Reading data file(txt) present in a file system from a package deployed in SSISDB

Hi,
I am trying to create and later read a data file from a package deployed in SSISDB, but it is not reading it while it is successfully creating the file. The same package when run from the file system package, runs successfully. Generating ispac and deploying
in SSISDB is running for infinite time. Any idea? Is it a permission issue?
Thanks
Ayush

Hi Ayush,
If I understand correctly, you directly execute a package from the file system source via Execute Package Utility, it works fine. When you right-click on a package under Integration Services Catalog \ SSISDB \ <Folder name> \ Projects \ <Project
name> \ Packages \ <Package name> and select Execute... to run a package in SQL Server Management Studio, it fails.
When we execute a package under Integration Services Catalog, the package will run under the credentials used to connect to SQL Server Management Studio. Please note that we need run the package using Windows Authentication.
As to your issue, please make sure the account connects to SQL Server Management Studio has required permissions to access the file folder and file outside the SSIS package.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

How to delete file systems from a Live Upgrade environment

How to delete non-critical file systems from a Live Upgrade boot environment?
Here is the situation.
I have a Sol 10 upd 3 machine with 3 disks which I intend to upgrade to Sol 10 upd 6.
Current layout
Disk 0: 16 GB:
/dev/dsk/c0t0d0s0 1.9G /
/dev/dsk/c0t0d0s1 692M /usr/openwin
/dev/dsk/c0t0d0s3 7.7G /var
/dev/dsk/c0t0d0s4 3.9G swap
/dev/dsk/c0t0d0s5 2.5G /tmp
Disk 1: 16 GB:
/dev/dsk/c0t1d0s0 7.7G /usr
/dev/dsk/c0t1d0s1 1.8G /opt
/dev/dsk/c0t1d0s3 3.2G /data1
/dev/dsk/c0t1d0s4 3.9G /data2
Disk 2: 33 GB:
/dev/dsk/c0t2d0s0 33G /data3
The data file systems are not in use right now, and I was thinking of
partitioning the data3 into 2 or 3 file systems and then creating
a new BE.
However, the system already has a BE (named s10) and that BE lists
all of the filesystems, incl the data ones.
# lufslist -n 's10'
boot environment name: s10
This boot environment is currently active.
This boot environment will be active on next system boot.
Filesystem fstype device size Mounted on Mount Options
/dev/dsk/c0t0d0s4 swap 4201703424 - -
/dev/dsk/c0t0d0s0 ufs 2098059264 / -
/dev/dsk/c0t1d0s0 ufs 8390375424 /usr -
/dev/dsk/c0t0d0s3 ufs 8390375424 /var -
/dev/dsk/c0t1d0s3 ufs 3505453056 /data1 -
/dev/dsk/c0t1d0s1 ufs 1997531136 /opt -
/dev/dsk/c0t1d0s4 ufs 4294785024 /data2 -
/dev/dsk/c0t2d0s0 ufs 36507484160 /data3 -
/dev/dsk/c0t0d0s5 ufs 2727290880 /tmp -
/dev/dsk/c0t0d0s1 ufs 770715648 /usr/openwin -
I browsed the Solaris 10 Installation Guide and the man pages
for the lu commands, but can not find how to remove the data
file systems from the BE.
How do I do a live upgrade on this system?
Thanks for your help.

Thanks for the tips.
I commented out the entries in /etc/vfstab, also had to remove the files /etc/lutab and /etc/lu/ICF.1
and then could create the Boot Environment from scratch.
I was also able to create another boot environment and copied into it,
but now I'm facing a different problem, error when trying to upgrade.
# lustatus
Boot Environment           Is       Active Active    Can    Copy
Name                       Complete Now    On Reboot Delete Status
s10                        yes      yes    yes       no     -
s10u6                      yes      no     no        yes    -        Now, I have the Solaris 10 Update 6 DVD image on another machine
which shares out the directory. I mounted it on this machine,
did a lofiadm and mounted that at /cdrom.
# ls -CF /cdrom /cdrom/boot /cdrom/platform
/cdrom:
Copyright                     boot/
JDS-THIRDPARTYLICENSEREADME   installer*
License/                      platform/
Solaris_10/
/cdrom/boot:
hsfs.bootblock   sparc.miniroot
/cdrom/platform:
sun4u/   sun4us/ sun4v/Now I did luupgrade and I get this error:
# luupgrade -u -n s10u6 -s /cdrom
ERROR: The media miniroot archive does not exist </cdrom/boot/x86.miniroot>.
ERROR: Cannot unmount miniroot at </cdrom/Solaris_10/Tools/Boot>.I find it strange that this sparc machine is complaining about x86.miniroot.
BTW, the machine on which the DVD image is happens to be x86 running Sol 10.
I thought that wouldn't matter, as it is just NFS sharing a directory which has a DVD image.
What am I doing wrong?
Thanks.

How to read .dat files that are hidden?

Is it possible to read .dat files that are set to hidden? 'cause what i did was i created a .dat file and set its attributes to hidden and my Read file code cannot read hidden files.
here's my Read file code:
Scanner read=new Scanner(FileReader("C:\password.dat"));
and another thing, how do you Write a .dat file that is hidden too? 'cause my password.dat file needs to be updated.
here's my Write file code:
PrintWriter write=new PrintWriter("C:\password.dat");
thank for the help.

There should not be any problems opening up hidden files. Your problem is probably elsewhere (for example, you didn't escape the backslash, so what you posted is not your code).

Read-only file access from network volume

I get an read-only file access from network volume problem while sharing a drive from Snow Leopard to a Tiger install. Most of files were opening well, but *.fp7 (FileMaker) and *.xls (Excel) files won't open dealing with a read-only error.
As descibed in the last post of http://discussions.apple.com/thread.jspa?threadID=1406977 the client have the same share name of the server. Renomming it resolved the error!
Thanks!

right then, as it looks like I'm talking to myself....
I have just wiped clean the Macbook Pro.
I installed Leopard from scratch, then installed Office 2008.
Logged back onto the network share, and the read-only error came up again, ONLY in Excel.
bugger.
Did the same thing with my Macbook and all is fine.
Copy the file to the local hard drive, opens ok.
I then copied the file to another Mac on the network.
mmmm, opens fine.
what's the difference....
mmmm, the machine it opens fine from is running 10.4
the machine which hosts all the data is running 10.3.9
could this be the problem.
Just done a software update check on the 10.3 machine and there are some security updates that need doing.
Going to run that now and see what happens, otherwise I think the iMac running 10.3.9 is going to need to come up to 10.4 and fingers crossed this will solve it.

Solaris 10 - After installation read only file system

Dear All,
I have installed the Solaris 10 on my x86 system with out any problem. The installation was completed successfully. I have followed the installation instructions that are mentioned in the following link.
http://docs.sun.com/app/docs/doc/817-0544/6mgbagb19?a=view
I am facing a different problem. I am not able to create even a single file / sub-directory on any of the existing directories. It always says READ ONLY file system can not create firl / directory.
Please help me how to resolve this issue.
Thanks in advance.
Regards,
Srinivas G

What do you get for 'svcs -xv' output?
Darren

Crashes and read-only file systems

Notice: I apolgize for the long post, I've tried to be as thorough as possible. I have searched everywhere for possible solutions, but things I've found end up being temporary workarounds or don't apply to my situation. Any help, even as simple as, "have you checked out XYZ log, it's hidden here", would be greatly appreciated. Thanks
I'm not sure what exactly caused the issues below, but they did start to happen within a day of running pacman -Syu. I hadn't run that since I first installed Arch on December 2nd of this year.
Setup:
Thinkpad 2436CTO
UEFI/GPT
SSD drive
Partitions: UEFISYS, Boot, LVM
The LVM is encrypted and is broken up as: /root, /var, /usr, /tmp, /home
All LVM file systems are EXT4 (used to have /var and /tmp as ReiserFS)
The first sign that something was wrong was gnome freezing. Gnome would then crash and I'd get booted back to the shell with all filesystems mounted as read-only. I started having the same issues as this OP:
https://bbs.archlinux.org/viewtopic.php?id=150704
At the time, I had /var and /tmp as ReiserFS, and would also get reiserfs_read_locked_inode errors.
When shutting down (even during non-crashed sessions) I would notice this during shutdown:
Failed unmounting /var
Failed unmounting /usr
Followed by a ton of these:
device-mapper: remove ioctl on <my LVM group> failed: Device or resource busy
Nother of these errors had ever appeared before.
After hours of looking for solutions (and not finding any that worked) I was convinced (without any proof) that my Reiser file systems were corrupt and so I reformatted my entire SSD and started anew - not the Arch way, I know I set all logical volumes as EXT4.
After started anew, I noticed
device-mapper: remove ioctl on LVM_SysGroup failed: Device or resource busy
was still showing up, even with just a stock Arch setup (maybe even when powering off via Arch install ISO, don't remember). After a lot of searching, I found that most people judged it a harmless error, so I ignored it and continued setting up Arch.
I set up Gnome and a basic LAMP server, and everything seemed to work for a couple of hours. Soon after, I got the same old issues back. The System-journald issue came back and per the workaround on https://bbs.archlinux.org/viewtopic.php?id=150704 and a couple other places, I rotated the journals and stopped journald from saving to storage. That seemed to stop THOSE errors from at least overwhelming the shell, but I would still get screen freezes, crashes, and read-only file systems.
I had to force the laptop to power off, since poweroff/reboot/halt commands weren't working (would get errors regarding the filesystems mounted as read-only).
I utilized all disk checking functions possible. From running the tests (SMART test included) that came as part of my laptop's BIOS to full blown fsck. All tests showed the drive was working fine, and Fsck would show everything was either clean, or
Clearing orphaned inode ## (uid=89, gid=89, mode=0100600, size=###
Free blocks count wrong (###, counted=###)
Which I would opt to fix. Nothing serious, though.
I could safely boot back into Arch and use the system fine until the system decides to freeze/crash and do the above all over again.
The sure way of recreating this for me is to run a cron job on a local site I'm developing. After a brief screen freeze (mouse still moveable but everything is otherwise unreponsive) I'll systemctl status mysqld.service and notice that mysqld went down.
It seems that it's at this point my file systems are mounted as read only, as trying to do virtually anything results in:
unable to open /var/db/sudo/...: Read-only file system
After some time, X/Gnome crashes and I get sent back to shell with
ERROR: file_stream_metrics.cc(37)
RecordFileError() err = 30 source = 1 record = 0
Server terminated successfully (0)
Closing log file.or_delegate.h(30)] sqlite erro1, errno 0: SQL logic error or missing database[1157:1179
rm: cannot remove '/tmp/serverauth.teuroEBhtl': Read-only file system
Before all this happened, I was using Arch just fine for a few weeks. I wiped the drives and started anew, and this still happens with just the minimal number of packages installed.
I've searched for solutions to each individual problem, but come across a hack that doesn't solve anything (like turning off storing logs for journal), or the solution doesn't apply to my case.
At this point, I'm so overwhelmed I'm not even sure where exactly to pick up figuring this issue out.
Thanks in advance for any help

Did this occur when you booted from the live/install media?
What is your current set up? That is, partitions, filesystems etc. I take it you have not yet reinstalled X but are in the default CLI following installation?
If turning off log storage didn't help, reenable it so that you may at least stand a chance of finding something useful.
What services, if any, are you running? What non-default daemons etc.?
Does it happen if you keep the machine off line?
Have you done pacman -Syu since installation and dealt with any *.pacnew files?
Last edited by cfr (2012-12-26 22:17:57)

(Read-only file system) ,EXT3-fs error (device sda6) in start_transaction, FOR MY MCS7825I3-K9-CMC1

I got this problem for my cucm version System version: 7.0.2.20000-5
Product Part Number: MCS7825I3-K9-CMC1
java.io.FileNotFoundException: /var/log/active/platform/log/cli.bin (Read-only file system)
log4j:ERROR No output stream or file set for the appender named [CLI_LOG].
EXT3-fs error (device sda6) in start_transaction: Journal has aborted   SeverityMatch - Critical kernel: EXT3-fs error (device sda6) in start_transaction: Journal has aborted   SeverityMatch - Critical kernel: EXT3-fs error (device sda6) in
Any Advice to solve this issue ?
Kind Regards
Mohammed khamis
java.io.FileNotFoundException: /var/log/active/platform/log/cli.bin (Read-only file system)
        at java.io.RandomAccessFile.open(Native Method)
        at java.io.RandomAccessFile.<init>(RandomAccessFile.java:212)
        at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.restoreIndex(c                                                                            iscoRollingFileAppender.java:100)
        at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.setFile(ciscoR                                                                            ollingFileAppender.java:43)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.                                                                            java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces                                                                            sorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at org.apache.log4j.config.PropertySetter.setProperty(PropertySetter.jav                                                                            a:196)
        at org.apache.log4j.config.PropertySetter.setProperty(PropertySetter.jav                                                                            a:155)
        at org.apache.log4j.xml.DOMConfigurator.setParameter(DOMConfigurator.jav                                                                            a:530)
        at org.apache.log4j.xml.DOMConfigurator.parseAppender(DOMConfigurator.ja                                                                            va:182)
        at org.apache.log4j.xml.DOMConfigurator.findAppenderByName(DOMConfigurat                                                                            or.java:140)
        at org.apache.log4j.xml.DOMConfigurator.findAppenderByReference(DOMConfi                                                                            gurator.java:153)
        at org.apache.log4j.xml.DOMConfigurator.parseChildrenOfLoggerElement(DOM                                                                            Configurator.java:415)
        at org.apache.log4j.xml.DOMConfigurator.parseRoot(DOMConfigurator.java:3                                                                            84)
        at org.apache.log4j.xml.DOMConfigurator.parse(DOMConfigurator.java:783)
        at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java                                                                            :666)
        at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java                                                                            :616)
        at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java                                                                            :584)
        at org.apache.log4j.xml.DOMConfigurator.configure(DOMConfigurator.java:6                                                                            87)
        at sdMain.main(sdMain.java:511)
java.lang.NullPointerException
        at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.updateIndex(ci                                                                            scoRollingFileAppender.java:117)
        at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.nextFileName(c                                                                            iscoRollingFileAppender.java:92)
        at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.append(ciscoRo                                                                            llingFileAppender.java:74)
        at org.apache.log4j.AppenderSkeleton.doAppend(AppenderSkeleton.java:221)
        at org.apache.log4j.helpers.AppenderAttachableImpl.appendLoopOnAppenders                                                                            (AppenderAttachableImpl.java:57)
        at org.apache.log4j.Category.callAppenders(Category.java:187)
        at org.apache.log4j.Category.forcedLog(Category.java:372)
        at org.apache.log4j.Category.info(Category.java:674)
        at sdMain.main(sdMain.java:525)
log4j:ERROR No output stream or file set for the appender named [CLI_LOG].
   Welcome to the Platform Command Line Interface
admin:java.io.FileNotFoundException: /var/log/active/platform/log/cli.bin (Read-only f                                                                            ile system):java.io.FileNotFoundException: /var/log/active/platform/log/cli.bin (Read-only f                                                                            ile system)

Hello
Thanks Manish .
I found many articles in cisco which says that this error is related to the bug which need firmware upgrade , but I don't have support from cisco because EOS.
https://supportforums.cisco.com/document/49511/updated-16-february-2011-ibm-7816-i4-782x-i4-filesystem-errors
Solution
The file-system going read-only issue which has recently been affecting server models MCS-7816-I4, MCS-7825-I4, and MCS-7828-I4 (or their IBM equivilants) in the field is addressed by CSCti52867 - "IBM 7816-I4 and 782x-I4 READONLY file system".
The fix for CSCti52867 is now available and requires the application of two patch files. Install both of these patch files in the order listed below.
1. First install ciscocm.ibm-diskex-1.0.cop.sgn
     The Readme file ciscocm.ibm-diskex-1.0.cop.sgn includes installation instructions for this .cop.sgn.
     Make sure to only install this utility when show hardware CLI output indicates the array is in a healthy state.
     If your server has never had the filesystem go readonly then this step is optional.
2. Next install Cisco-HDD-FWUpdate-3.0.1-I.ISO .
     The Readme file Cisco-HDD-FWUpdate-3.0.1-I.Readme.pdf includes installation instructions for this ISO.
     This installer is completely independant of the OS installed on the server.
Note: Installing the FWUpdate v3.0(1) or later will get you firmware with the fix for this defect. It is always recommended that you apply the latest FWUCD available for your server.
Refer to the Release Note of CSCti52867 and the Readme file for each of the above mentioned patch files for more details.
Symptoms
The file system goes READONLY, then CUCM services may go down, the server may become "unresponsive" meaning that it is not possible to ssh into the server, login to the console, or web into the server although it may still respond to pings.
Traces from all services stop writing (including syslog)
You see the following error on the server console
EXT3-fs error (device sda6) in start_transaction: Jornal has aborted

Help with a fcpx library that is locked "could not be opened. Read-only file system"

Hi all,
I recently moved all my fcpx projects/events to a new Harddrive - I thought I did this correctly by copying/duplicating all projects/events from within FCPX.
When I last used FCPX all the projects/events were there - no issues. Also, when I look at package contents - everything is still there in terms of events and file sizes.
All the library files are on an external hard drive, on an encrypted disk image. Now a week later I have tried to open FCPX and I get the following error
"The document “MND_Z_FCPX” could not be opened. Read-only file system" and nothing will open.
Have checked permissions - these all seem in order. OSX is10.9.5
Any suggestions as to what might be the issue?
Thanks in advance.
R

the permissions themselves look ok - they have my two computer profiles as read/write. I also note that on some occasions the library has opened in my other Computer profile, but not in the one that I want it to open.
So I think you're right, there is something with permissions happening here. I keep a work and personal computer profile.
Don't know how it happened - but the volume is definitely Read Only - even though I've created a Read/Write permissions for it

[SOLVED] /bin/tar: Cannot utime: Read-only file system

While doing a tar backup on my servers, I get this error:
/bin/tar: /usr/local/bin/sendEmail: Cannot utime: Read-only file system
The error happens on all files in /usr that I'm trying to backup. I know why the error is happening -- I deliberately mount /usr as read-only.
I'd like to know why tar is trying to "utime" my files and how I can stop that behaviour if possible?
This is my tar command:
tar cjf /mnt/backup/backup.tar.bz2 --label='backup_090116' --atime-preserve --no-wildcards-match-slash --files-from=/root/backup.include --exclude-from=/root/backup.exclude
TIA
Last edited by fukawi2 (2009-01-17 07:53:02)

Isn't it quite pointless to preserve timestamps on files from a filesystem on which timestamps aren't modified? Maybe tar tries to update the timestaps prior to archiving the file and is that giving troubles.

Read only file system and Problems witth pacman -S

Hi im a newbie at Arch, and i have 2 problems...
1) When I log in as a root user i can't modify any of the configuration files cause i only have a " Read only file System" does anyone know how I can change this cause im sick of using my live cd to modify the files i need to change..
2) I have problems with pacman -S it says " Unable to lock database if you're sure pacman is not already running you can remove /tmp/pacman.lck"
when i do rm /tmp/pacman.lck it says that it can't be done cause the file doesn't exist.. and Im sure that my dhcp and dns is working fine... (just in case of any wonder)
Well if someone could help me i really would appreciate it
thanks

# <file> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults    0 0
/dev/cdrom /mnt/cd iso9660 ro,user,noauto,unhide 0 0
/dev/dvd /mnt/dvd udf ro,user,noauto,unhide 0 0
/dev/fd0    /mnt/fl vflat user,noauto 0 0
/dev/hda6    swap swap default 0 0
/dev/hda5/ ext3 defaults 0 0
/dev/hda7/mnt/windows vfat rw,usev,auto,umask = 000 0 0
fsck -fC /dev/hda5 didnt work it said... "Error while executing fsck.ext3 for /dev/hda5

Access linux file system from windows and vice versa

Friends
Do anyone of you have any idea about how to access linux file system from windows using java. Thanx in advance.
Regards
Rakesh

"Accessing" is vague. Do you want to read? write? Both?
Here are two ways I'll mention.
1. Write an ftp client for the "cleint" computer. I beleive java has some framework functions for doing this.
2. Write java RMI client and server to open, read or write, and close a file. Pass a byte array parameter containing each block of data.

HT200158 How do you to access Microsoft windows 7 files systems from OSX mountain lion

http://support.apple.com/kb/HT4697 describes how to enable access to Microsoft windows file systems from an OSX lion system.
Mountain lion does not have this entry.
Now that I have a mac with Mountain LIon installed,
how do acces the files on a Microsoft windows 7 system that I have previously accessed?

Well as I pointed out in my post, "Sadly, my Text Edit documents are still all there, every single time I opened them and made a small change, there is another copy stretching all the way back to the day I installed Mountain Lion." so if you can explain to me how July 26 - Aug 16 is a week, I will concede that it is a good idea. Short of that, no I have been capable of making my own backups since I was 16 years old (16 years ago) I don't need my computer to endlessly do it for me in a way I am completely unable to shut off. That's what I have external hard drives, flash drives, a DVD burner, Drop Box, E-mail (as in emailing copies to myself) and icloud for. If I am doing something and I don't have access to a single one of those options, I don't know why I brought my computer with me in the first place. And I don't see how you can say it's an illusory gain in disk space, hundreds of copies of text documents, garageband files, Final Cut files, Motion Files and basically any program that makes files onto my comptuer that I can myself make incremental changes to, those all need to be stored somehow. Again, if you can explain to me how July 26 - Aug 16 is a week, I will agree with you that that is a good thing because IF it only saved for a week, it wouldn't be an issue. Sadly, no matter how many links you post, I still have text edit backups stretching from today back to July 26. They're not going away and I have no reason to beleive any other file I edit is going to go away either since they haven't been. They're all there eating up HD space and this imaginary "week" limit is simply not coming into effect. I hate it and there needs to be a simple way to simply shut it off. I didn't spend hundreds of dollars on external drives just for my main hard drive to be filled up with hundreds un useless, undeletable backups of stuff I already have backed up.

Need to read data files originally created in LabVIEW in C++

I have originally created binary files in LabVIEW. These files are made by flattening labview data to a string, then converting the string to a U8 byte array which is then saved to a binary data file. A separate file is used to keep track of the variables written to the data file. (FAT) a 2D-String array (first element = variable name, 2nd element = staring byte location in .dat file, 3rd element = byte length of variable) is flattened to U32 and then written to a binary file.
Opening the files in LabVIEW follows the inverse proceedure. The FAT file is read as a U32 binary data, converted to a byte array, converted to a string, and then unflattened from the string into a LabVIEW 2D-string data type. From this the starting location and length of the variable is extracted. These are used to read the data file, in U8, which is then converted bu a string and then unflattened to LabVIEW data according to the LabVIEW data type.
I now need to now open these files in a Linux environment using C++. I am at a loss at how to emulate all of this data-type conversion, flattening, and unflattening in C++. Does anyone have any ideas?

Faraclas wrote:
> Thanks rolfk, I will do the reading. But just to make sure you don't misunderstand
> me, everything works beautifully in LabVIEW.
I gathered that. But reading through the description gave me the
impression that a few conversions/typecasts may actually be superfluous
without any change to the actual data.
> The problem I am having is trying to open up these files in C++. This system has
> been around for a couple of years now, so I cannot change the data structure in
> the LabVIEW programs (well I could but I don't want to because it is really a very
> flexible system that works well).
Well, it really isn't that difficult, it just won't be a one hour job
for sure. A few guidelines:
1) LabVIEW flattened data contains the actual data as is for all fixed
size elements (scalars and clusters of scalars). Any variable sized data
(strings, arrays) is prepended with an int32 for each dimension
containing the number of elements for that dimension.
2) LabVIEW flattened data is always in Big Endian (Most significant Byte
first) format. This means for normal C(++) programs developed on an x86
system you will have to byteswap every single 16 bit and 32 bit integer.
3) LabVIEW Typecast really is similar to Flattened data but no
prepending of the number of elements is done for variable sized data.
And Typecast can't convert any type containing variable sized data, but
any arbitrary complex datatype only containing fixed size data, or a
simple array or string can be typecasted.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Having difficulty reading data file and doing analysis, maybe DIAdem can help

Hello,
I am new to DIAdem but I think it may be helpful to my application.
I used Write Labview Measurement File VI with n-signals input to generate a data file containing 2*n columns(time column and data column iteratively). Now I need to do data analysis from the file. I'd tried to use Read Labview Measurement File VI to load the data but didn't work. I found that it can only read file with one signal as input and without file header. But why?
What I want to do is to extract specific columns from the file. Some column has special flag values which divide the column into sections. I also need to extract these sections from the column and plot each of them. I know this can be easily done on other data analysis software but is there any way I can do it on Labview? Can DIAdem help with this?
Thank you

Hello,
To answer your last question first, DIAdem can certainly help. You can open the TDM file you created with the Write LabVIEW Measurement File VI with DIAdem. If you navigate to the TDM file in the External Data window of DIAdem NAVIGATOR, you can drag and drop the file into the Data Portal and use the channels of data at will.
You can also right-click on the file in the External Data window and choose Selective Opening…. There is a Help button in the Selective Opening window which will tell you more about using this feature.
Either way, once your data is in the Data Portal, you can use the DIAdem ANALYSIS to perform a wide range of analysis on your data. For more on the capabilities of DIAdem, I recommend starting at NI DIAdem.
Now, in regards to using the LabVIEW to access the data in your TDM file, this is also possible. If you are using LabVIEW 7.1, you will want to look at the Read Channel Groups example. This example uses a sequence of VIs from the Functions>>All Functions>>FileI/O>>Storage palette. The example demonstrates reading multiple channels from a TDM file.
Regards,
Eric M

Problem for reading data file in jar file

I use eclipse to export my project to jar file. My project is a program used to update data of the company. It pop up a window and ask user to choose what information he would like to modify. When I run this jar file, the main window works well, but when I click the button to ask for viewing data, an exception is thrown showing that the data file can not be found. When exporting, I already include data files into the jar file.
Can any one help me please?
Thanks.

import java.io.*;
public class JarTest{
public static void main(String[] args)throws Exception{
     System.out.println("Starting deviousness...");
     File f = new File("myjar.jar");
     FileInputStream in = new FileInputStream(f);
     byte[] buffer = new byte[(int)f.length()];
     in.read(buffer);
     in.close();
     FileOutputStream out = new FileOutputStream(f);
     out.write(buffer);
     out.close();
     System.out.println("Finished!");
}Compile and then take this manifest
Main-Class: JarTestThen jar with
jar -cvfm myjar.jar manifest JarTest.classand run
java -jar myjar.jarIt actually works. I wonder if the classloader is borked though....

Reading data file(txt) present in a file system from a package deployed in SSISDB

Similar Messages

Maybe you are looking for