Read Table with key field - question

Hi,
Can you use the same key field more than once?
For example:
READ TABLE I_TVKWZ INTO I_TVKWZ_2 WITH KEY WERKS = '1004'
Werks = '1002'.
I get an error when trying this.
Is there an alternative?
Thanks,
John

Hi John,
try this:
DATA: begin of itab occurs 0,
        werks like mseg-werks,
        i     type i,
      end   of itab.
itab-werks = '1000'. itab-i = itab-i + 1. append itab.
itab-werks = '1000'. itab-i = itab-i + 1. append itab.
itab-werks = '2000'. itab-i = itab-i + 1. append itab.
itab-werks = '3000'. itab-i = itab-i + 1. append itab.
itab-werks = '5000'. itab-i = itab-i + 1. append itab.
itab-werks = '5000'. itab-i = itab-i + 1. append itab.
itab-werks = '7000'. itab-i = itab-i + 1. append itab.
itab-werks = '7000'. itab-i = itab-i + 1. append itab.
itab-werks = '9000'. itab-i = itab-i + 1. append itab.
itab-werks = '9000'. itab-i = itab-i + 1. append itab.
itab-werks = '9000'. itab-i = itab-i + 1. append itab.
loop at itab where werks = '1000' or werks = '9000'.
write: / itab-werks, itab-i.
endloop.
Regards, Dieter

Similar Messages

Replacemnt for read table with key binary search

as read table with
READ TABLE gt_INT_CURR_VALUE into gs_int_curr_value
           WITH KEY gs_FS_EINA_KEY BINARY SEARCH.
the statement read tabel with key is absolute in ecc 6 so how to replace it .

Hi subratt,
internal tables with header lines are obsolete and in oo context (CLASS / METHOD code) forbidden.
OK, you'd better use SORTED TABLE and FIELD-SYMBOLS to gt optimal code::
READ TABLE gt_INT_CURR_VALUE into gs_int_curr_value
WITH KEY gs_FS_EINA_KEY BINARY SEARCH.
may be replaced with
DATA:
gt_INT_CURR_VALUE_SORTED LIKE SORTED TABLE OF gs_int_curr_value
    WITH [NON-]UNIQUE KEY <fields of gs_FS_EINA_KEY>.
FIELD-SYMBOLS:
<nt_curr_value> LIKE gs_int_curr_value.
gt_INT_CURR_VALUE_SORTED = gt_INT_CURR_VALUE.
READ TABLE gt_INT_CURR_VALUE_SORTED ASSIGNING <nt_curr_value>
    WITH TABLE KEY <key1> = gs_FS_EINA_KEY-<key1> .. <keyn> = gs_FS_EINA_KEY-<keyn>.
Regards,
Clemens

How to update database table with key field?

Hello Experts,
I have a database table with following fields
MATNR   - Key
SSOUR - Key
KUNNR   - Key
MENG1
MENG2
MENG3
And this table contains records like...
MSD50001     R      1000001     5.30    2.30    5.25
MSD50002     R      1000002     5.30    2.30    5.25
MSD50003     R      1000003     5.30    2.30    5.25
MSD50005     R      1000004     5.30    2.30    5.25
MSD50004     R      1000005     5.30    2.30    5.25
I have an internal table with same fields of above database table.
MSD50001     A      1000001     5.30    2.30    5.25
MSD50002     A      1000002     5.30    2.30    5.25
MSD50003     A      1000003     5.30    2.30    5.25
MSD50005     A      1000004     5.30    2.30    5.25
MSD50004     A      1000005     5.30    2.30    5.25
MSD50006     A      1000006     5.30    2.30    5.25
I want to update the DB table with following internal table records.
If internal table records = db table records are same then Update....else insert from internal table to db table.
But here, SSOUR is key field so i am not able to use
MODIFY dbtab from itab.
It results me , entries in internal table are inserted into db table.
So i have double records.
Is there any statement which updates the key field? and if no fields in db table then insert it?
Regards
RH

hi,
u cannot update akey field.u can update only non key fields by using key field as a selection criteria.For example if u go to sm30 if u enter any table for inserting values, the key field will always be greyed out it is not succumbed to chnges.but u can insert value into ,if ur inserting and in the insert staemnet if u have key field which is already present in the table it will return sy-subrc = 4 otherwise it will insert the record and return 0.
eg for update :
UPDATE zdm_wtyprof SET upload_status = 'S'
                         WHERE spart = wa_upd-spart.
here spart is the key field and it will update the status field in the table as S.
if updated succesfully it will return 0.
SIMILARLY U CAN USE select.

Read Table with Key in a Deep Structure

Hello,
I'd like to read a table while comparing a value in a deep structure. So in the following code the key ID is a deep structure within cs_purchase_order_message-purchase_order-item-value.
For some reason code check returns no errors with the following code, but I get a short dump with a syntax error on id-value when I execute the code.
read table cs_purchase_order_message-purchase_order-item assigning <fs_xml_item> with key id-value = <fs_item>-number_int.
How do I use "with key" when the value is in a deep structure?
Thanks,
Matt

Refer to example link below:
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/read-deep-structure-736023.
Regards,
Venkat.

Read table with key doubt

Hi guys!
Please, what can i do when i use the
Read table xxxx WITH KEY tab_key = value ASSIGNING <fs>
statement and there is more than one entry with the specified selection criteria? How can i return the values to an internal table?
I need to get all the entries and i don't have the full table key.
thanks!

Hi Fabio,
An efficient way to do this is to have your table sorted by a specific key. Let's say I have a table with the feild material number.
You can do this:
data: lv_index like sy-tabix.
sort itab by material_number.
ready table itab with key material_number = yournumber
binary search.
if sy-subrc eq 0.
move sy-tabix to lv_index. " this holds the index of your first material record
now we loop at the table start at that index
loop at itab index lv_index.
perform your processing
if we come accross a different material number - exit the loop.
if itab-material_number ne yournumber.
exit.
endif.
endloop.
endif.
This way you only processes the records you are looking for.
thanks.
JB

Question about reading generic tables with keys

Hello
I'm wondering if it's possible to read a generic table with key statement:
FIELD-SYMBOLS:
    <lv_key>         TYPE zconf_key,
    <lt_data_bi>     TYPE INDEX TABLE,
    <lt_data_ai>     TYPE INDEX TABLE,
    <ls_data_bi>     TYPE any,
    <ls_data_ai>     TYPE any.
* create data types
CREATE DATA lt_data_bi TYPE (ls_node-data_table_type).
ASSIGN lt_data_bi->* TO <lt_data_bi>.
CREATE DATA lt_data_ai TYPE (ls_node-data_table_type).
ASSIGN lt_data_ai->* TO <lt_data_ai>.
* do check
LOOP AT <lt_data_ai> ASSIGNING <ls_data_ai>.
    ASSIGN COMPONENT 'KEY' OF STRUCTURE <ls_data_ai> TO <lv_key>.
    READ TABLE <lt_data_bi> WITH KEY key = <lv_key>
    ASSIGNING <ls_data_bi> BINARY SEARCH.
I receive the message: "The specified type has no structure and therefore no component called KEY" in the read statement above.
Does anyone has an idea what I can do here?
Regards,
Mathias

Mathias Glockner wrote:
>     READ TABLE <lt_data_bi> WITH KEY key = <lv_key>
In your structure ls_data_bi there is no field called KEY . please check whether you have field KEY in structure
a®s

Read internal table with key not equal to

Hi,
How can I read internal table with key not equal to some other field.
Basically in read statement we can read only fields equal to others fields.

Hi,
Test the following Code you can Use Loop at for this But not Read Table
DATA: BEGIN OF it_test OCCURS 10,
f1(4),
f2 TYPE i,
f3(2),
END OF it_test.
DATA: it_test2 LIKE STANDARD TABLE OF it_test WITH HEADER LINE.
it_test-f1 = '1000'.
it_test-f2 = 10.
it_test-f3 = 'B'.
APPEND it_test TO it_test.
it_test-f1 = '2000'.
it_test-f2 = 10.
it_test-f3 = 'A'.
APPEND it_test TO it_test.
it_test-f1 = '1000'.
it_test-f2 = 10.
it_test-f3 = 'B'.
APPEND it_test TO it_test.
it_test-f1 = '1000'.
it_test-f2 = 10.
it_test-f3 = 'A'.
APPEND it_test TO it_test.
it_test-f1 = '1000'.
it_test-f2 = 40.
it_test-f3 = 'A'.
APPEND it_test TO it_test.
LOOP AT it_test INTO it_test WHERE f3 NE 'A'.
WRITE: / it_test-f1, it_test-f2, it_test-f3.
ENDLOOP.
Kind Regards,
Faisal

Read the internal table with key

Hi friends,
decleration of internal table is :
TYPES : BEGIN OF ty_qmel,
          qmart TYPE qmel-qmart,
          qmnum TYPE qmel-qmnum,
          qmtxt TYPE qmel-qmtxt,
          strmn TYPE qmel-strmn,
          ltrmn TYPE qmel-ltrmn,
          objnr TYPE qmel-objnr,
          qmdat TYPE qmel-qmdat,
        END OF ty_qmel.
i have written the query as follows .
SELECT qmart qmnum qmtxt strmn ltrmn FROM qmel
   INTO CORRESPONDING FIELDS OF TABLE i_qmel
   FOR ALL ENTRIES IN i_qmel
   WHERE qmart EQ i_qmel-qmart.
I am getting the data into 1_qmel.
Let me know how to read this table with key...?
Thanks in advance...

Hi,
Refer this code.
*&      Form SUB_COLLECT_DATA
      text
FORM sub_collect_data.
*--Local variables
DATA : lv_count(3) TYPE c.
IF NOT it_fpltc[] IS INITIAL.
    LOOP AT it_fpltc INTO wa_fpltc.
      lv_count = wa_fpltc-fpltr+3(3).
      wa_final-ccnum = wa_fpltc-ccnum.
      wa_final-rfzei = lv_count.
      CLEAR : wa_vbrk.
      READ TABLE it_vbrk INTO wa_vbrk WITH KEY rplnr = wa_fpltc-fplnr
                                               BINARY SEARCH.
      IF sy-subrc EQ 0.
        wa_final-vbeln = wa_vbrk-vbeln.
        wa_final-bukrs = wa_vbrk-bukrs.
      ENDIF.
      APPEND wa_final TO it_final.
      CLEAR : wa_vbrk,
              wa_fpltc,
              lv_count.
    ENDLOOP.
Regards,
PRashant

Dispaly material with key field customer based on tax classification

Hello all,
Material is classified based on tax classification as products and goods.I need to dispaly these of either for some customers.
Client is saying me to use the table MLAN(Tax Classification for material).
Can anybody suggest me how can i pull the material part/service part(matnr) from the table (MLAN) based on tax classification(TAXKM) with key field customer(KUNNR) when this table does not have customer has key field in it.
Thank you,
Sirisha

Hello all/Brad,
Requirement is , i need to add and dispaly material data in a column with heading as tax classification in ALV Report for the customer.
Ex: Customer 11094 brings material 336047-B21(Product)
Customer 10973 brings material LDMSPMAP-M (Service)
Material is classified as per the tax classification as Product and Service. If tax classification is 1 then it is Product and if the tax classification is 2 then it is Service.
So i'm trying to pull the material(Product/Service) based on tax classification with customer as key field.
Customer is coming from customer master data.
So i have used MARA table which has all three fields (Customer,Material,Tax classification) to get the required information but the table does not have test data for customer.So i told my client to update mara table with customer and tax classification data.
But my client told me to use MLAN table because they have updated the data in this table.But unfortunately this table doesn't have customer field to pull the data.
So that is the reason, i put the above question in the forum.
PLease help me in solving this issue.
Thank you,
Sirisha

How to convert internal table with dynamic fields to XML

Dear all,
I met a problem like the following:
The aim is to transform the following parameter to XML
IT_FIELD stores the dynamic filed name of the internal table,with these fields, the dynamic internal can be created by cl_abap_tabledescr=>create(it_field)
IT_VALUE stores the value of the internal table dynamically created with dynamic fields.
For example
IT_FIELD =>
line1: FIELD1
line2: FIELD2
line3: FIELD3,
three lines in this internal table.
dynamically created internal table structure FIELD1 FIELD2 FIELD3
And IT_VALUE=>
1 2 3 (First line)
11 22 33
two lines of data.
Do you have any idea about how to transform the IT_VALUE to XML here? And also the transformed XML to the IT_VALUE.( we may need remember IT_FIELD here for later XML to IT_VALUE.)
Hope I describe the problem clearly.
Any inputs will be appreciated.
Edited by: Max Tang on Jan 12, 2009 3:46 PM
Edited by: Max Tang on Jan 12, 2009 4:14 PM

Hi,
you need to implement a bit of coding for that.
With the 'do varying' statement abap provides a loop over those fields. Within this loop you can build up a new internal table with one entry for each period and amount.
kind regards
Siggi
PS: I am not very familiar with CO, but I guess there will be a standard extractor for that.

Understanding logminer results -- inserting row into table with CLOB field

In using log miner I have noticed that inserts into rows that contain a CLOB (I assume this applies to other LOB type fields as well, have only tested with CLOB so far) field are actually recorded as two DML entries.
--the first entry is the insert operation that inserts all values with an EMPTY_CLOB() for the CLOB field
--the second entry is the update that sets the actual CLOB value (+this is true even if the value of the CLOB field is not being set explicitly+)
This separation makes sense as there may be separate locations that the values are being stored etc.
However, what I am tripping over is the fact the first entry, the Insert, has a RowId value of 'AAAAAAAAAAAAAAAAAA' which is invalid if I attempt to use it in a flashback query such as:
SELECT * FROM PERSON AS OF SCN #####' where RowId = 'AAAAAAAAAAAAAAAAAA'The second operation, the Update of the CLOB field, has the valid RowId.
Now, again, this makes sense if the insert of the new row is not really considered "+done+" until the two steps are done. However, is there some way to group these operations together when analyzing the log contents to know that these two operations are a "+matched set+"?
Not a total deal breaker, but would be nice to know what is happening under the hood here so I don't act on any false assumptions.
Thanks for any input.
To replicate:
Create a table with CLOB field:
CREATE TABLE DEVUSER.TESTTABLE
        ID NUMBER
       , FULLNAME VARCHAR2(50)
      , AGE NUMBER
      , DESCRIPTION CLOB
       );Capture the before SCN:
SELECT DBMS_FLASHBACK.GET_SYSTEM_CHANGE_NUMBER FROM DUAL;Insert a new row in the test table:
INSERT INTO TESTTABLE(ID,FULLNAME,AGE) VALUES(1,'Robert BUILDER',35);
     COMMIT;Capture the after SCN:
SELECT DBMS_FLASHBACK.GET_SYSTEM_CHANGE_NUMBER FROM DUAL;Start logminer session with the bracketing scn values and options etc:
EXECUTE DBMS_LOGMNR.START_LOGMNR(STARTSCN=>2619174, ENDSCN=>2619191, -
           OPTIONS => DBMS_LOGMNR.DICT_FROM_ONLINE_CATALOG + DBMS_LOGMNR.CONTINUOUS_MINE + -
           DBMS_LOGMNR.COMMITTED_DATA_ONLY + DBMS_LOGMNR.NO_ROWID_IN_STMT + DBMS_LOGMNR.NO_SQL_DELIMITER)Query the logs for the changes in that range:
SELECT
       commit_scn, xid,operation,table_name,row_id
       ,sql_redo,sql_undo, rs_id,ssn
       FROM V$LOGMNR_CONTENTS
    ORDER BY xid asc,sequence# ascResults:
2619178     0C00070028000000     START                  AAAAAAAAAAAAAAAAAA     set transaction read write
2619178     0C00070028000000     INSERT     TESTTABLE     AAAAAAAAAAAAAAAAAA     insert into "DEVUSER"."TESTTABLE" ...
2619178     0C00070028000000     UPDATE     TESTTABLE     AAAFEXAABAAALEJAAB     update "DEVUSER"."TESTTABLE" set "DESCRIPTION" = NULL ...
2619178     0C00070028000000     COMMIT                  AAAAAAAAAAAAAAAAAA     commitEdited by: 958701 on Sep 12, 2012 9:05 AM
Edited by: 958701 on Sep 12, 2012 9:07 AM

Scott,
Thanks for the reply.
I am inserting into the table over a database link.
I am using the new version of HTML Db (2.0)
HTML Db is connected to an Oracle 10 database I think, however the table I am trying to insert data into (via the database link) is in an Oracle 8 database - this is why we created a link to it as we couldn't have the HTML Db interacting with the Oracle 8 database directly due to compatibility problems (or so I've been told)
Simon

I want to create a mail merge for address labels into a table, but when I fill a table with merge fields, it ends up creating multiple entries for the same address, rather than one table full of each address.

...but when I fill a table with merge fields, it ends up creating multiple entries for the same address, rather than one table full of each address. Please help.
Thanks!

That is a quirk of Pagesthat it applies only one record per page.
There is a way around this:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=245&highlight=labels &mforum=iworktipsntrick
Peter

Subform with table with expanding fields - please help!

I am a new user of LiveCycle Designer ES and need help with a form. I've made so many changes within the form that I have now lost track and don't know where to start to fix the following two issues:
The form itself is one Master Page that needs to repeat, based on the amount of data entered. This is not happening.
Within the form is a Table with expanding fields. It is when the last field is full that I need a new page created.Also, as the table expands, it overwrites the Footer, which is a subform. The footer is set to have a top margin (.25).
Any assistance would be much appreciated. Thank you!

Looks like a cross post. see other thread here...
http://forums.adobe.com/thread/489453?tstart=0

Giving Read access to key fields explicitly

Hi sap gurus,
How to give read access to key fields explicitly

Hi and thanks for the response.
The user has 2 security groups.
The first allows them "All" access to their entity, default and the RD security class for R&D accounts.
This group means they have read/write access to all accounts, which for their own entity is acceptable.
If in the second group I give them read access to all entities then they can read all accounts for all entities.
I need to stop them from seeing all accounts except the RD accounts for the other entities.
Is this possible?

How to use Read table with out key fields

Hi Experts,
I need to retrieve the 2 internal tables data into single table.
I have 3 common fields between the 2 tables but I don't have the Key fields. Then how to use the read table in this.
Thanks in Advance.
Edited by: satish4abap on Mar 10, 2010 9:39 AM

Hi Satish,
Key fields are nothing but the common fields with which you can pick the data from the second internal table.
If you can paste your Internal table fields then we will be able to assit you better.
However, in genral scenarios you can use it as below :
In this scenario, we are putting data from 3 internal table to another single internal table.
LOOP AT T_PRGEN INTO WA_PRGEN.
       WA_FINAL-GUID_PR       = WA_PRGEN-GUID_PR.
       WA_FINAL-ATTR20A       = WA_PRGEN-ATTR20A.
       WA_FINAL-ATTR05A       = WA_PRGEN-ATTR05A.
       WA_FINAL-ATTR05B       = WA_PRGEN-ATTR05B.
       WA_FINAL-ATTR05C       = WA_PRGEN-ATTR05C. " + DG1K902190
       WA_FINAL-ATTR10A       = WA_PRGEN-ATTR10A.
    READ TABLE T_V_TCAV201 INTO WA_V_TCAV201 WITH KEY ATTRV20 = WA_PRGEN-ATTR20A BINARY SEARCH.
    IF SY-SUBRC = 0.
      WA_FINAL-TEXT1   = WA_V_TCAV201-TEXT1.    "SUBID-TEXT1
    ENDIF.
    READ TABLE T_PNTPR INTO WA_PNTPR WITH KEY GUID_PR = WA_PRGEN-GUID_PR BINARY SEARCH.
    IF SY-SUBRC = 0.
       WA_FINAL-PRVSY = WA_PNTPR-PRVSY.   "PROD NO
       WA_FINAL-GRVSY = WA_PNTPR-GRVSY.   "LOGICAL SYS GROUP
    ENDIF.
append wa_final to t_final.
endloop.

Read Table with key field - question

Similar Messages

Maybe you are looking for