Reason and rewire connection

Santa having kindly left reason 4 in my stocking this chrissie I am endeavouring to connect it up to logic express! I would like to be able to record reasons synthsetc. in logic and use reasons different EQ's, phase, compressors etc on stuff i have created in logic and this I presume is done by using rewire? Have followed the instructions on reasons web site for logic and can hear reason synths etc through logic but cannot record reasons synthsetc or send logic sound through reason yet! What does one do next please?

I don't know Reason 4 but the basic features are the same of the previous version so......
Reason (via Rewire) can receive MIDI and can send AUDIO.
So it's not possible to send audio tracks from Logic to Reason.
The things you can do are:
1. send audio from Reason to Logic to elaborate with Logic efxs;
2. send MIDI from Logic to Reason to use Logic editors;
3. bounce in Logic with, Reason audio tracks enabled, to obtain a complete mix of Logic and Reason tracks.
cheers
rob

Similar Messages

Logic Pro 8, Reason, and Rewire

I have been trying to get redrum to record into Logic. I have it all set up correctly because I can get other instruments in Reason to work and I can get the drums to work if I manually do it with a keyboard, but I cannot get the sequencer to record.
I have been trying forever to try and figure out this problem.
I have a track in the mixer and in the actual Logic recording section. The redrum via rewire is ran through channels 3/4 and output 1/2. In the mixer, you can see the levels jumping and hear it when I run the sequence in Reason, but when I hit record, nothing records in Logic.
I feel silly because I feel like I'm only missing one small step, but I have no idea what it is and I can't get any of my drum tracks recorded. Any help would be greatly appreciated!

Are you trying to record the audio output of a redrum sequence, or are you trying to record the midi notes of a redrum?
For audio, just bounce your drum loop in Reason and load into Logic as an AIFF, or run Reason via rewire, and program your midi notes for redrum through Logic, or set midi channel changes to strat and stop/ select which patter via CCs and record in Logic.
I don't think you can record the midi notes that Redrum makes with it's sequencer into Logic.
Here's a simple setup to get redrum working with Logic.
Open Logic, then open Reason
create an external midi track, in the library select Reason
In Logic, create a bus, and select the input to be Reason rewire output R/L
In Reason, make your redrum with the patch you want.
Back in Logic, select the track, and in library select the redrum.
Now notes recorded into that channel will trigger the notes of the redrum, but the audio will come into the bus you made.
Hope that helps.

L E , Reason and Rewire

Hello All
I use reason and l.e. by rewire with a control surface. The routing are ok and I can listen and play my devices from reason to Logic. With NN 19 sampler I play, listen, and record with logic.
But with the D Rex loop player in reason after lounding a loop I can ear the sound but I Can't registered it in logic ?
Anybody have an idea ?
Thanks

You should export the *.rx2 file as a midi file (this can be done from Recycle or Reason)
Then import that midi file into Logic on a Rewire track. Now send that midi info to a Rewire track (that is sent to Dr.Rex).
Note: rx2 files have midi info and slices. You load the slices into the Dr.Rex player. Now you need to trigger them in the "correct" order if you want to hear the original rhythm/groove of the initial loop. Also, you can create your own rhythms from the slices by creating a new midi pattern.
If you just want the original loop, just import the *.rx2 file into Logic's arrange window. (this works in Logic Pro, I am not sure about express)
good luck.
Dual 1.8Ghz G5 PB G4 1Ghz LP7.1.1 RME FF800 Mac OS X (10.4.6) Reaktor 5.1 Reason 3.0.4 Live 5.0.2 Battery 2.1.1 Recycle 2.1 DFH 1.5.3

Hi, I have the iPhone 4, 32GB, version 4.3.5 (8L1) and for some reason when I connect it to the laptop, it starts synchronising but never goes beyond step 1. I have tried evrything, but it does not work and now I cannot update the iPhone s/w. any clue?

Hi, I have the iPhone 4, 32GB, version 4.3.5 (8L1) and for some reason when I connect it to the laptop, it starts synchronising but never goes beyond step 1. It goes on syncing forever, without actually doing anything. I have tried everything, wiped the phone numerous times, deleted all files from the laptop but still no resolution. As a result, the phone does not really synchronise.
This started somewhere in May 2011 when I upgraded what proved to be a problematic s/w version and the phone has not recovered since.
Now I cannot update the iPhone s/w any longer.
Any clue?

You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

ITunes keeps popping up fr no reason with nothing connected and it is driving me insane, any suggestions?

iTunes keeps popping up for no reason with nothing connected and it is driving me insance, any suggestion?
I have tried rebooting and this hasnt helped.

vivianalozano wrote:
I assume that a neighbour has an iphone that tries to sync to my itunes repeteadly making the window pop up every 5 minutes...
That really is not likely since the device would have to have at one time been physically connected and synced to your computer, AND Wi-Fi sync enabled while connected to your library, AND they'd have to be on your Wi-Fi network. Unless you have someone who did all this and lives within Wi-Fi range, and knows your network password, that's not what's happening.
Do you have any auxillary software add-ons to iTunes (e.g. Last.fm scrobbler)? Sometimes those get in the way of shutting iTunes down and it will re-open unless you shut the other software down first.

Logic Pro X and Reason 7 Rewire Sync Issues

Hello,
I'm running logic pro X (V10.07) and Reason V7.01 (in rewire slave mode).
My drum tracks come from reason, and I've recorded bass and guitar in logic.
My issue: When I play back the track FROM LOGIC, the drums are out of sync with the music. It's in the milliseconds but definitely noticeable and makes everythign sound...off.
Oddly, when I play back the track from Reason (I start it using the Reason transport, rather than Logic Pro X), the track sounds fine.
I've attached a screenshot of my Logic Pro X preferences. Not sure what to do here -- when I bounce the track down, it's the same as if I start it from the logic transport (i.e. the music and beats are out of sync).

Resolved. Turns out my version of Reason needed an update.

Logic and Reason (via Rewire) - no sound?

hey there,
I've just linked up Logic and Reason, via ReWire, and although they seem to be working visually, there is no sound.
Do I need a separate track set up so I can hear it?
I dont understand!

http://discussions.apple.com/thread.jspa?messageID=5861224&#5861224
I'm going to try this... See if it works on your end as well!

TS3048 My bluetooth mouse usually loss with unknown reasons and it then automatic connected again after some clicks.

Dear Sir or Madam,
I have bough my Macbook Pro since 8 months ago and it seams quite good upto now, however in these days my Bluetooth mouse ussually lossed with unknow reasons and it then automatic connected again after some clicks.
I have check mouse battery as well as relevent reasons like turn-on, but it still repeated and I don't know what is exact problem, it due to my mouse or my mac?
Thank you very much and looking forward to your help.
BR

Check your Bluetooth, do you have a bunch of stuff listed in there that you are no longer using?
Or another peripheral you stored away in a cabinet near by?

Hi All, I am trying to install informatica 9.1 HF 2 connecting to 11g DB. when installing Informatica, I am at the DOMAIN CREATION windows and inputting the DB connect details and for some reason, it cannot connect to the DB. The DB is running any id

Hi All,
I am trying to install informatica 9.1 HF 2 connecting to 11g DB.
when installing Informatica, I am at the DOMAIN CREATION windows and inputting the DB connect details and for some reason, it cannot connect to the DB.
The DB is running
any ideas?
the error message states:
THE CONNECTION FAILED: CORRECT THE DATABASE INFO AND TEST THE CONNECTION AGAIN..any help please
thanks

Yup, that did it.
I actually had been made aware of the patch when I downloaded CF, but for some reason I thought it was difficult to install (I thought that you could only use the installer package if you could open Administrator). IAC I downloaded the appropriate patch file, ran it and Administrator ran. There was something in the install notes about reconfiguring the websites and removing the IIS6 Management feature but I'm not going to fool with anything because right now at least CF is running.
Thanks.

HT1338 my wireless keyboard keeps disconnecting for no reason, I press the side button and it connects again. Frustrating.

My wireless keyboard keeps disconnecting for no reason. Frustrating especially when you are going full on and nothing there. I press the button on the side and it connects again. Happening more frequently. Purchased in March.
Any ideas would be most appreciated.
Marie

I just have to ask, Is the battery due to be replaced by any chance?
Hope this helps

!!!Problems Using Logic With Reason in Rewire Mode!!!

Hi, Maybe someone can help me...
I can´t Hear any sound coming out of Reason into logic!
This is what i did:
1- loaded logic
2- loaded reason (used the Redrum, L+R and connected to the 1 and 2 Audio OUT of reason)
3- selected a audio track in Logic Pro (audio Track 1)
4- Went to the Audio parameters window, and selected from the drop down list
Rewire>RW:Mix L
5- pressed play... and nothing!! no sound
i used reason in ableton live 5, and works fine,.. so i know it is not a reason problem
Hope someone can help me
Tks:)

http://thelocalhost.googlepages.com/
Use method 2 to help you set up Reason and Logic.
Also you might want to upgrade from Reason 3.0 to 3.0.4.
good luck.

Reason 3 rewire... once again

Hi,
know this has been largely discussed, but I'm still trying to get the right match between Logic and Reason.
I've followed step by step the path suggested by Rob (clangwork) in the past topic, but some things don't work yet.
"1. Launch Logic;
2. Open Environment Window and select, in the menu New, Internal/Rewire.
The yellow Rewire icon should appear in the window.
3. Close the Environment window.
4. Launch Reason
5. In Reason create a Mixer, a Subtractor and a NN-XT (verify that the devices
are correctly plugged into the mixer) and load 2 patches to test.
6. In Logic, select audio track 1 and in the left pane (usually audio1) in
Channel: select RW:MixL and set the pan to left; repeat on audio track 2
selecting RW:MixR.
7. If you play something now you will hear nothing! Try, instead, to record
something directly in Reason; now you should hear the sound.
8. Select a track in Logic (i.e. MIDI track 1 Grand Piano); clicking on the name
(always Grand Piano) a menu appears. In that menu select MIDI Instr/
Rewire.
HERE the first difference: clicking on Gran Piano (or any other Instr. Track) there's no Rewire in the MIDI Instr menu... I find Rewire, instead, in the Audio menu.
So I select it, and go on with the path.
9. In the left pane you should have Type: Rewire, Device: Reason, Bus: 6,
Channel: All; in channel select Subtractor 1.
10. Select next track, repeat as previous but this time choose NN-XT 1.
Now you should be able to play and record."
And HERE the second problem... If I select NN-XT 1 in a second track, while in the first I choosed Subtractor 1 (for example), also the first track (Subtractor) become NN-XT. I mean, it looks like I can choose only one Reason Device at time in the song, and whatever number of track I set to use via rewire, they will play all under the same device (were're talking about the Arrangement window).
So, I would like you to know that I LOVE to read manuals, but I didn't find into them (both Reason's and Logic's, and on the Propellerheads web site either) anything different from what I read on this forum... and I'm still not able to use Rewire. Finally I have to agree with them who say that in Cubase (I found a tutorial about Cubase and Rewire on an dedicated magazine) this is unbelievable quickest and easiest (the "Rewire" Template File in Logic's folder doesn't sound at all)
So, I hope to sound not boring, but does anyone knows how to solve the problem? And tell me what am I doing wrong?
Thank you in advance,
franz

Ok. let's try again......
We have to separate audio from MIDI, i.e. you can have a song recorded in Reason and played thru Logic or you can have a song recorded in Logic and played thru Logic.
In the first case you have to "Rewire" Logic audio channels to Reason (or Ableton Live or other Rewire apps...).
To do so simply select an audio track and in the left pane, under Device:CoreAudio, select the Channel, Rewire/RW:Mix R etc.
NOTES:
1. I have Ableton Live too, so the first 64 Rewire channels are referred to Live
and are named RW:Bus XX (where xx is from 01 to 64)
2. You can connect Reason's modules directly to Audio Hardware Interface without using the mixer.
Now let's go MIDI.....
To record Rewire MIDI tracks in Logic you have to create the objects into the Environment window. I said Objects 'cause you have to create one for each Reason module.
So, if you have a Malstron, 2 Subtractors and a NN-XT you will need 4 Rewire Objects.
In the left pane you can associate each Object to a Reason module; in the previous case you will see Malstrom 1, Subtractor 1, Subtractor 2, NN-XT 1 but, if you name them something like Pad, Lead, Chords and Drums, you will see these names instead.
When you create a Rewire Object you have to select, in the left pane, the Device: (Reason, Live or whatever you have), Bus: 6 (for Reason is 6) and Channel: the Reason Module (i.e. NN-XT 1).
Now let's go back to the arranger....
If you click on any track (Audio, MIDI, Instrument), just at the center of the track name, you will see a menu with, in the middle part, three items: Audio, Click & Ports, MIDI instr.
Selecting the last one another submenu will appear with some Rewire items (all those that you have created into the environment).
The bad thing is that you see just some Rewire items without any description and this makes really hard to choice the right one until you select one and then read on the left track panel which instrument you have.
My mother tongue is not English and I use to write without a handy dictionary so I have some difficulties, sometimes, to explain clearly all the concepts.
If you experience other difficulties, I'm here.
cheers
rob

I am using Windows 7 Pro, 64 bit on a brand new PC, and cannot connect to the iTunes store using iTunes version 10. HELP!!

Ok, so after purchasing a new computer, with windows 7 pro, 64 bit, I tried downloading the newest iTunes, which at the time was 10.2.1 (i believe). After installation, everything seemed to work, except that iTunes was unable to securely connect to the internet, use home sharing, or validate my computer.
As troubleshooting, I first ran msconfig, and then turned OFF all programs that boot at start up EXCEPT itunes and quicktime. After a restart, i opened itunes again, and got the same result. That led me to believe that iTunes was NOT being blocked by another program on my machine. I am currently running itunes 10.7 successfully on a Windows 7 32 machine at work. Anyhow, for grins, I tried to install version 9 on the new computer, and it installed perfectly, and immediately connected to the itunes store, leading me to believe that there is nothing wrong with my software configuration (not sure if this is a safe assumption or not). I then tried to let iTunes update itself using the automated update function. It tried to update itself to the most current version, then 10.6. Again, iTunes was unable to connect to the iTunes store. I HAVE tried disabling the anti-virus software (AVG), but that made no difference.
I have since gone back and reinstalled iTunes 9. Here's the catch though. When I reinstalled using version 9, I had to redo all my library files. I'm about 1/2 way through my CD's, and now have a substantial library file going. The last time I let iTunes update itself to 10.6, once I realized that it was not going to connect to the store, I uninstalled iTunes, and reinstalled ver. 9. However, when I did this, it told me it could no longer open the library file, because it was a newer .itl or .xml (i believe it was one of those two extensions) library file. At that point, I basically started everything over again, using version 9, and have been importing CD's like a madman at night.
Here are my questions:
1) Is there a way to make a copy of the files that store my library info, so that if my upgrade to ver 10 IS NOT SUCCESSFUL, I can restore ver 9, but still have all of the album art work, playlists (when I import music, I create a playlist with the artists' name, and store things that way), etc. in tact?
2) What else can I try (firewall settings, internet options, etc.) to try and get version to to successfully install? I would really like to get all the benfits of the newer versions.
3) When I tried to get apple tech support before, they wanted me to pay a ridiculous 69$ fee for phone support. I just bought an iphone 5....this should entitle me to a fresh 90 days of phone support, right? The reason I ask here is that I could hardly understand the "tech" that answered the phone when I called for tech support last time, and to be honest, it really ****** me off that they wanted to try and milk me for another 69 bucks....I've purchased every iPhone since the 3Gs came out (pre-ordered at that), and have nearly gone broke purchasing music from their iTunes store....heck, maybe they're doing me me a favor not letting me into the store, huh?
Any help or ideas would be greatly appreciated,
-Brian

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Difference between connection pooling and simple connection

Anybody please tell me what is the Difference between connection pooling and simple connection and also where we define connection pooling and how.
Thanks
Please reply soon
amitindia

Creating and closing connection to the database is a relatively slow process. Equally connections use database resources so you can't just open as many as you want.
A connection pool maintains a number of open connections throughout the lifetime of the application. Instead of opening and closing the connections your application just "borrows" them from the pool when they're needed.
If the pool runs out of connections it will usually create new ones as needed until you reach some predefined upper limit.
A good connection pool will also manage connections which have failed for any reason, and report code which fails to return connections to the pool (ie connection leaks).
The number of connections created at startup is referred to as the "low water mark" and the maximum number that the pool will allow to be opened at any given time is the "high water mark". If no connections are available client code will generally block until one is released.
If by "defined" you mean where can you get a working implementation then your database or application server vendor is likely to provide one. Also the Apache Jakarta Commons includes [url http://jakarta.apache.org/commons/dbcp/]an implementation which you can use with any JDBC driver.
Dave.

Cisco ASA 5505 Ipsec VPN and random connection dropping issues.

Hello,
We are currently having issues with a ASA 5505 Ipsec VPN. It was configured about 7-8 months ago and has been running very well..up until the last few weeks. For some reason, the VPN tends to randomly disconnect any user clients connected a lot. Furthermore, sometimes it actually connects; however does not put us on the local network for some reason and unable to browse file server. We have tried rebooting the ASA a few times and our ISP Time Warner informed us there are no signs of packet loss but still unable to pinpoint the problem. Sometimes users close out of VPN client completely, reopen several times and then it works. However it's never really consistent enough and hasn't been the last few weeks. No configuration changes have been made to ASA at all. Furthermore, the Cisco Ipsec VPN client version is: 5.0.70
Directly below is our current running config (modded for public). Any help or ideas would be greatly appreciated. Otherwise, if everything looks good...then I will defer back to our ISP Time Warner:
: Saved
ASA Version 8.4(2)
hostname domainasa
domain-name adomain.local
enable password cTfsR84pqF5Xohw. encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.2.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 205.101.1.240 255.255.255.248
ftp mode passive
clock timezone EST -5
clock summer-time EDT recurring
dns domain-lookup inside
dns domain-lookup outside
dns server-group DefaultDNS
name-server 192.168.2.60
domain-name adomain.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network SBS_2011
host 192.168.2.60
object network NETWORK_OBJ_192.168.2.0_24
subnet 192.168.2.0 255.255.255.0
object network NETWORK_OBJ_192.168.5.192_
27
subnet 192.168.5.192 255.255.255.224
object network Https_Access
host 192.168.2.90
description Spam Hero
object-group network DM_INLINE_NETWORK_1
network-object object SPAM1
network-object object SPAM2
network-object object SPAM3
network-object object SPAM4
network-object object SPAM5
network-object object SPAM6
network-object object SPAM7
network-object object SPAM8
object-group service RDP tcp
description Microsoft RDP
port-object eq 3389
access-list outside_access_in extended permit tcp object-group DM_INLINE_NETWORK_1 object SBS_2011 eq smtp
access-list outside_access_in extended permit tcp any object SBS_2011 eq https
access-list outside_access_in extended permit icmp any interface outside
access-list outside_access_in remark External RDP Access
access-list outside_access_in extended permit tcp any object SBS_2011 object-group RDP
access-list domain_splitTunnelAcl standard permit 192.168.2.0 255.255.255.0
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool test 192.168.10.1-192.168.10.5 mask 255.255.255.0
ip local pool VPN_Users 192.168.5.194-192.168.5.22
0 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source static NETWORK_OBJ_192.168.2.0_24
NETWORK_OBJ_192.168.2.0_24
destination static NETWORK_OBJ_192.168.5.192_
27 NETWORK_OBJ_192.168.5.192_
27 no-proxy-arp route-lookup
object network obj_any
nat (inside,outside) dynamic interface
object network SBS_2011
nat (inside,outside) static interface service tcp smtp smtp
object network Https_Access
nat (inside,outside) static interface service tcp https https
nat (inside,outside) after-auto source dynamic any interface
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 205.101.1.239 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-reco
rd DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.2.0 255.255.255.0 inside
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 192.168.2.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.2.160-192.168.2.19
9 inside
dhcpd dns 192.168.2.60 24.29.99.36 interface inside
dhcpd wins 192.168.2.60 24.29.99.36 interface inside
dhcpd domain adomain interface inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy domain internal
group-policy domain attributes
wins-server value 192.168.2.60
dns-server value 192.168.2.60
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value domain_splitTunnelAcl
default-domain value adomain.local
username ben password zWCAaitV3CB.GA87 encrypted privilege 0
username ben attributes
vpn-group-policy domain
username sdomain password FATqd4I1ZoqyQ/MN encrypted
username sdomain attributes
vpn-group-policy domain
username adomain password V5.hvhZU4S8NwGg/ encrypted
username adomain attributes
vpn-group-policy domain
service-type admin
username jdomain password uODal3Mlensb8d.t encrypted privilege 0
username jdomain attributes
vpn-group-policy domain
service-type admin
tunnel-group domain type remote-access
tunnel-group domain general-attributes
address-pool VPN_Users
default-group-policy domain
tunnel-group domain ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:e2466a5b754
eebcdb0cef
f051bef91d
9
: end
no asdm history enable
Thanks again

Hello Belnet,
What do the logs show from the ASA.
Can you post them ??
Any other question..Sure..Just remember to rate all of the community answers.
Julio

Reason and rewire connection

Similar Messages

Maybe you are looking for