Logic Pro X and Reason 7 Rewire Sync Issues

Hello,
I'm running logic pro X (V10.07) and Reason V7.01 (in rewire slave mode).
My drum tracks come from reason, and I've recorded bass and guitar in logic.
My issue: When I play back the track FROM LOGIC, the drums are out of sync with the music. It's in the milliseconds but definitely noticeable and makes everythign sound...off.
Oddly, when I play back the track from Reason (I start it using the Reason transport, rather than Logic Pro X), the track sounds fine.
I've attached a screenshot of my Logic Pro X preferences. Not sure what to do here -- when I bounce the track down, it's the same as if I start it from the logic transport (i.e. the music and beats are out of sync).

Resolved. Turns out my version of Reason needed an update.

Similar Messages

I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

Well, how have to determined no signal is being recieved to your mac?
Have you got something that shows the actual signal? Or have you just been trying to control a VST? What software are you using by the way?
I personnally went with a AKAI MPK25, because it's made already mapped for logic & ableton etc, so it just makes things incredibly easy.
I would suggest you return it if you can as a dead unit & perhaps look at something else a bit easier?
Otherwise, if you just want to get this working we can have a look a bit deeper.
And driver? OS X driver?

What's the best Mac to run Logic Pro 9 and above with no issues

What's the best Mac to run Logic Pro 9 and above with no issues?

Any Mac that can happily run OS X Snow Leopard 10.6.8 and Logic Pro 9.1.5.....
Note: Newer Macs cannot run Snow Leopard because SL doesn't provide hardware support for the newer hardware found in these newer Macs....
Next best combo for newer Macs is Mavericks 10.9.5 and Logic Pro 9.1.8... but it is nowhere near as efficient a combo as the previous one mentioned...

Logic Pro 8 and Reason 4

For the most part I have the 2 working well together. I am having one problem I can't figure out. When I have 1 track in Logic linked to an instrament and I play it sounds great. When I create a second track and assign a second Reason 4 instrument I can hear the first and second instruments playing at the same time.
I made sure in Reason to assign 2 different midi channels, in this case 4 and 5, I can see both midi channels lighting up in Reason when I play my midi keyboard.
What am I doing wrong?
Thanks.
-Lars

I'm having serious issues with the Rewire from Reason as well - it's as if the slaving falls off for 1 or two measures and then it will catch up again - but it essentially renders it useless. I'm not sure if it's a settings issue or if there's a bug in one of the two products? If anyone has any thoughts on why Rewire wouldn't be connecting properly please post your thoughts.
Thanks!

Logic Pro 8 and Reason 4 dealy

I have everything working fine but for some reason there is major midi delay or something. I have 3 instruments in Reason 2 instruments and one sample that is begin triggered from the NN-19.
It was working fine and then all of the sudden it would not play them together. the drum would not play for a few seconds and then suddenly I would hear all the drums come at ones like it was catching up.There seems to be some kind of midi lag or something stopping the notes. They are fine when I play them one by one but not all together.
I have a G5 2.5 Quad with 3 gigs of ram and 60 gigs of disk space left.
-Lars

Hey thanks for the quick reply..
... repair permission - *that didnt work*
... trash all logic preference -*i couldnt even get logic to open to install it so there arent any preferences yet that i saw in any folder :(*
... remove all audio units plugins component- *do you mean take them out of the folder and then try to start logic? i tried that and that didnt work either :(*
... create a new Mac os x user - *that didnt work lol :(*
... if anything of previous suggestion work:
Do a fresh new system installation - *Do you think i should try an archive and install first before i do that?*

Logic Pro X and Eleven Rack Sound Card Problem. Intermittent? MacBook Pro Yosemite. Anyone having this issue too?

Ok,
Avid Eleven Rack Audio Interface with latest firmware into usb MacBook Pro running 10.10.3 (latest Yosemite)
Logic X and the sound card do not see the Eleven Rack all the time. *Intermittently*, but more often than not, I can't select the eleven rack as my interface either in Logic X Preferences>Audio>Devices or System Preferences>sound pref as the eleven rack does not show up in either list to be able to even select it.
Real pain when you are writing and have a flow of ideas and need to get a recording down. Anyone else having this issue? I have tried both usb ports in the macbook pro and the same results.
Of course I unplug and replug the usb cable. Still nothing. I have to quit Logic Pro X and restart to even get a chance for the eleven to even show up in either list.
Once I can select it then I also have a problem with being able to record (it records and gets input not prob) but on playback their is no output (with correct output selected) so I then have to use a Logic X template where the output is set exactly the same as what I am trying currently but for some reason it works with the template on the same exact settings. Mighty pain. Any help would be greatly appreciated. I am going to try my Eleven on another computer to see what happens too but thought I would ask here.
Thanks
ejh

First make sure you are using the latest drivers...
http://avid.force.com/pkb/articles/en_US/Download/Eleven-Rack-Drivers
However the latest ones are not yet confirmed as working to OS X 10.10.3 so you may need to wait for an update from Avid....
Test and see....
Note: It's always a good idea not to update OS X or Logic Pro until after you have checked if there are working drivers for your external hardware first.. especially, in my personal opinion... in the case of Avid hardware drivers which are know to lag behind in development..

I have just purchased Logic Pro X and it doesn't seem to want to work with my Tascam us-122L sound card. Do i need to purchase a new one and if so, any advice on a reasonable priced one?

I have just purchased Logic Pro X and it doesn't seem to want to work with my Tascam us-122L sound card. Do i need to purchase a new one and if so, any advice on a reasonable priced one?

What OS do you have? Have you tried the latest drivers?
http://tascam.com/product/us-122l/downloads/
alternatives: Focusrite Scarlett 2i2, Presonus Audiobox.

Can you run Logic Pro 8 and Logic Pro X on the same machine?

Hello all!
Congratulations to us on the release of the new Logic Pro!
I am still running Logic Pro 8 (and was waiting for X to come out since I knew it wasn't too far off) but am concerned over the loss of 32-bit plug-ins with Logic Pro X (the wrapping of my old VST plug-ins alone hurts!). I've heard that installing Logic Pro X doesn't in any way gimp Logic Pro 9's usage, but can someone confirm whether or not Logic Pro X and Logic Pro 8 can operate in harmony on the same Mac?
As a bonus, is there any reason to believe that Apple would disable earlier versions of Logic Pro (such as version 8) from running on Mavericks?
I am planning my Logic Pro and Mac OS migrations! Thanks!!

Try here:
https://discussions.apple.com/community/professional_applications/logic_pro
This forum is FCP X.
Al

Logic Pro 9 and Apogee Duet

I recently upgraded to Logic Pro 9 and for some reason I am unable to record an Audio track via my sE2200a mic and Apogee Duet. I was able to do so before the upgrade. I cannot be definate that the problem occurred immediately after the upgrade, because I was not doing any audio recording for a while (I was using using loops and midi recording).
I went thru the setup manual for the Apogee Duet but the screens do not match the screen shots in the manual anymore and so I am not sure the Apogee Duet is set up properly to work with Logic Pro 9. When I sing into the mic, I see the recording levels on the Apogee Duet move so the mic seems to be working, but I cannot get any audio into Logic pro. I would appreciate it if either someone could point me in the direction of an updated manual for the Apogee Duet and/or Logic Pro that details how the Audio setup should be done, or any other ideas to stop me from pulling my hair out!
I am pretty new to Apple, Logic Pro and the Apogee Duet, so be gentle!:-)
Thank you.

Hi Ervin,
In order to be able to record the audio, you must "record enable" the audio track. There is a small button on the track labeled "R" (beside the mute and solo buttons). When you click it, it turns red, thus indicating the audio track is armed and ready to record.
Also, make sure your audio track is set to the correct input. I have my mic plugged into XLR input 2 on my Duet, so I must select "Input 2" on the audio track in Logic.
See if that works for you.

I lost my Logic Pro box and disc, I can't find my serial number. What should I do?

I lost my Logic Pro box and disc, after it upgraded to 9.1.4, it asked me about serial number, but I lost it...
I can't find my serial number. What should I do? (I baught it last year.)

Hey Rickstertw,
I think there are two ways to do this. Open Logic Pro, then in the menu tab, click on Logic Pro in the upper left hand corner, then choose About Logic Pro. Another window will come up, and you should be able to see the serial number just below your name under "Licensed to" - that is, presuming this is a licensed to you copy! :-)
If for some reason it doesn't come up there and you registered the product with Apple, then call the support number and if you can verify your information with them, they should be able to give it to you.
Regards
Joyce

HT1338 I recently purchased Logic Pro X and it fails to download. Whats the scoop?

Hi, I recently purchased Logic pro X and it fails to download. I have been trying for a week and a half.
Whats the scoop?

Hey Wade
If resuming the download does not resolve, then report the issue for further assistance.
Mac App Store: How to resume interrupted downloads
http://support.apple.com/kb/HT4485
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Thanks for using Apple Support Communities.
Regards,
-Norm G.

M-Audio Fast Track USB interface not compatible with Logic Pro X and Yosemite

Hello All!
I've been trying to simply record some guitar and vocal tracks onto the latest version of Logic Pro X. It worked before I downloaded the update of Yosemite, however now, I can't find a solution to my problem. I've tried everything! Installed new drivers onto the M-Audio and even tried to search for a later update of Yosemite. I have read a few things online about how Yosemite doesn't accept 3rd party drivers. So any USB plugged in to the macbook/mac that isn't mac based it doesn't accept.
Please can someone help me solve his issue!
Thankyou!
Felix

I know many, many of us who are running things just fine.
I have to be really honest with you Ben and say... Where are you getting that idea from because it simply isn't so.....
I have a quite large client list of Logic users from all over the world... and of those that have attempted to use Logic Pro X and Yosemite together... over 80% have had to revert back to a previous configuration because of performance and/or stability related issues...
I personally, have on test here at the studios... 7 different Macs ranging from 2010 Mac Mini i7 Servers to 2011 32GB 3.4Ghz iMacs.. to a maxed out 2013 i7 MBP to a top of the line 2014 Mac Pro and all have demonstrated issues regarding performance and stability with LPX and 10.10.x using a variety of different Audio/Midi interfaces, all of which have supposedly 10.10 compatible drivers... and all of which have no such issues running LPX under Mavericks...
Just a quick scan across the various forums.. indicates that very few people are successfully running LPX under Yosemite without performance problems.... so that's why I am asking where you are seeing 'many many people" because I am just not seeing that myself...
Cheers..
Nigel

How to uninstall Logic Pro 8 and Reinstall Logic Pro 7.2?

For numerous reasons I'd like to uninstall Logic Pro 8 and return to Logic Pro 7, the reasons for which I'd rather not discuss, as I'd like to focus on the reinstallation task.
Apple states that Logic Pro 7 still functions, but this is not entirely correct. Since many instruments were replaced, the complex 50-track songs that I painstakingly mixed on pure LP7 (prior to the upgrade) now sound completely different in LP7 post-LP8 install (as well as LP8 as you can imagine). It seems that the levels are actually different on some of the EXS and other instruments. Yes, Apple says they are richer and better, but I really don't care. I am in the middle of a CD and need to return to the state I was in prior to the upgrade.
Ultimately I'd like to reinstall Logic Pro 7 and/or its content in order to get all of my original instruments back.
Does anyone have a procedure for this? Should I uninstall Logic Pro 8 and then perform a complete reinstall of Logic Pro 7 following Apple's procedure? Or should I simply use Pacifist to replace the content files that were replaced? Will any of my preferences (plug-in settings) be lost during a reinstall? Should the rest of Logic Studio be uninstalled as well?
Thanks so much in advance.
P.S. I'm just looking for a procedure and do not wish to discuss the reasons, which you'll find all over the forums.

Scottilad wrote:
Thank you.
Regarding copying the settings, these should all be in my personal user folder, correct? My plugin settings should all reside here as I understand. Would ANY customized settings reside anywhere OTHER than my user folder? *Yes, everything should live here, but it never hurts to snoop around the other folders just in case.*
I had modified some EXS instrument settings, but did not import new ones.
Where would the personal EXS settings exist - in my user folders or elsewhere? *All exs are stored Library / Application Support / Logic or GarageBand. The audio files for instrument should be stored there as well. You will need to copy and save both the instrument file and the associated audio files*.
If I simply modified an EXS instrument within a song, my understanding is that would be a property of the song itself, correct? *Yes, if you did not save the exs instrument as new instrument, it settings are stored with the song.*
Also,
Which folders am I deleting when I "delete both versions of Logic"? *You can delete ANY and all folders associated with them. Delete them out of the Apps folder, utilities, and Application support*.
And how would I delete the new Logic 8 content - where does it reside? *The Library. Not in front of my mac so sorry I can't be more specific.*
I just spoke to Apple and they recommended an "Erase and Restore" of the entire system, and a reinstall of Logic 7 in order to get me back to where I was - do you agree? *Yes, that is the preferred method but only if you are willing or in a position to start from scratch i.e re-installing all 3rd party apps, hardware drivers ect. Remember to back up all your important files.*
Thanks!

Soundflower, Logic Pro X and Ustream

I broadcast a show on Ustream in which I play the saxophone against trax that I have
loaded into iTunes. I play the sax into an apogee USB mic. I also use that same mic
to talk to the audience while trax are playing, at which time I need to adjust the level of the track
and the mic. I’m working on a Mac Pro with Logic Pro X.
Up until now, here’s what I’ve been doing.
In Mac Audio Midi Setup:
I set the output device in Audio Midi Setup to Soundflower (2ch).
I set the input device in Audio Midi Setup to Mic.
In Logic Pro X:
In preferences I set the input device to Mic, and the output to
to Soundflower (2ch)
In Ustream:
I set the input to Soundflower (2ch)
For monitoring:
I set the Soundflowerbed desktop app to route from Soundflower to Built-in Output which I then
listen to on my headphones as I do the show.
This works, in a fashion, but is extremely awkward, in that the only way to lower the music track levels when I want to speak on the mic is by lowering the slider on iTunes.
Here’s what I want to do, but can’t yet figure out, despite many attempts:
I want to route both the iTunes and the mic into Logic Pro X.
I want to be able to mix both the mic and the trax in Logic Pro X and then
output it into Ustream for broadcast.
I also want to be able to monitor the mix though my headphones.
I’ve tried creating aggregate devices and multi-output devices but can’t seem to get what i want.
The permutations I’ve tried and the problems are too numerous and varied to list here.
But I’d appreciate any ideas on how to accomplish running a system + mic input into logic,
mixing in there, and then piping the combined trax out through Ustream.
Thanks.
david

serisony,
Make sure your router allows or has multicast enabled... as this is required..
and..
Check if you have a firewall operating either on your Mac or in your Router... (On the Mac this also includes apps like Little Snitch... and not just the OS X firewall itself.)

Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

The installer for Logic Pro 8 has a bug which keeps it from operating in Lion or Mt. Lion. Use the program Pacifist to install it.

Logic Pro X and Reason 7 Rewire Sync Issues

Similar Messages

Maybe you are looking for