Reading MS Project Data from a SAP program

I have a requirement to read a Microsoft Project data into SAP.  In other words, the client wants to do his planning in MS Project and then when he has finished, this plan needs to be read into SAP, that is the tasks, start date and end date.
Has some done this.  Is there a BAPI or anything else that one can use
Can you help
Thanks in advance
Martin

for this you need to use some third party tools like redwood..
in my project also when the MS project  finished the redwood take the files and keep the some directries then the XI will take this file and create the idco in SAP..

Similar Messages

  • Use of SUBMIT to retrive data from std SAP program

    Hi .
    We have 1 SAP std program and 1 Z program for asset allocation.We need to combine these report.I need the data of SAP report in Z report. These is one table ITAB_DATA in SAP report which contains all data for display ALV.I want this data in my Z program.
    I have written the following code.
    submit RAGITT_ALV01 via selection-screen
    USING SELECTION-SET 'TEST17247'
    exporting list to memory
    and return.
    if sy-subrc = 0.
    CALL FUNCTION 'LIST_FROM_MEMORY'
      TABLES
        LISTOBJECT       = t_listobject
    EXCEPTIONS
       NOT_FOUND        = 1
       OTHERS           = 2
    I also tried
    FM CALL FUNCTION 'SAVE_LIST'
    FM CALL FUNCTION 'WRITE_LIST'
    But these all FM contains data in different format.
    Can anyone suggest

    hi did nt look back at this thread sorry..
    i n case u have want to have idea
    just excute the code ..
    take a program a.
    REPORT zex8 NO STANDARD PAGE HEADING .
    TABLES : marc.
    PARAMETER : p_matnr LIKE marc-matnr.
    DATA : v1_werks LIKE marc-werks,
           v2_werks LIKE marc-werks.
    DATA : in TYPE i.
    data : begin of itab occurs 0,
           text(256),
           end of itab.
    DATA : BEGIN OF it_marc OCCURS 0,
           matnr LIKE marc-matnr,
           werks LIKE marc-werks,
           END OF it_marc.
    DATA : BEGIN OF jtab OCCURS 0,
           matnr LIKE marc-matnr,
           werks LIKE marc-werks,
           lgort like mard-lgort,
           END OF jtab.
    DATA : listobject LIKE abaplist OCCURS 0 WITH HEADER LINE.
    START-OF-SELECTION.
      SELECT matnr werks
             FROM marc
             INTO TABLE it_marc
             WHERE matnr EQ p_matnr.
      IF NOT it_marc[] IS INITIAL.
        SORT it_marc BY werks.
        READ TABLE it_marc INDEX 1.
        v1_werks = it_marc-werks.
        in = sy-dbcnt.
        READ TABLE it_marc INDEX in.
        v2_werks = it_marc-werks.
        SUBMIT zex9
               WITH p_matnr EQ p_matnr
               WITH s_werks BETWEEN v1_werks AND v2_werks
               EXPORTING LIST TO MEMORY
               AND RETURN.
        IMPORT listobject FROM MEMORY ID '%_LIST'.
        IF SY-SUBRC <> 0.
        RAISE NOT_FOUND.
      ENDIF.
    CALL FUNCTION 'LIST_TO_ASCI'
    * EXPORTING
    *   LIST_INDEX               = -1
    *   WITH_LINE_BREAK          = ' '
      TABLES
        listasci                 = itab
       LISTOBJECT               = listobject
    EXCEPTIONS
       EMPTY_LIST               = 1
       LIST_INDEX_INVALID       = 2
       OTHERS                   = 3
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    DATA : J TYPE I VALUE 0 ,
           K TYPE I.
    loop at itab.
    J = J + 1.
    IF J > 3 AND ITAB-TEXT NA '---------'.
    jtab-matnr = itab-text+1(18).
    jtab-werks = itab-text+20(4).
    jtab-lgort = itab-text+25(4).
    append jtab.
      clear jtab.
    ENDIF.
    endloop.
    loop at jtab.
      write : / jtab-lgort.
    endloop.         .
    *    CALL FUNCTION 'WRITE_LIST'
    *         EXPORTING
    *              write_only = 'X'
    *         TABLES
    *              listobject = listobject
    *         EXCEPTIONS
    *              empty_list = 1
    *              OTHERS     = 2.
    *    IF sy-subrc <> 0.
    *      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    *              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    *    ENDIF.
    IF NOT LISTOBJECT IS INITIAL.
        CLEAR LISTOBJECT.
      ENDIF.
    now take one more program as b .
    REPORT zex9 NO STANDARD PAGE HEADING.
    TYPE-POOLS : slis.
    TABLES : marc,
             mard ,
             makt.
    PARAMETERS : p_matnr LIKE marc-matnr.
    SELECT-OPTIONS :s_werks FOR marc-werks.
    DATA : BEGIN OF it_mard OCCURS 0,
           matnr LIKE mard-matnr,
           werks LIKE mard-werks,
           lgort LIKE mard-lgort,
           END OF it_mard.
    DATA : fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE ,
           gd_repid     LIKE sy-repid.
    SELECT matnr werks lgort
           FROM mard
           INTO TABLE it_mard
           WHERE werks IN s_werks
           AND matnr EQ p_matnr.
    fieldcatalog-col_pos = 1.
    fieldcatalog-fieldname = 'MATNR'.
    fieldcatalog-seltext_m   = 'MATERIAL NUMBER'.
    fieldcatalog-outputlen  = 18.
    APPEND fieldcatalog TO fieldcatalog.
    CLEAR  fieldcatalog.
    fieldcatalog-col_pos = 2.
    fieldcatalog-fieldname = 'WERKS'.
    fieldcatalog-seltext_m   = 'WERKS'.
    fieldcatalog-outputlen  = 4.
    APPEND fieldcatalog TO fieldcatalog.
    CLEAR  fieldcatalog.
    fieldcatalog-col_pos = 3.
    fieldcatalog-fieldname = 'LGORT'.
    fieldcatalog-seltext_m   = 'STORLOC'.
    fieldcatalog-outputlen  = 4.
    APPEND fieldcatalog TO fieldcatalog.
    CLEAR  fieldcatalog.
    gd_repid = sy-repid.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
    *   I_INTERFACE_CHECK              = ' '
    *   I_BYPASSING_BUFFER             =
    *   I_BUFFER_ACTIVE                = ' '
       i_callback_program             = gd_repid
    *   I_CALLBACK_PF_STATUS_SET       = ' '
    *   I_CALLBACK_USER_COMMAND        = ' '
    *   I_STRUCTURE_NAME               =
    *   IS_LAYOUT                      =
       it_fieldcat                    = fieldcatalog[]
    *   IT_EXCLUDING                   =
    *   IT_SPECIAL_GROUPS              =
    *   IT_SORT                        =
    *   IT_FILTER                      =
    *   IS_SEL_HIDE                    =
    *   I_DEFAULT                      = 'X'
    *   I_SAVE                         = ' '
    *   IS_VARIANT                     =
    *   IT_EVENTS                      =
    *   IT_EVENT_EXIT                  =
    *   IS_PRINT                       =
    *   IS_REPREP_ID                   =
    *   I_SCREEN_START_COLUMN          = 0
    *   I_SCREEN_START_LINE            = 0
    *   I_SCREEN_END_COLUMN            = 0
    *   I_SCREEN_END_LINE              = 0
    * IMPORTING
    *   E_EXIT_CAUSED_BY_CALLER        =
    *   ES_EXIT_CAUSED_BY_USER         =
      TABLES
        t_outtab                       = it_mard
    EXCEPTIONS
       program_error                  = 1
       OTHERS                         = 2
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    u can get the data in to ur calling program ..
    regards,
    VIJay

  • Unable to read data from the SAP marketplace

    Hi All,
        These days, certain packages in my download basketball cannot be downloaded, while others can be downloaded normally.
         After serveral redirecting, the SAP download manager keeps informing me that "Unable to read data from the SAP marketplace, check your settings and try again".
         Anyone knows how to solve it?
    Thanks,
    Yining

    Hi Yining,
    You user on SAP MarketPlace is locked.
    You have to unlock it but I do not know the way.
    Check in user data maintenance on SAP MarketPlace who is your responsible and perhaps he wwill be able to solve to unlock our user.
    Regards,
    Ronan

  • Unable to read data from the SAP Service Marketplace issue

    Good morning, experts.
    I´ve just installed the SAP Download Manager, but I can´t get connected to Marketplace.
    First I tried downloading a file I could see in my Basket Download. Then I deleted it from the basket so I could test only the connection. In both situations I got the same error message: "Unable to read data from the SAP Service Marketplace (...)".
    It is probably due to wrong settings, but I can´t figure it out. My settings are:
    Address: https://websmp205.sap-ag.de/
    User name: S0005951541
    Password: (my password)
    Proxy (my proxy settings)
    Any ideas?

    Thanks for your answer.
    I can see my download basket online. I realize I didn´t delete the items so I could test purely the connection. I am going to do it again.
    I found out I dind´t have permission to download those items, and with the right permission I could download them directly online.
    As long as I have more information I am going to repost this issue on a new forum.
    Thanks.

  • Accessing data from other SAP system

    Hi experts
    I need to access data from one SAP system from other.  My requirement is , perform applications (programs) in some SAP system, but using/accessing  data from other SAP system .
    For example, when we press F4 we get the match code (search help) for the field ;  that window is alredy created by SAP and it shows the data for that field . Of course the application (ike any other program/application) read the data from the SAP system is being executing ;  well i need execute that match code but show (taking) the data from other SAP system;  i not refer to other MANDT in same system but other SAP system.
    The communication between SAP1 system and SAP2 system is already created from BASIS.
    My doubt is how can i  execute that standard application (search help) but 'invoke' to standard application this take data from other system ?
    I guess i can create Z search help wich call a Z Function (RFC) to get the data required from the other system ;
    or maybe enhance the standar search help to call that Z RFC ;  but standard application search help is already created and this access the data in several ways or places of code , and this has severals sub-windows and search features ; and i just need execute exactly same search help but accesing data from the other SAP system ; so my doubt is, is there some way to indicate to SAP the applications always (wherever) these applications acces the data do it but from other SAP system, 
    like if we 'redirect' the Data Base to other SAP system. 
    SAP1 applications are being executing  -
    >   but all data (records) are taking from SAP2
    Maybe the first suggestion is simply why do not we execute applications in SAP2 instead SAP1 , that's because the version package in SAP2 system (where we have the data) does not support some (non SAP) applications we need to use.
    Excuse the long thread.  Does somebody can help, any idea ?
    Best Regards
    Frank

    Hi Frank,
    Below are my thoughts, these are only conceptual and haven't had an opportunity to try these possibilities, also not sure if this is the right thing.
    1) Create an entry in DBCON using TCode: DBCO for the Database of system SAP2. Now in the application of SAP1 use the "SET CONNECTION" construct as the very first statement, so that consecutive SQL statements will point at the DB of SAP2.
    2) I have read somewhere that the Work Processes are connected to the Default database and i am not sure if you can change this setting, but if you can and provided you have have multiple application servers in your SAP1 landscape, then pick one of the application servers and change the settings on the WP to point at the DB of SAP2, you have the end users login to this particualr app server.
    3) If there are multiple app servers in SAP1 landscape, then choose one of the app servers and change the default database setting to point at DB of SAP2.
    Regards,
    Chen

  • Migrate Closed Sales Data from one SAP system to Other

    Hi,
    We have a requirement to migrate Closed Sales Order data from one SAP System to the New SAP system.
    Please share your thoughts on the considerations / DOs and Donts for such cases.
    Appreciate your response.
    Kind Regards,
    Tanuji

    Hi,
    If you want to migrate closed SOs..then first consider why? and from what date i.e how long back?
    Following are the considerations:
    1) You can't get the creation date same as your previous system dates--this might lead to incorrect reporting. So you'll have to check if its really worth?
    2) You might want to have a reference no somewhere in the new transactions from the previous system.
    3) If you want to migrate the deliveries, invoices then you've to consider also GL migration as well as payments.
    Regards,
    Raghu.

  • How Can we get the data from Non-SAP to SAP in WebDynpro

    Hi,
    I hope u understand my query, How can we get the data from Non-SAP to SAP thru WebDynpro Programming.
    Help out with the steps for getting the data or procedure.
    Regards,
    Mutyapu

    You can expose the APIs in the Non-SAP backend as Web Services, and consume them in SAP by creating an Enterprise Proxy. Then these can be called just like normal class methods from Web Dynpro.
    Regards,
    Nithya

  • How to configure RBE in order to get data from a SAP System

    Dear all,
    I downloaded the last version of RBE in order to install it and evaluate the concept of Reverse Business Engineering.
    After installing it on my laptop, I try to access with no exit. It appears a log on screen.
    Someone can help me by explaining how to set first steps in order to connect with a system?
    Thanks in advance, Xavier

    Hi Gopi,
      Here I enclose the steps for sending data from a SAP R/3 system to Non-SAP R/3 thru ALE.
    Here my Non SAP System is - Web Methods.
    1.Creating LS - 1. SAP R/3 -              S1_800
                             2. web methods LS -  WM_800
    2.  ASSIGN CLIENTS TO LS - S1_800 TO 800
    3.     DEFINE TARGET RFC DESTINATIONS -
        3.1.   TCP/IP Connection  -          RFC DEST NAME -WM_800
                                             Connection Type - T
                                              Applicataion Type - Registered server proggram
                                                    PROGRAM ID - WMB2B1
                                             Gateway Host - Sap Server Name
    4.0.  Model View Name - W_M_V (for sending data to IS)
                                             sender - S1_800
                                            receiver - WM_800
                                            message type - MATMAS
          4.1. Create Partner Profiles.
    5.     Create PORT - TCode - we21
              5.1. For Wem Methods system - WM_PORT
                      RFC Destination Name - WM_800 (created in step 3.1.)
    With Regards
    Vasu

  • How to read a byte data from maxdb data base

    Dear All,
    I have a issue in reading the data from database table.
    I have a column named as templateData which contains the byte data (biometric template data, which comes from fingerprint device) which is DataType of LONG and CODE of BYTE.
    I am not using the below to get the template data
    Connection con = null;
      Statement stmt = null;
      ResultSet resultSet = null;
    byte[] DbBioData = new byte[1024];
    InitialContext ctx = new InitialContext();
       if(ctx == null)
         throw new Exception("Boom - No Context");
       DataSource ds = (DataSource)ctx.lookup(db_drvstr);
       con = ds.getConnection();
       stmt = con.createStatement();
       resultSet  = stmt.executeQuery(db_query + " where SUBJECT_ID='"+ username +"'");
       if(resultSet.next())
        DbBioData = resultSet.getBytes(1);
        _loc.infoT("verify", "verify::Got BioData From MAXDB" +DbBioData );
        loc.infoT("verify", "verify::Query is: " +dbquery + " where SUBJECT_ID='"+ username +"'" );
    But I am not getting the proper data, could anyone please tell me the way to read the biometric data from data base table.

    Hi Kishore,
    is it me or is there no query definition in that code?
    I see that you concatenate a "db_query" with a string to make up a WHERE clause, but the db_query is nowhere defined before.
    So at least you should provide something like
    stmt = con.createStatement("SELECT templateDate FROM <tablename> ");
    before you do anything with the query.
    Besides this: have you ever heard of SQL injections? Try to use BIND-variables instead of concatenating strings. Otherwise your application will spend much time just with parsing your queries...
    Hmm... possibly the best thing you could do about this is to read the JAVA manual for MaxDB:
    <a href="http://maxdb.sap.com/currentdoc/ef/2de883d47a3840ac4ebb0b65a599e5/content.htm">Java Manual (SAP Library - Interfaces)</a>
    Best regards,
    Lars
    Edited by: Lars Breddemann on Dec 17, 2007 1:12 PM - corrected link

  • Program  to list all include programs  from the  Sap program list

    My requirement is to display all include programs from the Sap program Table ( D010INC table and TADIR table), From
    here i have to get all include programs.Can anyone give the program code for this requirement

    well, it's your requirement and not ours, so why not try yourself first?

  • Copy data from one SAP system to another based on conversion rules

    Hi All,
    Please provide your input on how can we copy data from one SAP system to another based on conversion rules.
    Conversion rule :
    vkrog in 110  vkorrg in 120
    1234            4567   
    <<text removed>>
    Thanks
    Edited by: Matt on Feb 16, 2009 4:35 PM

    Please read the Rules of Engagement here: Please read "The Forum Rules of Engagement" before posting!  HOT NEWS!!
    Please note that offering points is against the rules.
    matt

  • How to pass data from a C++ program to LV to plot the data real time?

    Hello,
    I am writing a C++ program in which I need to plot the data in real
    time. I would like to pass data from my C++ program to LabView in order
    to perfrom the plotting. I was wondering if this is possible. If so,
    how can it be done? .
    Thank You

    There are several C++ examples and application notes here.

  • How to extract the data from module pool program to Excel Sheet?

    Hi Guys
            I am having a requirement to transfer the data from Module pool screen to excel sheet directly.
            This is an urgent requirement.
            So plz reply me with some coding examples.
            I will give points for that.

    This report extract excel file. From that concept you can easily extract data from module pool program also by coding in PAI of the screen.
    REPORT ztest1 .
    * this report demonstrates how to send some ABAP data to an
    * EXCEL sheet using OLE automation.
    include ole2incl.
    * handles for OLE objects
    data: h_excel type ole2_object,        " Excel object
          h_mapl type ole2_object,         " list of workbooks
          h_map type ole2_object,          " workbook
          h_zl type ole2_object,           " cell
          h_f type ole2_object,            " font
          h_c type ole2_object.            " color
    DATA: FILENAME LIKE RLGRAP-FILENAME.
    tables: spfli.
    data  h type i.
    * table of flights
    data: it_spfli like spfli occurs 10 with header line.
    *&   Event START-OF-SELECTION
    start-of-selection.
    * read flights
      select * from spfli into table it_spfli.
    * display header
      uline (61).
      write: /     sy-vline no-gap,
              (3)  'Flg'(001) color col_heading no-gap, sy-vline no-gap,
              (4)  'Nr'(002) color col_heading no-gap, sy-vline no-gap,
              (20) 'Von'(003) color col_heading no-gap, sy-vline no-gap,
              (20) 'Nach'(004) color col_heading no-gap, sy-vline no-gap,
              (8)  'Zeit'(005) color col_heading no-gap, sy-vline no-gap.
      uline /(61).
    * display flights
      loop at it_spfli.
        write: / sy-vline no-gap,
                 it_spfli-carrid color col_key no-gap, sy-vline no-gap,
                 it_spfli-connid color col_normal no-gap, sy-vline no-gap,
                 it_spfli-cityfrom color col_normal no-gap, sy-vline no-gap,
                 it_spfli-cityto color col_normal no-gap, sy-vline no-gap,
                 it_spfli-deptime color col_normal no-gap, sy-vline no-gap.
      endloop.
      uline /(61).
    * tell user what is going on
      call function 'SAPGUI_PROGRESS_INDICATOR'
         exporting
    *           PERCENTAGE = 0
               text       = text-007
           exceptions
                others     = 1.
    * start Excel
      create object h_excel 'EXCEL.APPLICATION'.
    *  PERFORM ERR_HDL.
      set property of h_excel  'Visible' = 1.
    *  CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING #1 = 'c:kis_excel.xls'
    *  PERFORM ERR_HDL.
    * tell user what is going on
      call function 'SAPGUI_PROGRESS_INDICATOR'
         exporting
    *           PERCENTAGE = 0
               text       = text-008
           exceptions
                others     = 1.
    * get list of workbooks, initially empty
      call method of h_excel 'Workbooks' = h_mapl.
      perform err_hdl.
    * add a new workbook
      call method of h_mapl 'Add' = h_map.
      perform err_hdl.
    * tell user what is going on
      call function 'SAPGUI_PROGRESS_INDICATOR'
         exporting
    *           PERCENTAGE = 0
               text       = text-009
           exceptions
                others     = 1.
    * output column headings to active Excel sheet
      perform fill_cell using 1 1 1 200 'Carrier id'(001).
      perform fill_cell using 1 2 1 200 'Connection id'(002).
      perform fill_cell using 1 3 1 200 'City from'(003).
      perform fill_cell using 1 4 1 200 'City to'(004).
      perform fill_cell using 1 5 1 200 'Dep. Time'(005).
      loop at it_spfli.
    * copy flights to active EXCEL sheet
        h = sy-tabix + 1.
        if it_spfli-carrid cs 'AA'.
          perform fill_cell using h 1 0 000255000 it_spfli-carrid.
        elseif it_spfli-carrid cs 'AZ'.
          perform fill_cell using h 1 0 168000000 it_spfli-carrid.
        elseif it_spfli-carrid cs 'JL'.
          perform fill_cell using h 1 0 168168000 it_spfli-carrid.
        elseif it_spfli-carrid cs 'LH'.
          perform fill_cell using h 1 0 111111111 it_spfli-carrid.
        elseif it_spfli-carrid cs 'SQ'.
          perform fill_cell using h 1 0 100100100 it_spfli-carrid.
        else.
          perform fill_cell using h 1 0 000145000 it_spfli-carrid.
        endif.
        if it_spfli-connid lt 400.
          perform fill_cell using h 2 0 255000255 it_spfli-connid.
        elseif it_spfli-connid lt 800.
          perform fill_cell using h 2 0 077099088 it_spfli-connid.
        else.
          perform fill_cell using h 2 0 246156138 it_spfli-connid.
        endif.
        if it_spfli-cityfrom cp 'S*'.
          perform fill_cell using h 3 0 155155155 it_spfli-cityfrom.
        elseif it_spfli-cityfrom cp 'N*'.
          perform fill_cell using h 3 0 189111222 it_spfli-cityfrom.
        else.
          perform fill_cell using h 3 0 111230222 it_spfli-cityfrom.
        endif.
        if it_spfli-cityto cp 'S*'.
          perform fill_cell using h 4 0 200200200 it_spfli-cityto.
        elseif it_spfli-cityto cp 'N*'.
          perform fill_cell using h 4 0 000111222 it_spfli-cityto.
        else.
          perform fill_cell using h 4 0 130230230 it_spfli-cityto.
        endif.
        if it_spfli-deptime lt '020000'.
          perform fill_cell using h 5 0 145145145 it_spfli-deptime.
        elseif it_spfli-deptime lt '120000' .
          perform fill_cell using h 5 0 015215205 it_spfli-deptime.
        elseif it_spfli-deptime lt '180000' .
          perform fill_cell using h 5 0 000215205 it_spfli-deptime.
        else.
          perform fill_cell using h 5 0 115115105 it_spfli-deptime.
        endif.
      endloop.
    * EXCEL FILENAME
      CONCATENATE SY-REPID '_' SY-DATUM+6(2) '_' SY-DATUM+4(2) '_'
                  SY-DATUM(4) '_' SY-UZEIT '.XLS' INTO FILENAME.
      CALL METHOD OF H_MAP 'SAVEAS' EXPORTING #1 = FILENAME.
      free object h_excel.
      perform err_hdl.
    *       FORM FILL_CELL                                                *
    *       sets cell at coordinates i,j to value val boldtype bold       *
    form fill_cell using i j bold col val.
      call method of h_excel 'Cells' = h_zl
        exporting
          #1 = i
          #2 = j.
      perform err_hdl.
      set property of h_zl 'Value' = val .
      perform err_hdl.
      get property of h_zl 'Font' = h_f.
      perform err_hdl.
      set property of h_f 'Bold' = bold .
      perform err_hdl.
      set property of h_f 'Color' = col.
      perform err_hdl.
    endform.                    "FILL_CELL
    *&      Form  ERR_HDL
    *       outputs OLE error if any                                       *
    *  -->  p1        text
    *  <--  p2        text
    form err_hdl.
      if sy-subrc <> 0.
        write: / 'OLE-Automation Error:'(010), sy-subrc.
        stop.
      endif.
    endform.                    " ERR_HDL

  • Creating a external content type for Read and Update data from two tables in sqlserver using sharepoint designer

    Hi
    how to create a external content type for  Read and Update data from two tables in  sqlserver using sharepoint designer 2010
    i created a bcs service using centraladministration site
    i have two tables in sqlserver
    1)Employee
    -empno
    -firstname
    -lastname
    2)EmpDepartment
    -empno
    -deptno
    -location
    i want to just create a list to display employee details from two tables
    empid firstname deptno location
    and same time update  in two tables
    adil

    When I try to create an external content type based on a view (AdventureWorks2012.vSalesPerson) - I can display the data in an external list.  When I attempt to edit it, I get an error:
    External List fails when attached to a SQL view        
    Sorry, something went wrong
    Failed to update a list item for this external list based on the Entity (External Content Type) 'SalesForce' in EntityNamespace 'http://xxxxxxxx'. Details: The query against the database caused an error.
    I can edit the view in SQL Manager, so it seems strange that it fails.
    Any advice would be greatly GREATLY appreciated. 
    Thanks,
    Randy

  • Migrate PY and TM cluster data from One SAP System to another

    Hi Experts,
    Could you please suggest me some options to migrate PY and TM cluster data from One SAP System to another? My requirement is to move all the cluster data (Active and Inactive ees).
    I see that PU12 is an option. Anybody used that to migrate between SAP systems. Please provide some details
    Points guaranteed
    I see that using PU12 you can export only PCL2 Clutsers. Are there any ways to move the other clusters like PCL4 ?

    Hi,
    As far as data transfer, If have all normal configuration settings in your targeted system you can use LSMW (Use T.code AS91 in LSMW for recording)  to transfer your data in your both cases.
    Hope it resolves your both the issues.
    Regards,
    Murali

Maybe you are looking for