Read dynamic file name

Dear Experts,
I need to read a file from the application server with the file name "static""timestamp".txt, where static is the static file name and timestamp would be added at the end of the file name. Please suggest me a way to read all such files one by one.
thanks

Hi
You need to scan the path in order to get all files stored and then to read it;
You can use the fm EPS_GET_DIRECTORY_LISTING in order to scan the directory:
DATA: dir_name  LIKE  epsf-epsdirnam,
      file_mask LIKE  epsf-epsfilnam.
DATA: filename  TYPE string.
DATA: t_dir_list TYPE STANDARD TABLE OF epsfili WITH HEADER LINE.
dir_name  = '<application path name>'.
file_mask = '<static>*.*'.
CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
  EXPORTING
    dir_name               = dir_name
    file_mask              = file_mask
  TABLES
    dir_list               = t_dir_list
  EXCEPTIONS
    invalid_eps_subdir     = 1
    sapgparam_failed       = 2
    build_directory_failed = 3
    no_authorization       = 4
    read_directory_failed  = 5
    too_many_read_errors   = 6
    empty_directory_list   = 7
    OTHERS                 = 8.
IF sy-subrc <> 0.
ENDIF.
LOOP AT t_dir_list.
  CONCATENATE dir_name '/' t_dir_list-name INTO filename.
  OPEN DATASET filename FOR INPUT IN TEXT MODE ENCODING DEFAULT.
  CLOSE DATASET filename.
ENDLOOP.
Max

Similar Messages

  • How to read dynamic file names in RSEINB00?

    Hi, ABAP Gurus,
    actually I'm a PI Consultant. Now I have a scenario to use the report RSEINB00.
    In the Applicaton Server i put ASCII IDocs with the following name convension: <static name>+<time stemple>:
    SAPIDOC20111127-224128-952.txt
    SAPIDOC20111127-224129-115.txt
    I created a new port in WE21 and the Outbound file and Inbound fiel tabs haben the same configration:
    physical directory: /ABC/DEV100/inbound/
    Function module: EDI_PATH_CREATE_DATE_TIME
    Inbound file: SAPIDOC.txt
    To execute the report RSEINB00 I must give the complete file name and port. It is not convenient.
    My target is, with a job to run RSEINB00 once daily to read all files with name "SAPIDOC + <time stemple>" full automatically.
    Is it possible? how to figure it out?
    thanks a lot in advance! <removed by moderator>.
    Regards
    Rene
    Edited by: Thomas Zloch on Nov 29, 2011 5:23 PM

    with the extension of the standard report RSEINB00 i solved this problem. here is some code:
    DATA:
      dir_name  LIKE  epsf-epsdirnam,
      file_mask LIKE  epsf-epsfilnam,
      g_message_fields LIKE edimessage.
    DATA:
      filename LIKE  edi_path-pthnam,
      filename2 LIKE edi_path-pthnam,
      myport TYPE EDIPO-PORT.
    DATA: h_EDIDC     LIKE EDIDC.
    DATA:
      wa TYPE file_table.
    DATA:
      t_dir_list TYPE STANDARD TABLE OF epsfili WITH HEADER LINE,
      itab TYPE table of file_table WITH HEADER LINE.
    *The directoy, where the Markant ASCII IDocs are droped by XI.
    dir_name = '<.../inbound>'.
    *File mask of ASCII IDocs.
    file_mask = 'XYIDOC.'.
    *File port.
    myport = '<Portname>'.
    CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
      EXPORTING
        dir_name               = dir_name
        file_mask              = file_mask
      TABLES
        dir_list               = t_dir_list
      EXCEPTIONS
        invalid_eps_subdir     = 1
        sapgparam_failed       = 2
        build_directory_failed = 3
        no_authorization       = 4
        read_directory_failed  = 5
        too_many_read_errors   = 6
        empty_directory_list   = 7
        OTHERS                 = 8.
    IF sy-subrc <> 0.
      MESSAGE e600(fr) WITH 'No ASCII IDoc exits'.
    ENDIF.
    "BREAK-POINT.
    *The old ASCII IDocs are stored in a dataset and copied with new file name sent_<original name>
    LOOP AT t_dir_list.
      CONCATENATE dir_name '/' t_dir_list-name INTO filename.
      CONCATENATE dir_name '/sent_' t_dir_list-name INTO filename2.
    open dataset filename for input in text mode.
    open dataset filename2 for output in text mode.
    if sy-subrc = 0.
      do.
        read dataset filename into wa.
          if sy-subrc <> 0.
           exit.
          endif.
      transfer wa to filename2.
         append wa to itab.
           enddo.
    endif.
    close dataset filename.
    *loop at itab into wa.
    transfer wa to filename2.
    *endloop.
    close dataset filename2.
      PERFORM inbound_processing USING filename.
    ENDLOOP.
    *&      Form  inbound_processing
    FORM inbound_processing USING filename TYPE edi_path-pthnam.
    do inbound processing from file
      CALL FUNCTION 'IDOC_INBOUND_FROM_FILE'
        EXPORTING
          file_name            = filename
          port                 = myport
        EXCEPTIONS
          file_open_failed     = 1
          marker_to_be_deleted = 2
          read_file_failed     = 3
          idoc_not_stored      = 4
          file_delete_failed   = 5
          marker_modify_failed = 6
          event_create_failed  = 7
          first_record_invalid = 8
          invalid_record       = 9
          OTHERS               = 10.
      IF sy-subrc <> 0.
    fill message fields for exception handling from system fields
        MOVE-CORRESPONDING sy TO g_message_fields.
    error handling using the 3.0 business workflow
        CALL FUNCTION 'IDOC_ERROR_WORKFLOW_START'
          EXPORTING
            docnum                  = 0
            eventcode               = 'EDIM'
            mess                    = g_message_fields
          EXCEPTIONS
            no_entry_in_tede5       = 0
            error_in_start_workflow = 0
            OTHERS                  = 0.
    do not care for exceptions here
        COMMIT WORK.
    append message for RFC
        MESSAGE ID     g_message_fields-msgid
                TYPE   'A'
                NUMBER g_message_fields-msgno
                WITH   g_message_fields-msgv1 g_message_fields-msgv2
                       g_message_fields-msgv3 g_message_fields-msgv4.
      ENDIF.
    ENDFORM.                    "inbound_processing

  • Dynamic File Name depending on the Source File name

    Hi Experts,
    I have a problem like Dynamic File name depending on the Source File Name. I will explain with example as follwos
    Source File name                 Targer Folder/Filename
    NK01.VR59.L2007030         VR59/Rec.l200
    NK01.VR71.L2017030         VR71/Rec.l201
    NK01.VR77.L2027030         VR77/Rec.l202
    See above the exaple, Depending on the Source file name, I am deciding where i need to place my file and what name i need to name it.
    So please suggest me the solution and How can i do this with a single communication channel ? Do i need to create multiple CC for each folder??
    Points will be rewarded for Valuable anwer.
    Thanks in Advance,
    Best Regads,
    Vijay

    Hi VIjay,
    Thanks for quick reply. But i am getting error in End to End Scenarios only. If i remove the Return " "  statement from the UDF, while activating it is showing the error saying like missing return statement. I also mapped to the top most node to this UDF.
    I am getting the following error in End to End error Scenarios:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
      <SAP:P1>com/sap/xi/tf/_MM_Target_File_determined_</SAP:P1>
      <SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
      <SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:P3>
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>During the application mapping com/sap/xi/tf/_MM_Target_File_determined_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>

  • Dynamic File Name and File size

    Hi All
    I need some help in calling Dynamic File Name and Dynamic File size of a file in my adapter Module.
    Could you please provided some help on the same?
    I have tried the same through UDF it is working. Could anyone provide me the steps for the same
    Regards
    Abhishek Mahajan

    Hi,
    You can use the already available adapter module "DynamicConfigurationBean". Have this adapter module at the top of the module list in CC.
    Have the parameter value as insert http://sap.com/xi/XI/System/File FileName and http://sap.com/xi/XI/System/File SourceFileSize (corresponding to the key names)
    For more info:
    http://help.sap.com/saphelp_nw04/helpdata/en/45/da2239feb22e98e10000000a155369/frameset.htm
    There is also a SAP note available for the same....dont remember the note number:(.....
    Regards,
    Abhishek.

  • Dynamic file names in outbound file adapter

    I have to configure a flow in XI system wich takes an input file from one machine and after mapping process leaves the output file in target machine with the same name of input file.
    Name of input file won't be always the same (*.dat) so i cannot hardcode this name in outbound file adapter.
    Does anyone know how to transfer input filename from inbound file adapter to XI message and then to outbound file adapter?
    I know there is an option to create dynamic file names in file adapter but i think it isn't enought to solve my problem.

    I have to configure a flow in XI system wich takes an input file from one machine and after mapping process leaves the output file in target machine with the same name of input file.
    Name of input file won't be always the same (*.dat) so i cannot hardcode this name in outbound file adapter.
    Does anyone know how to transfer input filename from inbound file adapter to XI message and then to outbound file adapter?
    I know there is an option to create dynamic file names in file adapter but i think it isn't enought to solve my problem.

  • Dynamic file name from messsage payload

    Hi Friends,
    My requirement is to read one .xml file , which has  Purchase Order deatails and place .html file on receiver side, we are using XSLT for mapping.
    The file name should be "POnumber.html " , i've gone through below but couldn't get much
    http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/content.htm
    Can any one send the that code , and steps to add that code in side XSLT.
    Thanks
    John

    Hi,
    With above links
    /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
    /people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
    See in the below Michal blog , how to conver the file as html , take that part only.
    /people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
    Regards
    Chilla

  • Dynamic file Name Generation-problem

    Hi Friends..
    in My Idoc to File..
    i want to generate Dynamic File Name ..
    i put the logic in Message mapping -java intialization section
    Container container = null;
    SimpleDateFormat simpledatFormat = new SimpleDateFormat("yyyyMMdd");
    Date date = new Date();
    String datewithYear = simpledatFormat.format(date);
    SimpleDateFormat simpledatFormat1 = new SimpleDateFormat("HHmmss");
    Date date1 = new Date();
    String datewithMs = simpledatFormat1.format(date1);
    DynamicConfiguration conf = ((DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION));
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http:/"+"/"+"sap.com"+"/"+"xi"+"/"+"XI"+"/"+"System"+"/"+"File" , "FileName");
    String oldFileName=conf.get(key);
    String valueNew;
    if( oldFileName == null){
    valueNew = "HRXML"+datewithYear+datewithMs+".xml";
    else{
    valueNew =oldFileName+datewithYear+datewithMs+".xml";
    //set the new filename
    conf.put(key, valueNew);
    and i did in reciever File adaper adaper specific settings..
    i am getting error sxmb_moni..
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
      <SAP:P1>com/sap/xi/tf/_ZHRMD5_to_HRMasterData_MM_</SAP:P1>
      <SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
      <SAP:P3>java.lang.NullPointerException</SAP:P3>
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_ZHRMD5_to_HRMasterData_MM_: java.lang.NullPointerException</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    if we remove the dynamic File configuration  logic in message mapping ..i am getting the result..
    please guide me..

    Container container = null;
    DynamicConfiguration conf = ((DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION));
    bound to get a NPE as your variable container is not getting intialized to a valid object ref here...

  • Dynamic file name in communication channel

    hello
    is it possible to give in the communication channel, under the 'File Access Parameters', a dynamic file name?
    to get it out of a table or something?
    Thanks
    Kfir

    Hi,
    Yes its bit possible to use the dynamic file name at File access paramters
    The dynamic filename generation concept is as follows.
    In your filename field. just give a variable with % symbols. (eg: %file% ).
    Now, under the option Variable Name Substitution, you can give how the value has to be created.
    It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
    For the former, your give
    message:interface_name ,etc
    and for the payload part you give,
    Payload: "your element root which u wanna acecss"
    Just check this link out,
    http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
    And read the contents under variable substitution and it will help you understand the concepts better.
    If you have any clarifications, do get back,
    Refer below links for more in depth details about it
    Re: Dynamic file name in Receiver File Adapter
    http://help.sap.com/saphelp_nw2004s/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/frameset.htm
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    /people/sap.user72/blog/2005/10/01/xi-new-features-in-sp14
    /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
    /people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
    /people/michal.krawczyk2/blog/2006/02/23/xi-dynamic-name-in-the-mail-attachment--pseudo-variable-substitution
    http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
    Check out this URL
    http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
    Check these weblogs as well...
    /people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12
    /people/sameer.shadab/blog/2005/09/23/an-interesting-usage-of-variable-substitution-in-xi
    Thanks
    Swarup

  • How to handle Dynamic File Name

    Hello All,
    I have a  requirement, I have to download a file from application server to my ABAP program which will be executed in the background. The problem is the file name is a dynamic file name with timestamp on it. So how do I read the file from the application server. I know there are certain function modules but I don't think so that they can work in background.
    So If anyone has worked on it before your reply would be helpful.
    Thanks and Regards,
    Sushil

    Hi,
    Use this funcation module this will return you the list of files in a directory...
    It will work even in back group processing also..
    SUBST_GET_FILE_LIST
    or if it is unix environ ment.
    data: begin of t_tabl occurs 0,
    line(132),
    end of t_tabl,
    data: lc_command(100) type c.
    Get all the file name falling under specified directory...
    lc_command(3) = 'ls '.
    lc_command+3(45) = p_dir. " Directory of file path
    call 'SYSTEM' id 'COMMAND' field lc_command
    id 'TAB' field t_tabl-sys.
    Check any files exits in the directory.......................
    if t_tabl[] is initial.
    message e006 with 'No files exist in the specified directory ' p_dir.
    endif.
    here you will have all the file names in t_tab1 you can sort by name and will get the latest file in order..
    Thanks
    Mahesh
    Message was edited by:
            I Can Solve It

  • How to read a file name and send it a particular reciever

    Hi,
    I have a scenario, where i am receiving a a file and based on the file name i have to decide who is the receiver and send it to that particular receiver.I do not have to do any mapping.
    can someone suggest me how can I achieve this.
    Thanks in advance.

    HI This may help you.Let me know if not.
    Step by Step Guide: XML File 2 XML File Scenario: Part I
    Step by Step Guide: XML File 2 XML File Scenario: Part II
    Converting XML to PDF using XI
    Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
    Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
    "JAVA MAPPING", an alternate way of reading a CSV file
    Dynamic File Name using XI 3.0 SP12 Part - I
    Dynamic file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II
    Push Data to MVC Architectured application using XI
    How to send any data (even binary) through XI, without using the Integration Repository
    XI in the role of a FTP
    The specified item was not found.
    The specified item was not found.
    The specified item was not found.
    The specified item was not found.

  • Log4j - dynamic file name

    Hi
    I hava some servers that use log4j to log in shared folder.
    i want that every server will create his own log file with his host name.
    I'm using log4j.xml to configure the appender and I want to use variable to create dynamic file name.
    Could it passible?
    Here is my appender:
         <appender name="traceFile" class="org.apache.log4j.RollingFileAppender">
              <param name="file" value="C:/temp/traceLog.log" />
              <param name="MaxFileSize" value="1000KB" />
              <!-- Keep one backup file -->
              <param name="MaxBackupIndex" value="10" />
              <layout class="org.apache.log4j.PatternLayout">
                   <param name="ConversionPattern" value="%d %p %t %m%n" />
              </layout>
         </appender>
    tnx Yaniv

    yaniv1977 wrote:
    Hi
    I hava some servers that use log4j to log in shared folder.
    i want that every server will create his own log file with his host name.
    I'm using log4j.xml to configure the appender and I want to use variable to create dynamic file name.
    Could it passible?
    And what happens to your distributed enterprise system when that shared folder is not available?

  • Dynamic file name from input payload (RFC 2 flat file)

    Hi,
    I have an RFC to flat file scenario. The output flat file has not an XML structure, it's just a plain text file generated with abap mapping.
    In my source interface (RFC), I have a field called <FILENAME>, I want to use the value of that field to create the target file using dynamic file name. But if  in variable substitution I use payload:ZRFC_NAME,1,FILENAME,1 It doesn't work because the dynamic variable substitution try to access to output payload, not the source one...
    What can I do?

    Hi Marshal,
           You can add a extra node to your target strucutre like
    FileName- Node
    --FileName - Element.
    do the mapping from the field filename of RFC to FileName field in u r target strucure. And use this  field path at Refrence in variable subtituion.
    In the Content converison add the Name & Values as below
    FileName.fileldNames -- FileName
    FileName.fieldFixedLengths -- 0
    FileName.fixedLengthTooShortHandling -- Cut
    So the extra field in u r target structure would not populate in u r target text file.
    Cheers
    Veera

  • Dynamic file name ?

    Hi,
    I am following this blog to name the target file/directory dynamically at the runtime :
    /people/sameer.shadab/blog/2005/09/23/an-interesting-usage-of-variable-substitution-in-xi
    But I am getting this error in the CC monitoring :
    Could not process due to error: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: Unknown message header category 'interface_name ' for variable 'var1'.

    Hi,
    Try following this weblog for dynamic file name.
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    Dynamic filename come under the Dynamic configuration in moni, for your messages.
    This is the code used inside.
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    String ourSourceFileName = conf.get(key);
    return ourSourceFileName;
    That is why Dynamic configuration is coming in output.. It is a class to generate dynamic configuration file at runtime provided by SAP XI.
    Hope this will help you.
    regards
    Aashish Sinha
    PS : reward points if helpful

  • Dynamic file name in case of .txt output files

    Hi all,
    I have a query related to dynamic file name scenario.
    In case of IDOC-XI-FILE sceanrio,
    <b>Is it possible to generate .txt file name based on Plant number like</b>
    <b>%<Plantname>%_%<BusinessDay>_filename.txt</b>
    <b>Note:I have implemneted this for .xml output files but I am not able to implement it for .txt output files .</b>
    PLEASE HELP ME .
    Regards
    Prabhat

    Hi Prabhat,
    I think, the normal Dynamic File Name generation should work fine in your case also. Even if you perform Content Conversion, you can use Variable Name Substiution to create your Destination file name as, the name of the file is determined first and only then is the content converison perfromed.
    for info on content conversion, I would suggest that you go through this thread and check my reply,
    Re: Dynamic  File Name for Receiver File Adapter
    Regards,
    Bhavesh

  • Dynamic File name in File Adapter

    Hi,
    I have a requirement to pass dynamic file name in File Adapter.
    Is there any way to pass a variable for the file name attribut in file adapter.
    I am looking for some options apart from %yyMMddHHmmss%,%SEQ%...etc
    Please suggest if any of you have information on how to put values from a variable to file name attribute in file adapter
    regards
    Saiju

    Hi Saiju,
    Yes there is.
    Assign your file name to a variable, let's say 'fileName'.
    Now go to your invoke activity(for the specific fileadapter) -> Property tab-> find a property call jca.file.FileName -> in the value field assign 'fileName' variable.
    That's it... (assuming you are using 11g)
    Arik
    Edited by: Arik on Jun 27, 2012 3:12 PM

Maybe you are looking for

  • How do I populate a popup button?

    Well, I've found this snippet of code here and in various place around the 'net: tell window 1     tell menu of popup button 1         delete every menu item         repeat with catListItem in catList             make new menu item at end of menu ite

  • XML parsing failed

    SELECT UPDATEXML(Document(doc).ReformedContent, Variables(i).nodepath||'/text()', 'Jaunaa veertiiiba', 'xmlns:text="urn:oasis:names:tc:opendocument:xmlns:text:1.0"')               INTO Document(doc).ReformedContent               FROM DUAL            

  • BO Database Server Migration

    Hi all, Currently my company run the SAP BO 4.0 SP4 with Ms SQL 2005 (for repository, auditing and report data). We plan to upgrade the SQL Server into Ms SQL 2008*. Now the problem is how to we configure the BO connect to new repository and audit da

  • Help!, Ipad mini wont turn on even pressing both the home+power button

    iPad wont turn on anymore even i press the home + power button (sleep/wake), nor even if i plug it with the orig. usb to the pc and to the charger! It doesnt respond to anything!. To simplify my problem,  heres what i have done: * I let it plug into

  • Some SFX crashing Premiere Pro 5.5

    I have some SFX libraries, which are .aif files, and for some reason importing them causes Premiere to lock up and I have to force quit it. Any idea why that might be happening? These are SFX I regularly used in FCP projects. Thanks!