Read only number from string and number
I have "COM4" from my I/O. how could to read number 4 only?
Thank you
Solved!
Go to Solution.
Hello, i might need your help regarding this matter.
I'm current taking a reading from Arduino from 2 accerolmeter to Labview. X=0.02 Y=-0.03 Z=0.99 A=0.33 B=0.42 C=0.84 (Example)
But when i display them using Waveform Chart in labview, I need to use the array to count the position of the String from buffer which sometimes might be inaccurate due to the the value extracted.
I was told that i can use Search string from the beginning to allow the waveform to take in only the numeric.
Are you able to assist me regarding this issue?
Below attached are the pictures..
Attachments:
LabviewBlockDiagram.png 64 KB
LabviewFrontPanel.png 196 KB
Similar Messages
-
I am unable to purchase anything because " I do not have the correct privelages".But when I check in properties and the security tab, everything seems to be checked.
Also the read only box is checked and when I uncheck it seems ok but if I check again it is still checked.Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you. -
How to delete a READ ONLY file from Directory
Hi Friends,
how to delete a READ ONLY file from Directory , file is in my system only.
Please help me .
note: its read only file.
Thank you.
Karthik.hI,
try with this statement.
delete dataset <datasetname>.
this will definitely work.
Regards,
Nagaraj -
File Adapter - Reading 2 files from sender and one file to receiver
All - I am looking for a best solution for reading two files from sender and generating one file to the receiver.
Here is the scenario
Sender file s - A is a master file. B is a detail file; B will have a one to many records for each record of File A.. that is the relation ship between 2 files.. I am looking for a better solution to
Example
Input:
File A will have a record like "summary1 ABC 1234"
File B will have a record like "Detailfor Summary1 CDF 8679"
Output:
File C shall have a record "consolidatedofSummary&Detail ABC 1234 8679"
1) read records of master row and detail row from these 2 files
2) do the mapping to the receiver output format which it is creating for records with some harcoded values and based on the values from master and detail rows of sender file
if I can accomblish reading sender files and do the mapping to the receiver , assume that mapping to the receiver format would not be cumbersome.
please help me...
ThanksHi Gopal,
Ur approach to the interface is perfect.... Go ahead.
For selecting multiple files in source use Advanced Selection for files.. and specify the directory paths and also the file name shema...
This will fetch the 2 files into the integration engine... then u map the 2 source files to one target file(2:1 mapping).
Specify accordingly the receiver side FCC and test it end to end...
If u face any prblm post here... some1 will help u out..
Babu -
When I try to share a project to theater I get the message Your Theater could not be opened.There was a problem reading your movies from iCloud and the project does not share. Can anyone help?
Set up iMovie Theater and iCloud
In order to take full advantage of the capabilities of iMovie Theater, you must be signed in to iCloud. If you are signed in to iCloud, movies and trailers shared to iMovie Theater are automatically uploaded to iCloud. You can also turn off automatic uploading, and upload just the movies and trailers you want, or delete individual movies and trailers from iCloud. For more information about the Theater, see iMovie Theater overview.
If you sign out of your iCloud account on your Mac, all iCloud movies disappear from the Theater, but they are not deleted; the movies reappear when you sign in again. If you ever run out of space in iCloud, an alert icon appears in the top-right corner of your movie, indicating that you can’t upload new movies. For more information, click the icon. After you upgrade your iCloud storage or clear space, your movies automatically appear in iCloud again.
Hide
Set up automatic iCloud uploading
Choose Apple menu > System Preferences, and click iCloud.
Make sure you’re signed in, and then select the Documents & Data checkbox.
Click the Options button next to Documents & Data.
Make sure the iMovie checkbox is selected.
In iMovie, choose iMovie > Preferences.
Select the “Automatically upload content to iCloud” checkbox.
To turn off automatic uploading, deselect the checkbox. -
Need to Add and Remove Columns of ADF Read Only table from Backing bean
I have a scenario where I am trying to Populate TransientVO which is shown has a ADF Read Only Table in page.
I have couple of Check Boxes Based on their selection I am trying to render and hide certain Columns.
But the Issue which I am facing is only the Column Header seems to change where as the Rows and Values doesnt..
even If I apply the expression language rendering condition on the outputText inside those columns.. ..
So I am thinking to add and remove VO Attribute columns to the table from backing bean.
Need some sample code snippet or a better design to achieve this. Its kind of urgent too...having an aggressive deadline :(
Please chip in People..
Thanks in Advance .
TKTable Code..
<af:table value="#{bindings.InventoryGridTrans.collectionModel}"
var="row"
rows="#{bindings.InventoryGridTrans.rangeSize}"
emptyText="#{bindings.InventoryGridTrans.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.InventoryGridTrans.rangeSize}"
rowBandingInterval="0" id="t4"
partialTriggers="::sbcSales ::sbcUsage ::cb1">
<af:column sortProperty="Period" sortable="false"
headerText="#{bindings.InventoryGridTrans.hints.Period.label}"
id="c38">
<af:outputText value="#{row.Period}" id="ot33"/>
</af:column>
<af:column sortProperty="Past12SalesCount"
sortable="false"
headerText="#{bindings.InventoryGridTrans.hints.Past12SalesCount.label}"
id="c29"
rendered="#{backingBeanScope.IndexPageBackingBean.onUsage != true and backingBeanScope.IndexPageBackingBean.onSales == true}">
<af:outputText value="#{row.Past12SalesCount}"
id="ot40"
rendered="#{backingBeanScope.IndexPageBackingBean.onUsage != true and backingBeanScope.IndexPageBackingBean.onSales == true}"
visible="#{backingBeanScope.IndexPageBackingBean.onUsage != true and backingBeanScope.IndexPageBackingBean.onSales == true}">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.InventoryGridTrans.hints.Past12SalesCount.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="Past12UsageCount"
sortable="false"
headerText="#{bindings.InventoryGridTrans.hints.Past12UsageCount.label}"
id="c40"
rendered="#{backingBeanScope.IndexPageBackingBean.onUsage == true and backingBeanScope.IndexPageBackingBean.onSales != true}"
visible="#{backingBeanScope.IndexPageBackingBean.onUsage == true and backingBeanScope.IndexPageBackingBean.onSales != true}">
<af:outputText value="#{row.Past12UsageCount}"
id="ot47"
rendered="#{backingBeanScope.IndexPageBackingBean.onUsage == true and backingBeanScope.IndexPageBackingBean.onSales != true}"
visible="#{backingBeanScope.IndexPageBackingBean.onUsage == true and backingBeanScope.IndexPageBackingBean.onSales != true}">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.InventoryGridTrans.hints.Past12UsageCount.format}"/>
</af:outputText>
</af:column>
</af:column>
</af:table> -
External hard drive read only unless you unplug and replug in
I've got an external firewire hd (fw 400 with an adapter) connected to a MacBook Pro 2009 running OS X 10.6.2. It's been working flawlessly until recently. I'm not sure what happened and I don't think it's the result of any system upgrade or modification, but now, at startup, the drive shows up as read-only. But, if I eject, unplug, and replug it in, or eject, turn if off, and back on, it mounts correctly as read/write. Get Info on the drive shows that it should be read/write. I've tried repairing permissions and doing a repair disk from Disk Utility, but no problems are found.
Any idea on what the problem/solution is?I'm not sure where the issue is but you do you do have it running. One thing you can do to see if it's the computer or the drive is to get another FW drive and connect it and see if it works. If the Mac automatically detects it (like it should!) then that tells you it something with the original drive and if it doesn't then it's obviously something with the MBP. If you take it to an Apple Store and explain the issue they can probably provide another drive to test it out.
If it turns out to be the drive (that's my guess) then it might be a power supply problem or the FW connection, a hunch tells me it would be the power supply.
At least you are finally making progress and can use the drive though! -
Replication articles read-only in one publication and editable in another
We have many users with a mobile application
running SQL Mobile and using merge replication to get data back to the SQL 2008 R2 database. This has worked very well for many years.
We now have a requirement to have this data reported on using Reporting Services. This is where it gets messy.
Due to a limitation of Report Builder(see this blog)
we cannot provide access to users for creating their own reports. The report database is remote from the host and there is no VPN.
We hit upon the idea of creating an almost identical publication but the articles as read-only. It was only after this was done that we started having trouble with our existing mobile users.
It seems that a published article is EITHER Bi-directional OR Read-only even if they are in separate publications.
I then thought of using Transactional Publication but this too is blocked on creation with "automatic identity range support is useful only for publications that allow updating subscribers"(Merge and Transactional publication are mutually exclusive)
So in the final analysis is there a way for me to have merge replication AND some other form of SQL replication/data transfer that can have the same data transmitted readonly to a separate full SQL server database?
Your insights, ideas and advice appreciated.What you described is not possible.
You may consider to combine replication and log shipping or republish the data.
https://msdn.microsoft.com/en-us/library/ms151224.aspx?f=255&MSPPError=-2147217396
https://msdn.microsoft.com/en-us/library/ms152553.aspx?f=255&MSPPError=-2147217396 -
I downloaded and installed Firefox 4 RC using tar.bz2 so that I could still use Firefox 3.6.15 as per normal, having to start Firefox 4 using the terminal which worked great (except for many videos on different websites). When Firefox 4 was released, I suppose I was in a hurry to get it to work normal from my menu, but it kept saying that 3.6.15 was the latest version (I'll be quite embarrassed if it wasn't available for Linux users - I do love Firefox!). I did something silly, like purge Firefox from my operating system (Kubuntu 10.10) and when I reinstalled it was still 3.6.15 (it wasn't really downloading, but unpacking). Am I in too much of a hurry or is there a fix-it? I can use Firefox 4, but only through the terminal and I suspect it is slower than it should be. I would like only one version now.
First, that cannot be an iBook G4 as that machine cannot run Snow Leopard let alone Mountain Lion. To run Snow Leopard it has to be an Intel processor, not a G4. What does it show as the Model Identifier in About This Mac, More Info, System Report, Hardware, Model Identifier?
Second, if you have erased the hard drive there should not be remnants of any prior content. Even though Disk Warrior is saying nothing is wrong with the hard drive, it sounds as though there are problems. You may want to consider simply replacing the hard drive so there are no questions about faults. A good source is OWC, http://www.macsales.com where they also have on-line videos showing how to do the replacement.
Third, you could also try again to restart using the Snow Leopard DVD/CD and use Disk Utility on that install disk to erase again, and do it a couple times, then try to install. If it continues to refuse, then it sounds as though there is a fault with the hard drive. -
Files/folders created in Windows share are read-only... why and how to fix?
Client: MacBook Pro running 10.7.5
Server: Windows 7 desktop
I'm sharing a folder from the Windows 7 machine and mounting it on my Mac using Finder's "Connect to Server..." and an smb:// URI. I'm providing a user ID/password for an account on the Windows 7 box that has full control over the shared folder, via smb://userid:password@server/share.
The volume mounts properly on my desktop, can I can see files/folders there as expected. However:
If I create a folder, it's read-only. I cannot create any files inside (or even see inside), rename the folder, or delete the folder. The folder has a badge: red circle with bar.
If I create a file, it's read-only. I cannot rename it, delete it or edit it.
If I examine File Info via Finder on any of these files or folders, under Sharing & Permissions it says "You have custom access."
If I try to delete these files/folders, I get error code -8072. I can delete them from the command-line, but I can't otherwise manipulate them.
I've verified on the Windows box that the user ID I'm using has full control of the folder. I've also set it so Everyone has full control, with no difference.
This seems to have been a recent change in behaviour (a few weeks ago I was copying data to this drive, no problem), and it's driving me crazy because I can't figure out how to fix it.L145:
It is always good counsel to Repair Disk Permissions (from the internal HDD) before and after any new installation.
To change permissions in our Applications Folder:
Select Applications Folder.
Get Info (Command + i)
Go down to Ownership & Permissions
Click on arrow next to Details to expand.
Click on lock and authenticate
Owner is system
Group is admin
Change all permissions to Read & Write except Others
Other can Read only.
Please do not hesitate to post back should you have any further questions or comments.
Good luck.
cornelius -
MY Hard Drive says_"YOU CAN READ ONLY" for the OWNERSHIP AND PERMISSSIONS!
I cannot add anything to my EXTERNAL (SimpleDrivePS) hard drive. When I try to copy something to it, it says "The item cannot be moved because SimpleDrivePS cannot be modified."
Upon control-clicking this external hard drive's icon, under "Get info" it says "You can read only" for it's "Ownership and Permissions."
I have used this hard drive with Windows-based computers, but not with this new Apple yet.
What do I need to do so that I can move or copy things to this external hard drive?
Also, is there a discussion room for just general questions? - There are many little things that I wonder how to do from time to time as I am trying to become accustomed with Apple, like shortcut key for desktop, or where is control panel or link to "my computer" or other shortcut keys - things like that.Hi newsppler;
Since I have never had a disk that was formatted NTFS, I am not absolutely sure exactly how you can discover how it is formatted. I think if you look at the disk with Disk Utility that should tell you.
Yes. If you reformat you will lose everything that is currently on that disk.
To reformat open Disk Utility and then select the disk. You then click the partition tab. This will allow you to select what format you wish to use. I would suggest Mac OS Extended +
Allan -
How hide ribbon bar for read only users from custom master page.
Hi,
I want to hide the ribbon bar for read only users, on my custom master page I put inside of a SharePoint:SPSecurityTrimmedControl this div: <div id="ms-designer-ribbon">, but when I save the changes the master page does not work
anymore.
<!--MS:<SharePoint:SPSecurityTrimmedControl runat="server" AuthenticationRestrictions="AddAndCustomizePages">-->
<div id="ms-designer-ribbon">
<!--SID:02 {Ribbon}-->
<!--PS: Start of READ-ONLY PREVIEW (do not modify) --><div class="DefaultContentBlock" style="background:rgb(0, 114, 198); color:white; width:100%; padding:8px; height:64px; ">The SharePoint ribbon will be here when your file is either previewed on or applied to your site.</div><!--PE: End of READ-ONLY PREVIEW -->
</div>
<!--ME:</SharePoint:SPSecurityTrimmedControl>-->
I'll appreciate any suggestions in order to solve this.
Regards.did you close browse and open a fresh session?
also authericationrestrictions for add & customize people so its more than read...
check this one
http://msdn.microsoft.com/en-us/library/jj822366.aspx
another blog for same stuff:http://spgurunet00.web707.discountasp.net/post/2012/12/13/Hiding-SharePoint-2013-Ribbon-from-Anonymous-Users.aspx
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Extracting the xml from string and parse it
Hi all,
I have a webservice, and calling one of the methods, returns xml data but store this data in a string.
For example:
String str = keysstub.getUserLMLArray(UserID,hash, Provider, Filter.ALL,TimeStampString).getXmlResults();returns <id>123456</id><id>123457</id><id>123458</id><id>123459</id><id>123461</id>and stores it in str.
I have to take read this xml from the string and parse it accordingly to retreive the data from it.
Please suggest how i can parse this xml from the string. it will be of great help. Code snippets from anyone would be of great help
Thanks and Regards,
Shikha* Get DOM document from a string containing valid XML.
* @param string String to read XML content from.
* @param varargs Optional arguments: 1: Validating?, 2: NamespaceAware?
* @return DOM document or null if failed.
* @throws Exception if failed.
static public Document toDocument(String string, boolean... varargs) throws Exception {
Document result = null;
if (string != null) {
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
if (varargs != null && varargs.length > 0) {
int count = varargs.length;
if (count > 0) {
factory.setValidating(varargs[0]); //needs error handler
if (count > 1) {
factory.setNamespaceAware(varargs[1]);
DocumentBuilder db = factory.newDocumentBuilder();
result = db.parse(new InputSource(new StringReader(string)));
}//else: input unavailable
return result;
}//toDocument()and don't forget that the string must be valid xml, so in your example the header is missing and the first element must embrace all subsequent elements, e.g.
<?xml version="1.0"?>
<ids>
<id>123456</id><id>123457</id><id>123458</id><id>123459</id><id>123461</id>
</ids> -
Does anyone know how to remove read only status from html document header
Greetings, I am trying to insert a slideshow widget inot a dreamweaver site using a dynamic web template (DWT). I get the error message unable to insert because header is read only. Any ideas of how to fix this?
People hate it when I do this, but I'm going to get on my soap box again.
If you are not an expert or at least highly proficient at modifying XHTML and CSS code, you should NOT be working with DWT files. Until you FULLY understand how to edit and modify nested, editable, parent and child regions, you will have nothing but trouble working with DWTs.
I've been writing CSS, HTML and XHTML for seven years and I don't mess with DWTs because I'll admit I'm a control freak and I can't stand having any part of a web page locked up by another file.
Use the pre-designed pages in DW, or download a layout from one of the many sites that have them, but until you are an expert at codework, stay away from templates (dwt). You'll save yourself a lot of headaches. -
Does anyone know a simple way of creating read-only DMGs from card media?
We're looking for a simple workflow to copy/archive card media from cameras.
Can anyone recommend a utility / Droplet / Applescript that will create a read-ony DMG directly from mounted card media?
Preferably something where the disk name of the DMG can be set when its created.
Thanks!
NickThanks! That's a handy start.
I'll take a look at the command line options of hdiutil. Ultimately, we're looking for a workflow for non-terminal users so I imagine we'll wrap it up in AppleScript.
The idea is to make a simple drag+drop process for people shooting digital video to archive card media as read-only dmgs with custom reel names. Something like...
- select the card/folder (or drag onto AppleScript)
- enter name and location of dmg in file dialogue
- create and verify dmg
Cheers
Nick -
Scan from string and extract string between delimiter
Hello,
Basic questions. Is it possible with the scan from string regular expression to extract the string that are within the specified delimiters. Here is an example:
\\Name of folder 1\Name of folder 2\Name of folder 3\File Name
Can the scan from string output the following by specifying the right regular expression:
Name of folder 1
Name of folder 2
Name of folder 3
File Name
I have tried \\\\%s\\%s\\%s\\%s but the %s stops at the first white space.
Thanks,
Michel
Solved!
Go to Solution.RavensFan suggested the appropriate function for your requirement, however you can also use an alternative, which is 'Spreadsheet String To Array'.
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.
Maybe you are looking for
-
Reg: Mandatory fields updation with BAPI
Hi.. We are working on BDC using BAPI. In this if flat files contians only 4 fields and the mandatory fields in the application are seven then system needs to through error message. But with BAPI the program is updating the database without throwing
-
My external HD stopped showing up on my desktop, but shows up in my Disk Utility.. I have tried a disk verify and repair - sometimes that works and completes, sometimes it doesn't. Either way, it wont eject or mount, and still doesn't show up on desk
-
Hello folks, I am running a script from mail.app in the rules section. mail.app Version 3.2 (919/919.2) OSX is Leopard 10.5.2, Every time the script runs mail.app closes with an Ignore relaunch or send dialog. This script runs fine in Tiger. Here is
-
We moved to Ecuador and need to get in contact with Verizon to end our service. The number they provided does not work. ONE time it worked. I dont know why it doesnt now. Also the chat line is not ever available when I am on line. When I did talk
-
Kindle Fire HDX - Skype video calling, video is de...
When I use Skype on my Kindle Fire HDX 7" I get really good calls when it comes to audio calls. When it comes to video calling though, the sound is excllent as well as the video quality, but the video is 3-4 seconds delayed in contrast to the sound r