Re: script tabs
Hi,
I am facing one problem with the script tabs. I have to print three text columns.
20,30,40 lengths of three columsn.
how to set the tabs to fix the lengths of teh columns and how to write it in the script editor.
rgds
p. krishna prasad
Hi Krishna,
In your form create a new paragraph format. In that paragraph format got to TABS option and mention the required lengths and their positions in the tab positions provided. In the window in which you want to use these tabs write two commas without any space.(,,). This represents a tab positions. Suppose you want to print v1 , v2 and v3 in the three tab positions defined write as ,,&v1&,,&v2&,,&v3&. This will print v1 value at first tab position , v2 in the second and v3 in third tab position.
Thanks and Regards,
Bharat Kumar Reddy.V
Similar Messages
-
All scripts are missing from scripts tab
I dont know why but all the scripts that were in my scripts tab are missing. This happened once before and I found a fix but cant locate the steps to that again. I remember it had something to do with backing up a few files and have ID recreate them or something. Any ideas?
Follow this link and try resetting your indesign prefrence.
Shonky -
Script tab info req??
hi
i had an req like to display in format the quantity with there values below them:
quan1 quan2 quant3 quan4 quan5
value: 10 11 12 13 14
my above line is displaying like this,but below line is coming:
value: 10 11 12 13
14
i want to take this in same line,below there respective quantity lables.pleae tell how to do?
also when i make a para p7,the TAB option in that shows only 3 tabs,tell what to do,if fileds in a line are 5,6,than how to give tab spacing b/z them.
my code:
P8 INVOICE VALUE:
= &DTL2-MENGE&,,&DTL2-RATE&,,&DTL2-RATE1&,,&DTL2-RATE2&,,&DTL2-VALUE&
tabs in P8
1. 2cm
2. 3cm
3. 4cm.i am not very much clr with this tab funda,plz explain me.
regdsThis is how tab concept work in SAPscript or in Smartform.
Go to your paragraph format and click on tabs.
Now define all your tab scpaces here.. Since you have 5 variable your can define either 5 or 4 tab spaces, for your undertanding I will define 5 tab spaces, let us assume our paragraph format is AS
Tabspaces: for paragraph AS
Tab Position Alignment
0.2 CM LEFT
1.2 CM LEFT
3.7 CM LEFT
5.5 CM LEFT
6.5 CM LEFT
Now inside your window call you paragraph format with tab spaces with all your variables as shown below
AS ,, &variable1& ,, &variable2& ,, &variable3& ,, &variable4&,, variable 5&
In above ,, --> represents tab spaces
since, before variable 1 we have given a tab space as shown above it will print at 0.2 CM position from window start and second variable will print from 1.2 cm from start of window and 3rd variable will print at 3,7 CM from start of window and so on...
Close the thread once your question is answered.
Regards,
SR -
Script(tab positions)
hi to all,
help me in this issue
i have defined a paragraph format and tab postions for 7 colums
and in main window i have assigned that paragraph format but the paragraph format is not working.
for amounts can i kept as (R) for right alignment of amounts but it is also not working the amounts r not aligned.
thanks in advacne
kiran kumarhi,
did u give like this
Assume DP is ur paragraph format
DP ,,&itab-v1&,,&itab-v2&,, and so on
define tabs as follows
1 5.00 cm left
2 10.00 cm left
don't think that if u give right it is assigned to right like that
left means from left it move to the 5 cm position and then display at that position ,right means from right corner it will adjust the alignment
better to define all tabs either to left or right to avoid confusion,it takes some time time to ajust properly,activate the code before u test
do assign points if it helps you -
Hi,
I have an issue in creating Tab position under Paragraph section. I have to display a column like which 10 character length and it is numeric value and also it needs to right justified.
if i make the tab right justified .. will system start printing it from right to left or left to right? this is my question.Hi,
if it's right justified it will work as below,
say you have a tab format
P1 5CM Right justified,
in this case it leaves 5CM from the left side of your window & then starts printing from RIGHT TO LEFT.
say if it's left justified output is,
>--5CM---->TEST
right justified output will be,
>----
>TEST.
>--5CM>
hope this helps.
Regards,
Raghavendra -
Need help with a script applied by GPO
Hello,
I need to automate WebFeed insertion for Remote App Users at user logon.
RDS 2012 R2 in place. Remote Apps are provided to W7 clients.
Currently, WebFeed link must be inserted manually in each user's Control Panel\RemoteApp and Desktop Connections. There
is no straight forward way from Microsoft.
But there is a script and instruction I found on web...
I followed the instruction... Created GPO. GPO applies to user but nothing happens.
Can somebody check the script and the instruction that I could wrongly applied.
In instruction there is no word about changing something in the script but only wcx file that the script should
use.
The script is below and here is my .wcx file:
<?xml version="1.0? encoding="utf-8? standalone="yes"?>
<workspace name="Enterprise Remote Access" xmlns="http://schemas.microsoft.com/ts/2008/09/tswcx" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<defaultFeed url="https://my_webserver_real_FQDN/rdweb/Feed/webfeed.aspx" />
</workspace>
I changed the quotes to vertical (") from (”) that
were in my wcx when copied the lines from web.
Still not works.
I
checked Application log, PowerShell and RemoteApp in eventviewer under user session
Everything is clean.
Were I can check the script execution log?
When the user with applied script logs in, the icon of Remote
connection appears for 10 seconds on the task bar and disappears.
Looks like it's trying...
Check please if the script really should not be touched and provide some troubleshooting
steps.
Thanks!
INSTRUCTIONS from
the link:
http://www.concurrency.com/infrastru...rver-2012-rds/
"Unfortunately
Windows 7 clients are out of luck here. If you really want to use GPO to deploy
RemoteApps to Windows 7 clients, then you have to jump through a few
hoops.
Create a new GPO and under User ConfigurationPoliciesWindows
SettingsScripts, double click Logon and click the
Show Files
button. This will open an explorer window where you can copy files that will be
saved within this GPO. Download the
Install-RADCConnection.ps1 script from the TechNet gallery and
save it there. Also create a new Text file named something like feed.wcx,
open it in Notepad and paste in the following three lines of text:
<?xml
version=”1.0″ encoding=”utf-8″ standalone=”yes”?>
<workspace
name=”Enterprise Remote Access” xmlns=”http://schemas.microsoft.com/ts/2008/09/tswcx”xmlnss=”http://www.w3.org/2001/XMLSchema”>
<defaultFeed
url=”https://rds.domain.com/RDWeb/Feed/webfeed.aspx”
/>
</workspace>
Now select the PowerShell Scripts tab and
click the Add button.
Click Browse and select the .ps1 file and
for the parameters enter the name of the wcx file. Click OK twice and you are
ready to scope that policy to a set of users.
<#
.SYNOPSIS
Installs a connection in RemoteApp and Desktop Connections.
.DESCRIPTION
This script uses a RemoteApp and Desktop Connections bootstrap file(a .wcx file) to set up a connection in Windows 7 workstation. No user interaction is required.It sets up a connection only for the current user. Always run the script in the user's session.
The necessary credentials must be available either as domain credentials or as cached credentials on the local machine. (You can use Cmdkey.exe to cache the credentials.)
Error status information is saved in event log: (Applications and Services\Microsoft\Windows\RemoteApp and Desktop Connections).
.Parameter WCXPath
Specifies the path to the .wcx file
.Example
PS C:\> Install-RADCConnection.ps1 c:\test1\work_apps.wcx
Installs the connection in RemoteApp and Desktop Connections using information
in the specified .wcx file.
#>
Param(
[parameter(Mandatory=$true,Position=0)]
[string]
$WCXPath
function CheckForConnection
Param (
[parameter(Mandatory=$true,Position=0)]
[string]
$URL
[string] $connectionKey = ""
[bool] $found = $false
foreach ($connectionKey in get-item 'HKCU:\Software\Microsoft\Workspaces\Feeds\*' 2> $null)
if ( ($connectionKey | Get-ItemProperty -Name URL).URL -eq $URL)
$found = $true
break
return $found
# Process the bootstrap file
[string] $wcxExpanded = [System.Environment]::ExpandEnvironmentVariables($WCXPath)
[object[]] $wcxPathResults = @(Get-Item $wcxExpanded 2> $null)
if ($wcxPathResults.Count -eq 0)
Write-Host @"
The .wcx file could not be found.
exit(1)
if ($wcxPathResults.Count -gt 1)
Write-Host @"
Please specify a single .wcx file.
exit(1)
[string] $wcxFile = $wcxPathResults[0].FullName
[xml] $wcxXml = [string]::Join("", (Get-Content -LiteralPath $wcxFile))
[string] $connectionUrl = $wcxXml.workspace.defaultFeed.url
if (-not $connectionUrl)
Write-Host @"
The .wcx file is not valid.
exit(1)
if ((CheckForConnection $connectionUrl))
Write-Host @"
The connection in RemoteApp and Desktop Connections already exists.
exit(1)
Start-Process -FilePath rundll32.exe -ArgumentList 'tsworkspace,WorkspaceSilentSetup',$wcxFile -NoNewWindow -Wait
# check for the Connection in the registry
if ((CheckForConnection $connectionUrl))
Write-Host @"
Connection setup succeeded.
else
Write-Host @"
Connection setup failed.
Consult the event log for failure information:
(Applications and Services\Microsoft\Windows\RemoteApp and Desktop Connections).
exit(1)
--- When you hit a wrong note its the next note that makes it good or bad. --- Miles DavisUse GPP for this. Do not use a script. Post your issues in the GP forum.
You should also visit the RDS forum to get information on how to distribute remote app links.
¯\_(ツ)_/¯ -
How to see results for surveys in CIC Interaction record under script prfl?
Dear Experts,
In Interaction Record>Under Script tab> I have filled a survey-> upon entering all answers and saving->System showing a message, that survey has been sucessfully saved.
But I dont know where these surveys are getting stored. and I could not find the created survey or results next time when I opened the same Interaction record.
Kindly tell me where can we find the survey results, which is created under Script tab in Interaction Record.
Your suggestions will be highly appreciated
Best regards
Raghu ramHello,
Have you found solution to this case?
BR
Piotr -
How to use or call component in custom script expression
i want to use component in custom script expression .(custom script expression is located at :
when yow will click on one of the steps in criteria workflow
1)there is a tag named as event on clicking the event tag,there are two buttons named edit and clear on clicking edit.there is a screen having custom as a tag,on clicking that tag there is written custom script expression, here i hav to write a code to include a component).you can define code in a component (a service or an IDOC Include) that you can then call from the workflow "custom" tab.
So if your component has an include like this:
<@dynamichtml myInclude@>
<$do Some Stuff$>
<@end@>
Then in your workflow step event "custom" tab you can write:
<$include myInclude$>
The workflow event will then execute the <$do Some Stuff$> line.
With a service, you would define the service in your component then call <$executeService("MYService")$> in the step event custom code.
You cannot define includes or services in the custom script tab for workflow. -
Progress bar doesn't work if enableRedraw is false? Script UI
Hi,
I just noticed in Peter Kahrel's ScriptUI manual (version 2.0) this note:
"Note: in scripts that use progress bars, you cannot set
app.scriptPreferences.enableRedraw to false. If you do, the progress
bar doesn't display correctly. This is on Macs only."
Not having a Mac to test this on, I'm wondering what "doesn't display
correctly" actually involve?
Thanks,
ArielThanks Uwe.
Anyone who has a Mac and a spare moment, may I invite you to download
the demo of the "Create Character Styles" script on my website:
www.freelancebookdesign.com, under the "Scripting" tab.
It has a progress bar and enableRedraw = false (hence my interest in
this subject), and it never occurred to me to test it on a Mac.
If someone could test it on their Mac and tell me what happens, that
would be much appreciated.*
Ariel
Free license for the first person who lets me know! -
I'm trying to install sharepoint tools to users machines. This requires admin privledges. The script below is in a .bat files and installs the product no problems with admin rights. To be able to apply this to users when they log on is where I'm stuck.
Ive tried it as a computer startup script in GPO when the computer starts but it doesnt do anything. Its also hard to know as you cant see any messages.
Any suggestions?
script below:
setlocal
REM *********************************************************************
REM Environment customization begins here. Modify variables below.
REM *********************************************************************
REM Get ProductName from the Office product's core Setup.xml file, and then add "office14." as a prefix.
set ProductName=Office14.SharePointDesigner
REM Set DeployServer to a network-accessible location containing the Office source files.
set DeployServer=\\clientsource\clientSource\Sharepoint
REM Set ConfigFile to the configuration file to be used for deployment (required)
set ConfigFile=\\clientsource\clientSource\Sharepoint\SharePointDesigner.WW\config.xml
REM Set LogLocation to a central directory to collect log files.
set LogLocation=\\clientsource\clientsource\Sharepoint\log
REM *********************************************************************
REM Deployment code begins here. Do not modify anything below this line.
REM *********************************************************************
IF NOT "%ProgramFiles(x86)%"=="" (goto ARP64) else (goto ARP86)
REM Operating system is X64. Check for 32 bit Office in emulated Wow6432 uninstall key
:ARP64
reg query HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432NODE\Microsoft\Windows\CurrentVersion\Uninstall\%ProductName%
if NOT %errorlevel%==1 (goto End)
REM Check for 32 and 64 bit versions of Office 2010 in regular uninstall key.(Office 64bit would also appear here on a 64bit OS)
:ARP86
reg query HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\%ProductName%
if %errorlevel%==1 (goto DeployOffice) else (goto End)
REM If 1 returned, the product was not found. Run setup here.
:DeployOffice
start /wait %DeployServer%\setup.exe /config %ConfigFile%
echo %date% %time% Setup ended with error code %errorlevel%. >> %LogLocation%\%computername%.txt
REM If 0 or other was returned, the product was found or another error occurred. Do nothing.
:End
EndlocalHello,
Have you checked that the script is in a place where it can be run with the local system account of the computer the "default" location of the scripts is \\domain.com\SysVol\domain.com\scripts OR inside the Group Policy.
Have you checked that the Group policy / script are assigned to the right place (common mistake). If you assign COMPUTER-settings make sure the GP is assigned so that the test computer will get the policy (you can the rcop.msc or GPRESULT /h c:\pathherewhereyouwanttheraport.html
to make sure the computer really gets the right policy)
When you have created the group policy and selected: Computer Configuration, Windows settings, Scripts (Startup/Shutdown), Startup. On Scripts-tab selected ADD. please check that the information is
right
Script name: MyScript.bat
Script Parameters (the path where the script is located comes here): \\domain.com\SysVol\domain.com\Policies\{557740FF-AFAE-4300-9BD7-B90555FDA1BE}\Machine\Scripts\Startup -
Difference in using the same component made in mxml or action-script
Hi,
I made a sample project to show a kind of bug in the SuperTabNavigator component of FlexLib
In this sample you can see that using the same component (made in both mxml or action-script) can make a difference
I'm just wondering why ?
Thanks
Here is what i've posted :
What steps will reproduce the problem?
1. Create a button to dynamically add new tab with icon on a SuperTabNavigator
2. Click on this button to add new tabs
What is the expected output?
- The expected output is tabs added without abnormal behavior
What do you see instead?
- Every time a new tab is created the one who had the focus has its content
(icon + label) moving from the top-left of the tab to its original position
Please provide any additional information below.
Configuration:
- Flex Builder 3 in Eclipse
- FlexLib 2.3
Sample:
(see attached file)
There is two type of tab, one in action-script and one in mxml
They both are equal
- Adding a new action-script tab to SuperTabNavigator works fine
- Adding the same tab but an mxml one doesn't
- Adding a new action-script or mxml tab to TabNavigator works fine
-> meanings that the issue comes with SuperTabNavigator
- Adding a new mxml tab to both SuperTabNavigator and TabNavigator at the
same time makes TabNavigator to get the same bad behavior
Remarks:
- Tried everything but i'm really stuck
- Weirdly, removing the PopUpButton correct the issue
- In the same way if you keep adding action-script tab it automatically scroll to the
last tab. And if you do the same with mxml tab then it add the tab at the end and
scroll to the first one.
=> what could be the difference between using action-script or mxml object ?Here is one possible solution:
You can use the ExternalInterface (
http://livedocs.macromedia.com/flex/2/langref/flash/external/ExternalInterface.html)
class to communicate with JavaScript. JavaScript can then popup the
media player very easily like this:
http://www.webreference.com/programming/javascript/jf/column5/index.html
The documentation on the ExternalInterface class has a nice
example (in the bottom of the page) on how to communicate with
JavaScript in a browser. Hope this helps,
-george -
Anyone know how i can see the scripts for foreign languages? Thanks.
I'm learning Chinese with "Popup Chinese". When listening, if tab screen i can see the script, tab again script disappear.
on pre version
now
thanks -
Run commands in new tab in Terminal.app
hello, i want to know is there a way to run commands and these opens a new tab in terminal.app.
i know i can open a new tab with cmd+t , but i have a folder with hundreds of files with the name [email protected] and each file has the string ssh://username@server...
i use these folder in the dock like a bookmark of servers that i administrate, if i set that ssh default is the app iTerm.app then every of these file i execute opens in a new tab of iTerm, but if i set ssh default to Terminal.app for every file open a new windows of Terminal.
I would like to use Terminal.app if somebody help to find a way to open these conections in a new tab.
You can try to open the terminal.app, them in safari type ssh://localhost... and you see a new window of terminal.
Sorry for my bad english
Regards
Diego.I wonder if you're too tied to one solution. I do a very, very similar thing to what you're doing, except that I support 900 or so machines (I work for a hosting provider -- so, I'm not kidding.. promise!).
The basics of my setup are as such:
I have the host names of all the servers in a text file. In my .bash_profile I have a routine that loops through each server name and, if needed, generates a bash script named for the server in a directory I've set up in my path (~/bin/hosts). That file has the command string for ssh that I use to connect to the server in it. For example, for a server named 'foo', I'd have a file named '~/bin/hosts/foo', and the contents would look something like this:
ssh -X username@foo
This is the part I really like. I create each one as it's own bash script so that it can be found and indexed by spotlight, which I use as my app launcher. So, once each script has been created, all I have to do is cmd-space (to open spotlight) then type in the server name to continue. This works great except that it opens a new window every time. So annoying. As of today, though, I now have a new bash script:
tab ssh -x username@foo
A very small change, but with a huge effect. The other change is that I put the "tab" subroutine in a bash script in my path as well. So, now when it launches the ssh command it's in a new tab. Exactly as I wanted.
I'm hoping this will help you. Even if not, though, try to remember to keep an open mind. I know the "url" scheme you're using works well, but I actually prefer my way (of course.. I made it up ). Whichever way you go, I wish you the best of luck.
Cheers,
4 -
Is there a system table that stores the "create table" scripts
Does a Oracle system table exist that contains the "create table" scripts for tables defined under a schema?
I know I can build this with SQL by querying the user_tab_columns, but I was wondering whether the entire DML
statement is already stored in some other system table. In the Quest Toad software you can simply go to the "Schema Brower", "Tables",
then select the "Script" tab and it shows you the "create table" statement for the particular table that you are
looking at. I'm wondering whether Toad behind the scenes is building this "create table" script via the user_tab_columns
table or using another system table.
Thank you in advance,
Wesyou can use the DBMS_METADATA.GET_DDL procedure to obtain the details regarding the ddl statement used to create the table.
-
How to view the DDL script prior to object deployment in OWB 10g R2?
How to view the DDL script prior to object deployment in OWB 10g R2?
Here is what I' looking for: in 10gR2, let's say I've built dimension X, but it's not deployed yet. I've selected one of the deployment options, let's say: "Deploy to Catalog only". Now, I'd like to see a DDL script that will be executed at the deployment time. Where can I find this script? What screen? What menu?
Thanks,
vrViewing the Scripts
After you have generated scripts for your target objects, you can open the scripts and
view the code. Warehouse Builder generates the following types of scripts:
■ DDL scripts: Creates or drops database objects.
■ SQL*Loader control files: Extracts and transports data from file sources.
■ ABAP scripts: Extracts and loads data from SAP systems.
To view the generated scripts:
1. From the Generation Results window, select an object in the navigation tree on the
left of the Generation Results dialog.
2. Select the Scripts tab on the right of this dialog.
The Scripts tab contains a list of the generated scripts for the object you selected.
3. Select a specific script and click the View Code button.
Regards,
Marcos
Maybe you are looking for
-
Error while creating Transport role
Hi, I have created a new transport role - " Transport manager" but unfortunately the import function of that doens,t work. It gives Error: "Unexpected Error. See System log for more details...." In the NWA i see: ' ( ' com.sapportals.portal.transpo
-
Upgrade ASM instance database 10g to 11g
Hi, In my environment, I have ASM instance database 10.2.0.3 running on solaris 10 (64-bit), I need to upgrade to ASM instance 11.1.0.6 database. please guide me an overview of steps... thanks in advance
-
CO-PA Problem: Direct postings in FI JV's not Getting Updated in CO-PA
Hello All, I am facing a probelm in CO-PA, when we are posting a JV in FI With The Cost Object as Cost Center . now we are able to See a FI Document, a CO Document and a Profit Center Document. When i am going to CO-PA T.code KE24 i am not able to se
-
How to check plan line items for plan cost at network activity level?
Dear all, How to check plan line items for plan cost at network activity level? The plan cost is done in network activity in CJ20N. I am not able to check using CJI4 or CJI9 report. Kindly advise. Thanks and regards, Jessie
-
I download firefox and can open it once but cannot open it again.
I have to uninstall and reinstall it to open it again...