Re-start all jobs or re-start aborted jobs only?

In TDMS projects, sometimes we have to make a decision to re-start all jobs or re-start only aborted jobs.
We want to re-start only aborted jobs  to save time as long as no inconsistencies would be created therefrom.
Could you tell me is it always OK to restart only aborted jobs? If not, what can be used as the criteria?
Thanks!

Generally where ever the option is available it is recommended to start only the aborted jobs unless and until you are sure of possible inconsistencies.

Similar Messages

  • We are running 3 batches parallel(a.ksh,b.ksh,c.ksh parallel ) .if a.ksh will complete then d.ksh will start('d' start when 'a' will terminate successfully) and we have to handle error for all jobs ( if some job got aborted during runtime) ?

    we are running 3 batches parallel(a.ksh,b.ksh,c.ksh parallel ) .if a.ksh will complete then d.ksh will start('d' start when 'a' will terminate successfully) and we have to handle error for all jobs ( if some job got aborted during runtime) ?

    Moderator Action:
    You already asked this question, two days earlier.
    https://forums.oracle.com/thread/2585158
    Stay with your original post.   Deliberate multiple posting is the same as spamming the forums.
    This new post is locked.

  • In Linux, my firefox uses the /etc/firefox profile for all users, now I need ONE user only to start with their own profile, I'm struggling to achieve this, please help!

    In Linux, my firefox uses the /etc/firefox profile for all users, now I need ONE user only to start with their own profile, I'm struggling to achieve this, please help!

    .Jake. wrote:
    I forgot to say that the hard drive has not been used yet...
    So you have no backup of your data at all?
    Pete

  • Synchronization start/abort fetch by boolean control with postprocessing queue

    Hello dear colleagues!
    Thanks for your support, I ask you still to help to understand the following:
    How correctly to supervise on/off of Fetch function? (An example of that what I did already, please see the enclosed file).
    I.e. I explain conditions: it is necessary for me start/abort Fetch cycle on boolean control, i.e. then when it is necessary. 
    And one more condition I wish to adhere Fetch cycle at least approximately by 1st second (in my example and it turns out).
    Further, it agree my example, I consider quantity of second cycles and accordingly I understand, that Fetch have accepted so much that data for so much that seconds. Boolean control is in position true a certain interval, from 1st till 100 seconds.
    The postprocessing cycle (detecting of peaks) lags behind a fetch cycle for 1 second approximately.
    My example works, but it is not always correct (as it seems to me), i.e. sometimes fetch works once again than it is necessary, or on the contrary it is less.
    I consider, that where that in a code I have broken sequence Fetch and Abort. 
    I ask you to correct a code as consider it necessary (there it very little). 
    In other words, I need somehow programmatically to distinguish, that postprocessing of a current interval of gathering (from 1st till 100 seconds) stopped and to make by this criterion some actions. 
    I don't want to use any timers, there can be a turn/semaphores or new queue, etc. will help??
    Sorry for my English. Please, advise me.
    Message Edited by Current 93 on 11-17-2009 06:04 PM
    Attachments:
    8ch_I8_bool_control_reset_before_fetch.vi ‏43 KB

    There are numerous issues with this code.  Here are the things you can do to make it much better:
    The enqueue in the top loop needs to be inside the Waiting case.  It will feed empty packets to the analysis loop when waiting.  This is not good practice.
    You have not implemented a way to stop either loop.  The previous suggestion for the top loop would probably work for both, since closing the queue will cause the bottom loop to error and exit.
    Your code for "x+y" would be better handled with a shift register.  Better yet, simply wire it to the iteration terminal on one of the loops.  The bottom shift register on the top loop is a reimplementation of the iteration terminal output.
    You could use an event structure for handling changes in things like the channel.  However, this would complicate your code quite a bit, since it would require a state machine wrapper on your analysis code and another loop for the event structure.
    The implementation of "texp" makes the top while loop into a FOR loop.  If your LabVIEW version is new enough, consider using a FOR loop with a conditional terminal (abortable FOR loop).
    See what you can do and post your results.  If you get stuck, let us know.
    This account is no longer active. Contact ShadesOfGray for current posts and information.

  • T21 won't start on battery only. Starts OK with charger, which can then be disconnected!

    My Thinkpad T21 will not start on battery only. Indicators turn green (ventilator and disc try to run) for only less than a second and nothing more. If a charger/adapter is connected the machine starts OK, and then I even can disconnect the charger and continue to work. I only see a slight decrease in backlight intensity. This started after I connected a defective charger to the computer . I'm afraid some FET switch 'died'. I've found elsewhere suggestions to discharge a certain "overcharged capacitor" and tried it by disconnecting the battery and pressing the ON button continuously then repeatedly but without results. According to the service manual I should replace the main board, but before I do that I'm ready to benefit from my possibility to access SMD repair tools. I've nothing to loose.  Does anyone know the startup circuitry or point me to the possibly bad FET? Does anyone have the keyboard circuit or at least the connector's pin designations (or at the very least: which pins are wired to the POWER button)? Thanks, ANTIK

    Repeating my response to your thread at TPF in case you (or anyone else hasn't seen it):
    It does sound possible that one (or more) of the MOSFETs on the motherboard has died. As far as we know, there are no schematic diagrams publicly available for any Thinkpad. Assuming that you want/need to know the pinout designation for the keyboard connector in order to turn on the laptop without the keyboard attached, then you can use the simple port replicator (FRU 02K8668) to do that. Mount the laptop in the port replicator (without the keyboard) and you can then press the power button on the replicator to turn on the system. These port replicators are available on eBay, like this one:
    http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=350196508319
    There may be cheaper sources on eBay or locally.
    Ray Kawakami
    X22;X24;X31;X41;X41T;X60;X60s;X61s;X300;X301;Z60m;Z61t;Z61p;560Z;600E;600X;T21;T22;T23;T41;R50;A21p;A22p;A31 and A31p
    Not a Lenovo employee; just a volunteer helping out here
    All personal links to PC-Doctor software removed 8/2012 by mfg request

  • I have one itunes account with two phones. when i phone one of the numbers both phones have started to ring, only when connected to wifi at home. How do i resolve this please?

    I have one itunes account with two phones assigned to it, sons and daughters, (5s). When i phone one of the numbers both phones have started to ring, only when connected to wifi at home. The problem does not occur when not connected to wifi. How do i resolve this please? texting is fine it is only when ringing one of the numbers.

    <http://support.apple.com/kb/HT6337>
    "To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls."

  • How to identify all jobs that were running at a particular point in time?

    TES 6.1.0.391
    From time to time, we have a need to identify all jobs that were running at a particular moment in time on a particular agent (we have about 800 agents)...eg "what was running ("Active") at 09:03:42 a.m. two days ago on agent XYZ?"
    I've used other job schedulers, and have written queries to extract that info, but I thought before I work on one for Tidal that I would ask the community....how are you getting this info?
    Any help is greatly appreciated, thanks.

    I had some time over the weekend and was able to come up with something of use.
    Please note that our repository is MSSQL
    select jobmst_prntname as ParentJobName,
    a.jobmst_prntid as ParentJobId,
    a.jobmst_id as JobId,
    a.jobdtl_id as JobDetailID,
    jobmst_name as JobName,
    b.owner_name as JobOwnerName,
    c.jobdtl_cmd as JobCommand,
    c.jobdtl_params as JobParameters,
    jobmst_lstchgtm as LastUpdateDate,
    d.nodlstmst_name as AgentListName
    ,[jobrun_status]
    ,[jobrun_duration]
    ,[jobrun_time] as starttime
    ,DATEADD(ss,jobrun_duration, jobrun_time) as endtime
    ,f.nodmst_name as AgentName
    ,[jobrun_owner]
    ,[jobrun_cmd]
    ,[jobrun_rundt]
    ,[jobrun_batch]
    ,[jobrun_params]
    ,[jobrun_launchtm]
    ,[jobrun_fullpath]
    from Admiral..jobmst a,
    Admiral.dbo.[owner] b,
    Admiral.dbo.jobdtl c,
    Admiral.dbo.nodlstms d,
    Admiral.dbo.jobrun e,
    [Admiral].[dbo].[nodmst] f
    where a.jobmst_owner=b.owner_id
    and a.jobdtl_id=c.jobdtl_id
    and c.nodlstmst_id=d.nodlstmst_id
    and e.jobmst_id=a.jobmst_id
    and e.nodmst_id=f.nodmst_id
    and jobmst_active='Y' --This condition shows only the active jobs
    and jobrun_rundt ='2014-01-26' --This is the job run date. If the job finishes the next day, that is what is going to be used.
    and f.nodmst_name = 'abc' --This is where you input your agent name
    Hope this helps!

  • Trying to access hotmail account but it is taking forever to get into hotmail it was working ok at start of week only yesterday and today have a problem with it

    rying to access hotmail account but it is taking forever to get into hotmail it was working ok at start of week only yesterday and today have a problem with it

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • I have lost track of the number of websites that do not work properly on the iPad without Adobe Flash player which is unsupported. I cannot use retail sites, billing sites and most important of all job application sites. All are missing tabs, links, info

    I have lost track of the number of websites which do not work properly on my iPad. They include retail sites, billing sites and most important of all job application sites. They all seem to require Adobe Flash Player which cannot be downloaded onto an iPad. Skyfire does not solve the problem. They all load without vital parts of the site such as tabs, links and correct formatting. Any suggestions?

    Most such brower/service combinations have a difficult time working with Flash-based apps and often fail completely. Flash videos are usually the most successful content these browers can handle. You can try the others apps - Puffin, iSwifter, etc - but you may find that none of them work, in which case you will not be able to use your iPad with these sites other than by using one of the various remote control solutions to take over a computer running the full Flash Player.
    IMHO, any developer that built a Flash application for a billing or job application site was an idiot, but I know that's out of the control of anyone but the relevant company.
    Regards.

  • When I start Firefox, I only get the background of my browser in the Firefox window. I already reinstalled it, but that doesn't fix the problem.

    When I start Firefox, I only get the background of my browser in the Firefox window. I the normal window for 1 second, but then it changes in only the background window. So without toolbar, or navigation. I already reinstalled it, but that doesn't fix the problem.

    Try to disable hardware acceleration in Firefox.
    Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    https://hacks.mozilla.org/2010/09/hardware-acceleration/
    https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

  • HT201412 my phone restore but does not starts it shows only apple logo please help me

    HI
    My i phone restore but does not start it shows only apple logo & charging it was not connect to i tune please help me

    See your other post on this Topic...
    https://discussions.apple.com/message/22315227#22315227

  • How to export execution commands for all jobs in project?

    I would like to export the execution command line windows batch file and text paramater file for over 700 BODS Jobs in a Project folder.
    Is there a command line tool or BODS Utility to export execution commands for all jobs in a project?

    if you look at the command line most of the information is fixed like job server, port etc., the main thing that you need is the GUID of the job, that you can get from AL_LANG Repo table. You can write a script or a DS job to build this command line and write to a bat and txt file for each job

  • HT1725 Why does the download start again for the start. I only hve access to a 3G wifi connection so one tv episode had cost me about $10 I'm download costs because of several interruptions.

    Why does the download start again for the start. I only hve access to a 3G wifi connection so one tv episode had cost me about $10 I'm download costs because of several interruptions. Is there a way to change that?

    Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

  • Method to execute all jobs at a time

    Hi Experts,
    I have 100 jobs i want to execute all at a time,
    Any idea or suggestion,
    If we can do throught script ,Sample Script please
    Thanks
    Madhu

    Hi Madhu,
    You can execute all jobs using different method like through "Data Services management Console scheduling option" or through script (SHELL/BATCH).
    But here again you have to check the below points before executing all jobs
    Check the current server configuration because if you schedule all 100 job in one time it will put more load on server
    If you have dependency in jobs please run that jobs/schedule that jobs first.
    Please refer the below link for how to execute for LINUX or Windows
    Steps for executing BODS job from Unix Script with user defined global parameters
    http://scn.sap.com/community/data-services/blog/2013/09/02/steps-for-executing-bods-job-from-unix-script-with-user-defined-global-parameters
    SAP Data Services - Running & Scheduling Data Services Jobs from Linux Command Line using Third party Scheduler
    http://scn.sap.com/community/data-services/blog/2012/08/22/sap-bods--running-scheduling-bods-jobs-from-linux-command-line-using-third-party-scheduler
    http://www.dwbiconcepts.com/etl/23-etl-bods/39-one-stop-to-sap-bodibods.html?showall=1
    Thanks,
    Daya

  • When I open Mail the fans start up and only stop when I close it. This started about 2 days ago. In addition, Safari is often very very slow. What to do?

    When I open Mail the fans start up and only stop when Mail closes. This began two days ago.
    Previous to that I never had any problems with Mail; but Safari has been very slow on occasions. I don't know if the 2 pbs are linked.

    You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox Profile Folder that store session data.
    Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
    *Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
    *http://kb.mozillazine.org/Multiple_profile_files_created

Maybe you are looking for