Re: Password Assistant -- "The Missing Manual" references such a beast, but I cannot locate it. I have ver 10.6.8. Anyone out there who can help?

According to The Missing Manual, Version 10.6.8 of the Mac OSX Snow Leopard system should have a password generating utility, called the "Password Assistant," which actually generates passwords for you. I've been unable to find this miraculous utility on my Mac, and seek enlightenment from the learned readers of this community. Anyone out there have some light to shine on my dark corner?

I think the "Password Assistant" they are specifically referring to comes up when creating or changing an Account's password. For example, go into your System Preferences Accounts. Select an Account. Click the Change Password... The sheet that drops down has a little key in a box. Click that. And a window with the title "Password Assistant" is displayed.
Example: Using Apple’s Password Assistant
Note, the Password Assistant can also be brought up from Keychain Access's New Password Item... menu. It brings up a sheet with a little key too.
Lastly, a little google searching flushed out a little app which apparently directly uses the built in OS X Password Assistant used by Change Password and Keychain Access. It's called, no surprise, Password Assistant and can be found here.

Similar Messages

I am trying to install Adobe Premiere Elements 9 without success. I successfully installed Photoshop Elements 9 without a problem. The message I am getting is 'Invalid Unicode file - .\Autoplay\LangData\en_US\lang.dat'. Anyone out there who can help pleas

I am trying to install Adobe Premiere Elements 9 without success. I successfully installed Photoshop Elements 9 without a problem. The message I am getting is 'Invalid Unicode file - .\Autoplay\LangData\en_US\lang.dat'. Anyone out there who can help please?

click setup, not autoplay.

I just got a new ipone5c and i can't get the light to go out unless I turn it off. Have tried all the things I read anyone out there that can help me??

I just got a new iphone 5c this is my first smart phone. I have an Ipad so thought it would be easy.
I downloaded the new software don't know if this changed anything. I have only had phone for 4 days
but now the light won't shut off. I have to turn off the phone for it to go out. I did the holding down home
button and start button till apple shows up. I checked to make sure the LED flash for alerts button was off.
I don't know what else to do. Anyone out there have the same problem and have found an answer.
Thank you!

After powering the iPhone off and on, the light goes out but turns back on randomly or immediately after powering the iPhone on?
Since nothing else you have tried has resolved it, try restoring the iPhone with iTunes from the iPhone's backup first.
If no change after that, try restoring as a new iPhone or not from the backup.
If no change after that, the iPhone has a hardware problem.
Call AppleCare or make an appointment at an Apple Store if there is one nearby.

TS1468 I am having trouble with two cover flows duplicating themselves more than once, is there anyone out there that can help me with this, they are not duplicated in my itunes library, just the ipod.

I am having trouble with two cover flows on my IPOD, duplicating themselves more than once, they haven't duplicated themselves in my Itunes library, just the ipod, could anyone have any ideas on how I could fix this problem. I have tried so many times, even if I restore the ipod, it still does the same thing. Please if possible email me at [email protected] with any suggestions.

Aha! I have sorted it.
For those with similar problems, the solution is this:
Macintosh HD > Library > Audio > MIDI Drivers
Then delete DigiDioMidiDriver.plugin

Hi there! yesterday I installed Mavericks on my Macbook. Since then, it doesn't mount my external hard disk drive anymore, which he did a week ago (without the update). Is there anyone out there who knows a solution?

Hi there! Yesterday, I installed Mavericks on my Macbook. Since then, it doesn't recognize my external hard disk drive anymore (at least not on the desktop. In Germany they call it "it doens't mount it". I don't know if it's the same expression in english?)
I just used it a week ago, before I did the update and it worked perfectly fine.
Is there anyone out there who knows a solution for this problem? I've been googleing for hours now and can't find any answer.
Thank you!!!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Anyone out there that can maybe help. I was using my 5s to record my meeting minutes for the first time and clicked cancel cos I wanted to continue recording and instead deleted it all! :( anyway to get it back?

Anyone out there that can maybe help. I was using my 5s to record my meeting minutes for the first time and clicked cancel cos I wanted to continue recording and instead deleted it all! :( anyway to get it back?

The other Allan is being facetious--you somehow found the forum for pre-2006 eMac desktop computers that gets little traffic.
Getting you moved to the iPhone forums.

Is there anyone out there who pre-ordered on the 3rd and still has not received their iPhone???

I pre-ordered on the third and received an email on the fourth saying my phone had shipped. I checked FedEx with the tracking # Verizon provided and I still get the same status that I got on the 4th. It says the order has been "initiated". The next step would be "picked up", but here it is nine days after I pre-ordered and no phone!!! Hasn't even shipped!!!
Is there anyone who is experiencing the same problems???

I have been going back forth with Verizon and UPS and Verizon is blaming UPS and told me it's out of their hands once it ships. UPS is saying they're doing their best to get the package back to NJ where I am. I also tried cancelling my order with Verizon and was told it could not be cancelled because the package has shipped. I was told if I wanted another phone I'd have to pay for it again. No one knows where my phone is UPS says they have misrouted a trailer full of Iphones. I don't know how true that is.

Tutorial Dreamweaver Cs5.5 The Missing Manual (Pg 998 - 1018) about adding dynamic data to your page

Hallo,
I did Tutorial: Displaying Database Info in the Missing Manual for Dreamweaver CS5.5.
My problem is with "Editing a Recordset and Linking to a Detail Page" (which starts at pg 1002:
I did this exercise ,over 5 times nowe, but every time with "Building the Detailed Product Page" at pg 1007, I get a bad result.
I only get one page (the default one with productID = 1) for every link on the indexpage.
In the adressbar (Live View) I see the right adress: for example: http://localhost/cos...hp?productID=16, but for all productID's only the detailspage for productID are shown.
There is also a message: Notice: Use of undefined constant ‘productID’ - assumed '‘productID’' in E:\xampp\htdocs\cosmo_shop\product.php on line 34
But I don't understand what could be wrong in this line.
Here is the code lines 33 -48: is is about the second line:
$varProduct_rsDetails = "32";
if (isset($_GET[‘productID’])) {
$varProduct_rsDetails = $_GET[‘productID’];
mysql_select_db($database_connCosmo, $connCosmo);
$query_rsDetails = sprintf("SELECT products.productID, products.productName, products.price, products.`description`, products.inventory, products.image, vendors.vendorName FROM products, vendors WHERE products.vendorID = vendors.vendorID AND products.productID = %s ", GetSQLValueString($varProduct_rsDetails, "int"));
$rsDetails = mysql_query($query_rsDetails, $connCosmo) or die(mysql_error());
$row_rsDetails = mysql_fetch_assoc($rsDetails);
$totalRows_rsDetails = mysql_num_rows($rsDetails);
mysql_select_db($database_connCosmo, $connCosmo);
$query_rsCategories = "SELECT * FROM categories ORDER BY categoryName ASC";
$rsCategories = mysql_query($query_rsCategories, $connCosmo) or die(mysql_error());
$row_rsCategories = mysql_fetch_assoc($rsCategories);
$totalRows_rsCategories = mysql_num_rows($rsCategories);
?>
Can someone tell me what is going on here?
Kind regards, Ans Hekerman

I can manually type in double brackets, like this:
$varProduct_rsDetails = "1";
if (isset($_GET["productID"])) {
$varProduct_rsDetails = $_GET["productID"];
this is accepted; no syntax-error report.
I can manually type in single brackets, like this:
$varProduct_rsDetails = "1";
if (isset($_GET['productID'])) {
$varProduct_rsDetails = $_GET['productID'];
this is also accepted; no syntax-error report.
Dreamweaver itself made this code:
$varProduct_rsDetails = "32";
if (isset($_GET[‘productID’])) {
$varProduct_rsDetails = $_GET[‘productID’];
this was not OK; there was a syntax-error report.
But strange enough, when I do paste this now from here, it is accepted.
So the problem has been, that DW created code that gave a syntax error.
I could repair it by replacing the single qoutes of DW, by typing single quotes in DW manually, or by typing in in DW manually double qoutes!!!
So maybe everybode was right!!!
But is was a very bad problem; maybe a "bug" of the program?
I repeated this about 10 times before I got the solution frome this Forum.

Photoshop Elements 4: The Missing Manual

We having been using Photoshop Elements 2. For Christmas my daughter and I got my wife a Wacom Tablet. On one of the disks that came with the tablet was Elements 4. Very nice. So I figured I would get Barbara Brundage's Missing Manual book, but the book is now out of print and because Elements 5 is out, the publisher will not be reprinting. So congratulations to Barbara for writing a very popular book. (By the way, the missing manual for elements 3 is still available). So my question is, does anyone know where I can get a copy of said book. At this point used is fine.

My local bookstore tried to order it and they couldn't because all of their suppliers listed it as out of print, and they have ordered many books for me successfully in the past. Three stores on the web who were out of it informed me via email that they wouldn't be getting any more copies. See this reply as an example:
> Unfortunately, the book in question is out of stock at the
> publisher's warehouse and has been for several months. It'll not
> be reprinted as the Elements 5 book is out / released. In other
> words, the Elements 4 Missing Manual book is, essentially,
> "Out of Print" or very near it.
> We will not be getting more copies in stock. I apologize.
I am unwilling to put in an order to Amazon unless I can get a firm date of shipping, also, and I quote "if you still prefer to use a credit card, we recommend that you enter your full account number". I do not give my bank account number out if I can help it.
When I tried to order the book from one of their affiliates who listed the book as in stock, I got this message: "*** We're sorry. The quantity you requested is no longer available. The number to the right is the maximum quantity currently available. ***" That number was zero.
I think you might get in touch with your publisher and find out just what is the status on this book. I could find out nothing on the publishes web site. I could find no way of determining if the book was available before I put in an order there, and I don't like ordering blind either by phone or over the web.
The fact is, as far as I can tell, and I have spent 4 hours on this, is no one has your book in stock, except maybe the publisher, but they're not telling. Amazon lists the book, but they don't have it in stock. They are promising to ship it in 4 to 6 weeks. That means, according to them, they will have it if the publisher sends it to them. Normally that means they will ship it, but not in all cases. Listen, I run a store and many times we only find out from a publisher that the book is out of print when we make an order for the book and they don't include it in the received order but list it as out of print on the invoice. That is how publishers work.
Sorry, I really wanted to buy your book.

PSE8 for Mac - The Missing Manual?

Barbara B. & others,
When is the release date for The Missing Manual for PSE8 for Mac? Will the format be similar to that for PSE6 for Mac?
Thank you.

Well, it would be better to pm me on this,since I'm not really supposed to talk about that here, but it's been printed and is on the way to the various distributors. Yes, format is pretty much the same as the PSE 6 book.
Anyone else with questions, please contact me directly. Thanks.

Book: iPhone - The Missing Manual

It's not out in the book stores yet... But after reading the review on +ipod observer+, I found that you can pre-order it from O'Reilly/Pogue Press for $25 and get the full PDF download immediately [$5 for the PDF and $20 for the book]. Amazon is pre-selling the book for $13 and change, but hey, you don't get to get a head start on it by reading the PDF.
Pretty good book, as all O'Reilly books are. Learning some things I didn't know about, and getting answers to things I've wondered about. I recommend it to anyone looking to learn their way around the iPhone faster [I've had mine a couple days...]
On a side note, I'm scheduled for the Going Further iPhone Workshop at the Apple Store on Saturday. So that will get me moving along, I'm sure. Actually, I'm doing really well with it. I just want to be able to use it to it's full potential

Oh, is this supposed to be where I'm supposed to tell you something you don't know? Right. I just recommended a book I'm reading. That's all.
temper temper, Mr. Dre, Mr. NWA, Mr. AK Comin' straight out of Compton,
It was more rhetorical than anything else.
All due respect:
"Changing a Lightbulb: the Missing Manual"
"Watching TV: the Missing Manual"
"Brushing my hair: the Missing Manual."
"Sitting: the Missing Manual."
"Wondering Where My Cat Is: The Missing Manual"

I'm always losing all of my music and get a lot of apps that i don't need when i plug my i4 into my mac. I only ticked the box 'Manually manage music and videos' but it's always syncing itself. How can i prevent this? I don't want to put bacPlease Help!!!

I'm always losing all of my music and get a lot of apps that i don't need when i plug my i4 into my mac. I only ticked the box 'Manually manage music and videos' but it's always syncing itself. How can i prevent this? I don't want to put back 1500 any more because of this. Please Help!!!

I'm always losing all of my music and get a lot of apps that i don't need when i plug my i4 into my mac. I only ticked the box 'Manually manage music and videos' but it's always syncing itself. How can i prevent this? I don't want to put back 1500 any more because of this. Please Help!!!

I have an iMac and I want to use it as WLAN Hotspot. But I miss Airport in the overview to choose from. What is wrong? And who can help me?

I have an iMac and I want to use it as WLAN Hotspot. But I miss Airport in the overview to choose from. What is wrong? And who can help me?

Hello Mark,
Have you done these 2 things?
Under he Airport icon choose Create Network...
And in System Preferences>Sharing, have you setup & enabled Internet Sharing?

My login option turned to disabled ,according to the tips ,i've changed my passwords many times, but i still can't login my itunes store ,who can help me to solve the problem?

My login option turned to disabled ，according to the tips ,i've changed my passwords many times, but i still can't login my itunes store ,who can help me to solve the problem?

Try here > Can't connect to the iTunes Store
Try disabling anti virus software and turning off the Firewall.

"unexpected reference element " error,who can help me?:(

hi all:
I am using Jpub tools,I created a webservices client and its PL/SQL wrapper,all are success,but when i test the function in sqlplus,I get a error:
oracle.j2ee.ws.common.encoding.DeserializationException:unexpected reference element during Deserialization;the element "result" is not defined as a referenceable type
I traced the response message as follow:
<?xml version="1.0" encoding="utf-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<ns1:setUserPasswordResponse soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns1="http://lcimsforuserinfo.webservice.lcbms.linkage.com">
<setUserPasswordReturn href="#id0"/>
</ns1:setUserPasswordResponse>
<multiRef id="id0" soapenc:root="0" soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xsi:type="ns2:SetUserPasswordResponse" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns2="http://lcimsforuserinfo.webservice.lcbms.linkage.com">
<errorDescription xsi:type="soapenc:string">password modify success!</errorDescription>
<result href="#id1"/>
</multiRef>
<multiRef id="id1" soapenc:root="0" soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xsi:type="xsd:int" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">0</multiRef>
</soapenv:Body>
</soapenv:Envelope>
i found the service was successfull executed,so I supect this client can not support the format:"multiRef"....but i don't know how to do........
who can help me!!
My WSDL as follows:
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions targetNamespace="http://lcimsforuserinfo.webservice.lcbms.linkage.com" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://lcimsforuserinfo.webservice.lcbms.linkage.com" xmlns:intf="http://lcimsforuserinfo.webservice.lcbms.linkage.com" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">

<wsdl:types>
<Schema targetNamespace="http://lcimsforuserinfo.webservice.lcbms.linkage.com" xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://schemas.xmlsoap.org/soap/encoding/"/>
<complexType name="GetUserInfoRequest">
<sequence>
<element name="servicetype" type="xsd:int"/>
<element name="username" nillable="true" type="soapenc:string"/>
</sequence>
</complexType>
<complexType name="GetUserInfoResponse">
<sequence>
<element name="errorDescription" nillable="true" type="soapenc:string"/>
<element name="result" type="xsd:int"/>
<element name="userInfoXML" nillable="true" type="soapenc:string"/>
</sequence>
</complexType>
<complexType name="GetUserDetRequest">
<sequence>
<element name="beginTime" nillable="true" type="soapenc:string"/>
<element name="endTime" nillable="true" type="soapenc:string"/>
<element name="servicetype" type="xsd:int"/>
<element name="username" nillable="true" type="soapenc:string"/>
</sequence>
</complexType>
<complexType name="GetUserDetResponse">
<sequence>
<element name="errorDescription" nillable="true" type="soapenc:string"/>
<element name="result" type="xsd:int"/>
<element name="userDetXML" nillable="true" type="soapenc:string"/>
</sequence>
</complexType>
<complexType name="GetAuthFailRequest">
<sequence>
<element name="authDate" nillable="true" type="soapenc:string"/>
<element name="servicetype" type="xsd:int"/>
<element name="username" nillable="true" type="soapenc:string"/>
</sequence>
</complexType>
<complexType name="GetAuthFailResponse">
<sequence>
<element name="authFailXML" nillable="true" type="soapenc:string"/>
<element name="errorDescription" nillable="true" type="soapenc:string"/>
<element name="result" type="xsd:int"/>
</sequence>
</complexType>
<complexType name="GetUserOnlineRequest">
<sequence>
<element name="servicetype" type="xsd:int"/>
<element name="username" nillable="true" type="soapenc:string"/>
</sequence>
</complexType>
<complexType name="GetUserOnlineResponse">
<sequence>
<element name="errorDescription" nillable="true" type="soapenc:string"/>
<element name="result" type="xsd:int"/>
<element name="userOnlineXML" nillable="true" type="soapenc:string"/>
</sequence>
</complexType>
<complexType name="SetUserPasswordRequest">
<sequence>
<element name="admin" nillable="true" type="soapenc:string"/>
<element name="password" nillable="true" type="soapenc:string"/>
<element name="servicetype" type="xsd:int"/>
<element name="username" nillable="true" type="soapenc:string"/>
</sequence>
</complexType>
<complexType name="SetUserPasswordResponse">
<sequence>
<element name="errorDescription" nillable="true" type="soapenc:string"/>
<element name="result" type="xsd:int"/>
</sequence>
</complexType>
</schema>
</wsdl:types>
<wsdl:message name="setUserPasswordResponse">
<wsdl:part name="setUserPasswordReturn" type="impl:SetUserPasswordResponse"/>
</wsdl:message>
<wsdl:message name="getUserInfoRequest">
<wsdl:part name="in0" type="impl:GetUserInfoRequest"/>
</wsdl:message>
<wsdl:message name="getUserOnlineRequest">
<wsdl:part name="in0" type="impl:GetUserOnlineRequest"/>
</wsdl:message>
<wsdl:message name="getAuthFailResponse">
<wsdl:part name="getAuthFailReturn" type="impl:GetAuthFailResponse"/>
</wsdl:message>
<wsdl:message name="getUserInfoResponse">
<wsdl:part name="getUserInfoReturn" type="impl:GetUserInfoResponse"/>
</wsdl:message>
<wsdl:message name="getUserDetResponse">
<wsdl:part name="getUserDetReturn" type="impl:GetUserDetResponse"/>
</wsdl:message>
<wsdl:message name="getUserOnlineResponse">
<wsdl:part name="getUserOnlineReturn" type="impl:GetUserOnlineResponse"/>
</wsdl:message>
<wsdl:message name="getUserDetRequest">
<wsdl:part name="in0" type="impl:GetUserDetRequest"/>
</wsdl:message>
<wsdl:message name="setUserPasswordRequest">
<wsdl:part name="in0" type="impl:SetUserPasswordRequest"/>
</wsdl:message>
<wsdl:message name="getAuthFailRequest">
<wsdl:part name="in0" type="impl:GetAuthFailRequest"/>
</wsdl:message>
<wsdl:portType name="LcimsForUserInfo">
<wsdl:operation name="getUserInfo" parameterOrder="in0">
<wsdl:input message="impl:getUserInfoRequest" name="getUserInfoRequest"/>
<wsdl:output message="impl:getUserInfoResponse" name="getUserInfoResponse"/>
</wsdl:operation>
<wsdl:operation name="getUserDet" parameterOrder="in0">
<wsdl:input message="impl:getUserDetRequest" name="getUserDetRequest"/>
<wsdl:output message="impl:getUserDetResponse" name="getUserDetResponse"/>
</wsdl:operation>
<wsdl:operation name="getAuthFail" parameterOrder="in0">
<wsdl:input message="impl:getAuthFailRequest" name="getAuthFailRequest"/>
<wsdl:output message="impl:getAuthFailResponse" name="getAuthFailResponse"/>
</wsdl:operation>
<wsdl:operation name="getUserOnline" parameterOrder="in0">
<wsdl:input message="impl:getUserOnlineRequest" name="getUserOnlineRequest"/>
<wsdl:output message="impl:getUserOnlineResponse" name="getUserOnlineResponse"/>
</wsdl:operation>
<wsdl:operation name="setUserPassword" parameterOrder="in0">
<wsdl:input message="impl:setUserPasswordRequest" name="setUserPasswordRequest"/>
<wsdl:output message="impl:setUserPasswordResponse" name="setUserPasswordResponse"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="LcimsForUserInfoSoapBinding" type="impl:LcimsForUserInfo">
<wsdlsoap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="getUserInfo">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="getUserInfoRequest">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://lcimsforuserinfo.webservice.lcbms.linkage.com" use="encoded"/>
</wsdl:input>
<wsdl:output name="getUserInfoResponse">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://lcimsforuserinfo.webservice.lcbms.linkage.com" use="encoded"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="getUserDet">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="getUserDetRequest">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://lcimsforuserinfo.webservice.lcbms.linkage.com" use="encoded"/>
</wsdl:input>
<wsdl:output name="getUserDetResponse">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://lcimsforuserinfo.webservice.lcbms.linkage.com" use="encoded"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="getAuthFail">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="getAuthFailRequest">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://lcimsforuserinfo.webservice.lcbms.linkage.com" use="encoded"/>
</wsdl:input>
<wsdl:output name="getAuthFailResponse">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://lcimsforuserinfo.webservice.lcbms.linkage.com" use="encoded"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="getUserOnline">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="getUserOnlineRequest">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://lcimsforuserinfo.webservice.lcbms.linkage.com" use="encoded"/>
</wsdl:input>
<wsdl:output name="getUserOnlineResponse">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://lcimsforuserinfo.webservice.lcbms.linkage.com" use="encoded"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="setUserPassword">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="setUserPasswordRequest">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://lcimsforuserinfo.webservice.lcbms.linkage.com" use="encoded"/>
</wsdl:input>
<wsdl:output name="setUserPasswordResponse">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://lcimsforuserinfo.webservice.lcbms.linkage.com" use="encoded"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="LcimsForUserInfoService">
<wsdl:port binding="impl:LcimsForUserInfoSoapBinding" name="LcimsForUserInfo">
<wsdlsoap:address location="http://localhost:8080/services/LcimsForUserInfo"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>

Two things you need to check
1) configuration.properties Make sure you have correct app server settings and user name password. If you changed your password you need to update this file also.
2) Stop WebServer clear web server cache and try reconnect.
3) Web server logs should provide more details.

Re: Password Assistant -- "The Missing Manual" references such a beast, but I cannot locate it. I have ver 10.6.8. Anyone out there who can help?

Similar Messages

Maybe you are looking for