Reading smart card contents with ActiveX

Hi
Dear All,
I have a java card and i write a simple calculator in it by using jcop. Now i want to execute these functions by a activeX control. I tried to see in google but could not find my solution. So plz do help me out that from where i should start and what are the actual steps of doing it ?
thank u !!

Sir you are right that it is java card forum, but i think my thread is somehow related to the java card as i am using java card on the other hand. Being a Java forum, if you were using Java to communicate with the card it would be more relevant :)
Sir plz can u suggest me any web link or book where i can get required material...Some reading material from the Microsoft site:
http://technet.microsoft.com/en-us/library/bb742533.aspx
http://msdn.microsoft.com/EN-US/library/aa374731.aspx#smart_card_functions
You may also find ISO7816-4 useful.
Cheers,
Shane

Similar Messages

Smart Cards slow with Sun Ray Windows Connector

I'm succesfully using smart cards to log on to Windows 2003. But the problem is that it's very slow!
If i enter a wrong pin code, its fairly quick to respond with an error but when entering the right one it takes like 13-15 seconds to log on. The smart card slot on Sun Ray 2 is flashing all that time, so it seems like it's reading the certificate takes that long?
Any ideas how to make it quicker?

I have done the same setup with SunRay 170.
Approx the same delay is experienced with my setup.
When I meet my Card Vendor next time around I will ask about
how many times the CERT is read.
The Sunray 2 is faster , alot faster than sunray 170 so the delay
must be the speed that card transactions can be performed.
//lars

CAC or smart card use with Oracle database and web server

I've been asked to smart card (CAC) enable our Oracle web server and database access. We currently use CAC to access many of our other applications.
Where can I find the following information
Oracle software required (and is it an additional cost)
How to integrate Oracle App server (web server) with CAC.
How would I need to change the database users accounts to be CAC enabled rather than database users accounts.
Thanks
steven jackson
[email protected]
614-692-9768

Virtualisation is not certified for Oracle RAC on Windows.
+Certified Software on Oracle VM [ID 464754.1]+ note states:
Oracle Real Application Clusters (RAC)
    Oracle 10.2.0.4 and up (10gR2) and 11.1.0.7 and up (11gR1) and 11gR2 RAC for Linux x86 and Linux x86_64 certified on Oracle VM
        Guest OS: Oracle Linux 5.1 (and above) RHEL 5.1 (and above) for Linux x86 / Linux x86_64
        Paravirtualized (PV) mode only (Guest OS and drivers)
        Only supported on Oracle VM 2.1.2 and above
        Live-migration of an Oracle RAC VM is supported with Oracle VM 2.2.1 and above.
        Previous versions are not supported. Please refer to this link for best practices.
        Over-committing CPUs is not recommended, but supported with the following restrictions:
            The total amount of VCPUs allocated to guest domains (running Oracle RAC guests), should not exceed
            two times (2x) the amount of real CPUs / cores in the Oracle VM server.
            The amount of VCPUs allocated to a single guest domain should not exceed the amount of real CPUs /
            cores in the Oracle VM server.
            Maintain Oracle VMs default VCPU allocation for dom-0: Oracle VM will allocate 1 VCPU for each real CPU or core to dom-0.
            CPU pinning is only recommended for hard partitioning. If no hard partitioning is required, CPU pinning should not be used.
        Static support only (dynamic support is being planned):
            Dynamic resizing of guest virtual machine is not supported (VCPU, memory and I/O)
            Virtual Machine Pause/Restore of an active Real Application Cluster virtual machine is not supported.

Smart Card application with EJB?

Hallo
I have the following problem:
I have to write an application which should be accessible from the internet. The whole application has to be on the server. Every user who wants to get access to the application has to insert a smartcard into the Reader who is installed on his local system. The application has to read some information (username or password for example) from the card and to prove if the user is allowed to start the Application.
Does anybody has an idea how to realize this? Is it possible to realize this with EJB or do i have to use an other technology?
Thanks for your answers

Well i did not use the java smart card technology. I used the Java native interface to implement the classes who have to read from the card. I got an api dll from the producer of the smart card. So i used the Java native interface to realize the logic of the smartcard application. This part of my programm is written in c++. The problem is that the whole programm is on a server but for getting access to the smartcard reader the dll s (the api dll from the producer and my dll for the jni) have to been installed on every client......
You said that i have to write a swing client who picks the information from the smartcard and sends it afterwards to the enterprise system. Is there no other possibility to solve this problem without writing a swing client ?

Smart Card Problem with AnyConnect over RDP

Hello,
For ASA 5545, v-8.6(1)2 and AnyConnect v-3.1.0165, I'm trying to start an AnyConnect client tunnel on a remote RDP (both ends Windows 7) machine and am having problems. The RDP is configured to proxy smart card devices which generally works fine. I'm using current SafeNet eToken with current client software. When I start AnyConnect from client machines (no RDP), the tunnel opens with no problem using the smart card. When I try to start the tunnel on the remote machine via RDP, I'm prompted for cert selection and smart card PIN, but get a popup from AnyConnect: 'VPN connection terminated, smart card removed from reader'. When I try to start the tunnel via RDP but use the ASA web server to start, the tunnel starts up fine with the smart card.
For the problem condition, the Windows event log on the remote RDP machine shows 3 entires (see below) wrt acvpnagent show smart card removal errors but the USB device is always inserted. Also, in investigating, I changed the client profile 'server list' config to SSL instead of IPSec. Same failure but the popup does not show.
VPN connection terminated, Smartcard removed from reader.
Description: VPNMGR_ERROR_SMARTCARD_REMOVED:A smartcard required for the connection has been removed
Thanks in advance for any assistance.
Mike

This can be resolved by going to services and disabling Smart card

PIV II Contactless Smart Card Support with Blackberry 10 Devices?

I've seen documents describing NFC smart card support and ISO 14443 compliance in Blackberry 10 software and devices, but this doesn't really make it clear... Does the NFC support in BlackBerry 10 devices allow it to use certificates on a PIV II contactless smart card (which follows ISO 14443) for signing and encryption of e-mail? (without needing the separate Bluetooth-connected BlackBerry smart card reader)

OK, undestood, I am neither of those. Just a user.
POP email does not push instantly. I will tell you what another user here commented in another thread... any business now a days that is still on POP email is somewhat like using candles to light your offices. You need to be on IMAP.
Perhaps you can check and see what it would take to convert. In most cases, it should be simple.
And if you do, ASK if that IMAP has PUSH enabled.
Or in naval terms... like sticking with a sail as the lastest technology when steam propulsion is available.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to Smart Card integrated with database ..im beginner

Dear,
im beginner for Technologies Smart Card.. I have ACOS2 and reader ACR30D ..I hope u can helping me..please my question?
1. How to java or Visul Basic integrated and presenting data on file in card (like name, address, phone number, ..etc)?
2. Please give me sample project in Visual Basic..?
its just for finnal test me.
Thanks for all
Best Reagard,
[email protected]

hello,
Check the section titled Reference Implementation on this page out.
http://www.opencard.org/index-downloads.shtml
Also if you really need codes in VB, this guys have stuff like that
http://www.motechno.com/x509-sdk.0.html
Tha development kit MAY be all you need
All the best,

Smart card logon with third party CA combined with ADFS to Office 365

Greetings,
I've been trying figure out how to implement ADFS to Office 365 in MS cloud in our environment, with little luck. I have a working 2012 domain and we are already using smart card logon on Windows 7/8 workstations. Certificates on smart cards are issued by
3rd party CA. This far every thing is fine and working, necessary root certificates are added to trusted Trusted Root Certification Authorities, UPN suffixes and users' UPNs are set according to UPN on the certificates and users successfully log on to
workstations with smart cards.
Now I face the requirement to enable SSOto Office 365 with accounts from our AD. I've been told by our MS partner and Dr. Google that in order to do that user account name (upn) in AD and in O365 need to match. Now the fact that account UPN in our AD is
not usable in O365 (because it is set to match 3rd party certificate UPN) and I have not found a way to enable smart card log on without changing UPN in AD.
Does anyone has experience of such a configuration? Is it possible to use AD federation to O365 at all in our case?
Best regards, and thanks in advance
Timo

On Fri, 25 Apr 2014 09:27:05 +0000, Timo Kallioniemi wrote:
Now I face the requirement to enable SSOto Office 365 with accounts from our AD. I've been told by our MS partner and Dr. Google that in order to do that user account name (upn) in AD and in O365 need to match. Now the fact that account UPN in our AD
is not usable in O365 (because it is set to match 3rd party certificate UPN) and I have not found a way to enable smart card log on without changing UPN in AD.
Does anyone has experience of such a configuration? Is it possible to use AD federation to O365 at all in our case?
This is not a general Windows server security issue. You should post your
question in an O365 support forum.
http://community.office365.com/en-us/f/default.aspx
Paul Adare - FIM CM MVP
Technology is dominated by two types of people: Those who understand
what they do not manage. Those who manage what they do not understand.
-- Putt's Law

How to replace a Smart object content with folder of JPGs

Greetings!
Sorry if that title is not clear. I have a cover design template (see example). The image is a transformed Smart Object. I want to streamline my workflow.
Say I have a folder of jpgs, and need to replace the smart object of the template with the new cover jpg, then save for web as a JPG comp. Repeat.
I already have a nice "scale layer to current canvas size" script from Michael L Hale. Which would be necessary in case the jpg is larger or smaller than the Smart object's content it will replace.
Any thoughts if this could be done?
Michael's resize script is here: http://forums.adobe.com/thread/1233856
Thanks
Maxi

Remember in that other tread I wrote you would need to take aspect ratio into account if you don't want distortion. You do not want distortion placing in images. You also do not want to place in all image in canvas size. If your images vary in size you do not want to replace the contents of a smart object layer for the smart object associated transform to work correctly you need the replace the embedded object with an object with exactly the same size of the original embedded object.
Also in that other thread I gave you code from one of my Photoshop Photo Collage Toolkit. You seem to be creating a collage. You man want to look at my Photo Collage Toolkit.
Templates are very easy to create for my Toolkit's scripts to work, You just need to follow four simple easy rules.
The Four Rules:
Size the photo collage templates for the print size you want - width, height and print DPI resolution.
Photo collage templates must have a Photoshop background layer. The contents of this layer can be anything.
Photo collage templates must have alpha channels named "Image 1", "Image 2", ... "Image n".
Photo collage templates layers above the background layers must provide transparent areas to let the images that will be placed below them show through.
So your template would be easy and look like this, Red rectangle outlines my scripts.
You would then use one of the scripts like interactive popopulate select the template then hit create collage
The script would the open the template copy it the go to full screen show you a cyan mask as to where the next image will be placed, And put you into an interactive select image dialog.
Once you select the script will place in the image resize and position it the put you in an interactive transform so you can tweak the position and size. The Populated collage will remain open in Photoshop.
Documentation and Examples

Is there any way to read Processing instruction content with XMLDOM

I am having problem to read the content of PRocessing instructions with PLSQL XMLDOM.
Would appriciate if someone could help. with code sample.

DOM doesn't have any direct way to select nodes. Processing-Instructions are child nodes to the corresponding node. If you know the tree structure you can traverse the tree and goto the particular PI node.
The easiest way is to XPath expressions. The following example retrieves all the Processing Instructions in the document.
XSLProcessor.selectNodes(document, '//processing-instruction()')

Function module to read Mail Form contents with Usage Type SMS

Hello there,
I have created a Mail Form with Usage Type as Internet Mail (HTML). I can successfully read the Mail Form by using Function Module CRM_ERMS_MAIL_COMPOSE_NEW. This is working fine to send an email.
I have created another Mail Form with Usage Type as SMS. Since the usage type is a plain text, function module CRM_ERMS_MAIL_COMPOSE_NEW does not return the mail form contents. The requirement is to send the SMS with mail form contents. Appreciate if you can suggest a Function module or Class - Method to retrieve Mail form contents when usage type is SMS.
Thanks,
Shaun

Hello there,
I have created a Mail Form with Usage Type as Internet Mail (HTML). I can successfully read the Mail Form by using Function Module CRM_ERMS_MAIL_COMPOSE_NEW. This is working fine to send an email.
I have created another Mail Form with Usage Type as SMS. Since the usage type is a plain text, function module CRM_ERMS_MAIL_COMPOSE_NEW does not return the mail form contents. The requirement is to send the SMS with mail form contents. Appreciate if you can suggest a Function module or Class - Method to retrieve Mail form contents when usage type is SMS.
Thanks,
Shaun

Reading smart card via swipe, Am I on right path?

Hello everyone,
I would like to develop a simple application which allows
user authentication via card swipe. I would like to know if AS3 can
accommodate such task?
Thanks.

See, on the external, I can't have three folders that all say iTunes music folder, each one belonging to a different user.
Sure you can. Put them in separate folders (John's music, Mary's music and Sam's music).
But you should be creating new iTunes folders, not simply iTunes music folders. The iTunes music folder is in the iTunes folders but so it the iTunes library file.
Any reason you want the music separated? You can put it all in one library. Everyone uses the same and simply create a playlist of the music they want. This way, if you have any of the same music, you won't have it on the computer more than once.

Problem with CertificateRequest when using a smart card

Hello,
I have used the ssl debug statement to determine that ssl server is sending a CertificateRequest and a list of CAs. The smart card is opened via a password and I think X509KeyManagerImpl compares the Issuer of the smart card certificates with the server sent CAs. However since the issuer is an intermediate CA and only the root CA is in this list, the smartcard certificates are rejected. I CAN'T have the intermediate CA place in the ssl server list.
Using SSLConnect (KeyManager, X509TrustManager, null). The KeyManager is using NSS and the TrustManager is using opensc-pkcs11 via SunPKCS11. The OS is Linux, kernel 2.6.35.10-74.fc14.i686.
The intermediate CA is in the local cert store.
The application being used is DavMail.
Am I correct in stating that the the smart card certificates are checked against the server sent CAs?
Does anyone know how to get Java to use he local cert store to find the intermediate CA and then verify it against the Root CA in the server sent list?

Placed in wrong forum. Moved it to Security Java Secure Socket Extension (JSSE)

Logon with Virtual Smart Card Breaks Run As Administrator

I've been testing the Virtual Smart Card (VSC) capability on a Surface Pro 2 and Dell Latitude E7240.
This may be by design however, I have noticed that if I login using the VSC I am unable to use "Run As Administrator" functionality - for example:
Command Prompt from Start Screen
Task Manager
I'm prompted for a username / password or the VSC PIN.
In my environment the Administrative user does not have a VSC, so it is a username/password. When using Run As Administrator I'm therefore always entering a username and password.
Once the credentials are entered the prompt goes away but the application never runs.
If I lock/unlock the session and login using username/password for the non-admin user, instead of the VSC and PIN, I am able to elevate using Run As.
I have noticed that I can use the workaround as specified in this article:
http://support.microsoft.com/kb/2013976
To work around this issue, start the application using the Run as different user right-click context menu option and select the smart card reader of choice.
Click Start, select Programs, and locate the shortcut item in the Programs menu or the application folder for the application you want to run
Hold down the SHIFT key while you right-click the shortcut item, and select Run as different user.
Enter the username, password and the domain name or choose a smart card logon.
Seems a little odd... maybe I am missing something. If anyone can assist that would be great.
Thanks, Chris
MCTS 70-640 | MCTS 70-642 | Prince2 Practitioner| ITIL Foundation v3 | http://www.cb-net.co.uk

Hi Chris,
I also have this issue. I think it is a known issue for Windows.
I did some more research in web and found what I was looking for.
RUNAS /SMARTCARD Only Supports a Single Smart Card Reader
http://support.microsoft.com/kb/2013976
How Smart Card Logon Works in Windows
http://technet.microsoft.com/en-us/library/ff404285(v=WS.10).aspx
Guidelines for enabling smart card logon with third-party certification authorities
http://support.microsoft.com/kb/281245
Thanks

Virtual Smart Cards with a 3rd Party CA

Hi,
I am new to this but we want to start implemeting virtual smart cards but I am having difficult finding out how to use a 3rd party CA with them. Any help would be appreciated.
Thanks in advace,
Liz

Hi Liz,
Here is an article below which could be useful to you:
Guidelines for enabling smart card logon with third-party certification authorities
http://support.microsoft.com/kb/281245
Best Regards,
Amy

Reading smart card contents with ActiveX

Similar Messages

Maybe you are looking for