Re run the initial CCX wizard

Hi guys
i want to re run the initial wizard of the uccx 7
i know this can be done through the service utility of the uccx but i need to know what option i have to change and what value i have to put to rrun the initial wizard of the webadmin page where the dfault login wil be administrator
thank you

This was explained here: https://supportforums.cisco.com/message/1050804#1050804
Note that CET was intended for TAC only. Use at your own risk.

Similar Messages

Why do i get a daq hardware configuration required window when trying to run the daq solution wizard?

i have recently installed the ni 4552 for pci dynamic signal analyser, and am attempting to configure my system and teach myself labview. when attempting to run the daq solution wizard i am presented with the daq hardware configuration required window.
Attachments:
DAQ_Hardware_Configuration_Required.ppt ‏38 KB

hi brian, thanks for your help. i have recently received version 6.1, and done a complete re-install. i have also downloaded the latest ni daq (6.9.2) and ni dsa (6.11) versions and installed them, but still i get the same error message when trying to open the solutions wizard (please see attached powerpoint presentation).
upon selecting the "go to ni daq config utility" option MAX opens. everything appears to be in order (device passes test, test panels run ok and virtual channels are configured correctly). i am unable to go any further.
i would appreciate any guidance that you are able to give me in this matter. many thanks in advance of your help.
best regards,
ben halkon

Hi I'm try to set up a new Epson printer SX 445 to my router/network but each time I run the set up wizard it fails to complete saying Security Key/Password Check fail. *entered security key/password does not match the one set for for router. I know th

Hi
On my macbook pro
I'm try to set up a new Epson printer SX 445 to my router/network but each time I run the set up wizard it fails to complete saying Security Key/Password Check fail.
*entered security key/password does not match the one set for for router.
I know that the password is correct and have rechecked this by changing it a few times
and I still get the same result.
My network internet service provider is not interested and says to call Epson.
Anybody have any clues how I can resolve this?
Regards

I personally suggest the new Drobo FS. Since it has an iTunes server built in and you can use any size sata hard drive in it it is better and a NAS that has to use the same size drives.

Error while running the diagnositc system setup wizard

Hello All,
When I am running the diagnstics setup wizard,I am getting the following warning for SSO.SMD is the SID for my solution manager system and it is ABAP+JAVA system:
SSO Setup : both Java and Abap stacks are using a ticket certificate with identical DN : 'CN=SMD'
SSO will not work with such add-in configurations. Please refer to Details below for manual actions to be taken, and run this setup step again.
Step SSO Details
Either the Java ticket certificate or the Abap ticket certificate of the managing system (ABAP Host=localhost sys=01 client=200) must be deleted and re-created, using a Subject DN other than 'CN=SMD'
For ABAP stack : please use transaction STRUSTSSO2 to delete the system PSE, and recreate the PSE Own Certificate with a different name (NB : this will destroy any existing SSO Setup on ABAP side)Or, for Java stack : please refer to SAP Note 701205, section 'J2EE', third bullet and note attachments (ReplacingPublicKey.pdf) for doing it on Java stack
Also I am getting an error:
The upgrader doesnt run,it says the SMD upgrader will be run
What does this mean
Please help
Rohit

Thanks Jagan
I have run upgrader as u mentioned here
Just needed to confirm
Well I will correct the SSO as u mentioned,Thanks
Also I am getting an error for wily interscopy while I run the setup for managed system
I will post that in a diferent post
Thanks
Rohit

I have used the easy transfer wizard to export/import data incl TB, do I now move all the Mbox folders between profiles to move the mail contents?

I installed TB on the win8.1 box and have run the easy transfer wizard to import my data. The support item showing how to mark up my TB data for inclusion in the easy transfer wizard was very useful for this, but it does not describe how to get TB to recognise the imported profile.
I can see two profiles in the folder: C:\Users\Andrew\AppData\Roaming\Thunderbird\Profiles
and one appears to contain my old data, the files in the other profile are very small by comparison.
My question is whether I should move (or copy) the mail folders (or all folders/files) from the imported profile to the new one, overwriting any files where relevant? Alternatively, is there a way to get TB to recognise and use the imported profile?
I did look at the profile manager but it does not recognise the imported profile.
Thanks in advance for any assistance.
Andrew

I decided to do the following:
1. renamed the profile folder created after installation of Thunderbird, to a name like nnnnn.default.bak
2. renamed the imported profile folder to the recently created profile nnnnn.default.
3. Restarted TB.
All working fine. All my email for the three email addresses has been transferred from the old computer to the new.

Office Test Drive: relaunching the initial Entourage setup?

I have been playing about with the Office Test Drive--does anyone know how to run the initial setup that Entourage performs on its first launch, again? I was testing the import of an old database; now that I see it works well I want to trash that database and rerun the initial setup again, but there is no option to do so that I can find.
1. "Import" does not work as it won't allow me to select from the Office Identities or Main Identity or Database folder/files. (I want to do this from a backup of the database and not from a program itself. This worked on the initial setup but does not seem to want to work in the "Import" command.)
2. I cannot seem to trash the old identity; when I drag it to the trash it goes into the trash but the trash will not allow me to empty it as it says the Database is in use.
3. Holding down the option key upon launching Entourage worked once--it went to launch Database Utility but quit unexpectedly, and when I launched Entourage it was wiped clean and gave me the "new import" option, but I wasn't prepared to install the new database at that moment and now launching Entourage again does not give me that option. Also, when I have tried that trick again--holding down the option key during the lauch of Entourage--Database Utility launches correctly now! It does not "wipe clean" the program this time.
Should I delete the Office Test Drive and reinstall a new copy? I found it on Mactopia; I'm just worried that the computer will detect that I'm reinstalling Test Drive and refuse to allow it. (I still have 30 days left of the Test Drive as it stands now.)
Any other suggestions?

It doesn't make sense to me that you would have a
problem like this. I have bought 2 iMacs this year.
One of them was about 7 weeks old when I got it and
my installation of the test drive worked just fine.
Bought a 3 month old e Mac last year and used the
test drive for 30 days while awaiting delivery of my
full version of Office.
It has nothing to do with the date the software was
installed but from the date it was first opened.
Wierd problem. Did you buy this Mac new?
yes brand new, from the apple store online at apple.com,, I talked to some guy on the apple help chat thing and he said my machine was manufactured on 10/22/05 I ordered it 11/28/05. Anyway I did trash it lastnight and am going to try and reinstall it it. The tech suggested it then he said he didnt think it would work lol. I also downloaded the program suggested and it works well also.. so either way Im covered now.

Amount in the tax payment wizard Against PLA remaining for BED is negative

Hi All,
I have made an outgoing payment selecting PLA radio button for BED,Ecess & Hecess in order to deposit the amount againg BED,EcEss,Hecess in PLA account.
Now when i am trying to run the tax payment wizard ,system is showing me the -ve amount in the PLA remaining column against the BED,Ecess,Hecess.
I am facing the problem to move ahead to the next step in the tax payment wizard as system is showing the error and not not allowing to move ahead.
PLease suggest how can i proceed.
Regards,
Atif Mian

Hi Atif
The problem is with your date selection criteria.
With what date range you are trying do run Tax Payment Wizard differs with the date when you fill PLA Account via Outgoing payment.
Just check and let us know please.
Regards,
Rahul

Is there a setup log for when you run the DA role setup?

Hi,
Is there a log of all the actions that are taken when you setup the DA role on a server and then run the configuration process?
I have a Windows 2012 R2 server that I run the initial setup for the DA role and followed some of the basic instructions to setup for Windows 8/8.1 clients only. While the configuration process was running and showing what it was doing there was a
warning about NRPT and name resolution and something about adding an exclusion. I'd like to go back and figure out what that was so I can handle it properly.
Thanks in advance
Nick

Hi,
Is there a log of all the actions that are taken when you setup the DA role on a server and then run the configuration process?
I have a Windows 2012 R2 server that I run the initial setup for the DA role and followed some of the basic instructions to setup for Windows 8/8.1 clients only. While the configuration process was running and showing what it was doing there was a
warning about NRPT and name resolution and something about adding an exclusion. I'd like to go back and figure out what that was so I can handle it properly.
Thanks in advance
Nick

Cannot get Win8 Pro computer run the Connect a Computer to the Server Wizard (computerconnector) of Essentials 2012

I've spent 1/2 the day trying to troubleshoot this problem and finally give up.
My client has a Windows Server 2012 Essentials server (with all updates installed - no errors in error logs nor SFC /SCANNOW). Purchased a new Windows 8 Pro computer, which we installed all the updates from Windows Updates and are now trying to join
the domain using the "Microsoft way" (i.e.: http://[servername]/connect).
The site comes up and it prompts us to download the software and run... so far so good, but when we get to the screen where it asks, "Type your new network user name and password" - the next screen after that we get the error, "Cannot connect
this computer to the network...".
I've been looking at cases all day long through Microsoft and Google - all pointing to problems with the SSL on the server - that's not the problem here (as other workstations have, in the past, successfully connected and we verified today that the local
server certificate is what is the default, as it should be).
I've tried just about everything I can think of and cannot get this silly wizard to work (why Microsoft, WHY!??!?!). Yet, I can join this domain just fine doing it through normal means. I've even tried joining the domain this way, and tried installing
the software afterwards (as the Essentials Console won't reflect the new workstation, thus it won't add it to group policies etc... though yes, I could manually do that and have - but we'd still like to get it to show up in the console). I even
tried the trick noted in a KB talking about running the connect software without joining the domain (registry key that gets added) - that didn't work either.
I'm out of ideas - and at this point had to get the client online and working today - so we joined it manually, configured it and left it. But I would like to get this fixed the "proper" way. Help?
I do have the clientdeploy.log file - which only points out an internal error, but I'm unsure how to enable the improved logging it suggests (I'll gladly post the logs if someone tells me how - I'll skip posting the log file here for now):
[1544] 140204.203620.0794: ClientSetup: MachineIdentityManager.GetMachineStatus had errors: ErrorCatalog:NetworkError ErrorCode:-1
BaseException: Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityException: MachineIdentityManager.GetMachineStatus ---> System.ServiceModel.FaultException: The server was unable to process the request due to an internal error. For more
information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on
tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
Suggestions? Thoughts? I hope Essentials 2012 R2 improves this - as I've had this error for other various reasons with other clients (and spent 1/2 days troubleshooting to clear those up). Essentials Connect, IMHO, needs a re-write - as
it's been nothing but a hassle... miss the SBS connect.

Hi slemay,
Before going further, please uninstall the Connector software from Control panel. Then connect again, will
the same issue persists? Would you please use another client to connect with the Server 2012 Essentials by using this way? Then monitor the result. Please make sure the computer has a physical connection to the local network.
Please refer to the TechNet article (Here)
and troubleshoot, then check if can help you to solve it.
In addition, please refer to the following articles and enable
WCF tracing to go further. Please check if you can find some clues.
How to enable WCF tracing
http://blogs.msdn.com/b/madhuponduru/archive/2006/05/18/601458.aspx
[wcf: solution] The server was unable to process the request due to an internal error.
http://blog.bitlinkit.com/wcf-solution-the-server-was-unable-to-process-the-request-due-to-an-internal-error/
Hope this helps.
Best regards,
Justin Gu

For the AD FS Wizard how do I configure a certificate so I can run WCF applications on my server

For the AD FS Wizard how do I configure a certificate so I can run WCF applications on my server.
Certificate Status: This CA Root certificate is not trusted because it is not in the Trusted Root Certification Authorities store.
In IIS under Server Certificates:
IIS Express Development Certificate
It will not let me "Complete Certificate Request" because I do not have a ".cer" certificate file.
How do I get ".cer" file for this Certificate or maybe make one in IIS 8.0 not Express?

You need to make the certificate trusted by adding it in the Trusted Root Certification Authorities
store using Certificates snap-in. You can use Certificates
snap-in in MMC to export the certificate in a .cer file.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7

Hi Techys,
Kindly help me to resolve the below issue
"Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7"
Many Thanks,
Madhu

Hi,
Follow this link for smooth installation for SP 2010 on Win 7.
http://msdn.microsoft.com/en-us/library/office/ee554869(v=office.14).aspx
Murugesa Pandian.,MCTS|App.Development|Configure

How do I install the WPSM54G setup wizard on a MAC running OS X Lion?

Hi,
I can't seem to get the set up wizard to open on my Apple MAC. I can download the setup file from the support website, but clicking on the wizard file does not open the setup menu. Any ideas what to do? On my windows laptop, I can just extract the zip file or 'run'.
Thanks in advance.

The WPSM54G may or may not work with MAC operating system. Based on this link - http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=49273cdd85ee4c928d9cf5c12d4c6cc3_16914.xml&pid=80&..., the compatible operating systems are Windows 2000, XP, or Vista (32-Bit), Windows 7 (32-Bit). However, you may try to manually setup the printserver on a mac computer and use TCP/IP or LPR.

How can I get flash 11.6 to run the Wizard on Singsnap?

After installing the latest flash player 11.6.602... I cannot run the wizard on the singsnap site. It's been about 2 months now..The wizard helps me to record songs properly.All I see is a white screen and cannot get into the wizard..if anyone is familiar with singsnap...I have Windows 7...
Jairre

Have you tried contacting Singsnap? Are you able to use your microphone with any other flash website?
http://www.midomi.com/index.php?action=main.mic_check

The attached VI works when I run it initially creating the XML file, but when run after the XML file is created, it's not updated. What am I doing wrong?

The attached VI works when I run it initially creating the XML file, but when I change data and run after the XML file is created, it's not updated with new data. What am I doing wrong?
Thank you.
Solved!
Go to Solution.
Attachments:
Attractive Force XML.vi ‏23 KB

That looks like the logic which was written into the VI
Inner true/ false case:
(file exists : false) write to XML file, unflatten for display
(file exists : true) read from XML file, unflatten for display
At no time when the file exists (true case) is the XML file updated...

I cannot get the Firefox setup wizard to run on my laptop, which runs Windows XP.

I have a Compaq Presario which runs Windows XP. I have 1.12 GB of RAM, a 1.59 GHz processor, and more than 30 GB of space on my hard drive. I can download Firefox, but I can't get the setup wizard to run. After I get it downloaded and try to run the wizard, my computer hangs up. I have tried both saving it and running it right off the bat. Neither way works. I need to have Firefox on my machine, so any way I could get help with this problem would be great. Thanks.

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with installing Firefox.
You can try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes installing work.

Re run the initial CCX wizard

Similar Messages

Maybe you are looking for