Read XML with parse

Hi
accrording to my knowledge there are two type of push registry:
static registration and dynamic registration!!I don't know when we should use static registration,and when we should use dynamic registration!!And disadvantage of advantage of each type!!
THanks a lots

Hi
I belive that you should use static push registry when you know the number of the connections (for example 40 connections max). When you don't know the number of connections you should use the dynamic push registry.
Hope I could help

Similar Messages

Can't read xml with a Reader?

hi,
is it correct that the java Reader classes for reading character streams can't be used for reading XML (in one-pass)?
ie you don't know what encoding to read the file as until you've read the encoding attribute of the top level tag - and by then its too late - you'd have to start again?
(i think this is how xml parsers must work?)
thanks,
asjf

to be honest this was motivated by wanting a quick method to remove the DTD reference from an inputstream, without having to worry about whichever XML API was in use further down in the code (we've since settled on a particular API so this is no longer an issue)
I've been told there are 2 legitimate ways to do this (with the help of the parser)
A) configure the parser (parser-implementation-dependent)
B) in SAX, provide an EntityResolver
Last year I had opted for a gratuitous munge-around by manually reading the inputstream and removing the DTD reference
this year we've started working with chinese documents.. so the code doesn't work since I was using the platform-encoding rather than the xml-declared encoding
its pretty clear that (B) is the way to go but there are a few other technical hurdles to overcome first..
i'm beginning to think that /all/ quick-workarounds come back to bite you soon enough..

Reading xml with streamtokenizer

Does anyone know how to read xml tags (everthing in between < & >) with streamtokenizer, I can't find any tutorials.

I recommend xml packages. It's a bit more complex, IMO.

Read XML with different schema definitions

Hello,
I have an XML stored in a table as XMLTYPE and I have no problem to read the first part (ELMAHeader)
WITH t AS(
SELECT XMLTYPE(
q'[<?xml version = '1.0' encoding = 'UTF-8'?>
<ELMAKM xsi:noNamespaceSchemaLocation="./KM/01.00/ELMAKM_000001.xsd"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:km="http://www.zivit.de/KiStA/KiStAM/V1.0/KiStA-KiStAM-Anfrage">
   <ELMAKOM>
      <ELMAHeader ELMAKMVersion="1">
         <AuthSteuernummer>BG</AuthSteuernummer>
         <AccountID>11</AccountID>
         <KundeneigeneID>1</KundeneigeneID>
         <Verarbeitungslauf>PROD</Verarbeitungslauf>
         <ErstellungsDatum>2014-09-16</ErstellungsDatum>
         <ErstellungsZeit>11:00:27.7</ErstellungsZeit>
      </ELMAHeader>
      <ELMAVerfahren>
         <KISTA_KM_ANTW UUID="0345" OrdBegriff="SLD"
         xsi:schemaLocation="http://www.zivit.de/KiStA/KM/01.00-r000001 ./KM/01.00/ELMAKM_KISTA_000001.xsd"
         xmlns="http://www.zivit.de/KiStA/KM/01.00-r000001"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xmlns:k="http://www.zivit.de/KiStA/Std/01.00-r000001">
            <KiStAV_DL Zulassungsnummer="2"/>
            <KiStAV Zulassungsnummer="2" Name="SLD"/>
            <Antwort xsi:type="AntwortArt3" UUID="0f" KdOrdBegriff="4">
               <ReturnCode>1</ReturnCode>
               <Anlass Datum="2014-08-11" Grund="1"/>
               <PersAngabe>
                  <Person>
                     <k:NName>B</k:NName>
                     <k:VName>Y</k:VName>
                     <k:GebDt>1944-10-11</k:GebDt>
                  </Person>
                  <Adresse xsi:type="k:InlandsAdresse">
                     <k:Str>A-Str.</k:Str>
                     <k:HausNr>5</k:HausNr>
                     <k:Ort>M</k:Ort>
                     <k:Plz>8</k:Plz>
                  </Adresse>
               </PersAngabe>
            </Antwort>
         </KISTA_KM_ANTW>
      </ELMAVerfahren>
   </ELMAKOM>
</ELMAKM>]') x FROM dual
SELECT x
       ,elma.ELMAKMVersion
       ,elma.AuthSteuernummer
       ,elma.AccountID
       ,elma.KundeneigeneID
FROM    t
       ,XMLTABLE(
            '/ELMAKM/ELMAKOM/ELMAHeader'
            PASSING t.x
            COLUMNS ELMAKMVersion       VARCHAR2(8)     PATH '@ELMAKMVersion'
                   ,AuthSteuernummer    VARCHAR2(10)    PATH 'AuthSteuernummer'
                   ,AccountID           VARCHAR2(10)    PATH 'AccountID'
                   ,KundeneigeneID      VARCHAR2(10)    PATH 'KundeneigeneID'
            ) elma
But how can I read the second part(ELMAVerfahren)? I tried many selects but I get no results, e.g.
WITH ...
SELECT x
       ,elma.UUID
FROM    t
       ,XMLTABLE(
            XMLNAMESPACES(
                DEFAULT './KM/01.00/ELMAKM_KISTA_000001.xsd'
                ,'http://www.zivit.de/KiStA/KiStAM/V1.0/KiStA-KiStAM-Anfrage' AS "km"
                ,'http://www.zivit.de/KiStA/Std/01.00-r000001' AS "k"
            '/ELMAKM/ELMAKOM/ELMAVerfahren/KISTA_KM_ANTW'
            PASSING t.x
            COLUMNS UUID       VARCHAR2(8)     PATH '@UUID'
            ) elma
DB version
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
Regards
Marcus

Hi Marcus,
If you declare a default namespace using the XMLNamespaces clause, it'll apply to all unqualified elements referenced by the XQuery expression.
In your attempt, ELMAKM, ELMAKOM and ELMAVerfahren are treated as being part of the default namespace, which is wrong since those nodes are in no namespace.
To handle this kind of situations, where there are default namespace redefinitions down the tree, you have to declare a prefix :
SELECT x
       ,elma.UUID
FROM    t
       ,XMLTABLE(
           XMLNamespaces('http://www.zivit.de/KiStA/KM/01.00-r000001' as "ns0")
        , '/ELMAKM/ELMAKOM/ELMAVerfahren/ns0:KISTA_KM_ANTW'
            PASSING t.x
            COLUMNS UUID       VARCHAR2(8)     PATH '@UUID'
            ) elma

How to read XML and parse all child nodes

Here is a sample of my XML file and I want to be able to put into a grid the Server Name, User ID, Password, and then list under all Databases associated with that server.
<Servers>
<Server>
<Name>PROD_Server</Name>
<Database>CUSTOMER</Database>
<Database>LOCATION</Database>
<Database>ORDERS</Database>
<Database>RETURNS</Database>
<UserID>RSMITH></UserID>
<Password>$EWRaZ</Password>
</Server>
<Server>
<Name>WEST_Server</Name>
<Database>OPTIONS</Database>
<Database>PRICES</Database>
<UserID>THAMPTON></UserID>
<Password>$EWRyAQ</Password>
</Server>
<Server>
<Name>PASS_PLUS</Name>
<Database>AUTOMOBILES</Database>
<Database>VINNUMBERS</Database>
<Database>OWNERS</Database>
<UserID>BHARVEY></UserID>
<Password>$VRRaZ</Password>
</Server>
</Servers>
How can I do this?

Hello,
Using the xml you supplied I see a master-detail relationship going on which is best shown in at least two DataGridView controls or the master table hooked up to a BindingSourceNavigator then child rows for Database in a DataGridview or label or TextBox
controls.
The code below loads the xml data into a DataSet then uses two BindingSource components to create a master-detail setup that can be setup say in Form load event
Dim ds As New DataSet
ds.ReadXml(IO.Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "XMLFile1.xml"))
Master.DataSource = ds
Master.DataMember = ds.Tables(0).TableName
Details.DataSource = Master
Details.DataMember = ds.Relations(0).RelationName
DataGridView1.DataSource = Master
DataGridView2.DataSource = Details
Declare the BindingSource components at form level
Private Master As New BindingSource
Private Details As New BindingSource
Screenshot using two DataGridView controls.
I would suggest the above as other methods to place all columns into a DataGridView is problematic.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem. Contact via my webpage under my profile
but do not reply to forum questions.

How to read xml with deep structure into intarnal table.

Hi,
Could you pls any body provide xslt code for deep structure convert into internal table.
sample xml file:
- <ns0:CREATIONOFCONTRACT xmlns:ns0="http://BPCreationXSD.CreationOfContract">
- <CREATIONOFCONTRACTDATA>
<RequestType>L0011</RequestType>
<ApplicationId>AN-12</ApplicationId>
<LoanId>QO-22</LoanId>
- <Borrowerguarantorinfo>
<Borrowerbpno>101020</Borrowerbpno>
<Co-borrower1BPNo>101021</Co-borrower1BPNo>
<Co-borrower2BPNo>101022</Co-borrower2BPNo>
<Guarantor1BPNo>101023</Guarantor1BPNo>
<Guarantor2BPNo>101024</Guarantor2BPNo>
<Branch>New Delhi</Branch>
</Borrowerguarantorinfo>
- <Loaninfo>
<Applicationtype>Fresh</Applicationtype>
<Purposeofloan>Home Purchase</Purposeofloan>
<Securedunsecuredflag>Secured</Securedunsecuredflag>
<Loantype>HL with MRTA</Loantype>
<Loancurrency>INR</Loancurrency>
<Loanproduct>MaxiHome Loan Package</Loanproduct>
<Loanscheme>MaxiHome ZEC</Loanscheme>
<Loanamount>1500000.00</Loanamount>
<Loantenure>60</Loantenure>
<Tiered>No</Tiered>
</Loaninfo>
<Periodfrom>01/07/2009</Periodfrom>
<Periodto>16/09/2019</Periodto>
<RateType>Fixed</RateType>
<Ratecode>10.25</Ratecode>
</CREATIONOFCONTRACTDATA>
</ns0:CREATIONOFCONTRACT>

Hi Ramesh,
Thanks for the info,but I found lot of tables unfortunately I am not getting the value for radio buttons. Also I found a FM FIELD_SELECTION_CUSTOMIZE , IMPORT_DYNPRO etc which will call that screen based on profile but it will not store data any where. I found several tables like TCATS, TFAWC, TFAWF, TFAWT etc.But I am not getting the value for raduio buttons.
Thanks & Regards,
Nagaraj Kalbavi

Reading XML with Flex

Ok I've gone through Ed's awesome Flex tutorial in the wiki but for some reason I simply can't nail this one.
     <mx:Label y="10" text="Craig's Movie List" id="lblTitle" enabled="true" horizontalCenter="0" fontSize="19" fontFamily="Arial" fontWeight="bold" fontStyle="italic"/>
     <mx:HTTPService id="httpRSS" url="http://creator.zoho.com/ccmehil/rss/30/" resultFormat="e4x" />
     <mx:DataGrid id="entries" verticalCenter="11" horizontalCenter="0" width="480" dataProvider="{httpRSS.lastResult.channel.item}" height="230">
          <mx:columns>
               <mx:DataGridColumn headerText="Name" dataField="title" width="300"/>
            <mx:DataGridColumn headerText="Rating" dataField="zc:Rating" width="50"/>
            <mx:DataGridColumn headerText="Type" dataField="zc:Genre"/>
            <mx:DataGridColumn headerText="Runtime" dataField="zc:Runtime"/>
          </mx:columns>
      </mx:DataGrid>
The RSS looks like
<item>
<title>Winnie the Pooh - A New friend for Winnie Pooh</title>
<link>http://creator.zoho.com/ccmehil/view/30/record/7987000000110023/</link>
<description><b>Title</b> : Winnie the Pooh - A New friend for Winnie Pooh<br/><b>Genre</b> : Zeichentrick<br/><b>Rating</b> : G<br/><b>Director</b> : <br/><b>Year</b> : <br/><b>Runtime</b> : 65<br/><b>Status</b> : Available</description>
<guid isPermaLink="true">http://creator.zoho.com/ccmehil/view/30/record/7987000000110023/</guid>
<zc:Title>Winnie the Pooh - A New friend for Winnie Pooh</zc:Title>
<zc:Genre>Zeichentrick</zc:Genre>
<zc:Rating>G</zc:Rating>
<zc:Director></zc:Director>
<zc:Year></zc:Year>
<zc:Runtime>65</zc:Runtime>
<zc:Status>Available</zc:Status>
</item>
So why can't I access the zc elements? What am I missing?

check this documentation on how to handle namespace
http://livedocs.adobe.com/flex/201/html/wwhelp/wwhimpl/common/html/wwhelp.htm?context=LiveDocs_Book_Parts&file=dataservices_099_17.html

Validate xml with PL/SQL Parser

Hi,
i have an xml DTD into a VARCHAR2 variable and an xml document
into a CLOB, i'd like to know how to validate the xml with my
DTD using PL/SQL API for xml.
Sorry for my terrible english (i'm not english) :-)
Tank you.

Here's an example:
set serveroutput on
DECLARE
p xmlparser.parser;
d xmldom.DOMDocument;
dtd xmldom.DOMDocumentType;
v varchar2(32700);
good clob;
bad clob;
xml_parse_error exception;
pragma exception_init(xml_parse_error,-20100);
BEGIN
bad   := '<!DOCTYPE Department SYSTEM "test.dtd"><Deprtment/>';
good := '<!DOCTYPE Department
SYSTEM "test.dtd"><Department/>';
v := '<!ELEMENT Department EMPTY>';
p := xmlparser.newParser;
xmlparser.parseDTDBuffer(p,v,'Department');
xmlparser.setDoctype(p,xmlparser.getDoctype(p));
xmlparser.setValidationMode(p,TRUE);
xmlparser.parseClob(p,good);
xmlparser.parseClob(p,bad);
xmlparser.freeParser (p);
EXCEPTION
WHEN xml_parse_error THEN
     DBMS_OUTPUT.PUT_LINE(sqlerrm);
     xmlparser.freeParser (p);
END;

Problem parsing XML with schema when extracted from a jar file

I am having a problem parsing XML with a schema, both of which are extracted from a jar file. I am using using ZipFile to get InputStream objects for the appropriate ZipEntry objects in the jar file. My XML is encrypted so I decrypt it to a temporary file. I am then attempting to parse the temporary file with the schema using DocumentBuilder.parse.
I get the following exception:
org.xml.sax.SAXParseException: cvc-elt.1: Cannot find the declaration of element '<root element name>'
This was all working OK before I jarred everything (i.e. when I was using standalone files, rather than InputStreams retrieved from a jar).
I have output the retrieved XML to a file and compared it with my original source and they are identical.
I am baffled because the nature of the exception suggests that the schema has been read and parsed correctly but the XML file is not parsing against the schema.
Any suggestions?
The code is as follows:
public void open(File input) throws IOException, CSLXMLException {
    InputStream schema = ZipFileHandler.getResourceAsStream("<jar file name>", "<schema resource name>");
    DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
    DocumentBuilder builder = null;
    try {
      factory.setNamespaceAware(true);
      factory.setValidating(true);
      factory.setAttribute(JAXP_SCHEMA_LANGUAGE, W3C_XML_SCHEMA);
      factory.setAttribute(JAXP_SCHEMA_SOURCE, schema);
      builder = factory.newDocumentBuilder();
      builder.setErrorHandler(new CSLXMLParseHandler());
    } catch (Exception builderException) {
      throw new CSLXMLException("Error setting up SAX: " + builderException.toString());
    Document document = null;
    try {
      document = builder.parse(input);
    } catch (SAXException parseException) {
      throw new CSLXMLException(parseException.toString());
    }

I was originally using getSystemResource, which worked fine until I jarred the application. The problem appears to be that resources returned from a jar file cannot be used in the same way as resources returned directly from the file system. You have to use the ZipFile class (or its JarFile subclass) to locate the ZipEntry in the jar file and then use ZipFile.getInputStream(ZipEntry) to convert this to an InputStream. I have seen example code where an InputStream is used for the JAXP_SCHEMA_SOURCE attribute but, for some reason, this did not work with the InputStream returned by ZipFile.getInputStream. Like you, I have also seen examples that use a URL but they appear to be URL's that point to a file not URL's that point to an entry in a jar file.
Maybe there is another way around this but writing to a file works and I set use File.deleteOnExit() to ensure things are tidied afterwards.

HOW TO KNOW VALID XML WITH DTD ? WITHOUT PARSING ?

i am creating the xml file
i need to validate the xml with DTD to confirm is it valid or not ?
with out parsing...
could you tell me how ?
Durga

without parsing u cant do it..

*URGENT * Parsing nd Searching XML with DOM

Hi,
I am Juliana, I am a new grad, a new employee and brand new to XML, I am learning to parse XML with the XML parser for PLSQL.
Please anyone help me how to parse the following XML string so that I will display all the session and its time schedule, or if possible display only the session that I want to display.
Thank you very much for any of your help
Juliana
<Student> Id="9130099">
<Class>
<Session>A-100</Session>
<Session>A-200</Session>
<Session>A-300</Session>
<Session>A-400</Session>
<session>A-500</Session>
</Class>
<Time> At:
<At>10:30</At>
<At>12:30</At>
<At>02:30</At>
<At>04:30</At>
<At>05:30</At>
</time>
</Student>

thx for the replay
1) i thought of using xpath but wanted to know how to do it over DOM
2) i mean that the 3 <item> have other element inside like that:
<item>
<title>Implementing Service-Oriented Architectures (SOA) with the Java EE 5 SDK</title>
<link>http://java.sun.com/developer/technicalArticles/WebServices/soa3/?feed=JSC</link>
<description>This article presents concepts and language constructs needed to develop a Service-Oriented Architecture composite application in Java EE 5. It then describes an example application designed to solve a business problem.</description>
<date />
</item>and all of them have <title>, <link> etc. I want to get the same values(eg. <title>) from all the 3 <item> and not including the <title> in the begining of xml
3) i am a professional child.....joke....
try to get to your sensitive side...thats way.

Trying to use XML SAX parser with JDK2 ...

Hi,
I'm pretty new to Java.
I'm trying to write and use java sample using XML SAX parser. I try with XP and XML4J.
Each time I compile it give me a error message like
"SAX01.java:23: unreported exception java.lang.Exception; must be caught or declared to be
thrown
(new SAX01()).countBooks();
^
Note: SAX01.java uses or overrides a deprecated API.
Note: Recompile with -deprecation for details.
1 error"
For what I found, it seems that "deprecated" mean usage of old classes or methods. What should I do ?
Wait for the XML parser to be rewrite ? ....
Thank's
Constant

"SAX01.java:23: unreported exception
java.lang.Exception; must be caught or declared to be
thrown
(new SAX01()).countBooks();
^Do this
public static void main(String[] args) throws Exception {
or do this
     try
                   first part of expression?(new SAX0()).countBooks();
     catch(Exception ex)
          System.out.println("problem "+ ex);
Note: SAX01.java uses or overrides a deprecated API.
Note: Recompile with -deprecation for details.
1 error"deprecation is just a warning if there are no errors elsewhere in your program it should compile fine, but if you want to find out how to change it do this:
javac YourClassName.java -deprecation
then look in the docs for an alternative.

Persisting unexplained errors when parsing XML with schema validation

Hi,
I am trying to parse an XML file including XML schema validation. When I validate my .xml and .xsd in NetBeans 5.5 beta, I get not error. When I parse my XML in Java, I systematically get the following errors no matter what I try:
i) Document root element "SQL_STATEMENT_LIST", must match DOCTYPE root "null".
ii) Document is invalid: no grammar found.
The code I use is the following:
try {
Document document;
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
factory.setValidating(true);
factory.setNamespaceAware(true);
DocumentBuilder builder = factory.newDocumentBuilder();
document = builder.parse( new File(PathToXml) );
My XML is:
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">

<xs:element name="SQL_STATEMENT_LIST" type= "SQL_STATEMENT_ITEM"/>
<xs:complexType name="SQL_STATEMENT_ITEM">
<xs:sequence>
<xs:element name="SQL_SCRIPT" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>

<xs:simpleType name="ApplicationType">
<xs:restriction base="xs:string">
<xs:enumeration value="DawningStreams"/>
<xs:enumeration value="BaseResilience"/>
<xs:enumeration value="BackBone"/>
</xs:restriction>
</xs:simpleType>

<xs:element name="SQL_SCRIPT" type= "SQL_STATEMENT"/>
<xs:complexType name="SQL_STATEMENT">
<xs:sequence>
<xs:element name="NAME" type="xs:string"/>
<xs:element name="TYPE" type="xs:string"/>
<xs:element name="APPLICATION" type="ApplicationType"/>
<xs:element name="SCRIPT" type="xs:string"/>

<xs:element name="FOLLOWS" type="xs:string" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
and my XML is:
<?xml version="1.0" encoding="UTF-8"?>

<SQL_STATEMENT_LIST xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="http://www.dawningstreams.com/XML-Schemas/SQLStatements.xsd">
<SQL_SCRIPT>
<NAME>CREATE_PEERS_TABLE</NAME>
<TYPE>CREATION</TYPE>
<APPLICATION>DawningStreams</APPLICATION>
<SCRIPT>
CREATE CACHED TABLE PEERS (
PEER_ID VARCHAR(20) NOT NULL,
PEER_KNOWN_AS VARCHAR(30) DEFAULT ' ' ,
PRIMARY KEY ( PEER_ID )
</SCRIPT>
</SQL_SCRIPT>
<SQL_SCRIPT>
<NAME>CREATE_COMMUNITIES_TABLE</NAME>
<TYPE>CREATION</TYPE>
<APPLICATION>DawningStreams</APPLICATION>
<SCRIPT>
CREATE CACHED TABLE COMMUNITIES (
COMMUNITY_ID VARCHAR(20) NOT NULL,
COMMUNITY_KNOWN_AS VARCHAR(25) DEFAULT ' ',
PRIMARY KEY ( COMMUNITY_ID )
</SCRIPT>
</SQL_SCRIPT>
<SQL_SCRIPT>
<NAME>CREATE_COMMUNITY_MEMBERS_TABLE</NAME>
<TYPE>CREATION</TYPE>
<APPLICATION>DawningStreams</APPLICATION>
<SCRIPT>
CREATE CACHED TABLE COMMUNITY_MEMBERS (
COMMUNITY_ID VARCHAR(20) NOT NULL,
PEER_ID VARCHAR(20) NOT NULL,
PRIMARY KEY ( COMMUNITY_ID, PEER_ID )
</SCRIPT>
</SQL_SCRIPT>
<SQL_SCRIPT>
<NAME>DROP_PEER_TABLE</NAME>
<TYPE>DELETION</TYPE>
<APPLICATION>DawningStreams</APPLICATION>
<SCRIPT>
DROP TABLE PEERS IF EXISTS
</SCRIPT>
</SQL_SCRIPT>
<SQL_SCRIPT>
<NAME>DROP_COMMUNITIES_TABLE</NAME>
<TYPE>DELETION</TYPE>
<APPLICATION>DawningStreams</APPLICATION>
<SCRIPT>
DROP TABLE COMMUNITIES IF EXISTS
</SCRIPT>
</SQL_SCRIPT>
<SQL_SCRIPT>
<NAME>DROP_COMMUNITY_MEMBERS_TABLE</NAME>
<TYPE>DELETION</TYPE>
<APPLICATION>DawningStreams</APPLICATION>
<SCRIPT>
DROP TABLE COMMUNITY_MEMBERS IF EXISTS
</SCRIPT>
</SQL_SCRIPT>
<SQL_SCRIPT>
<NAME>CREATE_COMMUNITY_MEMBERS_VIEW</NAME>
<TYPE>CREATION</TYPE>
<APPLICATION>DawningStreams</APPLICATION>
<SCRIPT>
CREATE VIEW COMMUNITY_MEMBERS_VW AS
SELECT P.PEER_ID, P.PEER_KNOWN_AS, C.COMMUNITY_ID, C.COMMUNITY_KNOWN_AS
FROM PEERS P, COMMUNITIES C, COMMUNITY_MEMBERS CM
WHERE P.PEER_ID = CM.PEER_ID
AND C.COMMUNITY_ID = CM.COMMUNITY_ID
</SCRIPT>
<FOLLOWS>CREATE_PEERS_TABLE</FOLLOWS>
<FOLLOWS>CREATE_COMMUNITIES_TABLE</FOLLOWS>
</SQL_SCRIPT>
</SQL_STATEMENT_LIST>
Any ideas? Thanks !!!
J�r�me Verstrynge

Hi,
I found the solution in the following post:
Validate xml with DOM - no grammar found
Sep 17, 2003 10:58 AM
The solution is to add a line of code when parsing:
try {
Document document;
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
factory.setValidating(true);
factory.setNamespaceAware(true);
factory.setAttribute("http://java.sun.com/xml/jaxp/properties/schemaLanguage", "http://www.w3.org/2001/XMLSchema");
DocumentBuilder builder = factory.newDocumentBuilder();
document = builder.parse( new File(PathToXml) );
The errors are gone !!!
J�r�me Verstrynge

Parsing the xml with out dom parser in Oracle10g

Hi,
I need to parse the xml and create new xml with out any parsers in oracle 10g.Please help me how to do this one.

Parsing without a parser eh? Could be tricky. Maybe if you go to the XML DB forum and explain your problem over there someone can help you...
XML DB forum FAQ:
XML DB FAQ

XML C++ Parser in Solaris 2.6 could not parse with encoding UTF-16

I tried to use UTF-16 encoding in the XML C++ Parser in Solaris 2.6.
xmlinit() fails and returns error 201 - i.e.Unknown encoding. Though the ORACLE documentation has many encodings including UTF-16. Quite a few of these encodings are not working.
Can any one help about UTF-16.
Thanks
Vijay Kumar

Do you have Oracle's NLS data files?

Read XML with parse

Similar Messages

Maybe you are looking for