Re: Report for showing comparsion between Inventory & Norms

Hi All,
I have a requirement for developing a report where I need to compare the current inventory for a plant and compare it with the predecided inventory norm & to get red flagged in case there is a dissference between this comparision.
Regards,
Vivek

Hi,
Current Inventory is available in table MARD at storage location level with different stock types
From where you are going to pull the norms ? Probabaly may need to create one Z table to update norms
with Material, Qty stock type and storage location and run report between MARD and Z table
Just to give you head start, you can explore further
Thanks
Diwakar

Similar Messages

  • Report for showing pending (ageing) quantity according to store location w

    dear ABAP Gurus,
    I have made a roport for showing pending (ageiing) quantity acc to location wise.
    and i m sending here the code i made for same.Tell me if sme amendments required.
    Report for showing pending (ageing) quantity according to store location wise:   
    1.     Fields on selection screen (input screen) : Plant code From to , Material code From to , Current date, Numbers of days(for display the ageing(pending) balance for a given period,Storage locations from to.
    2.     Field in the output List : Material code , Material descriptions, Balance quantiy,Balance value ,Consumptions date. 
    the code is:
    REPORT  ZAGEIN_SUDHA.
    TABLES: mara,mseg,makt.
    TYPES: BEGIN OF t_mara,
    matnr LIKE mara-matnr,           "material number
    maktx LIKE makt-maktx,           "material description
    ersda LIKE mara-ersda,           "material creation date
    lgort like mseg-lgort,           "storage location
    bwart like mseg-bwart,           "goods received or issued
    menge like mseg-menge,           "value at movement type
    werks like mseg-werks,           "plant
    END OF t_mara.
    DATA: i_mara TYPE STANDARD TABLE OF t_mara with header line,
          itab type standard table of mara with header line,
    *wa_mara TYPE t_mara,
    v_date TYPE i,                      "age in days
    GI type mseg-menge,                 "goods issued
    GR type mseg-menge,                 "goods received
    bal type mseg-menge,                "balance
    total type i,
    grace type i,
    g_quan type mseg-menge.
    SELECTION-SCREEN BEGIN OF BLOCK b1.
    SELECT-OPTIONS: p_matnr FOR mara-matnr.
    select-options: p_werks for mseg-werks.
    select-options: p_lgort for mseg-lgort.
    SELECTION-SCREEN END OF BLOCK b1.
    START-OF-SELECTION.
    REFRESH i_mara.
    SELECT mr~matnr                        "mara-matnr
    mk~maktx                               "makt-maktx
    mr~ersda                               "mara-ersda
    mg~lgort                               "mseg-lgort
    mg~bwart                               "mseg-bwart
    mg~menge                               "mseg-menge
    INTO corresponding fields of table i_mara
    FROM mara AS mr INNER JOIN
    makt AS mk
    ON mrmatnr = mkmatnr INNER JOIN mseg AS mg on mkmatnr = mgmatnr
    WHERE mrmatnr IN p_matnr and mgwerks IN p_werks and mg~lgort IN
    p_lgort.
    total = 0.
    IF sy-subrc = 0.
    *CLEAR wa_mara.
    LOOP AT i_mara.
    if i_mara-bwart = '101' .
    GR = total + i_mara-menge.
    total = GR.
    elseif
    i_mara-bwart = '102' or i_mara-bwart = '122'.
    GR = GR - i_mara-menge.
    endif.
    if i_mara-bwart = '261'.
    GI = total + i_mara-menge.
    elseif i_mara-bwart = '262'.
    GR = GR + i_mara-menge.
    endif.
    bal = GR - GI.
    if bal GE  GR.
    grace = 30.
    else.
    grace = 10.
    endif.
    g_quan = bal - GR.
    v_date = sy-datum - i_mara-ersda.
    endloop.
    WRITE: / i_mara-matnr ,i_mara-maktx,' is ',v_date,' ,days old  and
    stored at' ,i_mara-lgort ,   ' with balance =', bal ,'the grace time is
    ', grace, 'and' ,'grace quantity is ' ,g_quan.
    *ENDLOOP.

    Hi,
    That sounds like a nice report.  What about it?!
    Gareth.

  • Report for showing pending (ageing) quantity according to store location wi

    Report for showing pending (ageing) quantity according to store location wise:   
    Fields on selection screen (input screen) : Plant code From to , Material code From to , Current date, Numbers of days(for display the ageing(pending) balance for a given period,Storage locations from to.
    Field in the output List : Material code , Material descriptions, Balance quantiy,Balance value ,Consumptions date.

    Hi,
    That sounds like a nice report.  What about it?!
    Gareth.

  • Report for date variances between delivery and goods receipt date

    dear guru ,
    i search a standard report for date variances between delivery date in the purchase order and the goods receipt date.
    Do you help me ?
    Thanks

    Hi,
    Use Report ME80FN and here check the delivery schedule option in output screen.

  • Calling infotype 0002 in ALV  report for showing employee photo

    Hi all,
    The requirment from business side is a report in which employees personal data shuold be shown with employee photo, I had tried for employee photo in ALV report but it didnt sucessed, then I went for other solution like calling transaction in ALV report.
    In this case I am calling Infotype 0002 but the issue is that the transaction PA20 is coming with PERNR but I am not able to go directlly to infotype which shows employee Photo,please suggest any solution.
    Thaks.
    JAY

    Hi Jay,
    It is possible. Please refer the syntax for the CALL TRANSACTION
    CALL TRANSACTION ta { [AND SKIP FIRST SCREEN]
                        | [USING bdc_tab [bdc_options]] }.
    You can do a recording till the required page comes & call the transaction accordingly. Hope, you are aware about the same.
    For example, I just had a solution to go to the roles tab in the user profile and I did as below:
        CLEAR wa_bdcdata.
        wa_bdcdata-program  = 'SAPLSUU5'.
        wa_bdcdata-dynpro   = '0050'.
        wa_bdcdata-dynbegin = k_ok.
        APPEND wa_bdcdata TO it_bdcdata.
        CLEAR wa_bdcdata.
        wa_bdcdata-fnam  = 'BDC_CURSOR'.
        wa_bdcdata-fval   = 'USR02-BNAME'.
        APPEND wa_bdcdata TO it_bdcdata.
        CLEAR wa_bdcdata.
        wa_bdcdata-fnam  = 'USR02-BNAME'.
        wa_bdcdata-fval   = g_value.
        APPEND wa_bdcdata TO it_bdcdata.
        CLEAR wa_bdcdata.
        wa_bdcdata-fnam  = 'BDC_OKCODE'.
        wa_bdcdata-fval   = 'SHOW'.
        APPEND wa_bdcdata TO it_bdcdata.
        CLEAR wa_bdcdata.
        wa_bdcdata-program  = 'SAPLSUU5'.
        wa_bdcdata-dynpro   = '0100'.
        wa_bdcdata-dynbegin = k_ok.
        APPEND wa_bdcdata TO it_bdcdata.
        CLEAR wa_bdcdata.
        wa_bdcdata-fnam  = 'BDC_OKCODE'.
        wa_bdcdata-fval   = '=ACTG'.
        APPEND wa_bdcdata TO it_bdcdata.
        g_opt-dismode = 'E'.
        g_opt-defsize = k_ok.
    *** if user click on the User Name, call SU01
        CALL TRANSACTION 'SU01' USING it_bdcdata
                    OPTIONS FROM g_opt.
    Regards,
    Selva K.

  • Sap standard report for showing line items of any GL with its offsettinga/c

    Dear all,
    Is there any standard report in SAP to show line items of GL with its offsetting accounts. in short i want to see all journal entries of one specific GL account.could any of you help me in this?
    points will be rewarded for the relevant answer.
    thanks,
    hemanth

    Hi Dave,
    I have gone through the note 112312.But there it is mentioned that it relates to 4.6x versions.We are in ECC 6.0.and we have not implemented new GL accounting concept.Is there any other alternative functionality or any other OSS note which meets my requirements.Can you please suggest me on this ?
    Thanks,
    Hemanth

  • Report for Average Cost of Inventory?

    Is there a report which can be run to see the average price of all inventory? Or even for inventory which in considered historical (already sold a few months ago).
    thanks,
    Mike

    anyone know the answer?

  • SAP standard report for showing the stock at customer location

    Hi All,
    Can any one let me know if there is a standard SAP report which can show the following
    Stock at the customer location on a monthly basis
    I tried the following t-code - MB58 but that doesnt have the
    From date - Till date
    Any pointers on this one will be really helpful.
    Regards,
    Pandi

    Hello,
    MB52   -   List of Warehouse Stocks on Hand
    MB53   -   Display Plant Stock Availability
    MB5B  -    Stock for Posting date.
    Prase

  • How to create report for Slow / Non moving inventory

    Hi
    I want to create one report Slow / Non moving inventory reports.
    I need it in following form
    Plant     Material     Desc     UOM     Current stock     Value     Last consumption date      Last Movement date
    I have found & confirmend table & fields names from which data should come into this report which is as follows
    Plant(T001L - WERKS)     Material(MARA - MATNR)     Desc(MAKT - MAKTX)     UOM(MARA - MEINS )     Current stock(MARD - LABST)               Value(MBEW-SALK3.)     Last consumption date (BUDAT - MKPF)          Last Movement date(BUDAT - MKPF)
    As I am creating this report at first time, I am not getting how to go ahead.
    Do I need to create new datasource as existing datasource doesnt have all of these fields..
    Please help me.
    Dont send me links & documents which are there on sdn. I already have gone through it.
    Thanks
    Swati

    Hi
    You have to create Generic Data source as you know the filed/tables names.
    Hope you know how to build a Generic Delta or else.https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    Create a Generic Data Source
    a). Select the Data Source type and assign a technical name to it.
    b). Choose Create The screen for creating a generic Data Source appears.
    3. a) Choose an application Component to which the data source is to be assigned.
    b) Enter the descriptive texts. You can choose these freely.c) Choose Generic Delta.
    4. Specify the delta-specific field and the type for this field. Maintain thesettings for the generic delta:
    Specify a safety interval. (NOTE: Safety interval should be set sothat no document is missed u2013 even if it
    was not stored in the DB table whenthe extraction took place.
    4. Select Delta type: New status for changed records (I.e.after-image); This can be used with Data target ODS (AIE). Additive Delta (I.e. aggregated data records) (ADD)Then choose Save.
    6. After step 4, the screen of step 3 comes back. Now choose Save again. This will generate the data source. After generating the data source, you will see the Delta Update flag selected.
    7. Choose Save again.
    Hope it helps

  • Transaction or report for showing partitions and total amount in BW 3.5?

    Hello,
    I want to fulfill a unicode conversion of a BW 3.5 system and found out, that this system has some tables with plenty of table partitions (700-1200). To calculate the table splitting it would be very helpful if there is a transaction or report where I can enter the name of a table and the result will be the amount of partitions and the calculated sum of all partitions including the header table.
    Does this exist in a SAP BW 3.5 system?!
    If not, are there useful alternatives?
    Thanks in advance

    Hey you two,
    Yes, I know already DB02 and I used it to show a list with object type "TABLE PART*". But then, I get a list of ca. 4900 table partitions. I just want to have a list looking like:
    /BIC/B000637000      155 Partitions   106,0 Gb Whole Size
    I don't want to know the partitions themselves, but the amount and the header table - and of course the whole size. Is that also possible with DB02?

  • Zen Reporting Infoview not pulling the inventory info I want

    I am trying to pull some useful Inventory information from the managed devices but the Report generated does not CONTAINS all the information I needed or at least not pulling the right information from the Managed devices (agents are installed) Here is the scoop: Reports -> Zenworks Reporting Server Infoview -> NEW -> Web Intelligence Document -> and here we can see the Universe Pane. The questions what to select to add item to the right pane so that I can generate some report that shows all the Inventoried pc (with agent installed) right now I selected and tried many attributes or items but only show the DNS, IP address and none of the HD, CPU, Serial number and Manufacturer and others on the GENERATED report. Here is the sample of the Reported generated for your review. It only DNS name, Machine name, Platform, machine GUID and the rest are NOT showing which were selected and there are: hard drive size, memory type and size, cpu type, vendor name and so and whole bunge of them.

    jlau168,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Forums Team
    http://forums.novell.com

  • Report for open purchase order quantity

    Dear experts,
    Is there any report for showing open purchase order quantity for which goods are not yet received?
    Regards
    babu

    Hi
    ref the blw link which will have the complete sap std reports
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/erplo/sapStandardReports

  • Report to show Delivered Parts in a given month

    Hi All,
    Is there an MC Report which shows deliveries between July 2008 till today? I don't want to use MB51 as that shows standard price ...
    Thanks

    Hi,
    You can  use ME2N also.
    Regards
    Murugan

  • Difference Between Inventory Audit Report & Inventory Positing List Report

    Dear all,
    Please tell me the difference  between these twoInventory Audit Report & Inventory Positing List Report, Because I find difference , when observe Closing and Opening Stock Quantity on 1.4.10 audit report showing 610 units but on 1.4.10 posting list showing 973 units of opening stock
    Why so happen ? can anybody explain............
    Thank you
    Komanduri

    Hi......
    Please read below.....
    Inventory Audit:
    This report provides an audit trail for the posted inventory transactions in the chart of accounts.
    You use this report to make comparisons between the accounting view (inventory balance accounts)
    and the logistics view (inventory value displayed by the audit report). The report explains the value changes in inventory accounts.
    Inventory Posting List:
    The inventory posting list provides an overview of all postings in the system, based on various selection criteria and sort options. You can generate a report for specified warehouses based on one of the following selection criteria:
    Item
    Business partner
    Other: Enables you to specify a selection criterion such as warehouse or sales employee.
    Inventory Transfer:
    You use this function to transfer inventory from one warehouse to another. An inventory transfer can also be carried out as a consignment for a customer. The items are then stored in the customeru2019s warehouse and are sold from here.
    You cannot change the table after it has been added. If you display an existing inventory transfer later on, none of the fields in the table are active.
    You can, therefore, only correct an inventory transfer table that has not been entered correctly by entering a compensatory goods movement later.
    For more detail please refer help file in SAP.....
    Regards,
    Rahul

  • Inventory report for valuation type

    Hi experts,
    Is there any SAP standard reports can show the inventory value based on the valuation type?
    we have actived the split valuation, so one material may have several valuation types. Different valuation types have different MAP and amounts.  Now we want to find the inventory value for each valuation type, for the whole inventory.
    tcode such as MB51 only can display every movement details, we want to find a report for all materials.
    Thanks.

    Hi
    Pls try MB5L
    Regards
    Sanil Bhandari

Maybe you are looking for