Re: Upgrading  ebs 11i to r12 12.1.1 on Suse

We do not use OPM and gmfpostimportaad.sql is running for last 20 hrs.
I tried to stop this process as per the note Long Running Cstpostimportaad.sql while upgrade to R12.1.1 (Doc ID 1453612.1)/ Even that was taking long to stop. I had cancell it and tried to stop it again it is taking too long again.
Any help please.
Enter the worker number(s)/range(s) or 'all' for all workers,
or press [Return] to go back to the menu : 4
^C
AD Controller error:
The following ORACLE error:
ORA-01013: user requested cancel of current operation
occurred while executing the SQL statement:
UPDATE fnd_install_processes
SET status = 'F'
WHERE worker_id = 4
Review the messages above, then press [Return] to continue.
orker Code Context Filename Status
1 Run AutoPatch R120 pl Wait
2 Run AutoPatch R120 pl Wait
3 Run AutoPatch R120 pl Wait
4 Run AutoPatch R120 pl gmfpostimportaad.sql Running
Review the messages above, then press [Return] to continue.
AD Controller Menu
1. Show worker status
2. Tell worker to restart a failed job
3. Tell worker to quit
4. Tell manager that a worker failed its job
5. Tell manager that a worker acknowledges quit
6. Restart a worker on the current machine
7. Exit
Enter your choice [1] : 4
Enter the worker number(s)/range(s) or 'all' for all workers,
or press [Return] to go back to the menu : 4

Hi,
Please check the adworker 04 log file for more information, and verify the status.
Also please check the database log file and let us know of the status.
Thanks &
Best Regards,

Similar Messages

  • Upgrade EBS 11i To R12.2

    Hello ,
    I need help if you can send me notes , DOC   .... step by step how to upgrade EBS 11i to R12.2
    Thanks

    Hi,
    there are MOS notes and Whitepapers available.
    Note that there are some SLA upgrade jobs in the upgrade from 11i to Release 12.2.0, especially ... most current data is being upgraded.
    Best Practices for Minimizing Oracle EBS R12.2.n Upgrade Downtime Whitepaper
    regards

  • Upgrade from 11i to R12

    I am upgrading EBS 11i to R12. on RHEL5.4. I need Urgent help regarding this.
    When applying patch 7461070 (merged with 9179588 and 9477107) even i tried to apply in as a single patch even then i get the following error.
    FAILED: file adprod.odf on Worker 1.
    When i checked the log file it shows the following error:
    Comparing objects in username APPLSYS with ODF file
    /apps/oracle/apps/apps_st/appl/ad/12.0.0/patch/115/odf/adprod.odf
    Reading objects from ODF file
    Reading table FND_PRODUCT_DEPENDENCIES ...
    Reading table FND_PRODUCT_GROUPS ...
    Reading table FND_PRODUCT_INSTALLATIONS ...
    Reading table FND_MODULE_INSTALLATIONS ...
    *** Reading objects from APPLSYS schema
    Reading table FND_PRODUCT_DEPENDENCIES from APPLSYS schema ...
    Reading table FND_PRODUCT_GROUPS from APPLSYS schema ...
    Reading table FND_PRODUCT_INSTALLATIONS from APPLSYS schema ...
    Reading table FND_MODULE_INSTALLATIONS from APPLSYS schema ...
    AD Worker error:
    Error querying DBA_TAB/IND(APPLSYS,FND_PRODUCT_DEPENDENCIES)
    AD Worker error:
    Error calling aicdtabGetObjTablespace(FND_PRODUCT_DEPENDENCIES)
    Error calling aicdtabCheckIfStorParmsLegal(false,FND_PRODUCT_DEPENDENCIES,APPLSYS,true,0)
    AD Worker error:
    Unable to compare or correct tables or indexes or keys
    because of the error above

    Hi,
    When applying patch 7461070 (merged with 9179588 and 9477107) even i tried to apply in as a single patch even then i get the following error.
    FAILED: file adprod.odf on Worker 1.Can you reproduce the issue if you apply the patches individually?
    When i checked the log file it shows the following error:
    Comparing objects in username APPLSYS with ODF file
    /apps/oracle/apps/apps_st/appl/ad/12.0.0/patch/115/odf/adprod.odf
    Reading objects from ODF file
    Reading table FND_PRODUCT_DEPENDENCIES ...
    Reading table FND_PRODUCT_GROUPS ...
    Reading table FND_PRODUCT_INSTALLATIONS ...
    Reading table FND_MODULE_INSTALLATIONS ...
    *** Reading objects from APPLSYS schema
    Reading table FND_PRODUCT_DEPENDENCIES from APPLSYS schema ...
    Reading table FND_PRODUCT_GROUPS from APPLSYS schema ...
    Reading table FND_PRODUCT_INSTALLATIONS from APPLSYS schema ...
    Reading table FND_MODULE_INSTALLATIONS from APPLSYS schema ...
    AD Worker error:
    Error querying DBA_TAB/IND(APPLSYS,FND_PRODUCT_DEPENDENCIES)
    AD Worker error:
    Error calling aicdtabGetObjTablespace(FND_PRODUCT_DEPENDENCIES)
    Error calling aicdtabCheckIfStorParmsLegal(false,FND_PRODUCT_DEPENDENCIES,APPLSYS,true,0)
    AD Worker error:
    Unable to compare or correct tables or indexes or keys
    because of the error aboveNo similar issues are reported in MOS (except for 987711.1 and 271300.1 which I believe are not applicable), so please log a SR.
    Thanks,
    Hussein

  • Upgrade from 11i to R12 - Custom Forms,Reports and Workflows

    Dear Community Friends,
    We are planning for upgrade from oracle apps 11.5.10.2 to R12.
    We have custom Forms,Form Libraries,Reports and Workflows.
    Kindly provide me for approach on how to migrate Custom form libraries,reports and Workflows.
    I beleive, this thread will exists as one shot point for custom forms,reports,workflow upgradation from 11i to r12 with detailed steps.
    I know that many links exists here in the forum for all the above objects mentioned,but still from all those i am able to get a clear picture for oracle forms but not for custom form libraries ,reports and workflows.
    Also,this post will provide a low level,practical picture of the steps for those who are in line with this.
    Links i have read for all these in our forum are:
    For Custom Forms,
    Re: Planning to upgrade from 11i to R12
    Re: Custom forms: After upgrading 11i to R12
    ofcourse,'n' number of links exists providing metalink notes also.
    Hussain,Helios and some others also has given many updates regd this.
    For custom workflow upgradation,
    Upgrade Workflow 11i to R12
    Workflow Upgrade
    Workflow Upgrade
    For reports,links mentioned the below metalink notes:
    Do Not Compile EBS R12 Reports Using rwconverter.sh or Reports Builder from IDS 10gR2 [ID 786794.1]
    Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
    Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
    Please correct me,if i am wrong.
    1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
    2) Open the forms using Forms Developer 10G and connect to DB
    3) Compile by clicking compilein Forms Developer and then save it.
    4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
    5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
    this will generate the .fmx's.
    frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
    Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
    6) Open the form and check in R12 instance
    As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)
    Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
    As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
    Some says that reports should be converted to XML published as reports does not exists in R12.
    So,i am not clear on this.
    Thanks,
    Ganesh
    [email protected]

    Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
    Please correct me,if i am wrong.
    1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
    2) Open the forms using Forms Developer 10G and connect to DB
    3) Compile by clicking compilein Forms Developer and then save it.
    4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
    5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
    this will generate the .fmx's.
    frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
    Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
    6) Open the form and check in R12 instance
    As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)You are right, and the steps mentioned above should be sufficient.
    Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
    As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
    Some says that reports should be converted to XML published as reports does not exists in R12.
    So,i am not clear on this.You can still use RDF files in R12, and just follow the approach you mentioned above, and you do not have to migrate them to XML publisher (though it is recommended, but this can be done after the upgrade as an enhancement task).
    For custom workflow, you need also to do the same thing, open them using workflow builder and make sure they work in R12 (correct the code if required and save them again in R12 once they work properly).
    Thanks,
    Hussein

  • Recommended migration path from Oracle EBS 11i to R12

    I need to migrate full EBS version 11i from AIX 5.2 platform to R12 Linux on Fujitsu simens platform . How could I perform it kindly suggest.?

    user1067720 wrote:
    I need to migrate full EBS version 11i from AIX 5.2 platform to R12 Linux on Fujitsu simens platform . How could I perform it kindly suggest.?
    I believe the best approach would be:
    1. Migrate your existing database ONLY to the new servers.
    Using Oracle EBS with a Split Configuration Database Tier on 11gR2 (Doc ID 946413.1)
    Export/import notes on Applications 11i Database 11g (Doc ID 557738.1)
    New Source Databases Added for Transportable Tablespaces + EBS 11i
    https://blogs.oracle.com/stevenChan/entry/new_source_databases_added_for
    2. Lay down R12 software on the new servers and Upgrade from 11i to R12:
    Oracle E-Business Suite Installation Guide Using Rapid Install
    http://docs.oracle.com/cd/E18727_01/doc.121/e12842/toc.htm
    Oracle E-Business Suite Upgrade Guide Release 11i to 12.1
    http://docs.oracle.com/cd/E18727_01/doc.121/e16342/toc.htm
    Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 (Doc ID 761566.1)
    Oracle E-Business Suite Upgrades and Platform Migration (Doc ID 1377213.1)
    Database Preparation Guidelines for an E-Business Suite Release 12.1 Upgrade (Doc ID 761570.1)
    3. Upgrade to 12.1.3
    Oracle E-Business Suite Release 12.1.3 Now Available
    https://blogs.oracle.com/stevenChan/entry/ebs_1213_available
    Thanks,
    Hussein

  • File- Export not working after upgrade from 11i to R12

    Hi,
    File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
    If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
    Thanks and Regards,
    Jagadeesha

    Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
    In Argument 0 - Type: Integer Value: 196613
    In Argument 1 - Type: Number Value: 54
    Out Argument 0 - Type: String Value: 12
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Entering app_menu.set_prop.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing FIND_MENU_ITEM Built-in:
    In Argument 0 - Type: String Value: FILE.EXPORT
    Out Argument 0 - Type: Integer Value: 19
    Executing GET_MENU_ITEM_PROPERTY Built-in:
    In Argument 0 - Type: Integer Value: 19
    In Argument 1 - Type: Number Value: 79
    Out Argument 0 - Type: String Value: TRUE
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_menu.set_prop.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
    Out Argument 0 - Type: String Value: NORMAL
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
    Out Argument 0 - Type: String Value: NORMAL
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: NULL
    In Argument 1 - Type: String Value: GLOBAL.OUT
    Executing USER_EXIT Built-in:
    In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
    FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
    FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.OUT
    Out Argument 0 - Type: String Value: N
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_form
    Out Argument 0 - Type: String Value: FNDCPVCM
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_block
    Out Argument 0 - Type: String Value: MASTER
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_form
    Out Argument 0 - Type: String Value: FNDCPVCM
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_block
    Out Argument 0 - Type: String Value: MASTER
    Executing GET_APPLICATION_PROPERTY Built-in:
    In Argument 0 - Type: Number Value: 75
    Out Argument 0 - Type: String Value: IHR40P
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
    FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
    FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
    # 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
    WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
    # 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
    WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

  • Inventory Module Upgrade from 11i to R12 - How to Copy Inventory Orgs.

    Hi All,
    We are working on R12 Upgrade project for Item Conversion.
    Requirement is to upgrade and bring all the Item setup and data from 11i to R12.
    As part of setup requirement, there are around 1900 Inventory Orgs in 11i instance. Please let me know what is the best approach / strategy to copy and bring over the 1900 Inventory Orgs.including the Master Org from 11i to R12.
    Your inputs will be highly appreciated.
    Thanks in Advance !
    Regards,
    Nityanand.

    Reporting Set of Books (MRC) in 11i is called as Alternate Currency Ledgers (ALC Ledger) in R12.
    After 11i upgrade, the reporting SOBs (MRCs) will be automatically changed to ALCs in R12.
    Some are primary and some are used as reportingI hope you are talking about MRCs.
    When we upgrade from 11i to r12, all the SOBs would be created as primary ledgers (as per oracle)If they are not MRCs and it is getting upgraded as primay ledger, you may create new ALC for your requirement.
    In that case you may need a datafix from Oracle to fix the old data.
    By
    Vamsi

  • Upgrade from 11i to r12 application servers with Discoverer 10g

    Hello, one and all.
    I have recently upgraded from 11i to r12 Oracle financial application server, after much patching and testing we finally came to the Discoverer application server.
    Most workbooks open fine, however it seems that some of them (about 3%) reference columns that no longer exist in r12, for example, SET_Of_BOOKS_ID has become LEDGER_ID in r12 on the gl.gl_je_lines table.
    This causes any workbook that references that business area to return an error 'Database Error - ORA-00904: " O974567"."SET_OF_BOOKS_ID": invalid identifier.
    Well and good; I think that that's caused by the EUL not being refreshed after the upgrade, so I go to the Discoverer administrator and refresh the general ledger Business area. This unfortunately renames several objects inside the business area, including SET_OF_BOOKS_ID to LEDGER_ID, so instead of that error, we now get several 'Missing item or condition' errors until the workbook will not open at all with an 'Item dependency "" not found in the EUL.' error. This i assume is because the workbooks still reference the old items.
    I'm guessing that several Business areas and objects therein have been renamed since nearly none of the workbooks will open now. I have restored the EUL from a backup (imported all the *.eex files) however I was wondering if anyone had faced this issue.
    I apologize as I have very little understanding of Discoverer and this might be a simple fix, but I'm at this point willing to try anything for help.
    Thanks!

    user8612301 wrote:
    Hi Srini
    Srini,
    To understand your above reply,
    You say that
    1) If they are based on 11i Discoverer EUL and Folders then export EUL And WorkBooks and Import them
    into R12 Discoverer Environment..Refresh the EUL..So ORACLE will take care of the changes like 11i SOB vs R12 Ledegrs??Pl open a SR with Support on what to do with seeded EUL as part of this upgrade - I suspect you will need to import the R12 EUL as part of this upgrade.
    >
    2) If they are Custom SQL reports from 11i then just RECREATE them from SCRATCH..Correct - after you verify that they are changed to reflect the R12 data model
    >
    Am I right?
    thanks
    kp
    Edited by: user8612301 on Apr 20, 2011 8:57 AMSrini

  • Issue with VO extension after upgrading from 11i to R12

    Hi All,
    We are facing issue with VO extension after upgrading from 11i to R12(12.1.3).
    Most of the cases we are facing issue as given below,
    oracle.apps.fnd.framework.OAException: oracle.jbo.AttributeLoadException: JBO-27022: Failed to load value at index 21 with java object of type java.lang.Boolean due to java.sql.SQLException.
    Please help me out to resolve this issue.
    Any help/suggestion will highly appreciate.
    Thanks & Regards,
    Sunita

    Hi Gyan,
    Thanks for the response.
    There is one attribute has added in VO query.
    In VO.xml file ViewAttribute definition is as given below,
    <ViewAttribute
    Name="DisplayApproveButton"
    IsUpdateable="false"
    IsQueriable="true"
    IsPersistent="false"
    Type="java.lang.Boolean"
    ColumnType="NUMBER"
    AliasName="DisplayApproveButton"
    Expression="xxh_invoice_approval_pkg.check approval(invoice_id)"
    SQLType="BIT" >
    </ViewAttribute>
    Thanks & Regards,
    Sunita

  • EBS upgrade from 11i to R12 using Maintenance Wizard question

    I have installed Maintenance Wizard in development envrionment. I picked module to upgrade 11i to R12. When I am defining the node it not only picked up 11i nodes but required me to configure R12 nodes. So Do I have to to create upgrade file system(for R12) and then configured R12 nodes in Define nodes? My configuration is in In configuration at this time as I did not configured R12 nodes.
    Please help me resolve this issue.

    My question is which database oracle_home we have to consider to upgrade R12? and What about another one oracle_home?
    When you run Rapid Install, provide the details of the already upgraded/installed 11.2.0.3 ORACLE_HOME.
    For 11gR1 ORACLE_HOME which is installed by Rapid Install, please see (How to upgrade Oracle E-Business Suite from 11i to 12.1.1 and keep the existing 10g Database? (Doc ID 1345020.1)).
    Thanks,
    Hussein

  • Business Folder Upgrade from 11i to R12

    Hi,
    We are upgrading from 11.5.10.2 to R12.
    In the process, we have to upgrade discoverer folder also.
    To undergo the change, we are testing one report from 11i to R12.
    The report has the business folder as po_vendors in 11i, which is taking data from PO_VENDORS table from PO schema.
    As the PO_VENDORS table is obselete in R12.
    We are trying to change the PO_VENDORS table to AP_SUPPLIERS table and we are changing schema from PO to AP.
    We were able to do that in Disco Admin, but when I run the report from Desktop, we are not able to get the data.
    Where in SQLInspector we can that the query is changed, one more interesting thing is when we run the query from backend for exact set of parameters, its returning data.
    Is there anything which we need to take care, are we doing anything wrong.
    Please help.
    Thanks,
    S

    Hi,
    We are using 3 views and a materialized view.
    Object names are
    1) AP_INVOICES
    2) AP_INVOICES_DISTRIBUTIONS
    3) AP_SUPPLIERS
    now when we change the views to base tables for e.g. AP_INVOICES to AP_INVOICES_ALL and AP_INVOICES_DISTRIBUTIONS to AP_INVOICES_DISTRIBUTIONS_ALL then our report is givng data.
    PFB the query.
    SELECT DISTINCT o215482.SEGMENT2 as E215623,o215482.SEGMENT2_DESCRIPTION as E215625,o215476.ATTRIBUTE5 as E216133,o215482.SEGMENT4 as E216142,o215482.SEGMENT1 as E216190,o215482.SEGMENT3 as E216208,o215482.SEGMENT3_DESCRIPTION as E216210,o215476.INVOICE_DATE as E216817,o215476.PAYMENT_STATUS_FLAG as E217125,o215473.PERIOD_NAME as E217133,o215487.VENDOR_NAME as E217379,o215487.SEGMENT1 as E217385,(SUBSTR(o215476.INVOICE_NUM,1,12)) as E217632,as215592_217133_OLD as as215592_217133_OLD,o215473.AMOUNT as E215705,NVL(o215476.INVOICE_AMOUNT,0) as E216800
    FROM APPS.AP_INVOICE_DISTRIBUTIONS o215473,
    APPS.AP_INVOICES o215476,
    APPS.JS_GL_CODE_COMBINATIONS_MV o215482,
    AP.AP_SUPPLIERS o215487,
    ( SELECT o215509.PERIOD_NAME AS as215592_217133_OLD_2, MAX(o215509.START_DATE) AS as215592_217133_OLD FROM ( SELECT gl.period_name ,gl.start_date ,gl.end_date ,gl.period_set_name FROM gl.gl_periods gl ) o215509 WHERE (o215509.PERIOD_SET_NAME = 'JS_GL_Calendar') GROUP BY o215509.PERIOD_NAME)
    WHERE ( (o215476.INVOICE_ID = o215473.INVOICE_ID)
    and (o215482.CODE_COMBINATION_ID = o215473.DIST_CODE_COMBINATION_ID)
    and (o215487.VENDOR_ID = o215476.VENDOR_ID)
    and (o215473.PERIOD_NAME = as215592_217133_OLD_2(+)))
    AND (o215482.SEGMENT6 LIKE :"Project Parameter 1")
    AND (o215482.SEGMENT5 LIKE :"Category Code Parameter 1")
    AND (o215482.SEGMENT4 LIKE :"Business Unit Parameter 1")
    AND (o215482.SEGMENT3 LIKE :"Cost Centre Parameter 1")
    AND (o215482.SEGMENT2 LIKE :"Account Parameter 1")
    AND (o215482.SEGMENT1 LIKE :"Company Parameter 1")
    AND (o215473.PERIOD_NAME LIKE :"Period Name Parameter 1")
    AND (o215487.SEGMENT1 LIKE :"Supplier Number Parameter 1")
    AND (o215476.CANCELLED_DATE IS NULL )
    AND ( ( UPPER(o215473.LINE_TYPE_LOOKUP_CODE) = UPPER('ITEM') OR UPPER(o215473.LINE_TYPE_LOOKUP_CODE) = UPPER('FREIGHT') ) )
    ORDER BY o215482.SEGMENT1 ASC , o215482.SEGMENT3 ASC , o215482.SEGMENT2 ASC , o215482.SEGMENT4 ASC , o215487.SEGMENT1 ASC , o215487.VENDOR_NAME ASC , (SUBSTR(o215476.INVOICE_NUM,1,12)) ASC ;
    Kindly help.
    Thanks,
    S

  • Upgrade Workflow 11i to R12

    Hi:
    We have begun an 11i to R12.1.3 upgrade, and I want to understand how workflows get upgraded.
    1. Will customizations to seeded workflow processes, such as account generating processes, survive an upgrade or will we have to reapply the customization?
    2. Will new processes within a seeded workflow survive an upgrade?
    3. Will custom workflow items/processes survive an upgrade?
    Any help/ideas/suggestions are greatly appreciated.
    Thanks.

    Customizations will be lost if the workflow process code is changed/replaced by the upgrade process, and you will have to re-apply the customization then (this may not be the case if no changes are required on those workflow processes).
    The best practice is to try this upgrade on a TEST instance first and verify/validate all your seeded workflow files which has customization and see if any additional steps are required.
    Thanks,
    Hussein

  • Issue with Supplier site descriptive flex field upgrade from 11i to R12

    We ran into some issue when upgrade Supplier site descriptive flex field from 11i to R12.
    In 11i. we defined descriptive field on JG_PO_VENDOR_SITES. in the segment definition, we defined one of the attributes default value based on Form Field Value, and the statement is like this:
    SELECT decode(:SITE.COUNTRY,'IT','AP ITALIAN TRANSACTIONS','AP AUTOFATTURA') FROM dual
    All above worked fine in 11i, whenever the flexfield field is open in forms, the default valuse shows based on the real-time value in :SITE.COUNTRY.
    In R12, Supplier site management is in HTML format. There is no forms, which means no form value. Do you have an alternative soluction for implement the same logic in R12?
    Thank you and regards,
    Kate
    Edited by: user12100435 on Feb 12, 2013 9:06 AM

    Kate,
    Have you logged a SR and see if Oracle support can help?
    Thanks,
    Hussein

  • EBS 11i and R12 AppsDBA

    Hi Friends,
    As Apps DBA in your company, can you share me how do u managed your EBS 11i/R12
    Production systems please. What are the basic daily activity that I should be doing so that I will not encounter problems with the system and make the system run smoothly day by day.
    Thanks a lot

    Hi Again :)
    I found some AppsDBA Responsibilities in Google, Is this a good one? Or lacking of somethings.
    Thanks
    =====================
    Oracle Applications Administration
    Scope of Work
    Check Existing Components and Architecture of Oracle Applications
    Check/Validate Existing Backup Procedure
    Servicing User Requests-Oracle Applications Components
    * Client
    * Web Node
    * Forms Node
    * Concurrent Processing Node
    * Admin Node
    * Database Node
    * Oracle Applications Architecture
    Check Existing Oracle Applications Configuration
    * Application Context File
    * Port Numbering Convention
    * Identifying Nodes with Context Parameters
    * AD Configuration
    * Reviewing adconfig.sh Log Files
    * Reviewing adconfig.sh Execution Changes
    * Check adconfig.sh Backup Files
    * Web Node Configuration
    * Apache Configuration Files
    * JServ Configuration Files
    * Forms Node Configuration
    * Forms Metric Server and Forms Metric Client
    * Concurrent Processing Node Configuration
    * Report Review Agent (FNDFS)
    * Admin Node Configuration
    * Application Environment Files
    * Identity.obj File
    * Database Connection File
    * Generic Service Monitorment
    * TCF Socket
    * Discoverer Server
    * Fulfillment Server
    Check Existing Database Node Configuration
    * Reviewing Database Initialization Parameters
    * Database Network Configuration
    * Review Oracle Applications Tablespace Model
    * Custom Database Objects
    * License Monitorr
    * Password Security
    MONTHLY ACTIVITY
    Oracle Applications Monitoring
    * Monitor Database Log Files
    * Monitor Database Availability
    * Monitor Sessions
    * MonitorStorage
    * MonApache Server Monitoring
    * Apache Log Files
    * Apache Availability
    * Troubleshooting iAS Configuration
    * Testing Java Servlet Configuration
    * Monitoring the JVM Pool
    * Forms Monitoring and Troubleshooting
    * Using OAM
    * Monitoring Forms Dump Files
    * Concurrent Monitorr Monitoring
    * Monitoring Concurrent Monitorr Log Files
    * Reviewing Active Concurrent Requests
    * Monitoring Pending Concurrent Requests
    * Canceling Active Concurrent Requests
    * Monitoring Concurrent Request Run Times
    * Server Availability
    * Server CPU Utilization
    * Server Memory Utilization
    * Server Filesystem Usage
    * Network Monitoring
    * Using ping and tracert for Network Monitoring
    * Performing a Network Test from the Application
    * Additional Monitoring and Troubleshooting Topics
    * Monitoring Profile Changes
    * Monitoring System Backups
    * Resolving JInitiator Issues
    * Identifying Performance Issues
    * Developing an Action Plan
    * Tools for Resolving Performance Issues
    * Tuning the Database
    * Tuning the Server
    * Tuning the Application Tier
    * User Tuning
    * Trace Files
    Perform Applications Patching
    * Check Application Patch Availability
    * Apply Patches
    * Monitoring and Resolving Patching Problems
    * Perform Post-Patching activity
    * Perform Patching Cleanup
    * Perform Database Patching
    Oracle Applications Utilities and Maintenance
    * Application Component Startup and Shutdown Scripts
    * Finding and Removing Memory Segments and Semaphores Error
    * Finding and Removing Print Jobs Error
    * Finding and Removing Runaway Database Sessions
    * Scheduling Scripts
    * Using crontab
    * Scheduling and Monitoring Tools
    * Preventative Maintenance
    * Gathering Statistics
    * Recompiling Invalid Objects
    * Rotating Log Files
    * Rebuilding Indexes
    * Stopping and Restarting the Apache Server
    * Purging Concurrent Requests
    * Purging Workflow History
    * Purging and Archiving Data
    End of File :)

  • Upgrade EBS 11i(10.2.0.5) on HPUX to EBS R12(11.2.0.3) on linux

    We have EBS 11.5.10.2 on HPUX with 10.2.0.5 database.We want to migrate and upgrade it to EBS 12.1.3 with 11.2.0.3 database.
    We also have 10.1.4.3 SSO.
    Our approach is:
    First Phase:
    1) From source(HPUX) take export(expdp) backup of 10g database.
    2) Install 11.2.0.3 database on Target ie,on Linux server.
    3) Import database on target 11g database.
    4) Link 11g(Linux) database with 11i(HPUX) application
    5) Re-Integrate SSO with 11g database.
    Second Phase:
    1)Pre upgrade steps on 11g database(linux)
    2)Install file system of EBS 12.1.1 on linux with upgrade.
    3) Upgarde steps
    4) Post upgarde steps.
    Is it feasible? Please suggest.
    Edited by: user13605085 on Feb 16, 2013 11:22 AM
    Edited by: user13605085 on Feb 16, 2013 11:23 AM

    1) Is expdp/impdp is better than transaportable tablespace?I have been using export/import for long time and never had issues with it. The transportable tablespace is a new concept and it became certified with 11i/R12 not long time ago.
    2) We also want to change the characterset on target database from US7ASCII to UTF8/ AL32UTF8/ AL16UTF16 to support multiple languages.We are planning to manually change the script created by expdp utility as per the doc 557738.1.So,is it work in our case or should we follow some other steps to change the characterset?It should be OK. However, I would suggest you log a SR and confirm the same with Oracle support -- Changing the NLS_CHARACTERSET to AL32UTF8 / UTF8 (Unicode) [ID 260192.1]
    3) What should be the characterset to support multiple languages.Which one is best in UTF8/ AL32UTF8/ AL16UTF16?AL32UTF8
    Globalization Guide for Oracle Applications Release 12 [ID 393861.1]
    http://docs.oracle.com/cd/E18727_01/doc.121/e12842/T422699i4783.htm#4527815
    4) As in my first phase i will deregister the 10g SSO from 10gdatabase and register it with 11g database?So,should it work.If yes,then how to de-register and register the SSO?
    5)How to migrate the 10g SSO from hpux to linux?Cloning SSO-Enabled Environments in E-Business Suite [ID 1123843.1]
    Integrating Oracle E-Business Suite Release 11i with Oracle Internet Directory and Oracle Single Sign-On [ID 261914.1]
    Thanks,
    Hussein

Maybe you are looking for