Re: using install discs on g5 to update g4
Hello,
I have just purchased a new intel macbook 2ghz. I love it. It came with install discs for 10.4.7
Is is possible to take my old g4 which runs an older version os 10 and update it to 10.4.7 with these discs or does apple put some kind of protection on their install discs for this reason. Thanks in advance.
M
First,install disks are machine specific.
Second,Those disks are from an Intel machine not a PPC machine
Third,installing a single copy of OS X on two machines at the same time is piracy.
Jim
PowerBook G3 500 Mhz "Pismo" (Wonna buy it so I can get a MacBook?) Mac OS X (10.4.7)
Similar Messages
-
Can I use install discs (Snow Leopard) from MBPro to upgrade desktop?
I'm having issues with my iMac (mid 2007) which has been upgraded to Leopard so far (when Leopard came out). I have Snow Leopard discs that came with my Mac Book Pro. If I do a clean install of my iMac, can I use the Snow Leopard discs to do the new install? What worries me is that the discs specifically say "13 inch MacBook Pro" Mac OSX Install DVD. Does this mean I can't use them on my desktop? Are their install discs specifically for laptops vs desktops?
Nancy Alineri wrote:
I'm having issues with my iMac (mid 2007) which has been upgraded to Leopard so far (when Leopard came out). I have Snow Leopard discs that came with my Mac Book Pro. If I do a clean install of my iMac, can I use the Snow Leopard discs to do the new install? What worries me is that the discs specifically say "13 inch MacBook Pro" Mac OSX Install DVD. Does this mean I can't use them on my desktop? Are their install discs specifically for laptops vs desktops?
You can not use the disks intended for the MBP on your iMac. Buy a retail copy of SL ($29) or contact Apple for a replacement of the original disks for the iMac. -
Reset password using install disc
I haven't used my iMac for years and now want to pass it on to my son.
I don't remember my administrator password. When I start up using the install disc and go to Reset Password only the install disc is displayed.
What do I need to do to get the hard drive Macintosh HD to display so that I can reset my password on it?
Thanks. Jay.There are situations where that utility will not work, such as if there more than on admin account or if the current admin account is NOT the original admin account. Also, it may not work if the currently installed Mac OS X system is not the version on that installation disc.
Wouldn't it be better if you just use that install disc to run Disk Utility, erase the internal drive, and installed a fresh system? -
Partitioned iMac 27, Sept. 2010. Verify disc on HD2 says "corrupted, needs repair," unspecified. "Use install disc to repair." HD2 is isolated from Internet since birth. HD 10.6.8, but HD2 is still 10.6.3. Can I use the original 10.6.3 install disc to start, and then go to the side needing repair, without a problem?
Part 2: After 4 years, suddenly when HD2 is revived from sleep, it makes an Internet connection, all settings are the same, Network shows Ethernet is unplugged, but the indicator from modem shows connection. Maybe connected to first part of my question, but maybe not.
Thank you.Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive? -
IMac won't start without install disc
Hi, I'm new to all of this. I tried resetting my admin password using install disc on my iMac as I'd forgotten it. Now iMac won't start without disc. If disc is ejected on restart apple logo flashes between no entry sign and folder with "?" on it. Will start up with install disc in, but then wants me to choose language and install OS. Tried repairing and verifying HD and all seems ok. Tried holding option key and selecting HD on startup, but same outcome - choose language and install OS. How do I get back to normal desk top? Do I have to install OS again? Will I lose data? Please, please help! Thanks.
It should only take a minute or so at most to boot from the DVD.
If your sure you have the correct Install Disk for that iMac, I'd start over. Then if it still doesn't work then perhaps a trip to your Local Apple Service Provider with the Disk or Disk and iMac is in order.
http://www.apple.com/buy/locator/service/
Alternately using the correct Disk as per the following article, see if you can run the Apple Hardware Test? > http://support.apple.com/kb/HT1509 -
have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!
The configure bar gets about an 1/8 full and then just does nothing. I think its lists the update as combo update? cant remember with out checking.
I have tried to do the disk verify and repair but this has made no difference.
Please let me know what i need to do, I have reformatted the mac just to start over as was clogged with a lot of useless data, I had installed lion (10.7) from the app store previously and now cant seem to find a way to re install lion. I hope I dont need to pay for it again?If you erased your hard drive, you'll need to reinstll OS X 10.6 Snow Leopard to access the App store. You won't have to pay for OS X 10.7 Lion again. Did you try booting to the recovery partition by holding the command and r keys down? If that's still there, you can reinstall OS X 10.7 from there.
If you're looking to install the current iTunes, you need OS X 10.6.8 at a minimum.
If you're still trying to update OS X 10.5 Leopard, you can download the combo update from here. Download, use Disk Utility to repair permissions, apply the update, then repair permissions again. That will take you to OS X 10.5.8. -
I've been having all manner of issues with my system, seemingly out of the blue. I just had a third party install a new HDD for me, and I used my snow leopard install disc (the one I bought many years ago, right after it launched), and when I tried to run the software update and install four updates all together, I got a notice that the file didn't download properly and may be corrupted. I'm wondering if this could have caused my system crash after the last clean install.
I'm downloading manually instead of using whatever is in software update just to be safe this time, but I was wondering if anyone had a similar experience?It's interesting that you were connected via ethernet yet still had a similar issue. I wonder if perhaps our hardware issues that prompted the clean install may have been similar?
When I attempted to run software update again, it seemed to think that it had completed the download for the 10.6.8.v1.1 update, even though it listed it at over 1Gig, and had "completed" after mere seconds. I know my wifi setup isn't THAT good, and even if it were, I've never seen a wireless connection allow for download speeds of that magnitude.
I wonder if there is something missing from the original install discs that causes trouble with network connectivity? This is conjecture, I really don't have a solid working knowledge of the Mac OS X network tools. When i downloaded the intaller package from the website it seemed to resolve all my issues.
My clean install was done on a brand new HDD with a new partition, my unit seems to be functioning normally (for) now. Fingers crossed...I'm a teacher and my system crashed the day before labour day, taking with it a LOT of things I had prepared, and not backed up due to my foolish weekly backup schedule on Time Machine.
Thanks all for the suggestions and the help, interesting things to discuss! -
Update HD partition w/o install disc ?
Hi, if I understand correctly you want to migrate data & such from 10.4.11 to 10.5.8?
If so boot from the 10.5.8 partition, Open Applications>Utilities>Migration Assistant & run that. -
Creating a bootable Lion install disc/disk and using it
Hi all,
Below is a copy of a method ds store posted for creating a bootable Lion install disc. Some questions:
1. Is this a polished final version of the process, or are there other steps which could/should be added?
2. Are there any disadvantages to going this route instead of installing directly onto a Mac?
3. After creating a Lion install disc/disk via this method and using this saved dmg to install Lion on a Mac, will it set up the Mac exactly the same way it would by downloading/installing directly from the Apple Store (sounds like a "duh" question, but nothing would surprise me with Lion)?
4. Exact size of this dmg (in case I want to use a flash drive instead)?
I have been avoiding Lion, hoping it would shape up. I'm still not satisfied and will not run it on my main machines. (Of course ymmv; I'm not looking to be talked into or out of using Lion.) However, I am ******* (hmmm, I guess l-u-s-t-i-n-g is a bad word!) over a new Mac Mini, which will have Lion installed, with no chance of running SL on it due to the new hardware revision. Thus, I'm either going to have to make peace with Lion or forget about a new Mini. I guess I'll have to give Lion a try, but I still don't want to actually run it on any of my machines; thus, I want to run it from an external drive, playing with it as I have time/desire, leading to more questions.
5. Using the install disc/disk created above, will it set up Lion on a DVD, flash drive, or external HD exactly as it would on a Mac (Recovery Disk, etc.)?
6. How much space is needed on a destination disc/disk to install Lion?
7. Is it possible to boot from a different volume, mount this dmg, and install Lion from it?
8. Any advantages/disadvantages doing it this way (#7) as opposed to booting from the Lion install disc/disk created above?
9. Another method I'm thinking of using is to (after cloning my SL installation) actually install Lion on my MBP over my current SL installation (shudders violently ), clone it to an external HD, then erase/zero the MBP's HD and clone my SL install back to my MBP. Has anyone done this? Again, I'm concerned that Lion will do something goofy and leave some kind of footprint behind, like maybe messing with firmware; cloning my SL installation back to my internal HD would not reverse a firmware change.
10. Any constructive suggestions on anything related to any of these steps is welcome!
Yes, I've searched and read a number of responses, but I'm hoping much of the "discovery" phase is over, and there are some "solid"/refined answers by now. My bottom line is to be able to play with Lion without having to depend on it.
Thanks!
Backup Lion Bootable 10.7 Disk
Purchase and download Lion from the Mac App Store on any Lion compatible Mac running Snow Leopard.
Right click on “Mac OS X Lion” installer and choose the option to “Show Package Contents.”
Inside the Contents folder that appears you will find a SharedSupport folder and inside the SharedSupport folder you will find the “InstallESD.dmg.” This is the Lion boot disc image we have all been waiting for.
Copy “InstallESD.dmg” to another folder like the Desktop.
Launch Disk Utility and click the burn button.
Select the copied “InstallESD.dmg” as the image to burn, insert a standard sized 4.7 GB DVD, and wait for your new Lion Boot Disc to come out toasty hot.
With this disc you can boot any Lion compatible Mac, andinstall10.7 just like you installed previous version of Mac OS X. Youcan even use Disk Utility's Restore function to image your Lion bootdisc image onto a external drive suitable for performing a cleaninstall on a optical-drive-less MacBook Air, or Mac mini server.tjk wrote:
5. Using the install disc/disk created above, will it set up Lion on a DVD, flash drive, or external HD exactly as it would on a Mac (Recovery Disk, etc.)?
DVD: no, flash drive: if it's large enough, external hard drive: yes
6. How much space is needed on a destination disc/disk to install Lion?
Whatever Apple minimum requirements are.
7. Is it possible to boot from a different volume, mount this dmg, and install Lion from it?
possibly, never tried it, it is a dmg so it's a volume all to itself, except it can't install to the same media it's on and can only install to something formatted with GUID and a OS X extended format, like a flash drive or hard drive large enough.
DVD's can't be formatted with a GUID EFI partiton
8. Any advantages/disadvantages doing it this way (#7) as opposed to booting from the Lion install disc/disk created above?
Speed limitation of the media and bus your using, USB 1 is a slower than a hard drive with 7,200 RPM on a Firewire 800 port
9. Another method I'm thinking of using is to (after cloning my SL installation) actually install Lion on my MBP over my current SL installation (shudders violently ), clone it to an external HD, then erase/zero the MBP's HD and clone my SL install back to my MBP.
The problems come from installing Lion over a existing Snow Leopard setup that isn't quite pristine enough for Lions quirkyness, has tweaks or other software installed that breaks 10.7, requiring you to fix it.
You can try it, you've got the 10.6 clone to option boot off of and restore from.
Cloning back and forth is a performance enhancer, not a problem solver.
Ideally it's best to clone 10.6, disconnect, zero and install 10.6, same user name, then up to 10.6.8, then to 10.7, then install programs from fresh sources/copies and then files returned last from backup off the clone (no migration assistant or it brings trouble back)
This will ensure the best possible performance possible with the least trouble as everything is wiped and installed fresh. Only problem being your files it there is something wrong with them, which is easy to remedy to the cause as it's the only thing not pristine.
Once you've got a pristine system, then clone that twice, once for a immediate update other for falling back a week, two weeks or even a month back.
Has anyone done this? Again, I'm concerned that Lion will do something goofy and leave some kind of footprint behind, like maybe messing with firmware; cloning my SL installation back to my internal HD would not reverse a firmware change.
Firmware is hardware specific not OS specific, of course it's possible a old version of a OS won't work with newer firmware, like 10.5 for instance perhaps because Apple has dropped all work on PPC code.
10.6 and 10.7 are just fine with most all present firmware, however there will be a time where a new firmware update could disallow 10.6, likely when iOS X 10.8 Bobcat arrives.
10. Any constructive suggestions on anything related to any of these steps is welcome!
Yes, I've searched and read a number of responses, but I'm hoping much of the "discovery" phase is over, and there are some "solid"/refined answers by now. My bottom line is to be able to play with Lion without having to depend on it.
Cloning only clones the Lion OS X Partition, not the Lion Recovery Partition.
A comptuer that is Lion capable will boot off a media with no Lion Recovery Partition.
You need to create a Lion Disk Assistant USB which copies your Lion Recovery Partition.
It's in my post.
https://discussions.apple.com/message/16276201#16276201 -
How to restore from Time Machine WITHOUT install discs using a second Mac
It's a question that is asked repeatedly all over the web by Mac users like me that bought in to Time Machine (TM) on the assumption that if their computer died one day it would be a piece of cake to restore from it, only for that day to come and then to be told "ahh, okay the first thing is to get your computers install discs..." (loud crashing sound of world falling around ears).
I've never been able to afford a new Mac and both of my machines were bought second-hand. Neither came with Leopard (both have Tiger and have been upgraded to Leopard via the net). This was never supposed to be a problem as I've been backing up with TM. However it appears that Tiger discs are as much use as an inflatable dart board when it comes to using TM. So I've been faced with the possibility of having to spend £130 (about two hundred Pres Sheets, Yankees) on the Leopard install discs just so that I can have the option of restoring from TM. Bonkers.
However after much nashing of teeth, a very long weekend learning all sorts of things about 'Target Mode', 'Single User Mode', 'Verbose Mode', 'Open Source 9' etc the following solution has worked without the need to go out and buy those over-priced discs...
What you will need:
1 broken Mac requiring restoration
1 second donor Mac running Leopard (or Snow Leopard so long as the broken Mac can run it)
1 firewire cable with the correct fitting at either end to attach both Macs together
1 Time Machine backup
Note: The following is for when you have given up trying to boot from your hard drive. In my case I couldn't boot in to Safe Mode etc. so was forced to format my drive and re-import everything. If you've read this far I'm assuming your at the same point as well and have tried everything else that's out there first.
Also - both my Macs are Power PC's so can't run Snow Leopard, so I can't say 100% this will work with SL (Intel) machines. From what I've read Snow Leopard will work with this procedure too, but if you've found differently please feel free to add your experiences below...
STEP ONE: Format the corrupt Hard Drive or replace with a fresh HDD
*Link the two computers with a firewire.
*If you're replacing your HDD, remove your corrupted hard drive from the 'broken' machine and insert a new one.
*Power up the broken Mac whilst holding down the 'T' key. This will start it up in Target Mode and you'll get a nice firewire symbol floating around that machine's screen.
*Power up the second 'healthy' Mac. This will be our 'donor' machine. When it starts up after a few seconds you will see the hard drive of the broken Mac appear on the donor Mac's desktop.
*Using your donor Mac's 'Disc Utility', format the broken Mac's hard drive (now's the time to partition it etc. if you want to).
STEP TWO: Clone your donor Mac
Your broken Mac is no longer broken and now needs a new OS. But you don't have the discs, right? Well get this... you can clone your donor mac on to your machine, even if they are totally different i.e. a laptop on to a tower.
*Again using Disc Utility, click on your donor Mac's hard drive. The restore tab appears as an option.
*Click on restore and drag the donor Mac's hard drive that contains the operating system in to the Source box.
*Drag the newly formatted hard drive on the broken Mac in to the Destination box.
*Click restore. Your donor Mac's hard drive will now be 'cloned' on to your no-longer-broken Mac. Once this is done, eject the first Mac's hard drive from your donor Mac's desktop. You no longer need the donor Mac.
Ta daa! Your machine now starts up happy and smily again. Time to restore all that stuff that's been sat on your Time Machine drive...
STEP 3: Restore from Time Machine using Migration Assistant
This is the really clever part that prompted me to write this piece in the first place. Time Machine IS accessible without those Leopard install discs you don't have. You need to use something called 'Migration Assistant'.
*Start up your machine as normal and you'll see it is an exact clone of the donor machine. Weird huh?
*Attach your Time Machine hard drive. It will show up as an icon on the desktop and because of it's size, you'll be asked if you want to use it as a Time Machine backup. Err, NO YOU DON'T! Click 'cancel'.
*Open Migration Assistant (if you can't find it just type it in to Finder and click). There are three options, the middle one being to restore from TM or another disc. Yup, you want that one.
*Migration Assistant will now ask you what you want to restore in stages, firstly User Accounts, then folders, Apps etc. It will even import internet settings
And that's you done. Let Migration Assistant do it's thang... altogether I had about 140gb to restore, so it wasn't exactly speedy. This wasn't helped by the fact that my TM hard drive is connected via USB (yes, I know). Just leave it alone and it'll whirr happily away...
Before I go - you don't have an option of when to restore from, and will restore from the last Time Machine save. At least then you should be able to access TM and go 'backwards' if you need to.
Also - for a Mac expert, the above will be up there with 'Spot Goes To The Farm' in terms of complexity. However, for the rest of us the above is only available in fragments all over the net. By far the most common response to 'how do I restore from Time Machine without install discs' is 'you can't'. If I'd found the above information in one place I could have saved a lot of hair pulling and swearing over the last couple of days, so forgive me for sharing this workaround with the rest of the world. Meanwhile your expertise will come in very handy for the inevitable questions that will get posted below, so please feel free to help those people that won't be sure if this solution is the right one for them. I'm no expert, I just want to help people that were stuck in the same situation (and looking at the web, there's a LOT of them).
Hope this is of use to someone, thanks and *good luck*!Most maintenance and repair, restore and install procedures require the use
of the correct OS X install DVD; be it an original machine-specific restore/install
disc set or a later retail non-specific general install disc set.
By having an unsupported system, perhaps installed via an illegal download or
other file-sharing scheme, where no retail official discs are involved and the
initial upgrade was done by other means outside of the License Agreements,
you are asking us to discuss a matter of illegal installation and use of a product.
There are no legal complete OS X system download upgrades online; only bits
that are update segments to a retail or as-shipped machine's original OS X install.
+{Or an installation where a previous owner had correct retail upgrade discs, &+
+chose to not include them with the re-sale of the computer it was installed in.}+
However, to answer the initial question. To get and use an externally enclosed
hard drive in suitable boot-capable housing, and get a free-running Clone
Utility (download online; often a donation-ware product, runs free) you can
make a bootable backup of everything in your computer to an external HDD.
This is the way to make a complete backup to restore all functions to the computer.
The Time Machine has some limits, in that it can restore only that which it saves.
It does not make a bootable clone of your entire computer system with apps and
your files, to an external drive device. A clone can. And some of the clone utility's
settings can also backup changes to an external drive's system; if that other drive
is attached to the computer correctly.
Carbon Copy Cloner, from Bombich Software; and also SuperDuper, another of
the most known software names you can download and use to clone boot-capable
system backups of your computer's hard disk drive contents, are often cited.
However you resolve the matter of the running OS X system in your computer,
derived from what appears to be questionable means, is part of the initial issue.
Since you do need to be able to fix an existing installation by unmounting the
computer's hard disk drive and run the computer from the other (install disc or
system clone) while it is Unmounted; and use the correct Disk Utility version to
help diagnose and perhaps be able to fix it. You can't use a Tiger version Disk
Utility to fix a Leopard installation, and so on.
So, the situation and replies as far as they can go (since the matter does
constitute an illegal system, if it was arrived at without correct discs) is a
limited one. And file sharing of copied Mac OS X (and other) software is
also considered illegal.
And, one way to get odd malware and unusual stuff, is to get an unauthorized
system upgrade from an illegal source online. You never know what's inside it.
The other reply was not a personal attack; the matter is of legal status and as
you have a product with a questionable system, the answer is to correct it.
And if you want to save everything in your computer, make a clone to a suitable
externally enclosed self-powered boot capable hard disk drive. With older PPC
Macs, that would best be to one with FireWire and the Oxford-type control chips.
However that works out...
Good luck & happy computing! -
Can I use my old 2009 app install disc to put iWeb on new Mac?
Hi All,
I dropped my 09 13"MBP and killed it :-( luckily all data was backed up and my insurance has payed out to replace the Mac :-) I have my eye on a 15" model and really need to continue using iWeb. I'm aware the new MBPs no longer ship with it and wondered if I could use my original app install disc from my wrecked machine to install iWeb on the new Mac?
Thoughts or ideas on doing this appreciated!
RichYou should be able to. I have used an early 2011 App disc to install both iDVD and iWeb on Lion. Just make sure you use Software update before you try to run them to bring them up to the latest versions. You may have to run it more then once to get the newest versions.
-
Can I use my iMac Install Disc on Macbook Pro?
Hi, all. I was given a friend's old Macbook Pro and I'd like to put Boot Camp on it, but the Boot Camp instructions say I need an OSX Leopard install disc to do it. Naturally, I just recently purged my own software binder and threw away all of my OSX discs except the one that came with iMac I recently purchased. "Why would I need them any more?" said I. Doh.
I have no idea what cat Apple is up to now, but the Macbook is running 10.5.8 and the install disc from my iMac is 10.6.7. My questions:
1) Can I use my iMac install disc on my Macbook Pro, which is about 3-4 years old?
2) Does OS 10.6.7 qualify as Leopard? If not, will it work for what I'm trying to do?
3) Do I need to update the Macbook OS to 10.6.7 to be able to use that disc for the Boot Camp install?
Any information or advice would be appreciated. Thanks!The only thing I'd add to this is that at one point in time you could go to an Apple store and purchase Lion on a USB stick.
If your MBP was compatible and you could find one of those you could boot to it, install from it then setup bootcamp.
Also if you are thinking bootcamp, also consider VMWare Fusion or Parallels which allow you to run Windows while still in OS X. -
TS2570 Question re: "Start from your Mac OS X Install disc; use Disk Utility"
I've worked my way through the step-by-step trouble shooting in the TS2570 article up to "Start from your Mac OS X Install disc; use Disk Utility". So far, every step results in the same outcome - my formerly trusty 2007 Intel duo core iMac (24") will not start up, freezing on a grey screen with a blinking question mark on a folder. I don't completely understand this next step. I have both a Leopard and a Snow Leopard disc. I'm not positive whether these were for the iMac, or my old Macbook Pro. I assume this makes a difference.
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
A flashing question mark or globe appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Does it matter which install discs I use?
I just set up my new MacBook and transferred everything from my old PowerBook to the new machine.
My question is whether or not I can now use the Leopard install discs that came with the MacBook to install Leopard on the PowerBook and on my Mac Pro while I wait for my PURCHASED copy of Leopard to arrive in the mail from Amazon.
I want to give the PowerBook to my son as an early birthday gift, but I also wanted to wait until all three Macs were running Leopard. In the interest of time -- as the copy of Leopard that I bought from Amazon isn't due to arrive till this Monday -- I was wondering if it'd be alright to use the Leopard discs that I just got with the MacBook to update the Mac Pro and the PowerBook. Would this be a legal issue, since I ordered an auxiliary copy already?
I just want to be on the up-and-up. Thanks in advance for any help!tizoast wrote:
I just set up my new MacBook and transferred everything from my old PowerBook to the new machine.
My question is whether or not I can now use the Leopard install discs that came with the MacBook to install Leopard on the PowerBook and on my Mac Pro while I wait for my PURCHASED copy of Leopard to arrive in the mail from Amazon.
I want to give the PowerBook to my son as an early birthday gift, but I also wanted to wait until all three Macs were running Leopard. In the interest of time -- as the copy of Leopard that I bought from Amazon isn't due to arrive till this Monday -- I was wondering if it'd be alright to use the Leopard discs that I just got with the MacBook to update the Mac Pro and the PowerBook. Would this be a legal issue, since I ordered an auxiliary copy already?
I just want to be on the up-and-up. Thanks in advance for any help!
If the powerbook is PPC, and the Macbook Intel, then the answer is no, it won't work. The re-install disks that come with a computer are usually keyed to that computer hardware; in the case of PPC vs. Intel even more so. You will have to wait. -
Reinstalling Tiger using a install disc from another mac?
I have 2 macbook pros. A brand new one with the Santa Rosa chip and 1 with the older chip. Can I use the disc that came with the new mac with the newest version of OS and other programs to update the older macbook pro?
Thanks.rick.pearl wrote:
Does this mean that I shouldn't use the Generic Tiger install disc to reformat the macbook pro either? Would I be missing drivers or anything by doing this?
Well, if by "Generic" you mean the boxed retail version of Tiger, you wouldn't be able to boot from it. No boxed retail Tiger has the Intel software or drivers necessary to boot an Intel Mac. Only the discs shipped with Intel CPUs have the Intel OS on them.
Presumably this is not the case with the Leopard discs, which must have the code for both architectures...
charlie
Maybe you are looking for
-
Receiver file channel with ANSI format.
Hi, I have developed file to file scenario for which sender file format is unicode and receiver file format is ANSI. There is no FCC at sender and receiver site. In interface we are just bypassing the file in PI, there is no ESR objects. I have confi
-
Hey all- I have been frequenting these forums alot lately it seems. I recently returned my Sony SR42 HDD camcorder for a JVC MG155U HDD thinking that because the JVC has a firewire option and the Sony does not, it would be alot easier. I like the ide
-
-->i have getting assignment to debug the j2ee project . -->but i am unable to capture jsp related errors. -->how can I debugg project by which I can eliminate errors related jsp from my project. -->while I am using ecllipse editor . Message was edit
-
Acrobat could not perform recognition (OCR) on this page because this page contains renderable text
I have a pdf file, which was OCRed by some other software, I am not satisfied with its accuracy, and would like to run adobe acrobat to OCR it again. But Adobe says "Acrobat could not perform recognition (OCR) on this page because this page contains
-
Hello, I live in Russia and would like to purchase I-phone through the online store E-bay from a private individual. As in this case, the guarantee?