar Messages

  • NT Server Reboot and Forte Partitions

    I have a system administration question for users with NT servers in
    their Forte environment. If I have installed Forte partitions on an NT
    server which I would like to startup when the server is rebooted, then
    what are my options for scripting this to happen automatically?
    Currently the only Forte process on the server which starts up
    automatically is the Forte node manager, through the installed NT
    service. I have been contemplating setting up a BAT file process as an
    NT service which would wait for the Forte node manager service to start,
    and then execute an fscript file to start the required forte partitions.
    How is this situation being handled in other environments? Thanks.
    Bradley K Wells
    Strong Capital Management, Inc
    [email protected]
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Hi Brad,
    I am not sure if this is the right solution in the long run, but if you
    login into NT after reebot you can create a simple client that "pings" your
    service objects and put the shortcut into the Startup Group. I think such a
    client may also be useful to monitor your Forte server for application
    specific parameters, instead of relying only on logs/econsole.
    David
    At 04:18 PM 11/2/98 -0600, you wrote:
    I have a system administration question for users with NT servers in
    their Forte environment. If I have installed Forte partitions on an NT
    server which I would like to startup when the server is rebooted, then
    what are my options for scripting this to happen automatically?
    Currently the only Forte process on the server which starts up
    automatically is the Forte node manager, through the installed NT
    service. I have been contemplating setting up a BAT file process as an
    NT service which would wait for the Forte node manager service to start,
    and then execute an fscript file to start the required forte partitions.
    How is this situation being handled in other environments? Thanks.
    Bradley K Wells
    Strong Capital Management, Inc
    [email protected]
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

  • Server reboot and Oracle shutdown.

    First, thanks for helps about my CAN'T ADD DATAFILE INTO TABLESPACE which was posted in July.
    Our university Oracle technical support team said that, the reason that we can't new datafile into tablespace is: the database is corrupt, some blocks corrupted.
    The reason why the database corrupted is that: we don't shutdown Oracel before we reboot our database server.
    Our database server is Windows Server 2003. Oracle is Enterprise Edition Release, 10g, 10.1.0.2.
    Is this statement correct: before to shutdown the database server (in our case, Windows Server), the Oracle instance or Oracle needs to be shutdown first?
    If the above statement is true, will the database corrupt if we don't follow the above statement?
    Thanks,

    That probably is not the reason why it was corrupt (although it is Windows).
    How often do you restart your database server? is it on a frequency or only when absolutely needed (installing Microsoft patches and getting the message "you must restart your system .... ").
    It is a good practice to shutdown cleanly the database before powerdown. At the very least change the setting of ORA_<your_sid_here>SHUTDOWNTIMEOUT registry key to something more appropriate. The default is probably not good.

  • NFS: server reboot - client problem with "file handle" - no unmont

    Hello,
    when I restart a NFS-server and a client has a NFS-share on it still mounted, that NFS-share becomes unusable on the client: everything causes the client complain about an old "file handle", even trying to unmount that share!
    So my question is: How to deal gracefully with a NFS-server reboot and avoiding this file handle problem?
    Apart from going to each client and unmount the NFS-share by hand?
    Thanks!

    Do I need to Give these values manually again as they are moved from Env to other?
    When we transport ID objects, the values stored in the channel get lost and have to be manually enetered......it happens even for DEV --> QA environment.
    Now your channel should reflect PROD-related data.
    2- Why my Receiver communiation channel coimg as
    Communication Channel | PRD_400 | RFC_QA3_Receiver:
    The channel name does not depend on the environment it is present....verify the name once again!
    Regards,
    Abhishek.

  • Hello. I have a problem with OEL 6.5 and ocfs2. When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.

    Hello.
    I have a problem with OEL 6.5 and ocfs2.
    When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.
    fstab:
    UUID=32130a0b-2e15-4067-9e65-62b7b3e53c72 /some/4 ocfs2 _netdev,defaults 0 0
    #UUID=af522894-c51e-45d6-bce8-c0206322d7ab /some/9 ocfs2 _netdev,defaults 0 0
    UUID=1126b3d2-09aa-4be0-8826-0b2a590ab995 /some/3 ocfs2 _netdev,defaults 0 0
    #UUID=9ea9113d-edcf-47ca-9c64-c0d4e18149c1 /some/8 ocfs2 _netdev,defaults 0 0
    UUID=a368f830-0808-4832-b294-d2d1bf909813 /some/5 ocfs2 _netdev,defaults 0 0
    UUID=ee816860-5a95-493c-8559-9d528e557a6d /some/6 ocfs2 _netdev,defaults 0 0
    UUID=3f87634f-7dbf-46ba-a84c-e8606b40acfe /some/7 ocfs2 _netdev,defaults 0 0
    UUID=5def16d7-1f58-4691-9d46-f3fa72b74890 /some/1 ocfs2 _netdev,defaults 0 0
    UUID=0e682b5a-8d75-40d1-8983-fa39dd5a0e54 /some/2 ocfs2 _netdev,defaults 0 0

    What is the output of:
    # chkconfig --list o2cb
    # chkconfig --list ocfs2
    # cat /etc/ocfs2/cluster.conf

  • Hi, when I go to "select files to send" and click on "sent files" I get: "Internal Server Error (500) Your request could not be completed due to an internal server error".  I tried rebooting and that didn't work.  Any help would be appreciated.  Thanks.

    Hi, when I go to "select files to send" and click on "sent files" I get: "Internal Server Error (500) Your request could not be completed due to an internal server error".  This never happened b4.  I tried rebooting and that didn't work.  Any help would be appreciated.  Thanks.

    Hi ,
    Thank you for your question.
    This error was caused by the incorrect site binding, I will give a reference of my test Lab. We add two A records in DNS which the FQDN of CAS and Mailbox could resolve IP address.;
    Default Web Site:
    Exchange Back End:
    Then IIS must be restarted.
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim

  • AV Agent and OS Collector after server reboot

    We are using Oracle AV Server and AV Agent on version 10.2.0.3.2 with Bundle Patch #1.
    If the target server reboots, both AV agent and OS Aud collector does not come up automatically ?
    Is that a normal behavior ? or we have to do some modifications to get it automatically started.
    Appreciate your guidance.
    Thanks,
    Viral

    You could put it as a startup script, but there isn't anything already written. I call a cron script every hour to make sure that the collectors and agent is up. We had to setup trusted connections from the avagent -> avserver to start the collectors:
    This is on the agent server. We call it every hour from cron.
    #!/bin/ksh
    export ORACLE_HOME=<you set>
    export LD_LIBRARY_PATH_64=<you set>
    export LD_LIBRARY_PATH=<you set>
    export PATH=/bin:/usr/local/bin:/usr/bin:${ORACLE_HOME}/bin
    export collector_info="<yer collector name 1>:<yer source name 1>
    <yer collector name 2>:<yer source name 2>"
    start_av () {
    # See if av agent is running
    avctl show_oc4j_status | grep not
    export exit_status=${?}
    # If it is not running then start it
    if [ ${exit_status} -eq 0 ]; then
      echo "Starting AV agent"
      avctl start_oc4j
    else
      echo "AV agent is already running"
    fi
    start_collector () {
    export collector_name=$1
    export source_name=$2
    # The collector needs to be started from the home av box
    ssh <yer av server ip> /home/oracle/sh/start_collector.sh ${collector_name} ${source_name}
    export exit_status=$?
    if [ ${exit_status} -eq 0 ]; then
      echo "The collector ${collector_name} for ${source_name} was started"
    elif [ ${exit_status} -eq 99 ]; then
      echo "The collector ${collector_name} for ${source_name} was already running"
    else
      echo "The collector ${collector_name} for ${source_name} may have an issue"
    fi
    start_av
    for i in ${collector_info}; do
    collector_name=`echo $i | awk '{ FS=":" }{ print $1 }'`
    source_name=`echo $i | awk '{ FS=":" }{ print $2 }'`
    start_collector ${collector_name} ${source_name}
    doneThis is on your av server start_collector.sh
    export ORACLE_SID=<yer sid>
    export ORAENV_ASK=NO
    . /usr/local/bin/oraenv 1>/dev/null 2>/dev/null
    export collector_name=$1
    export source_name=$2
    export exit_collector_already_running=99
    start_collector () {
    #Check to see if the collector is already running
    avctl show_collector_status     \
          -collname $collector_name \
          -srcname $source_name     \
          | grep not
    export exit_status=$?
    # If the collector is not running then start it
    if [ $exit_status -eq 0 ]; then
      avctl start_collector           \
            -collname $collector_name \
            -srcname $source_name
    else
    # Exit with a status that the collector is already running
      exit $exit_collector_already_running
    fi
    start_collector

  • Startup and shutdown of  Apps and database on R12 with linux server reboot

    Hi Guys,
    Version : R12
    Platform : Linux EL 5
    Hi Guys,
    I am trying to startup and shutdown the R12 apps and database automatically with Linux server reboots.
    Does any one have steps to do this or metalink note:
    Thanks in advance,
    Z

    Hi,
    Please see this thread.
    Autostart of Services
    Re: Autostart of Services
    Regards,
    Hussein

  • Exportfs on nfs server causes server fence and reboots OVM3 server

    Hi,
    I am using OVM 3.1.1 manager and and same version ovm servers. I have a single server pool with four nodes. My server repository and pool file system are shared from two different NFS servers, and accessed using the back-end interface which is bonded on all Dom0s. When I do 'exportfs -ra' or 'service nfs reload' on the NFS server with the pool file system, two of my four servers immediately fence and reboot. It does it pretty consistently, I can recreate it every time. It just seem to reboot different servers from the pool. The NFS server with repository does not produce the same result after doing the same nfs refresh commands.
    The system log doesn't seem to catch any meaningful messages before the reboot. The o2cb parameters in /etc/sysconfig/o2cb are:
    O2CB_IDLE_TIMEOUT_MS=60000
    O2CB_HEARTBEAT_THRESHOLD=31
    O2CB_RECONNECT_DELAY_MS=2000
    O2CB_ENABLED=true
    O2CB_STACK=o2cb
    O2CB_KEEPALIVE_DELAY_MS=2000
    O2CB_BOOTCLUSTER=618edbaefe604e5a
    I appreciate any help to resolve this issue.
    Thanks.

    Is your cluster filesystem on NFS?
    I'd bump up your O2CB_HEARTBEAT_THRESHOLD to either 61 or 91. In OVM 3.2.1, the default has been upped to 61. We're running at 91. My guess is the exportfs is causing NFS to restart, which makes your cluster filesystem vanish for a bit, which causes the fencing and rebooting.
    OVM sure is fun...
    I'd also strongly suggest you log an SR.
    Rob

  • Capture and redeploy Server 2003 with 2 partitions?

    We have an old server than was installed many years ago and the people who set it up at the time partitioned the drive into C and D partitions with the C drive too small to allow for future growth.  Now there is a large software package that requires
    a service pack and there isn't enough room to complete the service pack installation.  Not sure why the large application was installed on the small C drive to begin with.  It is very complicated and slow (days long on the slow server) to reinstall
    the application, so they want to avoid an uninstall and reinstall of the software.
    So far, we have only used MDT 2012 to deploy Windows 7.
    Is it possible to use MDT to capture both partitions of this Server 2003 machine, keeping the drivers, then do a deployment task that partitions the drives with a larger C partition and redeploys the captured image back to both new partitions?
    Also since it is not being "cloned," but rather copied back to the same hardware, we do not want sysprep to be part of the process.  We want it to deploy back exactly the way it was and installed still joined to the domain with the same SID.
    If so, what additional steps and command syntax are required to capture and redeploy a multipartition image?
    Is there a better way to do this other than capturing and redeploying such as reliable software that can repartition a running Windows 2003 server?

    *THIS* is why I don't recommend creating large 2nd partitions on disk 0 (not talking about small recovery and/or Bitlocker boot patitions). Partition Fragmentation. :^)
    There may be some 3rd party tools out that could help (partition magic)? I wouldn't know, haven't really used them
    Best solution is to add a 2nd drive, migrate drive d: to the new disk, delete the 2nd partition, and expand the C: drive. All supported with in box tools.
    Do you have this problem on *multiple* machines, or just one?
    If just one, then boot to WinPE, archive the 2nd partition to external USB, delete the 2nd partition, extend the 1st c: partition to the new desired size, re-create the 2nd partition, and copy the files back.
    Keith Garner - Principal Consultant [owner] -
    http://DeploymentLive.com

  • Dual booting /w mac mini and shared partition

    I bought a mac mini a few months ago, I wanted to replace an old macbook which died.
    It had osx 10.4 on it, probably a beta or early bootcamp. I had a tri-boot system with
    a "shared partition", but when I've tried on my mini I get into problems.
    I'd like to have at least a windows 7, and osx partition and a larger, shared partition on same drive.
    On my last attempt I left the drive as single osx. Let boot camp partition it, booted to cd, installed..
    After installing, and updating, windows I partitioned the drive for the "shared partition" and rebooted.
    I could reboot into windows but osx would hang while booting. I had to download and re-install the system.
    BTW I am using a usb cd/dvd-rw drive to boot into my windows cd
    Can someone help me figure out what I did wrong or provide a howto, guide or link to get me through this?
    Thanks for visiting
    Geo

    What year/model Mac mini, new, used? What Mac OS are you using?
    Pre 10.7 you could add two OS's and an extra partition without too much problem (running rEFIt, BootLoader, etc) but 10.7 added a wrinkle to that.
    With Lion and any other OS (10.7 and Windows, etc.) you actually already have a "triple boot" system with the invisible "Repair Partition" added and Apple doesn't support any more.
    Here's an older post but basically the same answer except with Lion and W7 adding an exception to the rule.
    People have added more partitions but you would have to do a search here or do a Yahoo/Google to find the directions for doing it on one HD.
    (I've only used rEFIt and it worked fine for me, not doing it on one HD, I have a MacPro so it's easier to just use another HD)
    Other options,
    You can always install the Mac OS on an external HD or even have the external as your Data drive or depending on how large or how many files you want to transfer there's also the Thumb drives.
    And there's also Parallels/VMWare that you can use to transfer stuff until you need to boot into Windows natively.

  • Project Leader, OO Developer, and Forte Consultant Available

    Experienced Forte Architect/Developer has immediate availability for short or long term engagement.
    I am an IT professional with over 20 years of experience including 10 years in client/server development and support, and 7 years in OO/Forte development.
    I am actively seeking opportunities for immediate employment. I will consider all reasonable offers for contractual, or full-time employment. I am willing to relocate (at my own expense) for the right engagement.
    A sampling of my skill set includes:
    Forte 2, 3, and UDS development
    Rational Rose for UML and reverse engineering
    Rational Unified Process
    Oracle, DB2/6000 and DB2 application work
    Project Leader and Technical Project Leader for government and private sector projects.
    3-Tier application development
    Multi-platform (MVS, RS/6000, Windows) development
    Instrumental in planning, leadership, and development of major (6000 user) state-wide distributed application
    Please contact me for a complete resume, references and salary requirements.
    best regards,
    Mark Nichols
    Consultant
    Partition Software
    http://www.partitionsoftware.com/resume2003.htm
    e-mail: [email protected]
    voice: +1 (217) 414-5660

    Hi,
    Send your resume with complete project details to [email protected]
    Recently we recruited many Forte resources for our migration project.
    If you have J2EE skills along with Forte, we can consider your resume.
    Regards,
    HR

  • CIMC 2.0.x and FlexFlash partitions for SCU, HUU, Drivers not supported?

    Hello all,
    We are fairly new to UCS, but are hooked for sure.  We started purchasing B series blades, chassises, and FI's at first, and now are in the process of deploying C-Series Servers.  Very cool stuff, then does Cisco takes some of it away, maybe?    
    We just purchased a C240, and noticed the FlexFlash card.  After initial reading we see that you can have a Server Configuration Utility (SCU), Host Update Utility (HUU), and Drivers Partitions on the FlexFlash.  Along with a 4th HyperVisor (HV) partition, which started this journey for us as we are going to install ESXi onto the FlexFlash.  
    But by the time we got to reading about and managing FlexFlash, we had already upgraded the CIMC & Bios to 2.0(1)b.  We only see the one large ~16GB HV partition, and with SCU 4.0 there isn't much you can do about that.  After reading the release notes for CIMC 2.0, we read:
    Starting with this version, the SD storage device is available to Cisco IMC as a single hypervisor (HV) partition configuration. Prior versions had four virtual USB drives.
    So does this mean that after CIMC 2.0, SCU, HUU, and Driver Partitions are unsupported on FlexFlash?  Or is there a process to get these utilities back on FlexFlash?  Because the documentation does not really make it clear one way or the other.  It would seem to be a nice feature, but i would also understand why the reasons not to support it.  As I'm sure the HUU updates just as fast as firmware.  
    Thanks for your time and support,
    Nick

    This is very confusing. Just received our first c-class server (220m3) with sd card preinstalled, and reading the online docs about the scu and huu partitions. Great feature! Could not see the partitions in CIMC and believed the sd-card was empty and needed to be initialized.
    Followed the flexflash docs to get the card up and running:
    http://www.cisco.com/c/dam/en/us/solutions/collateral/data-center-virtualization/unified-computing/whitepaper_C11-718938.pdf
    Having spent one entire day getting the SD card to work as documented.
    Now, after reading this thread, I'm even more confused (and a little frustrated) - and would really like at least the scu to be bootable from the card.
    The experiences here are:
    1. Booting downloaded iso image SCU via kvm (virtual image)
    2. Configure network - dhcp does not work.. (tried earlier SCU, there dhcp does work.. but no update-icon...). Configures manually then.
    3. After network is configured, either manually or dhcp - the Update flexflash icon disappeares..
    Hitting the Update flexflash icon (after new reboot, without configuring network), a window appear with empty content. DOH.
    Booting all day trying different cisco manuals and approaches to get this to work, waiting for the long boot process each time.
    I would recommend that the cisco documents online are revised so we don't need to run through loops and endless cisco-pdf-redirections for nothing.
    Cheers,
    Martin

  • Help concerning grup and lvm partitions after installation

    Hello, I just recently installed arch-linux according to this installation guide:
    https://wiki.archlinux.de/title/UEFI_Installation
    Therefore I decided to use the following partitions:
    /dev/sda1 -> 1GB EFI boot
    /dev/sda2 -> swap
    /dev/sda3 -> split up to 2 partitions via lvm for /boot/ and /home as described in the guide.
    then I installed the UEFI grup without any errors and after reboot it did not work:
    I got the following errors:
    hwdb.bin does not exist, please run udevadm hwdb --update
    ERROR: device 'UUID=...' not found
    ERROR: Unable to find root device 'UUID=...'
    and an emergency shell appeared..
    Well first I thought of my fstab, but all partitions are mentioned there correctly.
    Then I looked the errors up in the internet and tried to reinstall mkinitcpio as well as a reuse of:  mkinitcpio -p linux
    Nothing happened, still the same.
    I only followed the steps mentioned in the installation guide and before reboot everything looked pretty good.
    Does grub maybe interfier with lvm ?
    In a nutshell, I have no single clue why it does not work, so hopefully one of you knows why
    Thanks already
    Last edited by archr00t (2014-11-15 20:55:02)

    Hello there,
    1. You have a UEFI system. As such, the UEFI partition (/dev/sda1) serves as your boot partition (e.g. mounted at /boot or /boot/efi). You don't need to create another one on top of that! That would be a big part of your problem.
    2. Your extra /boot partition is also LVM, which UEFI cannot handle. For UEFI systems, there must therefore be a seperate boot partition, and it CANNOT be LVM. Root, Home, and Swap are fine, but not the UEFI (i.e. /boot) partition.
    3. Even if it were a BIOS system, you also need to manually edit the grub configuration file to sucessfully boot where /boot is LVM.

  • Post server reboot , instance 1 crashes on starting the second one

    Hi ,
    We had a server reboot ( Solaris SPARC 64 bit) and had to shutdown the application running on RAC system on 2 servers.
    now post the activity , we are trying to bring up the instances but whenever one comes up the other goes down.
    If we try to start the second one , first goes down.
    Oracle database version : 10.2.0.3.0
    Alert logs for both have been mentioned below :
    instance1:
    Mon Jul 23 16:17:22 2012
    Starting ORACLE instance (normal)
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    Interface type 1 bge3 10.0.0.0 configured from OCR for use as a cluster interconnect
    Interface type 1 bge0 58.2.35.0 configured from OCR for use as  a public interface
    Interface type 1 bge1 58.2.35.0 configured from OCR for use as  a public interface
    Picked latch-free SCN scheme 3
    Using LOG_ARCHIVE_DEST_1 parameter default value as /u01/app/orainf/product/10.2.0/dbs/arch
    Autotune of undo retention is turned on.
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    ksdpec: called for event 13740 prior to event group initialization
    Starting up ORACLE RDBMS Version: 10.2.0.3.0.
    System parameters with non-default values:
      processes                = 400
      __shared_pool_size       = 956301312
      shared_pool_size         = 201326592
      __large_pool_size        = 16777216
      __java_pool_size         = 150994944
      java_pool_size           = 150994944
      __streams_pool_size      = 16777216
      streams_pool_size        = 16777216
      sga_target               = 1610612736
      control_files            = /db01/asdb/asdb/control01.ctl, /db01/asdb/asdb/control02.ctl, /db01/asdb/asdb/control03.ctl
      db_block_size            = 8192
      __db_cache_size          = 452984832
      db_cache_size            = 167772160
      compatible               = 10.2.0.3.0
      db_file_multiblock_read_count= 16
      cluster_database         = TRUE
      cluster_database_instances= 2
      thread                   = 1
      instance_number          = 1
      undo_management          = AUTO
      undo_tablespace          = UNDOTBS1
      ldap_directory_access    = PASSWORD
      remote_login_passwordfile= EXCLUSIVE
      db_domain                = intranet.genpact.com
      remote_listener          = LISTENERS_ASDB
      job_queue_processes      = 10
      background_dump_dest     = /u01/app/orainf/admin/asdb/bdump
      user_dump_dest           = /u01/app/orainf/admin/asdb/udump
      core_dump_dest           = /u01/app/orainf/admin/asdb/cdump
      audit_file_dest          = /u01/app/orainf/admin/asdb/adump
      db_name                  = asdb
      open_cursors             = 300
      pga_aggregate_target     = 848297984
      aq_tm_processes          = 1
    Mon Jul 23 16:17:24 2012
    Oracle instance running with ODM: Veritas 5.0.30.00 ODM Library, Version 1.1
    cluster interconnect IPC version:
            VERITAS IPC '5.0MP3' 07:30:15 Jul 29 2008
    IPC Vendor 86 proto 76
      Version 1.0
    PMON started with pid=2, OS id=17279
    DIAG started with pid=3, OS id=17281
    Mon Jul 23 16:17:24 2012
    Errors in file /u01/app/orainf/admin/asdb/bdump/asdb1_diag_17281.trc:
    ORA-07445: exception encountered: core dump [_kill()+8] [SIGIOT] [unknown code] [0x438100000000] [] []
    PSP0 started with pid=4, OS id=17283
    LMON started with pid=5, OS id=17285
    LMD0 started with pid=6, OS id=17287
    LMS0 started with pid=7, OS id=17289
    LMS1 started with pid=8, OS id=17293
    MMAN started with pid=9, OS id=17297
    DBW0 started with pid=10, OS id=17299
    LGWR started with pid=11, OS id=17301
    CKPT started with pid=12, OS id=17303
    SMON started with pid=13, OS id=17333
    RECO started with pid=14, OS id=17338
    CJQ0 started with pid=15, OS id=17340
    MMON started with pid=16, OS id=17342
    MMNL started with pid=17, OS id=17344
    Mon Jul 23 16:17:26 2012
    Errors in file /u01/app/orainf/admin/asdb/bdump/asdb1_lmon_17285.trc:
    ORA-27550: Target ID protocol check failed. tid vers=%d, type=%d, remote instance number=%d, local instance number=%d
    Mon Jul 23 16:17:26 2012
    LMON: terminating instance due to error 27550
    Instance terminated by LMON, pid = 17285
    Mon Jul 23 16:18:33 2012
    Starting ORACLE instance (normal)
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    Interface type 1 bge3 10.0.0.0 configured from OCR for use as a cluster interconnect
    Interface type 1 bge0 58.2.35.0 configured from OCR for use as  a public interface
    Interface type 1 bge1 58.2.35.0 configured from OCR for use as  a public interface
    Picked latch-free SCN scheme 3
    Using LOG_ARCHIVE_DEST_1 parameter default value as /u01/app/orainf/product/10.2.0/dbs/arch
    Autotune of undo retention is turned on.
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    ksdpec: called for event 13740 prior to event group initialization
    Starting up ORACLE RDBMS Version: 10.2.0.3.0.
    System parameters with non-default values:
      processes                = 400
      __shared_pool_size       = 956301312
      shared_pool_size         = 201326592
      __large_pool_size        = 16777216
      __java_pool_size         = 150994944
      java_pool_size           = 150994944
      __streams_pool_size      = 16777216
      streams_pool_size        = 16777216
      sga_target               = 1610612736
      control_files            = /db01/asdb/asdb/control01.ctl, /db01/asdb/asdb/control02.ctl, /db01/asdb/asdb/control03.ctl
      db_block_size            = 8192
      __db_cache_size          = 452984832
      db_cache_size            = 167772160
      compatible               = 10.2.0.3.0
      db_file_multiblock_read_count= 16
      cluster_database         = TRUE
      cluster_database_instances= 2
      thread                   = 1
      instance_number          = 1
      undo_management          = AUTO
      undo_tablespace          = UNDOTBS1
      remote_login_passwordfile= EXCLUSIVE
      db_domain                = intranet.genpact.com
      job_queue_processes      = 10
      background_dump_dest     = /u01/app/orainf/admin/asdb/bdump
      user_dump_dest           = /u01/app/orainf/admin/asdb/udump
      core_dump_dest           = /u01/app/orainf/admin/asdb/cdump
      audit_file_dest          = /u01/app/orainf/admin/asdb/adump
      db_name                  = asdb
      open_cursors             = 300
      pga_aggregate_target     = 848297984
      aq_tm_processes          = 1
    Mon Jul 23 16:18:35 2012
    Oracle instance running with ODM: Veritas 5.0.30.00 ODM Library, Version 1.1
    cluster interconnect IPC version:
            VERITAS IPC '5.0MP3' 07:30:15 Jul 29 2008
    IPC Vendor 86 proto 76
      Version 1.0
    PMON started with pid=2, OS id=19523
    DIAG started with pid=3, OS id=19525
    Mon Jul 23 16:18:36 2012
    Errors in file /u01/app/orainf/admin/asdb/bdump/asdb1_diag_19525.trc:
    ORA-07445: exception encountered: core dump [_kill()+8] [SIGIOT] [unknown code] [0x4C4500000000] [] []
    PSP0 started with pid=4, OS id=19527
    LMON started with pid=5, OS id=19529
    LMD0 started with pid=6, OS id=19531
    LMS0 started with pid=7, OS id=19533
    LMS1 started with pid=8, OS id=19537
    MMAN started with pid=9, OS id=19557
    DBW0 started with pid=10, OS id=19573
    LGWR started with pid=11, OS id=19576
    CKPT started with pid=12, OS id=19578
    SMON started with pid=13, OS id=19580
    RECO started with pid=14, OS id=19582
    CJQ0 started with pid=15, OS id=19584
    MMON started with pid=16, OS id=19586
    MMNL started with pid=17, OS id=19588
    Mon Jul 23 16:18:37 2012
    Errors in file /u01/app/orainf/admin/asdb/bdump/asdb1_lmon_19529.trc:
    ORA-27550: Target ID protocol check failed. tid vers=%d, type=%d, remote instance number=%d, local instance number=%d
    Mon Jul 23 16:18:37 2012
    LMON: terminating instance due to error 27550
    Instance terminated by LMON, pid = 19529
    Mon Jul 23 16:20:16 2012
    Starting ORACLE instance (normal)
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    Interface type 1 bge3 10.0.0.0 configured from OCR for use as a cluster interconnect
    Interface type 1 bge0 58.2.35.0 configured from OCR for use as  a public interface
    Interface type 1 bge1 58.2.35.0 configured from OCR for use as  a public interface
    Picked latch-free SCN scheme 3
    Using LOG_ARCHIVE_DEST_1 parameter default value as /u01/app/orainf/product/10.2.0/dbs/arch
    Autotune of undo retention is turned on.
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    ksdpec: called for event 13740 prior to event group initialization
    Starting up ORACLE RDBMS Version: 10.2.0.3.0.
    System parameters with non-default values:
      processes                = 400
      __shared_pool_size       = 956301312
      shared_pool_size         = 201326592
      __large_pool_size        = 16777216
      __java_pool_size         = 150994944
      java_pool_size           = 150994944
      __streams_pool_size      = 16777216
      streams_pool_size        = 16777216
      sga_target               = 1610612736
      control_files            = /db01/asdb/asdb/control01.ctl, /db01/asdb/asdb/control02.ctl, /db01/asdb/asdb/control03.ctl
      db_block_size            = 8192
      __db_cache_size          = 452984832
      db_cache_size            = 167772160
      compatible               = 10.2.0.3.0
      db_file_multiblock_read_count= 16
      cluster_database         = TRUE
      cluster_database_instances= 2
      thread                   = 1
      instance_number          = 1
      undo_management          = AUTO
      undo_tablespace          = UNDOTBS1
      db_domain                = intranet.genpact.com
      job_queue_processes      = 10
      background_dump_dest     = /u01/app/orainf/admin/asdb/bdump
      user_dump_dest           = /u01/app/orainf/admin/asdb/udump
      core_dump_dest           = /u01/app/orainf/admin/asdb/cdump
      audit_file_dest          = /u01/app/orainf/admin/asdb/adump
      db_name                  = asdb
      open_cursors             = 300
      pga_aggregate_target     = 848297984
    Mon Jul 23 16:20:18 2012
    Oracle instance running with ODM: Veritas 5.0.30.00 ODM Library, Version 1.1
    cluster interconnect IPC version:
            VERITAS IPC '5.0MP3' 07:30:15 Jul 29 2008
    IPC Vendor 86 proto 76
      Version 1.0
    PMON started with pid=2, OS id=22860
    DIAG started with pid=3, OS id=22870
    Mon Jul 23 16:20:18 2012
    Errors in file /u01/app/orainf/admin/asdb/bdump/asdb1_diag_22870.trc:
    ORA-07445: exception encountered: core dump [_kill()+8] [SIGIOT] [unknown code] [0x595600000000] [] []
    PSP0 started with pid=4, OS id=22888
    LMON started with pid=5, OS id=22892
    LMD0 started with pid=6, OS id=22899
    LMS0 started with pid=7, OS id=22901
    LMS1 started with pid=8, OS id=22905
    MMAN started with pid=9, OS id=22909
    DBW0 started with pid=10, OS id=22911
    LGWR started with pid=11, OS id=22913
    CKPT started with pid=12, OS id=22915
    SMON started with pid=13, OS id=22917
    RECO started with pid=14, OS id=22919
    CJQ0 started with pid=15, OS id=22921
    MMON started with pid=16, OS id=22923
    MMNL started with pid=17, OS id=22933
    Mon Jul 23 16:20:20 2012
    Errors in file /u01/app/orainf/admin/asdb/bdump/asdb1_lmon_22892.trc:
    ORA-27550: Target ID protocol check failed. tid vers=%d, type=%d, remote instance number=%d, local instance number=%d
    Mon Jul 23 16:20:20 2012
    LMON: terminating instance due to error 27550
    Instance terminated by LMON, pid = 22892instance 2:
    Mon Jul 23 16:20:30 2012
    Starting ORACLE instance (normal)
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    Interface type 1 bge3 10.0.0.0 configured from OCR for use as a cluster interconnect
    WARNING 10.0.0.0 could not be translated to a network address error 1
    Interface type 1 bge0 58.2.35.0 configured from OCR for use as  a public interface
    Interface type 1 bge1 58.2.35.0 configured from OCR for use as  a public interface
      WARNING: No cluster interconnect has been specified. Depending on
               the communication driver configured Oracle cluster traffic
               may be directed to the public interface of this machine.
               Oracle recommends that RAC clustered databases be configured
               with a private interconnect for enhanced security and
               performance.
    Picked latch-free SCN scheme 3
    Using LOG_ARCHIVE_DEST_1 parameter default value as /u01/app/orainf/product/10.2.0/dbs/arch
    Autotune of undo retention is turned on.
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    ksdpec: called for event 13740 prior to event group initialization
    Starting up ORACLE RDBMS Version: 10.2.0.3.0.
    System parameters with non-default values:
      processes                = 400
      __shared_pool_size       = 721420288
      shared_pool_size         = 201326592
      __large_pool_size        = 16777216
      __java_pool_size         = 150994944
      java_pool_size           = 150994944
      __streams_pool_size      = 16777216
      streams_pool_size        = 16777216
      spfile                   = /db01/asdb/asdb/spfileasdb.ora
      sga_target               = 1610612736
      control_files            = /db01/asdb/asdb/control01.ctl, /db01/asdb/asdb/control02.ctl, /db01/asdb/asdb/control03.ctl
      db_block_size            = 8192
      __db_cache_size          = 687865856
      db_cache_size            = 167772160
      compatible               = 10.2.0.3.0
      db_file_multiblock_read_count= 16
      cluster_database         = TRUE
      cluster_database_instances= 2
      thread                   = 2
      instance_number          = 2
      undo_management          = AUTO
      undo_tablespace          = UNDOTBS2
      ldap_directory_access    = PASSWORD
      remote_login_passwordfile= EXCLUSIVE
      db_domain                = intranet.genpact.com
      dispatchers              = (PROTOCOL=TCP) (SERVICE=asdbXDB)
      remote_listener          = LISTENERS_ASDB
      job_queue_processes      = 10
      background_dump_dest     = /u01/app/orainf/admin/asdb/bdump
      user_dump_dest           = /u01/app/orainf/admin/asdb/udump
      core_dump_dest           = /u01/app/orainf/admin/asdb/cdump
      audit_file_dest          = /u01/app/orainf/admin/asdb/adump
      db_name                  = asdb
      open_cursors             = 300
      pga_aggregate_target     = 848297984
      aq_tm_processes          = 1
    Cluster communication is configured to use the following interface(s) for this instance
      58.2.35.93
    Mon Jul 23 16:20:32 2012
    Oracle instance running with ODM: Veritas 5.0.30.00 ODM Library, Version 1.1
    cluster interconnect IPC version:Oracle UDP/IP (generic)
    IPC Vendor 1 proto 2
    PMON started with pid=2, OS id=28537
    DIAG started with pid=3, OS id=28539
    PSP0 started with pid=4, OS id=28541
    LMON started with pid=5, OS id=28543
    Mon Jul 23 16:20:33 2012
    WARNING: Failed to set buffer limit on IPC interconnect socket
    Oracle requires that the SocketReceive buffer size be tunable upto 1MB
    Please make sure the kernel parameterwhich limits SO_RCVBUF value set by
    applications is atleast 1MB
    LMD0 started with pid=6, OS id=28545
    LMS0 started with pid=7, OS id=28547
    LMS1 started with pid=8, OS id=28551
    MMAN started with pid=9, OS id=28555
    DBW0 started with pid=10, OS id=28557
    LGWR started with pid=11, OS id=28567
    CKPT started with pid=12, OS id=28587
    SMON started with pid=13, OS id=28594
    RECO started with pid=14, OS id=28596
    CJQ0 started with pid=15, OS id=28599
    MMON started with pid=16, OS id=28605
    MMNL started with pid=17, OS id=28608
    Mon Jul 23 16:20:34 2012
    starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
    starting up 1 shared server(s) ...
    Mon Jul 23 16:20:34 2012
    lmon registered with NM - instance id 2 (internal mem no 1)
    Mon Jul 23 16:20:35 2012
    Reconfiguration started (old inc 0, new inc 2)
    List of nodes:
    1
    Global Resource Directory frozen
    * allocate domain 0, invalid = TRUE
    Communication channels reestablished
    Master broadcasted resource hash value bitmaps
    Non-local Process blocks cleaned out
    Mon Jul 23 16:20:35 2012
    LMS 0: 0 GCS shadows cancelled, 0 closed
    Mon Jul 23 16:20:35 2012
    LMS 1: 0 GCS shadows cancelled, 0 closed
    Set master node info
    Submitted all remote-enqueue requests
    Dwn-cvts replayed, VALBLKs dubious
    All grantable enqueues granted
    Post SMON to start 1st pass IR
    Mon Jul 23 16:20:35 2012
    LMS 1: 0 GCS shadows traversed, 0 replayed
    Mon Jul 23 16:20:35 2012
    LMS 0: 0 GCS shadows traversed, 0 replayed
    Mon Jul 23 16:20:35 2012
    Submitted all GCS remote-cache requests
    Fix write in gcs resources
    Reconfiguration complete
    LCK0 started with pid=20, OS id=28770
    Mon Jul 23 16:20:36 2012
    ALTER DATABASE   MOUNT
    Mon Jul 23 16:20:36 2012
    This instance was first to mount
    Setting recovery target incarnation to 2
    Mon Jul 23 16:20:40 2012
    Successful mount of redo thread 2, with mount id 2392310356
    Mon Jul 23 16:20:40 2012
    Database mounted in Shared Mode (CLUSTER_DATABASE=TRUE)
    Completed: ALTER DATABASE   MOUNT
    Mon Jul 23 16:20:40 2012
    ALTER DATABASE OPEN
    This instance was first to open
    Mon Jul 23 16:20:40 2012
    Beginning crash recovery of 1 threads
    parallel recovery started with 2 processes
    Mon Jul 23 16:20:41 2012
    Started redo scan
    Mon Jul 23 16:20:41 2012
    Completed redo scan
    509 redo blocks read, 149 data blocks need recovery
    Mon Jul 23 16:20:41 2012
    Started redo application at
    Thread 2: logseq 1492, block 3
    Mon Jul 23 16:20:41 2012
    Recovery of Online Redo Log: Thread 2 Group 7 Seq 1492 Reading mem 0
      Mem# 0: /db01/asdb/asdb/redo07a.log
      Mem# 1: /db01/asdb/asdb/redo07b.log
    Mon Jul 23 16:20:41 2012
    Completed redo application
    Mon Jul 23 16:20:41 2012
    Completed crash recovery at
    Thread 2: logseq 1492, block 512, scn 10435264045528
    149 data blocks read, 149 data blocks written, 509 redo blocks read
    Picked broadcast on commit scheme to generate SCNs
    Mon Jul 23 16:20:42 2012
    Thread 2 advanced to log sequence 1493
    Thread 2 opened at log sequence 1493
      Current log# 8 seq# 1493 mem# 0: /db01/asdb/asdb/redo08a.log
      Current log# 8 seq# 1493 mem# 1: /db01/asdb/asdb/redo08b.log
    Successful open of redo thread 2
    Mon Jul 23 16:20:42 2012
    MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
    Mon Jul 23 16:20:42 2012
    SMON: enabling cache recovery
    Mon Jul 23 16:20:42 2012
    Successfully onlined Undo Tablespace 5.
    Mon Jul 23 16:20:42 2012
    SMON: enabling tx recovery
    Mon Jul 23 16:20:43 2012
    Database Characterset is AL32UTF8
    replication_dependency_tracking turned off (no async multimaster replication found)
    Starting background process QMNC
    QMNC started with pid=24, OS id=29088
    Mon Jul 23 16:20:46 2012
    Completed: ALTER DATABASE OPENPlease suggest
    Regards
    KK

    Hi ,
    I have used the command ifconfig -a
    below is the output :
    chaning the original IP's with alphabets for security concerns
    instance 1:
    bash-2.05$ ifconfig -a
    lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
            inet 127.0.0.1 netmask ff000000
    bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
            inet XY.M.CD.93 netmask ffffff00 broadcast XY.M.CD.255
            groupname orapub
    bge0:1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 2
            inet XY.M.CD.94 netmask ffffff00 broadcast XY.M.CD.255
    bge0:3: flags=1040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4> mtu 1500 index 2
            inet XY.M.CD.151 netmask ffffff00 broadcast XY.M.CD.255
    bge1: flags=39040803<UP,BROADCAST,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,FAILED,STANDBY> mtu 1500 index 3
            inet XY.M.CD.95 netmask ffffff00 broadcast XY.M.CD.255
            groupname orapub
    bge2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 4
            inet ZZ.0.0.1 netmask ff000000 broadcast ZZ.255.255.255
    bge3: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 5
            inet 0.0.0.0 netmask 0instance 2:
    bash-2.05$ ifconfig -a
    lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
            inet 127.0.0.1 netmask ff000000
    bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
            inet XY.M.CD.96 netmask ffffff00 broadcast XY.M.CD.255
            groupname orapub
    bge0:1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 2
            inet XY.M.CD.97 netmask ffffff00 broadcast XY.M.CD.255
    bge0:2: flags=1040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4> mtu 1500 index 2
            inet XY.M.CD.152 netmask ffffff00 broadcast XY.M.CD.255
    bge1: flags=69040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,STANDBY,INACTIVE> mtu 1500 index 3
            inet XY.M.CD.98 netmask ffffff00 broadcast XY.M.CD.255
            groupname orapub
    bge3: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 5
            inet 0.0.0.0 netmask ff000000
    bge3:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 5
            inet 10.0.0.3 netmask ff000000 broadcast ZZ.255.255.255Regards

Maybe you are looking for

  • How to show colmn value in the legend in ssrs Chart?

    How to display Legend values in my ssrs Report like below  I want the values like below. SuccesCount-2000 FailCount-100 No status-150 Can U pls help me for this ThanX!

  • Question about retina display on the New Ipad.

    I know when it comes to big screen tv's. The rule of thumb is that only if it's 50 inches or more that you get the benefits of 1080p. It would stand to reason that you wouldn't be able to tell the difference on a 9.7 inch screen. Any thoughts? As the

  • Movie Preview and movie track don't match

    Hi there.. i've imported a movie slideshow (created in fotomagico) into garageband, with the intent of adding chapter markers. However, the movie timeline on the top of the page, doesn't match the view preview window. Ie. the view preview is showing

  • Windows Updates Error Codes 80070308 and 80070643

    Recently I have a problem with windows updates patches for this month (June 2014).  I updated 10 computers (at office), 9 of them have either the error codes 80070308 and/or 80070643.  I tried to disable the Symantec Endpoint, used the Microsoft .NET

  • Hiding Shared Folders in Mac OS X 10.5

    Dumb question: If I uncheck the Shared Folders option in System Preferences, will my computer even appear in Finder under Network on other peoples' Macs who are on the same network as me? Or will my computer simply show up, but those users won't be a