Reapplying patchset 10.2.0.5 after dg4msql gateway installation

Hello,
I have patched a 10.2.0.1 RDBMS with a 10.2.0.5 (64 bit) patchset without any problems and installed a dg4msql gateway - also without problems. The dblink to the sql server works just fine.
But:
on note 562509.1 on metalink, the instructions specifically say that if you are installing a gateway into an existing oracle home and you have previously patched that oracle home, then you should reapply the patchset.
When I tried to apply the patchset again (I have turned off the listener and shutdown the database), the prerequisite check says everything is OK, but on the very next step I receive an error:
Abnormal program termination. An internal error has occured. Please provide the following files to Oracle Support:
"/oracle/oraInventory/logs/installActions2011-11-04_08-27-30AM.log"
"/oracle/oraInventory/logs/oraInstall2011-11-04_08-27-30AM.err"
"/oracle/oraInventory/logs/oraInstall2011-11-04_08-27-30AM.out"
The .log file doesn't contain anything out of ordinary except the error message at the end with no further explanation. The .err file contains the following:
Exception java.lang.NoClassDefFoundError: oracle/sysman/oii/oiix/OiixGeneralQueries occurred..
java.lang.NoClassDefFoundError: oracle/sysman/oii/oiix/OiixGeneralQueries
     at getOSName.performQuery(getOSName.java:16)
     at oracle.sysman.oii.oiis.OiisCompContext.doQuery(OiisCompContext.java:2513)
     at Components.oracle.odbc.ic.v10_2_0_5_0.CompContext.getCalculatedValueObject_PRE_REQUISITE(Unknown Source)
     at Components.oracle.odbc.ic.v10_2_0_5_0.CompContext.getCalculatedValueObject(Unknown Source)
     at oracle.sysman.oii.oiis.OiisCompContext.getCalculatedValue(OiisCompContext.java:654)
     at oracle.sysman.oii.oiis.OiisPreRequisiteVar.getCalculatedValue(OiisPreRequisiteVar.java:155)
     at oracle.sysman.oii.oiis.OiisVariable.setVariable(OiisVariable.java:2439)
     at oracle.sysman.oii.oiis.OiisVariable.setVariable(OiisVariable.java:2124)
     at oracle.sysman.oii.oiis.OiisCompInstallation.getPreRequisite(OiisCompInstallation.java:831)
     at oracle.sysman.oii.oiis.OiisCompInstallation.getContext(OiisCompInstallation.java:521)
     at oracle.sysman.oii.oiio.oiiod.OiiodDepEngine.checkPreReq(OiiodDepEngine.java:5116)
     at oracle.sysman.oii.oiio.oiiod.OiiodDepEngine.depModeApply(OiiodDepEngine.java:2548)
     at oracle.sysman.oii.oiif.oiifw.OiifwPostDepModesWCCE.doOperation(OiifwPostDepModesWCCE.java:330)
     at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
     at oracle.sysman.oii.oiic.OiicDepWizEngine.doOperation(OiicDepWizEngine.java:450)
     at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
     at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1286)
     at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
     at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:572)
     at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:962)
     at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:899)
I can't figure out what the problem could be. The errors don't say anything about missing libraries (as I have seen problems on other similar threads).
I am also providing the output of 'opatch lsinventory', if it should prove useful:
Invoking OPatch 11.1.0.6.6
Oracle Interim Patch Installer version 11.1.0.6.6
Copyright (c) 2009, Oracle Corporation. All rights reserved.
Oracle Home : /oracle/product/10.2.0/ora10
Central Inventory : /oracle/oraInventory
from : /etc/oraInst.loc
OPatch version : 11.1.0.6.6
OUI version : 11.2.0.1.0
OUI location : /oracle/product/10.2.0/ora10/oui
Log file location : /oracle/product/10.2.0/ora10/cfgtoollogs/opatch/opatch2011-11-04_14-41-17PM.log
Patch history file: /oracle/product/10.2.0/ora10/cfgtoollogs/opatch/opatch_history.txt
Lsinventory Output file location : /oracle/product/10.2.0/ora10/cfgtoollogs/opatch/lsinv/lsinventory2011-11-04_14-41-17PM.txt
Installed Top-level Products (3):
Oracle Database 10g 10.2.0.1.0
Oracle Database 10g Release 2 Patch Set 4 10.2.0.5.0
Oracle Database Gateways 11.2.0.1.0
There are 3 products installed in this Oracle Home.
There are no Interim patches installed in this Oracle Home.
OPatch succeeded.
Does it maybe have anything to do with the OPatch version (could it be too recent for the 10.2.0.5 patchset ?)
The operating system I am using is Oracle Linux 5 with kernel version: 2.6.18-194.el5
Hopefully someone could shed some light on my problem.
Thank you in advance and kind regards
BL

Thank you for a quick response,
yes I have applied the 10.2.0.5 patch to the ora10 home (10.2.0.1) and afterwards installed 11.2 gateway to the same oracle home. Obviously that was the problem. Luckily that was only my test system so I can be more careful in the future. I will test by installing the gateway in a separate oracle home.
One more question: When you said
"If you applied the 11.2 patchset to the 10.2 OH then you will have to restore the 10.2 software into the 10.2 OH as it will have been corrupted by the 11.2 software."
How do I restore the 10.2 software ? Should I reinstall the 10.2.0.1 software and patch it to 10.2.0.5 ? Won't that remove the gateway ? If that is the case I will install the gateway in a separate OH.
Thank you again
Kind regards
BL

Similar Messages

After download and installation of PS PE12 I have problems starting the programm. After selecting video and new project nothing happens, only the colorbar below new project is showing

New computer.
After download and installation of PS PE12
I have problems starting the programm, double clicking on the icon.
After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
(expected was to activate the program and the sarting the PE12)
PSE12 runs fine
System:
WIN8.1 / i7 /16GB RAM

New computer.
After download and installation of PS PE12
I have problems starting the programm, double clicking on the icon.
After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
(expected was to activate the program and the sarting the PE12)
PSE12 runs fine
System:
WIN8.1 / i7 /16GB RAM

I own a late 2009 Macbook Pro, and it keeps freezing after OSX Lion installation.

I own a late 2009 Macbook Pro, and it keeps freezing after OSX Lion installation. I will post my computer's 'specs' below. I installed Lion, from Snow Leopard, through the App store. The first week, it worked like a dream, and was loving my brand new computer, or so it seemed. I then began to run into problems, and I can't confirm this 100%, but I believe it was after I updated from 10.7.1, to 10.7.2.
The freezes are sporatic at best, and cannot be narrowed down to one app. I googled the issue about two weeks ago, and found a fix involving a temporary log-in, verifying the disk, restarting the computer holding CMD+R, and repairing the disk from there. That fixed the problem. For about three or four days. From there I brought my laptop to Best Buy, where I purchased the computer (start the groans, my dad wanted the accidental damage, and he was paying, there was no argument). My warranty there was still good, but all they were offering was to check my hard-drive, and possibly ship it out. That would not be good for me, as I am a High School student, who works online.
So I then decided to go to the Apple store, see what they said. They said a bunch of people had this problem, it would cost a lot to fix, as I would need a new Logic Board. This did not make any sense to me, as I knew it was Lion's fault, so why would they not make the L-2009MBP Logic Board compatible, and why are only a few people having this problem, well a lot more than a few, but I mean not everyone.
So I asked a friend about it, and we decided to run a back up, and erase the computer, and re-install Lion. Figuring maybe my data was corrupted during install. This helped for a day or two, and happened again. So this time, we backed up only files (music, pics, documents, etc.,) and did a fresh install. I got my computer back last night. Now, I am not saying that didn't help. Previously I would have frozen about 18 times well writing this, but I have not frozen once (hopefully I didn't just jinx myself). I have gone from about one freeze every 10-15 minutes (sometimes worse), to about one every 1-3 hours. Which, let's be honest is still a lot.
So, before I just decide to go and revert to Snow Leopard on my merry way, I ask, do any of you have any other ideas? Or guarenteed fixes? I know a guarentee is a hard thing to ask for, but I am desperate, my teachers are getting angry with me for not sending work, and I know this would help a lot of people. Thank you to those who read through my whole spiel, and thank you to those who will help me!
[Ps, while I am somewhat of a noob, I know my way around a computer, so any help, or knowledge you could bestow upon me is awesome. Especially DIY fixes. (if your only advice is, don't buy a mac at Best Buy, don't bother commenting)]
Macbook Pro
15-inch, 2.53GHz, Mid 2009
Processor: 2.53 GHz Intel Core 2 Duo
Memory: 4 GB 1067 MHz DDR3
Graphics: NVIDIA GeForce 9400M 256 MB
Software: Mac OS X Lion 10.7.2 (11C74)

Once it is downloaded you need to restart the computer if it does not restart automatically. When it next starts up you should note a progress bar appearing below the Apple logo. When done the computer will restart once more. The new firmware should now be installed.

HELP! My old mac was requested to upgrade Firefox to 14.0.1. After the sucessfully installation, I received a message saying my old Mac couldn't use the new Firefox and Safari crashes. I have NO browser now!!!

My old mac was requested to upgrade Firefox to 14.0.1. After the sucessfully installation, I received a message saying my old Mac couldn't use the new Firefox and Safari crashes. I have NO browser now! Any help would be appreciated.

Hmmm... So you upgraded Firefox and now neither Firefox or Safari will work? Very weird. I have no idea what might have gone wrong. That said, when things start acting wierd, I always try a bit of maintenance first. About 95% of the time, I luck out and it works.
I use the free program Onyx. I run all the clean up routines. Then I boot to the recovery partition (Lion) or the OS X Install Disc and repair permissions and verify/repair the hard disk.
Hope this helps.

HT1941 Hi i have recently updated my version of iTunes in order to sync music from my macbook air to my new ipod shuffle. After a successful installation the application does not launch and I am unable to oepn iTunes of access my music! Someone please hel

Hi,
I have recently updated my iTunes to the latest version in order to sync music onto my new ipod shuffle. However after a successful installation the application does not launch or open? There are no error messages. The application is just unresponsive.
I have already checked the compatibility with Safari, my operating system and checked my firewall is not blocking it - all is fine.
Does anyone have any other resolutions?
Many thanks

Hi Carolyn,
Thank you for your time and response. The trouble is I am unable to launch iTunes? I have restarted my macbook air a number of times to try and initiate the application but the issue persists and the application remains unresponsive. Will not launch?
Thanks

After download itunes installation began in windowx xp near the end of the installation the message says: it was not possible to write the value to the key Software / Classes / .mpg / OpenWithList / iTunes / .exe. Already reinstalled 3 times and always sa

After download itunes installation began in windowx xp near the end of the installation the message says: it was not possible to write the value to the key Software / Classes / .mpg / OpenWithList / iTunes / .exe.
Already reinstalled 3 times and always says the same message.
thank you

Only two had virus on windows XP this week and wiped them with Avast. The itunes asked me to install the update, and so I did. but it always gives me that message.

I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer?

I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer? I was using Explorer 11 and Windows 7, installed on an HP Pavilion g series

Never heard of that being caused by installing iTunes. Try asking on a Windows forum. This isn't a problem with iTunes or any other Apple product. If you believe it is, uninstall iTunes. If the problem persists, you'll have to seek advice on a Windows forum or contact Microsoft for support.

HDR is not working after a new installation of Photoshop

After a system crash of my computer I had to reinstall all programms. In the past I made a lot of HDR pictures, I will say I know what i have to do. But after the new installation of PS when I merge some photos with HDR pro the result is much more darker then the darkest of the braketing photos, and there is no way in the ACR (adobe camera raw) to get an acceptable result. I will show you screen prints:
Do you have a solution for this?
Many thanks...

Chmeva wrote:
It also makes "a lot of noise" ("a lot" in the sense that if I put it next to my ear I can hear a lot of clicking sounds from inside) while attempting to transfer songs/sync,
This normally, is a sign that your iPod Hardisk is dying. Do the iPod Disk Diagnostic as posted by tt2. it wont fix your problem, but it will help in troubleshooting.
Have a nice day!

What are the key components to be mointored after support pack installation

I m an PI developer ,last Friday Basis installed the service pack 15 in Quality box . They are asking me to mointor the QPI to make sure everything is running fine and let them know so they can install the service pack in Production box.
Apart from normal monitoring of the system ( RWB and SXMB* ), what are the other components i need to monitor.
Can you tell me what to be monitored after Support pack installation.

Hi,
1) If CCMS is configured then you can monitor this as well (RZ20)
2) Keep an eye on Queues
Regards,
I m an PI developer ,last Friday Basis installed the service pack 15 in Quality box . They are asking me to mointor the QPI to make sure everything is running fine and let them know so they can install the service pack in Production box.
Apart from normal monitoring of the system ( RWB and SXMB* ), what are the other components i need to monitor.
Can you tell me what to be monitored after Support pack installation.

Help! After interrupting an installation of a program downloaded from the internet on my mac in a reboot cycle will not start, I've already done the disk check and it's ok and I reinstalled the OS 10.8 Lion

After interrupting an installation of a program downloaded from the internet on my mac in a reboot cycle will not start, I've already done the disk check and it's ok and I reinstalled the OS 10.8 Lion

In this case, I think that there's something damaged that can't be fixed just reinstalling OS X.
If you don't want to lose files, you will have to create a second partition in the hard drive and install OS X there, so you will be able to recover everything you need. Then, you will have to erase the first partition and reinstall OS X. Follow these steps:
1. Hold Command and R keys while your Mac is starting to start into OS X Recovery, and open Disk Utility.
2. You can follow the steps of this site to create a second partition > http://pondini.org/OSX/DU3.html
3. After creating the second partition, close Disk Utility and install OS X on the second partition.
4. When the installation finishes, open Finder and, in the sidebar, you will see the other partition. Open it and recover the files you need.
5. After doing that, repeat the step 1.
6. Select “Macintosh HD” in the sidebar, go to Erase tab and erase the disk.
7. Close Disk Utility and install OS X on the first partition.
After doing all of these steps (you will need a lot of time to do this), you can delete the second partition you created and add the size of this partition into the first one > http://pondini.org/OSX/DU4.html

Trouble installing Creative Cloud Desktop. After running the installer the dock the opens up is blank with a blue dotted loading emblem and will not do anything?????. New member here, thanks for the time.

After running the installer the dock the opens up is blank with a blue dotted loading emblem and will not do anything?????. I attempted to quit the install and restart but it produced the same result. New member here, thanks for the time.

Avanmanandfriends please see Creative Cloud app doesn't open and hangs on spinning progress wheel - http://helpx.adobe.com/creative-cloud/kb/creative-cloud-app-doesnt-open.html which discusses how to resolve your current error.

BO 3.1 after Xcelsius 2008 installation

Hello everyone,
I have a problem with BO 3.1 environment after Xcelsius 2008 installation. When i try to open Webi reports in InfoView (which worked fine before the installation), "Cannot execute this operation: a valid license was not found (Error: INF)" message appears.
I have applied licence codes from partner's temporary license files (Xcelsius 2008 Enterprise license and BO 3.1 Enterprise license).
I tried to unistall Xcelsius to prevent Webi reports from crashing but after that CMS is not able to start. Actually Configuration Manager shows that it works just fine but there is not a possibility to log on to it.
Anyone have some suggestions regarding this issue
PS. my system is Windows 2008 Server.
Best regards
Wojtek Materna

Thanks for the quick response Wojtek!
However, reinstallation of Xcelsius didn't work for me and removing it only made things worse so now I have redone the whole BOXI 3.1 installation and things seems to work so far. It was only a demo server so it wont be to much hassle getting content back.
Rgds
/Fredrik

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation. In OSx boot it keep Win keyboard. How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation.
Installation went well but when I boot either with OSx or Win it always keeps Windows keyboard.
How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

Hi - I have the exact same model as your MacBook and had a few questions as mine is acting up. I upgraded the ram to 8gb (2x 4GB ram) and ever since then my computer has not been running as smoothly and the start up time is horrendous. Have you encountered this problem? And if so how did you fix? What would you advise me do?
I was thinking of reverting back to the original factory 4GB then rebooting the entire computer. Any suggestions?
Thanks in advance!
Allen

How to add Oracle Partition Component after the RDBMS Installation

Hi,
I have been installed Oracle 11g R2 in Suse Linux 10 (64 bit), while in installation i deselect the Partition option. Now i need to bring the Oracle Partition option to my Oracle RDBMS.
Please help me how to bring the Partition Option once again into my Oracle Server.
Thanks in Advance,
Baalaji V

Same senario i have here, But i want to know how to install the Partition option after the RDBMS installation.
Since i have been installed the Oracle 11g R2 Ent Edition without Partition option, Now i need to install the same.
Thanks.

Problem connection to SQL Server using DG4MSQL gateway.

I am getting the following error trying to use a SQL gateway on Windows platforms:
TNSPing seems fine (which seems like listener is fine).
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from DG4MSQL
The dg4msql gateway (32 bit box, 11.2.0) exists on a separate machine from the 64 bit Oracle database (10.2.0.4)
and is trying to call a MS SQL 2005 database. The listener starts and stops fine and TNSPing from the database box returns OK.
Thanks for any advice in advance and sorry for the length of the post but I tried to show all the relevant parts. I am a newbie for sure.
The Oracle_Home is on: C:\product\11.2.0\tg_1 and that is included as the first part of the path statement (C:\product\11.2.0\tg_1\bin).
LISTENER.ORA File (running on the gateway server box)
=============================
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = clickimrs.blackfoot.com)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
ADR_BASE_LISTENER = C:\product\11.2.0\tg_1
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC=
(SID_NAME=dg4msql)
(ORACLE_HOME=C:\product\11.2.0\tg_1)
(PROGRAM=dg4msql)
initdg4msql.ORA file (exists in C:\product\11.2.0\tg_1\dg4msql\admin on gateway box)
====================================
# This is a customized agent init file that contains the HS parameters
# that are needed for the Database Gateway for Microsoft SQL Server
# HS init parameters
HS_FDS_CONNECT_INFO=[MG-FM]/MG-FM/Blackfoot_OasisFM
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
TNSMAMES.ORA (running on the database server box)
=======================================
dg4msql =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=CLICKIMRS.blackfoot.com)(PORT=1521))
(CONNECT_DATA=(SID=dg4msql))
(HS=OK)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
SQLNET.ORA (running on the database server box)
=====================================
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
My create dblink statement:
====================================
create public database link dg4msql connect to "Axiom" identified by "ax" using 'dg4msql';

listener status from listener on Gateway machine:
==============================================================
C:\Documents and Settings\tiefentr>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 20-OCT-2010 13:24
:06
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=clickimrs.blackfoot.com)
(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 20-OCT-2010 11:47:47
Uptime 0 days 1 hr. 36 min. 19 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\product\11.2.0\tg_1\network\admin\listener.ora
Listener Log File c:\product\11.2.0\tg_1\diag\tnslsnr\clickimrs\listener
\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=clickimrs.blackfoot.com)(PORT=1521))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
Services Summary...
Service "dg4msql" has 1 instance(s).
Instance "dg4msql", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
===================================================================
TNSPING from HOST machine housing Oracle DB:
C:\Documents and Settings\tiefentr>tnsping dg4msql
TNS Ping Utility for 64-bit Windows: Version 10.2.0.4.0 - Production on 20-OCT-2
010 13:20:21
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
C:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=CLICKIMRS.black
foot.com)(PORT=1521)) (CONNECT_DATA=(SID=dg4msql)) (HS=OK))
OK (60 msec)

Reapplying patchset 10.2.0.5 after dg4msql gateway installation

Similar Messages

Maybe you are looking for