Reading a ALV after sorting

Hi all,
I have a Alv grid display.After the ouput is shown
suppose i have it ascending or descending.Now i want to get the sorted alv into my internal table .Bcoz when i double click a particular row it goes to the next screen with the contents of that particular line.Does any one know how to do that here i am using OOPS Alv.
regards
Ahasan

Hi,
You cannot directly get the SORTED table, but you get the SORT info and do the SORTING yourself, so that the internal table will be the same as that of the display.
The method get_frontend_layout will give you the layout info and the method <b> GET_SORT_CRITERIA </b>, will give you the sort criteria applied by the user.
The table parameter ET_SORT will have the name of the fields sorted. Then what you can do is
SORT itab BY (FIELDNAME). FIELDNAME is from the ET_SORT table.
Regards,
Ravi
Note : Please mark the helpful answers.

Similar Messages

ALV after sorting modifying problem

Hi all,
I use ALV with function.On ALV output when i sort output for some field ITAB was not modify new index key. Forexample,
Record before sorting index key 10, then after sorting it was same 10. How can i solve this problem?
Best regards,
Munur

Hi Munur,
if you want to see the same thing after sorting on the grid, save it in a layout.
or else before displaying the grid , sort the itab contents and push them on to alv.
Thanks & regards,
Sasi Kanth.

Read From Alv After Filter

Hi Experts,
I Want to tead The ALV after appliying a filter. that means.. if my alv contains 50 rows. after filter suppose it reduce to 10 lines. i want to read those 10 lines into an itab.
Please suggest asap
Regards
Sarath Satheesan

Hi Sarath,
Try this code:
DATA: lr_INTERFACECONTROLLER TYPE REF TO IWCI_SALV_WD_TABLE,
l_VALUE type If_Salv_Wd_Table=>S_Type_Param_Get_Ui_Info.
try.
lr_INTERFACECONTROLLER = wd_This->wd_CpIfc_alv_invoice( ).
catch CX_WDR_RT_EXCEPTION.
endtry.
if not lr_INTERFACECONTROLLER is initial.
l_VALUE = lr_INTERFACECONTROLLER->Get_Ui_Info(
endif.
Regards,
Shemim

Subtotal in alv after sort

i have six fields,
   based upon the sorting of all 5 fields, i should get the subtotal for sixth field in the alv list report(i have used func module alv_list_display').
How can I set the sorting sequence in IT_SORT?
and display the sub-total.

Hai
Go through the following Example Code
Refer to this similar thread.
alv Display :Total and subtotal
for sub totals you have to use
sort table.
sort-fieldname = 'VBELN'.
sort-tabname = 'ITAB'.
sort-up = 'X'.
sort-subtot = 'X'.
append sort to it_sort.
Or
Define SORT table and FIELDCATALOG table .
Data :i_field type slis_t_fieldcat_alv,
w_field like line of i_field,
i_sort type slis_t_sortinfo_alv,
w_sort like line of i_sort.
2.Grand Total
While buildingfieldcatalog,We have to set DO_SUM = 'X' for quantity field .
ex.
w_field-fieldname = 'MENGE'.
w_field-tabname = 'I_TAB'.
w_field-DO_SUM = 'X'.
append w_field to i_field.
clear w_field.
3.Subtotal
Whenever WERKS is changed Subtotal is displayed .
Build sort table .
Clear: w_sort,i_sort[].
w_sort-spos = 1.
w_sort-fieldname = 'WERKS'.
w_sort-up = 'X'.
w_sort-subtot = 'X'.
append w_sort to i_sort.
clear w_sort.
4.
Pass this I_SORT table thru REUSE_ALV_LIST_DISPLAY function module ..like fieldcatalog table.
Or
For sub totals you need to sort and pass the sort table to FM.
But for total you need to pass to field catalog like below
fieldcatalog-fieldname   = 'NETPR'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-col_pos     = 7.
fieldcatalog-outputlen   = 15.
fieldcatalog-do_sum      = 'X'.       "Display column total
fieldcatalog-datatype     = 'CURR'.
append fieldcatalog to fieldcatalog.
Thanks & regards
Sreeni

Field should not display in the subtotal row in ALV report after sorting .

we have a requirement, after sorting and subtotaling, the output in ALV is -
vbeln        amount1 amount2 amount3
123           11              12            13
123           12             13             14
123           23             25             27
133           11              12            13
133           12             13             14
133           23             25             27
Now the customer wants the ALV outpput in this fashion -
123           11              12            13
123           12             13             14
                 23             25             27    --->123 (vbeln) should not come in subtotaling row
133           11              12            13
133           12             13             14
                  23             25             27--->133(vbeln) should not come in subtotaling row

Hi,
if it helps you could create a hierachy. In this way you can define the field catalog for the lines and for the subtotal columns. The only thing is that you would always show the subtotal rows.
You have references of hierachy alvs in
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c060fcb4-2c62-2b10-d2b2-f32407a5cc6f
ALV Hierarchy
alv hierarchy
In this case it also sorts
Sorting for ALV hierarchy
I hope it helps.
Edited by: Oscar Pecharroman on Aug 2, 2010 1:13 PM

ALV - Editing a Row after Sorting - REAL HEADACHE.....

Hi,
I have a ALV table with a DropDown in one of the columns. The user can enter a value in the dropdown boxes.
Now the proble is, lets say I have SORTED the table by another column. Now the user enters a value in one of the rows of the dropdown and clicks the SAVE Button.
How do i find out, which Row the User Has entered the value ?
I tried using the table it_modified_cells in the event handler for ON_DATA_CHECK . However it gives wrong row indexes, that is if, the row number '10' is Row number '1', after sorting, and if this row is modified, then it_modified_cells table gives Row '1' as modified rather than Row '10'.
So ina nut shell, after sorting , if a row is edited, How to find out which is this row...... ?

Nithya,
Look at this thread of mine....
Re: ALV - Lead Selection of Node When FILTERS ACTIVE
I had this issue when after filtering in ALV Table, th e bound Node wtill held original records......
So is it something likeSORTING Updates the context,,,,,FILTERING does not ?
Thanks
Anand

After sorting my pictures into albums, I deleted them from the camera roll, now they're all gone. Including the ones filed in the albums. Would it be possible to get them back ?

after sorting my pictures into albums, I deleted them from the camera roll, includings the ones filed in the albums. Would it e possible to get them back ?

A photo in the Camera Roll cannot be in an album unless the photo remains in the Camera Roll. Photos in an album or not duplicated. A photo in an album includes a pointer to the original photo stored in the Camera Roll. The Camera Roll is for temporary storage. Photos/videos can and should be imported by your computer as with any other digital camera.
The Camera Roll is included with your iPhone's backup. If your iPhone's backup has been updated to include all photos that were in the Camera Roll and has not been updated since the photos were deleted, you can try restoring your iPhone from your iPhone's backup. Do not update your iPhone's backup before doing so and decline the prompt to update your iPhone's backup as the first step after selecting Restore.

I Want to tead The ALV after appliying a filter into an itab.

Hi Experts,
I Want to tead The ALV after appliying a filter into an itab.
Please suggest asap
Regards
Sarath Satheesan

DATA: lr_INTERFACECONTROLLER TYPE REF TO IWCI_SALV_WD_TABLE,
        l_VALUE type If_Salv_Wd_Table=>S_Type_Param_Get_Ui_Info.
try.
      lr_INTERFACECONTROLLER =   wd_This->wd_CpIfc_alv_invoice( ).
    catch CX_WDR_RT_EXCEPTION.
endtry.
if not lr_INTERFACECONTROLLER is initial.
    l_VALUE = lr_INTERFACECONTROLLER->Get_Ui_Info(
endif.

Possible Sequential Read Access for a Sorted Table

Hi All,
I have the following warnings in Code inspector check.
'Possible Sequential Read Access for a Sorted Table'
Kindly provide me the solution to overcome this warning message.
This is my code in BAdi : CRM_ORDER_FIELDCHECK , Method : FIELDCHECK
I am getting the above warning at
READ TABLE lt_status INTO ls_status WITH KEY status = 'E0001'
                                               user_stat_proc = 'ZITRHDQT'
                                               object_type = 'BUS2000114'.
and at
    MODIFY ct_input_field_names FROM ls_input_field_names
                                TRANSPORTING changeable
                                WHERE fieldname NE lv_field.
Please see the below code .
DATA : lt_header_guid TYPE crmt_object_guid_tab,
         lt_item_guid TYPE crmt_object_guid_tab,
         lt_order_i     TYPE crmt_orderadm_i_wrkt,
         ls_order_i     LIKE LINE OF lt_order_i,
         lt_status      TYPE crmt_status_wrkt,
         ls_status      LIKE LINE OF lt_status,
         ls_input_field_names TYPE crmt_input_field_names.
DATA : lv_header_guid TYPE crmt_fieldcheck_com-guid,
         lv_chng_no   TYPE c VALUE 'A',
         lv_field(10) TYPE c VALUE 'ACT_STATUS'.
DATA: lv_status_completed     TYPE crmt_boolean.
To Get GUID
IF is_fieldcheck_com-guid IS NOT INITIAL.
    lv_header_guid = is_fieldcheck_com-guid.
ELSE.
    lv_header_guid = is_fieldcheck_com-ref_guid.
ENDIF.
IF is_fieldcheck_com-ref_kind EQ 'A'.
    INSERT lv_header_guid INTO TABLE lt_header_guid.
    ELSE.
      SELECT SINGLE header FROM crmd_orderadm_i INTO lv_header_guid
                            WHERE guid = is_fieldcheck_com-ref_guid.
      INSERT lv_header_guid INTO TABLE lt_header_guid.
ENDIF.
*To Get the required details
CALL FUNCTION 'CRM_ORDER_READ'
    EXPORTING
      it_header_guid       = lt_header_guid
    IMPORTING
      et_status            = lt_status
    EXCEPTIONS
      document_not_found   = 1
      error_occurred       = 2
      document_locked      = 3
      no_change_authority = 4
      no_display_authority = 5
      no_change_allowed    = 6
      OTHERS               = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE lt_status INTO ls_status WITH KEY status = 'E0001'
                                               user_stat_proc = 'ZITRHDQT'
                                               object_type = 'BUS2000114'.
IF sy-subrc = 0.
    ls_input_field_names-changeable = lv_chng_no.
    MODIFY ct_input_field_names FROM ls_input_field_names
                                TRANSPORTING changeable
                                WHERE fieldname NE lv_field.
ENDIF.
ENDMETHOD.
Regards
Venkat

Hello Blake,
Try this:
READ TABLE lt_action_fld WITH KEY STATUS = '0' BINARY SEARCH.
wf_index = sy-tabix.
loop at lt_action_fld from wf_index.
if lt_action_fld-status ne '0'.
exit.
endif.
delete lt_action_fld index wf_index.
endloop.
Let us know, if this helps.
Rgds,
Raghu.

Adobe reader not working after cs5 install

adobe reader not working after cs5 install

Nobody can tell you anything without proper system info or other technical details like exact version info.
Mylenium

Row doesn't get selected after sorting

I have a table bond to a javabean data control. I have enabled multi row selection. I get some rows on the table and then I select one of those rows, after that I use the value of the selected row for some operations.
I have 3 columns, first name, lastname , email. The first 2 are sortable. If I click on the header of firstname, the information gets sorted ok (asc / desc). The problem is that after sorting, I can NOT select any rows. When I click on the row, it doesn't get highlighted, and If I try to use the value of the selected row I get a null pointer exception.
Again this is happening only after sorting. If I don't sort, it works ok.
I'm using JDEV + ADF 11.1.1.5.
This is my code
<af:table value="#{bindings.User1.collectionModel}" var="row" partialTriggers="::cb1"
rows="#{bindings.User1.rangeSize}"
emptyText="#{bindings.User1.viewable ? identityBundle.no_data_to_display : identityBundle.access_denied}"
fetchSize="#{bindings.User1.rangeSize}" rowBandingInterval="0"
id="t1" rowSelection="multiple"
selectionListener="#{AssignRolesBean.onTableSelect}"
binding="#{AssignRolesBean.searchResultsTable}"
columnStretching="last">
<af:column sortProperty="firstname" sortable="#{AssignRolesBean.columnSortable}"
headerText="#{bindings.User1.hints.firstname.label}" id="c1"
width="136">
<af:outputText value="#{row.firstname}" id="ot4"/>
</af:column>
<af:column sortProperty="lastname" sortable="#{AssignRolesBean.columnSortable}"
headerText="#{bindings.User1.hints.lastname.label}" id="c2"
width="182">
<af:outputText value="#{row.lastname}" id="ot2"/>
</af:column>
<af:column sortProperty="mail" sortable="#{AssignRolesBean.columnSortable}"
headerText="#{bindings.User1.hints.mail.label}" id="c4"
width="361">
<af:outputText value="#{row.mail}" id="ot5"/>
</af:column>
<af:column sortProperty="uid" sortable="false"
headerText="#{bindings.User1.hints.uid.label}" id="c3"
visible="false">
<af:outputText value="#{row.uid}" id="ot3"/>
</af:column>
</af:table>
I have a selection listener only, I don't have a sort listener.
My bean;
AssignRolesBean
public void onTableSelect(SelectionEvent selectionEvent) {
GenericTableSelectionHandler.makeCurrent(selectionEvent);
My makeCurrent method
public static void makeCurrent( SelectionEvent selectionEvent){
RichTable _table = (RichTable) selectionEvent.getSource();
CollectionModel tableModel = (CollectionModel) table.getValue();
JUCtrlHierBinding adfTableBinding = (JUCtrlHierBinding) tableModel.getWrappedData();
DCIteratorBinding tableIteratorBinding = adfTableBinding.getDCIteratorBinding();
Object selectedRowData = table.getSelectedRowData();
JUCtrlHierNodeBinding nodeBinding = (JUCtrlHierNodeBinding) selectedRowData;
Key rwKey = nodeBinding.getRowKey();
tableIteratorBinding.setCurrentRowWithKey( rwKey.toStringFormat(true));
SHOULD I IMPLEMENT A SORT LISTENER FOR THIS TABLE IN ORDER TO HANDLE ROW SELECTION PROPERLY AFTER SORTING?
Is there a guideline for handling row selection after sorting?
Thanks

I have a table bond to a javabean data control. I have enabled multi row selection. I get some rows on the table and then I select one of those rows, after that I use the value of the selected row for some operations.
I have 3 columns, first name, lastname , email. The first 2 are sortable. If I click on the header of firstname, the information gets sorted ok (asc / desc). The problem is that after sorting, I can NOT select any rows. When I click on the row, it doesn't get highlighted, and If I try to use the value of the selected row I get a null pointer exception.
Again this is happening only after sorting. If I don't sort, it works ok.
I'm using JDEV + ADF 11.1.1.5.
This is my code
<af:table value="#{bindings.User1.collectionModel}" var="row" partialTriggers="::cb1"
rows="#{bindings.User1.rangeSize}"
emptyText="#{bindings.User1.viewable ? identityBundle.no_data_to_display : identityBundle.access_denied}"
fetchSize="#{bindings.User1.rangeSize}" rowBandingInterval="0"
id="t1" rowSelection="multiple"
selectionListener="#{AssignRolesBean.onTableSelect}"
binding="#{AssignRolesBean.searchResultsTable}"
columnStretching="last">
<af:column sortProperty="firstname" sortable="#{AssignRolesBean.columnSortable}"
headerText="#{bindings.User1.hints.firstname.label}" id="c1"
width="136">
<af:outputText value="#{row.firstname}" id="ot4"/>
</af:column>
<af:column sortProperty="lastname" sortable="#{AssignRolesBean.columnSortable}"
headerText="#{bindings.User1.hints.lastname.label}" id="c2"
width="182">
<af:outputText value="#{row.lastname}" id="ot2"/>
</af:column>
<af:column sortProperty="mail" sortable="#{AssignRolesBean.columnSortable}"
headerText="#{bindings.User1.hints.mail.label}" id="c4"
width="361">
<af:outputText value="#{row.mail}" id="ot5"/>
</af:column>
<af:column sortProperty="uid" sortable="false"
headerText="#{bindings.User1.hints.uid.label}" id="c3"
visible="false">
<af:outputText value="#{row.uid}" id="ot3"/>
</af:column>
</af:table>
I have a selection listener only, I don't have a sort listener.
My bean;
AssignRolesBean
public void onTableSelect(SelectionEvent selectionEvent) {
GenericTableSelectionHandler.makeCurrent(selectionEvent);
My makeCurrent method
public static void makeCurrent( SelectionEvent selectionEvent){
RichTable _table = (RichTable) selectionEvent.getSource();
CollectionModel tableModel = (CollectionModel) table.getValue();
JUCtrlHierBinding adfTableBinding = (JUCtrlHierBinding) tableModel.getWrappedData();
DCIteratorBinding tableIteratorBinding = adfTableBinding.getDCIteratorBinding();
Object selectedRowData = table.getSelectedRowData();
JUCtrlHierNodeBinding nodeBinding = (JUCtrlHierNodeBinding) selectedRowData;
Key rwKey = nodeBinding.getRowKey();
tableIteratorBinding.setCurrentRowWithKey( rwKey.toStringFormat(true));
SHOULD I IMPLEMENT A SORT LISTENER FOR THIS TABLE IN ORDER TO HANDLE ROW SELECTION PROPERLY AFTER SORTING?
Is there a guideline for handling row selection after sorting?
Thanks

[Urgent] How to let FileAdapter to read next file after a customized period

Dear friends,
We are using SOA Suite 11.1.1.5 and use FileAdapter in BPEL Process to read files.
The file adapter in BPEL Process need to handle 14 inbound different files every batch time. And we want to let File Adapter to start reading next file after every 5 minutes. How can we achive this?
We tried the MinimumAge and SingleThreadModel properties, but seems no use.
Thank you in advance.
Regards,
Tony

Hi Tony,
I think this can help you. Set the following JCA property in File/FTP Adapter .jca file. This will restrict the max no. of files to be read every polling cycle. Set the polling frequency to 5 mins.
<property name="MaxRaiseSize" value="1"/>Let me know if any problems.
Regards,
Neeraj Sehgal

Reader X crashes after 30 secs with Protected mode enabled

Having just deployed Reader X to over 100 PC's via group policy I'm a little dishartened to find that Reader X crashes after 30 secs of being open when protected mode is enabled.
Current setup is as followed:-
Clients are XP SP3, Vista SP2 & Win7 (all crash)
Server 2003 R2 domain
Reader X deployed via MSI using GPO with a transform created using the Reader X customization wizard (only set to disable updates as I'll push these out via GPO also when available).
The problem occurs with standard domain users (doesn't happen if you use an admin account to login and run Reader X), once you disable the setting for "enable Protected mode at start up" and restart Reader X it doesn't crash. I've been reading also that the protected mode creats a sandbox environment that some AV products are currently having issues with, so I've also tested by removing my AV on a test client rebooting and running Reader X with protected mode enabled, the Pc will still crash, so that rules out my AV product.
After each crash the client logs an event in the application log
Event ID: 1000
Aource Application error
Description:
Faulting application AcroRd32.exe, version 10.0.0.396, time stamp 0x4cc5e97b, faulting module WININET.dll, version 8.0.6001.18999, time stamp 0x4ccfa98f, exception code 0xc0000005, fault offset 0x0002387b, process id 0xd54, application start time 0x01cbc2ec89ab4cba.
Anyone any ideas on why this happens?

I am seeing the same problem on Vista SP2 32-bit. I enabled the Protect Mode log and see a bunch of errors relating to registry entries. I am running Adobe Reader X 10.0.1 as a standard privilege user. The problem has been intermittent. Repeated attempts to open the same PDF will result in Adobe Reader X failing after 45 seconds, then the next attempt will work fine. I have had situations where an Adobe Reader X instance has been open for hours but a new instance crashed. I have not been able to identify any trigger that might explain the difference in behavior. The problem has gone away since disabling Protect Mode.
>>>
[05:31/19:10:43] Adobe Reader Protected Mode Logging Initiated
[05:31/19:10:43] NtCreateKey: STATUS_ACCESS_DENIED
[05:31/19:10:43] real path: \REGISTRY\MACHINE\Software\Adobe
[05:31/19:10:43] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[05:31/19:10:43] NtCreateKey: STATUS_ACCESS_DENIED
[05:31/19:10:43] real path: \REGISTRY\MACHINE\SOFTWARE\Adobe
[05:31/19:10:43] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[05:31/19:10:44] OpenEvent: STATUS_ACCESS_DENIED
[05:31/19:10:44] name: MSFT.VSA.COM.DISABLE.5900
[05:31/19:10:44] Consider modifying policy using these policy rules: EVENTS_ALLOW_ANY
[05:31/19:10:44] OpenEvent: STATUS_ACCESS_DENIED
[05:31/19:10:44] name: MSFT.VSA.IEC.STATUS.6c736db0
[05:31/19:10:44] Consider modifying policy using these policy rules: EVENTS_ALLOW_ANY

Some words are not highlighting on my read-aloud epubs after updating IOS 6.0.1 and iBooks 3.0.1

Some words are not highlighting on my read-aloud epubs after updating IOS 6.0.1 and iBooks 3.0.1 on both my iPad 2 and iPad 3. They are working absolutely fine earlier. I even updated the latest version of iBooks 3.0.2 but nothing is working. Can anybody help?

Hi spati,
I ran into this problem as well. Seems like something funky going on with iBooks 3. Anyways, I had to tweak my read-aloud clip starts in the smil. Where the word was not highlighting, I added a few milliseconds to the timing until the word started highlighting again. Not the most ideal solution, and not sure what exactly causes it because 90% of the words were just fine, but it seemed to fix the problem. Note prior to the problem happening, I had all my clip start timings = clip end timings for the previous word, so there were no gaps.
Regards,
Tim

Problem in deleting Rows of JTable after sorting it

Hi all,
I'm getting problems in Removing Row(s) after sorting a JTable.
Please find the code snippets at this URL. Thanks for your time...
http://forum.java.sun.com/thread.jsp?forum=31&thread=459736&start=15&range=15&hilite=false&q=

Hi Abhijeet,
I tried it the way you said using
     wdContext.nodeBirhtday_List().nodeItab().moveFirst();
     //     loop backwards to avoid index troubles
     for (int i = n - 1; i >= 0; --i)
          current_date = wdContext.nodeBirhtday_List().nodeItab().currentItabElement().getGbdat().getDate();
          current_month = wdContext.nodeBirhtday_List().nodeItab().currentItabElement().getGbdat().getMonth();
          if (( current_date != date_today ) && ( current_month != month_today ))
               wdContext.nodeBirhtday_List().nodeItab().removeElement(wdContext.nodeBirhtday_List().nodeItab().
                              getElementAt(i));
          wdContext.nodeBirhtday_List().nodeItab().moveNext();
It adds records...
According to Valerys Solution, the IPrivate<CustomController> doesnt show me the required nodes. and gives me 'Unable to resolve' error.
Can you please suggest where I am going wrong
Regards
Abdullah

Reading a ALV after sorting

Similar Messages

Maybe you are looking for