Re: PLM4P v6003 Config Question:  Any way to configure UGM Notifications?

After reading:
PLM4P v6003 Config Question:  Any way to configure UGM Notifications?
This is one of the requirements from me as well. We always wanted to customize emails sent not only for UGM but also for other modules. We wanted to conveysome message to approvers. But it seems this is still not possible. Is this functionality on road-map of AgielP4P product management?

Currently, the subject and body of emails can be customized to an extent, as they are translations that can be overridden. The translations have some placeholder fields that get populated by the system, but you are limited to those placeholder fields. The upcoming release will give you full control of the email body and subject lines, for GSM and SCRM emails, as well as Supplier Rep emails.

Similar Messages

  • Is there any way to configure storage queue message encoding for Web Job's QueueTrigger?

    We have a web job that listens to Azure storage queue via QueueTrigger. The queue messages are not encoded when they are added to the queue:
    CloudStorageAccount account = CloudStorageAccount.Parse("...");
    CloudQueueClient client = account.CreateCloudQueueClient();
    CloudQueue queue = client.GetQueueReference("test1");
    queue.EncodeMessage = false;
    queue.AddMessage(new CloudQueueMessage("hello world"));
    And in the web job, we use the below method to listen to the queue.
    public static Task ProcessQueueMessageAsync([QueueTrigger("test1")]string message)
    And the web job crashes when it gets a message, with the below output. Unfortunately we cannot control the encode setting of the coming messages. So, our question is, is there any way to configure queue message encoding for Web Job's QueueTrigger?
    Thank you for any help and/or suggestion.
    Found the following functions:
    WebJobTest1.Functions.ProcessQueueMessageAsync
    Job host started
    Unhandled Exception: System.FormatException: Invalid length for a Base-64 char array or string.
    at System.Convert.FromBase64_Decode(Char* startInputPtr, Int32 inputLength, Byte* startDestPtr, Int32 destLength)
    at System.Convert.FromBase64CharPtr(Char* inputPtr, Int32 inputLength)
    at System.Convert.FromBase64String(String s)
    at Microsoft.WindowsAzure.Storage.Queue.CloudQueueMessage.get_AsString()
    at Microsoft.Azure.WebJobs.Host.Storage.Queue.StorageQueueMessage.get_AsString()
    at Microsoft.Azure.WebJobs.Host.Queues.StorageQueueMessageExtensions.TryGetAsString(IStorageQueueMessage message)
    at Microsoft.Azure.WebJobs.Host.Queues.QueueCausalityManager.GetOwner(IStorageQueueMessage msg)
    at Microsoft.Azure.WebJobs.Host.Queues.Listeners.QueueTriggerExecutor.<ExecuteAsync>d__0.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
    at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
    at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
    at Microsoft.Azure.WebJobs.Host.Queues.Listeners.QueueListener.<ProcessMessageAsync>d__11.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
    at Microsoft.Azure.WebJobs.Host.Timers.BackgroundExceptionDispatcher.<>c__DisplayClass1.<Throw>b__0()
    at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
    at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
    at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
    at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
    at System.Threading.ThreadHelper.ThreadStart()
    Press any key to continue . . .

    Hi,
    Thanks for posting here.
    I am not too sure if the storage queue messages can be encoded before the webjob listens to it.
    I am currently researching to gather more information with regards to your request.
    I shall revert back to you with an update at the earliest.
    Sincerely appreciate your patience.
    Regards,
    Shirisha Paderu

  • Any way to configure web proxy through .mobileconfig file on an iPhone?

    My organisation has recently acquired a large amount of iPhones and iPod Touches. As network administrator I am looking at how to ready the devices for our existing wireless network. I've looked into using the iPhone Configuration Utility which works very well, of which I can get each user to update the settings on the device through a .mobileconfig file.
    I haven't although found any method of configuring our web proxy server's details.
    Having searched online I've only found various responeses dated at least a year ago. Is there any method at all to deploy proxy details to the iPhones/iPod Touches?

    Hey man I would help with your question. But I also have some Q's. How can I email apple for my concerns? And how can I post my RSS OR in the forum is complicate. As you know for the iPhone apple hasn't changed the way the os looks like it's pretty simple. Last night I was in the T-Mobile store and I saw the new G2 I'm not a android fan just because of their lags. Apperantly the G2 was pretty responsive and I'm sick and tired of apples os for the iPhone its stuck in the past. Apple has to get more creative than android and get it going. Make the iOS 5.0 prettier than androids os. Please

  • I don't see any way of configuring a web server in 10.9; this was always present in previous releases.  How to I set up a website on OSX 10.9.1?

    I upgraded from Snow Leopard, where performance was great on my Mac Mini, to Mountain Lion, where performance is so bad that I'm now attempting a clean-install of Mavericks.  But, I don't see any way to set up my local website.  I don't see a Sites directory or any control in System Preferences to set up the web site.  How is this done in Mavericks?

    Yes, the functionality has departed System Preferences. Here is an updated guide to jump start your solution. It deals with the Terminal solution below.
    There are two approaches to launching a web server in Mavericks.
    Terminalsudo apachectl {start|stop|restart}
    System Preferences solutions
    Web Sharing Preference Pane (free, originally for Mt. Lion)
    VirtualHostX ($)

  • Any way to configure time machine?

    Hello:
    I have heard that there is a way to configure time machine so you can specify how often to back up the hard drive. Any thoughts?
    I am not sure why Apple chose not to allow the user to specify the time interval. Right now, I have 150 GB on my hard drive and over 300 GB in backups.
    Thanks,
    P

    There is a third-party utility called TimeMachineScheduler - VersionTracker or MacUpdate.

  • Any way of chosing the notification sounds?

    With 5 ipads in earshot its like having a nokia phone 3 years ago
    Who got a notification? What notification did I get?
    I'd like to have different one for email and other notification events as well as different from those around me.
    Any way of setting each of these to something different?

    Unfortunatly not. Would be nice though. I would so have the Mario one up and jumping sounds If we could choose.

  • File Duration Question: Any Way to Get Quick Totals?

    Another curious-if-there's-a-way-to-do-this question:
    I notice that Media Manager (for which I've now added a custom key command) will tell me the combined media file size for any group of clips I select in the FCP7 Browser (whether an entire Bin's worth, or even a non-contigous selection of specific clips therein). For individual clips of course I need only look at the Browser's "Size" column.
    Is there an equivalent way to do this vis-a-vis the total duration of a given group of clips -- again, whether an entire Bin's worth, or just a group of individually selected ones? The Browser has its Duration column with running time info for each separate clip, but is there any quick way to get the total, combined running time for a group of multiple clips?
    (An example would be wanting to quickly check how many hours/minutes of material was shot in a given setting, or on particular day, etc., without having to manually add up the Duration info for dozens of separate clips.)
    Any suggestions appreciated.
    Thanks,
    John B.
    Toronto

    While still hoping for a fewer-clicks, Browser-only solution, I have to admit that would indeed provide the desired information.
    Thanks for the reply!
    jb

  • Question - any way to set a Page Item in a worksheet to default to All ?

    Well, I seem to have run across an interesting situation here. I have a table worksheet with page items. I have noticed one thing while testing this new worksheet/workbook. If I pick a value for one of the page items (and with page items, it seems I can only pick one value at a time) and then save the worksheet, close the workbook, and then reopen the workbook and run the worksheet, Discoverer has retained the page item value as the value when I saved it, rather than defaulting back to <All>. So I quickly learned a new lesson with this darn Discoverer product - make sure all page items set to the <All> value before I save a worksheet that I am going to want to promote to Production.
    Well, now I have run into a situation where based on the conditions I have to set in the workbook, I have a Page Item in the worksheet that today has only 1 value that pulls into the worksheet. When I do the drop down on that Page Item, it only shows the one value. It does not give me the ability to pick the <All> option. So I am unable to save the workbook with the <All> value today for that page item. There are other potential values for this Page Item that could show up in the future.
    Now granted if this were to happen, the Viewer user could do the drop down on the page item at that time and pick the <All> value at that time. But alas, since they are not the owner of the workbook, they could only save as a new workbook, with themselves as the owner - cannot change the production workbook so it would be changed going forward. This also means the user has to realize that they are missing data and that the fixed page item value is the cause of that, which I am skeptical that they will be able to figure out. So I really want this page item value to default to <All> when the users open and run this worksheet.
    So here is my question - does anyone know of a way to set the Page Item value to be <All> automatically when a worksheet is run?
    I hope this makes some sense. Always a challenge to explain an issue well. It took me a bit to realize that when saving a worksheet/workbook, it was retaining the selected page item values when I performed the save. It is also very unusual to have a situation where a page item does not currently have multiple values. So this may be a situation that few people have run across.
    John Dickey

    Ah, there is a potential workaround, as I have finally figured out. The workaround does require that you have the ability to bring in multiple values for the page item from the worksheet run result set. If you have a situation, like I have, where today you only have one valid value, you will still have a problem.
    The workaround is this. Figure out a way to get multiple values into the worksheet run result set. That way when you do the page item drop down list, you will see the <All> value in that list. Pick that value, refresh the worksheet, and save the workbook. Now reset your worksheet back to your desired conditions, where you end up with just one value in the worksheet result set, and refresh the worksheet. The <All> is still retained as the page item default and when you do the drop down list for the page item, you see two values in the list - your 1 valid value plus the <All> value. So once you get that <All> set as the page item default, then it will be retained. This explains how support originally tested (on an existing worksheet) and said they were able to see and pick the <All> value.
    Since it should be rare for something to have just one valid value in a worksheet result set, and even rarer to have just one current valid value in Oracle, this workaround should take care of most of the situations where you might encounter this issue. I still will push for an enhancement request to have that <All> value show in the drop down list even when just one value in the worksheet result set.
    John Dickey

  • I forgot my security questions, any way you can look them up on your records?

    It is my first purchase on this device and it says I need to answer questions, I forgot my answers because ive been using my iPad and didn't have a problem. Please Help!!!

    Alternatives for Help Resetting Security Questions and/or Rescue Mail
         1. If you have a valid rescue email address, then use this procedure:
             Rescue email address and how to reset Apple ID security questions.
         2. Fill out and submit this form. Select the topic, Account Security. You must
             have a Rescue Email to use this option.
         3. This is the only option if you do not already have a valid Rescue Email.
             These are telephone numbers for contacting Apple Support in your country.
             Apple ID- Contacting Apple for help with Apple ID account security. Select
             the appropriate country and call. Ask to speak to the Account Security Team.
         4. Account security issues almost always require you to speak directly to an
             Apple representative to securely establish your identity as the account holder.
             You can set it up so that Apple calls you, either immediately or at a time
             convenient to you.
                1. Go to www.apple.com/support.
                2. Choose Contact Support and click Contact Us.
                3. Choose Other Apple ID Topics and choose the appropriate topic for
                    your issue.
                4. Follow the onscreen instructions.
             Note: If you have already forgotten your security questions, then you cannot
             set up a rescue email address in order to reset them. You must set up
             the rescue email address beforehand.
    Your Apple ID: Manage My Apple ID.
                            Apple ID- All about Apple ID security questions.

  • Any way to configure Oracle Vault .through command line

    I wanted to configure Oracle Vault in our enviornment
    I'm looking for some options to configuer through command line
    Is it possible if yes the steps / any reference.
    PS : New to this forum pl. excuse if its a repated one (tried to see relevant one but didn't find any) if any one can direct it would be greate.
    Edited by: 932549 on May 11, 2012 8:55 AM

    Hey man I would help with your question. But I also have some Q's. How can I email apple for my concerns? And how can I post my RSS OR in the forum is complicate. As you know for the iPhone apple hasn't changed the way the os looks like it's pretty simple. Last night I was in the T-Mobile store and I saw the new G2 I'm not a android fan just because of their lags. Apperantly the G2 was pretty responsive and I'm sick and tired of apples os for the iPhone its stuck in the past. Apple has to get more creative than android and get it going. Make the iOS 5.0 prettier than androids os. Please

  • Is there any way to configure domain name in place of IP address for "Peer VPN device"

    Hi,
    When I configure site to site vpn on asa it asks for the ip address for the remote vpn device and it works pretty fine if I confgure like this.
    The problem is that the remote vpn device does not have static IP address, it changes on every reboot. I have configured Dymamic DNS for the interface but the problem is ASA does not take domain name as the "peer vpn device" address.
    Is there any work around for this issue so that I don't need to configure vpn from scratch everytime the ip address of the remote device changes.
    P.S. ASA vpn configuaration also does not allow me to change just the ip address of the remote device in the VPN configuration, I have to delete the current vpn and confgure a new one from the sratch everytime the ip address changes.
    Thanks

    Hello Mahendra,
    yes you can set a hostname in the 'crypto map set peer' command insetad of IP address, however, the ASA will resolve that name only once it is applied, hence, it will take the IP that name currently holds, and if it changes, it will not update it.
    the easy solution for your case is to use static-to-dynamic L2L configuration. on your ASA, configure a dynamic crypto map, assign it to the static crypto map you have, and then add the pre-shared key to the Default L2L tunnel-group.
    an example is given below:
    crypto dynamic-map dyn_map set transform-set
    crypto map VPN ipsec-isakmp dynamic dyn_map
    tunnel-group DefaultL2LGroup ipsec-attributes
    pre-shared-key
    this way, you must initiate the tunnel from behind the remote device (not your ASA where the dynamic crypto map is configured) and it should work fine.
    the document below explains that in details:
    http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807ea936.shtml
    hope that help
    Othman

  • Is there any way to configure Mail to send mail only, not receive?

    I am very new to the world of Apple. I currently use Yahoo and I want to keep using Yahoo for my main email program, but I want to take advantage of the neat features on Mail (i.e. stationary, sending pictures, etc.). I don't want to keep any of my messages on the hard drive of my computer, and when I have tried setting up Mail, the messages are downloaded. So, I would like to know if it is possible to set Mail up so that I can only send, and not receive mail.
    I do use Yahoo, and it seems like there are some tricky things about using Yahoo and Mail, so I want to keep that in mind. Thanks!

    Hi,
    In MAIL -> PREFERENCES -> GENERAL
    For each account under the ADVANCED tab, UNCHECK the "Include when automatically checking for new mail."
    This will stop the program from getting your mail.
    tob

  • Is there ANY way to configure the wired ports on Airport Extreme with 7.6.1 software?

    I need to connect a Cisco router to one of the wired ports because I'm creating a home lab with several switches and routers and attached hosts. I need the VERY BASIC ability to set (or even just to SEE) what IP address the AirPort is using/assigning, but with the current AirPort Utility, you apparently can't show the DHCP table for wired connections or set up a static pool of addresses to use or really, to do anything else that is ABSOLUTELY BASIC networking configurations for a router. I don't even know what range of IP addresses the AirPort is using for the wired ports.
    I love this device - it works much better than my old Linksys that I replaced a couple years ago, but this is the Apple Nannies taking things too far. Sure, make the products easy to configure and use, but stop taking away the ability for advanced users to actually use the product because all you're doing is ******* off your power users - which are the exact people whose friends always ask for recommendations on what products to buy. I've always recommended Apple products to everyone, but if they're going to engineer everything so that only stupid people can use them, then only stupid people will buy (and recommend) them. (Can you tell I'm annoyed that I've wasted so much time on a completely unnecessary and irrelvant side-issue when I should be already working on my actual work project?)
    /Rant-off
    So, does anyone know how to access the actual configuration of the AirPort Extreme so I can use a static IP address for my Cisco router that's plugged into one of the AirPort's wired ports? That's all I need.
    Thanks.

    The AirPort assigns IP addresses via DHCP in a range you specify. You may also elect to assign devices their own static IP addresses. That does not involve the Extreme at all, though you may "reserve" those addresses in its DHCP Reservations table.
    AirPort Utility > Network > Network Options...
    Assigning static IP addresses obviates any need to determine the IP addresses the Extreme assigns.
    Update its firmware to version 7.6.3.

  • Any way to make ios notifications give more than 2 days notice?*

    Mountain Lion has a custom setting which allows you to pick any date you want.

    therosstamon wrote:
    Mountain Lion has a custom setting which allows you to pick any date you want.
    ....but the iPad calendar does not. What you see is what you get in the iPad calendar. There are no other custom settings for the notifications..

  • IPhone 3G - Any way to configure mail received to be just the message only?

    I’m trying to set a client up to start using iPhones and we want to just have them receive messages only and leave any attachments on the server.
    If they can get just the message and not the attachments, their data plan will travel a lot further.
    The full message (incl. attachment) will be available on their MacBook Pro when they next check their messages on that machine.
    Any one know how to set this up - there doesn’t appear to be a setting that covers this.
    Regards,
    Mark

    Where is this client located?
    If in the U.S., at&t's data plan for the iPhone is unlimited.
    There is no such setting available with the iPhone.
    Photos attached to a message will be downloaded with the message automatically when the message is opened regardless the connection, but any other type of attachment will not be downloaded when connected via the cellular network when the message is opened until the attachment included with the message is selected in the message body to be opened/viewed. I've experienced the same with some larger attachments when connected via wi-fi.
    When downloading email, only the first few lines of the message is initially downloaded depending on the number of preview lines selected - with 5 being the max. The entire message is downloaded when a message is opened excluding any attachments except for photo attachments, which are displayed inline or viewed in place within the body of the message.

Maybe you are looking for