Re: X99S SLI, No Display and Can't tell if it's posting

Thanks everyone for helping! It turns out I did not understand how to properly connect my graphics card. I needed to connect to both the 8-pin and 6-pin connector of my GPU. I was confused by the cable which had 2 6-pin connectors and a 2-pin connector...

Ok this will be kind of long, and just a forewarning I am by no means a computer expert so please bare with me. Here are my PC specs to start off
2500k 3.4ghz (it was 4.4ghz but i reset my bios to rule out the overclocking could be the issue)
EVGA 780g...

Similar Messages

  • I have installed Find My Friends app in my iPhone5 and can anyone tell me how can I insert my photo so that my friends can see me? Thank you.

    I have installed Find My Friends app in my iPhone5 and can anyone tell me how can I insert my photo so that my friends can see me? Thank you.

    I don't have Find My Friends installed but if I understand correctly, the photos that would display on your friends phones would come from the Contacts on their phone. Here is a previous discussion that may help: https://discussions.apple.com/message/25429023#25429023

  • I am having a 3gs 8gb and can anyone tell how i could confirm that whether my iphone is factory unlocked or jailbreak??

    i am having a 3gs 8gb and can anyone tell how i could confirm that whether my iphone is factory unlocked or jailbreak??

    It sounds like you are most likely going to need a hardware repair.  If the phone is still in-warranty, you should be able to do this pretty easily by contacting AppleCare at 1-800-My-iPhone (1-800-694-4766) or taking your phone to an Apple Retail Store.
    The surest way to find out if an issue is software related is to restore the phone as a new device via itunes, then when prompted to choose between restoring from a backup and setting up as a new device, go ahead and disconnect the phone and test it before choosing one of those two options.  If the issue still occurs at this point, its not software related and the phone will need to be repaired.  However, if it did resolve the issue, you can plug the phone back into your computer and you will be prompted with the same options again, and may continue to restore from your available backup.
    Hope this helped!

  • What has Apple got against Flash, and can anyone tell me when 4G will be available on UK Ipads please.

    What has Apple got against Flash, and can anyone tell me when 4G will be available on UK Ipads please.

    Flash : http://www.apple.com/hotnews/thoughts-on-flash/ . And as Adobe have also announced that they are stopping development on all mobile versions of flash it's unlikely to ever happen. You could try third-party browser apps such as Skyfire, iSwifter, Puffin and Photon which 'work' on some flash-based sites, but judging by their reviews not all. Also some websites, especially news/media sites, have their own apps in the App Store.
    In terms of 4G here in the UK, there aren't currently any 4G networks services available here - and I'm not sure that the auction for the 4G spectrum here has even happened yet, so it probably won't be any time soon. But I don't think that the current iPad will be able to work on the UK's 4G spectrum which is different to what is being used in the US.

  • Can anyone tell me how to post videos taken on the iPhone that are now stored on the Air on Facebook?

    Can anyone tell me how to post videos taken on the iPhone that are now stored on the Air on Facebook?

    Hi
    Yeah got onto that but it won't load up anything readable. It just produces a little annimation of 35mm film strip and when you click on it - nothing. All you end up doing is clicking on the X in the top right hand corner of the annimation and deleting it. Really frustrating because uploading from the iPhone is simple, but I've deleted it off that and can't get it back from the Mac to the iPone either. Seem to be trapped no matter what i do.
    Thanks for your help though

  • While playing a game or on Facebook, sometimes the game or program just goes off.  Then I have to start over.  It seems to be doing it more often.  Does anyone else have this problem and can you tell me how to fix it?

    What makes the I-pad kick off while playing games or on Facebook?

    Addition:
    Stupid thing is my computer works fine only internet connected stuff causes TOTAL freezes: nothing works. <CTRL>+<ALT>+<DEL> doesnt react. <ESC> neighter. I can only get my computer to react by "killing" it completely with power shut off ("pull the plug") and starting up from scratch.
    My partners computer is working fine. He also has updated to V10.0.2 And can play the game or do anything else. It happens on my laptop with Windows vista.
    Now Im typing this on an other computer. So the computer details of this one are NOT RELEVANT. Please ignore.
    Because of TOTAL freeze I get NO troubleshooting information.
    The whole screen is a still. Sorry.
    So, now Im pretty sure its FF V10.0.2 cause we've ruled out pretty much everything else and before I go through the whole installation process... This is my LAST hope.
    ANYBODY??? PLEASE HELP ME???

  • In Firefox 5.0 I cannot view add-ons and can't tell if they're running.

    When I click on Tools | Add-ons, Firefox just takes me to the Mozilla Web page for add-ons instead of showing me a list of the add-ons installed on this machine. I can't tell what add-ons are running and which are not. I re-installed Forecastfox, but I still can't see the Forecastfox information icons at the bottom of the browser screen. Adblock Plus is running, but now it has its own place in the Tools menu, separate from other add-ons.

    Whew! Thanks. I wasn't expecting the information to be in the browser window. And now that I selected View Add-on Bar I can see the Forecastfox weather info. Thank you again.

  • Unicode (?) Displaying and Can't Figure Out How To Fix

    Since this thread was closed:
    https://support.mozilla.org/en-US/questions/979466
    I've tried everything there. I've cleared font caches in Windows 7, I've changed languages back and forth, etc.. Still can't get sites to display right in firefox or chrome. ie works fine.
    Example page:
    http://rxspeed.com/auto-parts/accel
    Screen capture here:
    https://www.diigo.com/item/image/59bq9/stnu

    Is the issue still there after upgrading.
    Here are a few more things to try:
    1) Start in safemode:
    '''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
    * Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    '''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".
    ;[[Image:SafeMode-Fx35]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.
    If that does not work try
    Restarting your PC
    IF the restart does not work you can try a Clean reinstall
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from [https://www.mozilla.org mozilla.org] (or choose the download for your operating system and language from [https://www.mozilla.org/firefox/all/ this page]) and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (or open the Firefox menu [[Image:New Fx Menu]] and click the close button [[Image:Close 29]]).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
    <b>WARNING:</b> Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be easily recovered unless they have been backed up to an external device!</u> See [[Back up and restore information in Firefox profiles]]. <!-- Starting in Firefox 31, the Firefox uninstaller no longer lets you remove user profile data.Ref: Bug 432017 and https://support.mozilla.org/kb/uninstall-firefox-from-your-computer/discuss/5279 [Fx31] Windows uninstaller will no longer offer the option to remove personal data -->
    Please report back to say if this helped you!
    Thank you.

  • Lightroom 2.3 trial version loads pictures in grey in grid display and can"t see the picture

    Tried looking for a setting to activate the modules library and develop shows grey boxes and shows the labels of the pictures loaded in raw but not the picture itself.  In quick slideshow view, I can see an individual picture.  I have attached  screen shot.  any help will be appreciated.. thanks

    See solution here: http://www.adobe.com/go/kb402376

  • "URL is too long to handle" message displayed, and can't logon to wifi conection.

    How do I correct this.

    It's good that you have a solution. But your solution suggests that your original problem was not that the URL was too long, since you are still using GET. Probably it was something else. But at least you have a solution.

  • Install errors with many 2014 apps and can we safely uninstall previous versions post-installation of the new releases?

    I'm getting errors for several CC 2014 applications. The CC desktop says "Installation Failed", and yet some have actually been installed despite the failed message.
    I also want to know if we can/should uninstall the old versions (CC and CC 64-bit) before (or after?) updating, because rather than upgrading the applications (which would have been nice), it just installs alongside them....so now I have 3 versions of Illustrator, 3 versions of PS, etc. I don't want all these versions, only the latest. Is it safe to uninstall the older versions (CC and CC 64) post-failed-installation of 2014, or should I just uninstall all and reinstall?
    Thanks in advance.

    I'm getting errors for several CC 2014 applications. The CC desktop says "Installation Failed", and yet some have actually been installed despite the failed message.
    I also want to know if we can/should uninstall the old versions (CC and CC 64-bit) before (or after?) updating, because rather than upgrading the applications (which would have been nice), it just installs alongside them....so now I have 3 versions of Illustrator, 3 versions of PS, etc. I don't want all these versions, only the latest. Is it safe to uninstall the older versions (CC and CC 64) post-failed-installation of 2014, or should I just uninstall all and reinstall?
    Thanks in advance.

  • Please could you tell me if the Mackeeper is worth downloading and can anyone tell me if they have found it useful ?

    my computer was bought in 2006 and was upgraded and the screen replaced about three years ago. It's running on OS 10.5.8.  processor 1.83 GHz intel core Duo.  Memory 512 MB 667 MHz DDR2 SDRAM. Thank you. Teresa Linsey

    Apps like MacKeeper or any other maintenance apps like CleanMyMac 1 or 2, TuneUpMyMac, MacCleanse or anything like these apps, installed on your Mac, while they appear to be helpful, can do too good a job of data "cleanup" causing the potential to do serious data corruption or data deletion and render a perfectly running OS completely dead and useless leaving you with a frozen, non-functional Mac.
    Plus, these type of apps aren't really necessary OR needed. They really aren't.
    There are manual methods to clear off unnecessary data off of your Mac that are safer and you have complete control over your Mac and not just leave a piece of auto cleaning software in charge of clearing off data off of your Mac. Their potential of causing OS X issues outweighs the implied good and benefits these types of hard drive or memory "cleaning" apps are written to do.
    These types of  system 'cleaning" apps are very poorly written and are really a scam to rob newbie and novice Mac users of their hard earned cash for a poorly written maintenance program that will do much more harm to a perfectly normal running OS X system than the good that the app developers purport these types of apps will do.
    Plus, the software companies that write these apps make it hard to easily uninstall these apps if something DOES go wrong and these apps work in a way where you have no recovery or revert function to return your Mac back to its former, working state in the event something does go wrong.
    It is best to never, EVER download and install these types of apps.
    The risk to your system and important data is too great a risk!

  • I just got my first mac and can anyone tell me how to change my address book to look like an actual book?

    Just got my first Mac and cant find how to change the appearance of my address book.  Can anyone help?

    Check out the built-in Address Book Help guide on your Mac (in Address Book, choose Address Book Help from the Help menu.  I dont think you can change the way the address book looks in terms of changing its appearance to look more book like, but I could be wrong.  I checked out a few google searches and did not find anything that stated how to do what you are asking.  If you find you cant change it to your desired specifications, you can always make the suggestion to Apple: http://www.apple.com/feedback/ 

  • Why can't i close Zafari ?? And can you tell me how to do.

    Suddenly i can't close Zafari down ?? I never had that problem with my mac before.
    It's only 6 months old.

    You can help by giving some specific info. If you need to force quit then try one of the following procedures.
    To force quit an application, choose Force Quit from the Apple menu (or press Command-Option-Esc), then choose the unresponsive application in the Force Quit window, and click Force Quit.
    Optionally, you may be able to Option-right click the application's icon in the Dock and choose Force Quit from the contextual menu.
    Additionally, you can force quit the front-most application in Mac OS X v10.5 or later by pressing Command-Option-Shift-Esc for three seconds.
    If the Finder is unresponsive, you can use Force Quit to quit and relaunch it. Select Finder in the Force Quit Window, then click Relaunch.
    Activity Monitor will allow you to quit/force quit individual processes. Sometimes this will require an admin password. It should be used with caution, as Force Quitting a parent process will Force Quit all of its children processes too. For instance, Force Quitting the loginwindow process will end all user processes and dump the user back out to the Login Window.
    Using the Terminal, you can use the kill command along with a process's PID to kill that process. This is basically the same thing as using Activity Monitor above.

  • HT1212 hi, i bought  this phone 18 month ago and now i want to unlock this phone and can u tell me if u can

    hi i bougt this phone 18 mths ago and i want to unlock this phone now can u do this for me

    Hi ravipal,
    You phone can only be unlocked by your carrier. You need to contact them. Just FYI, we are not Apple here - we are just users like you.
    Cheers,
    GB

Maybe you are looking for