Reboot script doesn't work with BOOTCD

Hi,
We do Image our Workstations with the BOOTCD which works fine. At the End,
there's a reboot command.
All worked out, we had to do some changes in the Scripts after upgrading to
ZEN7, but now the Reboot doesn't work anymore, the Workstation just waits
and needs to be reset by hand - we tried reboot, shutdown, init 6 - nothing
worked so far.
The usual reboot script seems not to work - Anybody got an idea how to
reset the workstation after imaging automatically?
Thanks

Any luck with this? We seem to have run into a similar problem. After
finishing with an image and coming back to the bash prompt, I type
"shutdown -h now" When doing so, I get the error "Can't execute command in
bin/init". If I type "shutdown", it recognizes it as a command and gives
me the switches I should use. I get this error with any of the switches.
Thanks in advance.
> Automatic Reply wrote:
> > TboRElligerM,
> >
> > It appears that in the past few days you have not received a response
to your posting. That concerns us, and has triggered this automated reply.
> >
> > Has your problem been resolved? If not, you might try one of the
following options:
> >
> > - Do a search of our knowledgebase at
http://support.novell.com/search/kb_index.jsp
> > - Check all of the other support tools and options available at
http://support.novell.com in both the "free product support" and "paid
product support" drop down boxes.
> > - You could also try posting your message again. Make sure it is posted
in the correct newsgroup. (http://support.novell.com/forums)
> >
> > If this is a reply to a duplicate posting, please ignore and accept our
apologies and rest assured we will issue a stern reprimand to our posting bot.
> >
> > Good luck!
> >
> > Your Novell Product Support Forums Team
> > http://support.novell.com/forums/
> >
>
> try reboot -f

Similar Messages

Optiplex 745 doesn't work with bootcd.iso from zdmsp1, hotpatch 3

Hi,
I installed hot patch 3 for zdm, and it gave me a bootcd.iso dated
6/13/06. Is there a newer bootcd.iso out there that I can get my hands on?
The broadcom network driver will not load, even though bcm5700.ko lives
in the /modules directory when booting to the bootcd. I tried insmod
bcm5700.ko, but that didn't help.
Any ideas?
Thanks,
Chris

Bryce Leo wrote:
> The problem is that the driver is the tg3 from broadcom the bootcd
> doesn't have the hardware and driver matched up in the modules.alias
> file. If you'd like I could provide you with an iso that with a couple
> commands will allow you to have full network in the boot cd and
> subsequently run img and image the computers. However I will only give
> you the cd if you agree that if you find an updated version of the cd
> that "just works" from Novell you tell me how to get it. Sound fair?
> If so send me an email at [email protected] I'll respond to you
> from my real email account after that. Please put zenworks in the msg
> subject.
>
Did you just try extracting the bootcd from HotPatch 3? the date should
be 2-12-2007.
To extract it see:
http://www.novell.com/support/search...200%2031249072
_-kurt

AS3.0 socket script doesn't work with flex coldfusion local server

I am having a real problem using my script in flex coldfusion
project. I tried everything I can to get an answer including
posting a question in two groups with no success.
I created a class that goes and connect through a socket
connection and it works fine under “basic” flex
project, however when I try to use the package in a flex coldfusion
project I keep getting error messages:
*** Security Sandbox Violation ***
Connection to domainName.com:60 halted - not permitted from
http://localhost:8500/ProjectName/bin/fileName.swf
Error #2044: Unhandled SecurityErrorEvent:. text=Error #2048:
Security sandbox violation:
http://localhost:8500/ProjectName/bin/fileName.swf
cannot load data from domainName.com:60. At
com.elad.as3.socket::socketConnect$iinit()[C:\CFusionMX7\wwwroot\ProjectName\com\elad\as3 \socket\socketConnect.as:14]
It looks to me that because there are two URL
http://localhost:8500/ProjectName/bin/fileName.
and
C:\CFusionMX7\wwwroot\ProjectName\com\elad\as3\socket\socketConnect.as
The player set the security in full effect and I cannot
access other servers. I tried everything including setting the
security and adding my local server to the approved servers.
This is a real problem because I will not be able to test my
application locally.
Thanks in advance for the help,

does anyone have any idea what could be going on here? am i completely out to lunch?

User scripting doesn't work with NWBC

I connect SAP Server through NWBC client.
I can see the embedded SAPGUI in it (7.20 patch 6)
When run Hit Test from embedded SAPGUI - it recognize the hit elements.
When record through Script Recording & Playback - it succeed.
But when try play the recorded script - I get a failure >> GetObject("SAPGUI") fail.
I've noticed that there's no saplogon.exe process,that is responsible for the SAPGUI running object registration.
When try to connect directly from saplogon - it works fine !!!
I assume that I need to connect the NWBC's embedded SAPGUI in a different way - can someone help with this issue ?
Best Regards,
Assaf

Dear J-Philippe,
I'm just getting started with SAP GUI Scripting through the COM interface and I seem to be running into the same issue.
You seem to be referring to a work-around mentioned in the README (#4). I don't know where the README is located, could you (or somebody else) please post the work-around or the README or location thereof?
By the way, here's the code I'm running (it's Python):
import win32com.client
wrapper = win32com.client.Dispatch("SapROTWr.SapROTWrapper")
sap_gui = wrapper.GetROTEntry("SAPGUI")
application = sap_gui.GetScriptingEngine
connection = application.FindById("con[0]") # returns /app/con[0]
session = connection.FindById("ses[0]") # throws exception
The last statement fails with an exception "The control could not be found by id".
When I use connection.Children(0) instead I get the exception "The enumerator of the collection cannot find an element with the specified index"
Same results when using SapGui.ScriptingCtrl.1.
Thanks!
Edited by: brucevdk on Jan 31, 2011 7:51 PM
I found the mentioned SAP note 1526624 somewhere (I don't yet have access to the official resource) and it made me think that perhaps I'm not dealing with the same issue. I'm also not sure what CreateObject is and if it's similar to the Dispatch functionality above (I'm just getting started with COM Programming). I'll play around with the recorder at work tomorrow to see if scripting works at all.

ARD Login script doesn't work with similar usernames

We have a lab of Macs all of which have two accounts whose usernames start with the same characters (rms and rmsadmin). There are times when we would like to be able to log on to all the computers simultaneously as the rmsadmin user with ARD. Because both of the usernames start with the same three characters, when the following commands are sent via ARD, the login process defaults to selecting the student account (rms) and won't log in as rmsadmin:
osascript -e 'tell application "System Events" to keystroke "rmsadmin"'; \
osascript -e 'tell application "System Events" to keystroke return'; \
osascript -e 'tell application "System Events" to delay 0.5'; \
osascript -e 'tell application "System Events" to keystroke "password"'; \
osascript -e 'tell application "System Events" to delay 0.5'; \
osascript -e 'tell application "System Events" to keystroke return'
Anyone have a solution to this?
Thanks in advance for taking the time to read this and giving it some thought.
Peggy
Xserve PowerPC G4, MacBook Pro, PowerBook, etc. Mac OS X (10.4.8)

Since we do have the same problem but also some additional infos I bump this thread in the hopes of getting some answers.
The login script does run, but unfortunatly only when I start it manually. It does not run during login.
The only purpose of the script is to map some drives and it works fine under XP. Where else can I find infos about the problem?
Our script looks like that:
On Error resume next
Set objADSystemInfo = CreateObject("ADSystemInfo")
Set objUser = GetObject("LDAP://" & objADSystemInfo.UserName)
strDn = objUser.Get("distinguishedName")
strSam = objUser.Get("sAMAccountName")
strCn = objUser.Get("cn")
Set colGroups = objUser.Groups
Pos = Instr(strDn,"OU=")
if Pos = 0 then
    strOu = ""
else
    strOu = Mid(strDn,Pos+3,2)
end if
Set objNetwork = CreateObject("WScript.Network")
objNetwork.MapNetworkDrive "h:", "\\frodo\user\" & strSam
objNetwork.MapNetworkDrive "j:", "\\frodo\misc"
objNetwork.MapNetworkDrive "l:", "\\frodo\department"
objNetwork.MapNetworkDrive "q:", "\\frodo\projects"
objNetwork.MapNetworkDrive "k:", "\\frodo\department\" & strOu
if strOu = "IT" then
    objNetwork.MapNetworkDrive "x:", "\\frodo\software"
end if
'WScript.Echo strOut
For Each objGroup in colGroups
    if objGroup.CN = "DreCash" then
    objNetwork.MapNetworkDrive "p:", "\\gollum\drehcash"
    end if
Next
objNetwork.MapNetworkDrive "i:", "\\192.168.1.6\shares"

The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5. My old android phone worked perfectly with my car. Even the tech guy at Lexus couldn't get it to work. What is apple doing to fix this.

The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5. My old android worked perfectly with my car. Even the tech specialist at Lexus couldn't get it to work. Lexus said that other iPhone 5s were having the same problem. What is apple doing to fix this?

Going to the local Apple store this morning...
My problem is not uncommon as the board is showing signs of this happening to many others as well. That is where I found the restore and reboot information to try to solve the issue of crashing apps.
I understand that Apple will not "give away the cow", but letting iPhone users know that the problems they are having are being addressed by Apple is a little more comforting than nothing at all. Other wise, all the apps in world are useless and even more importantly worthless, if a person has to reset/reboot/reload just to get them to work.
IF Apple can not address the basic problems with todays iPhone apps, why should one believe that the iPhone 3.0 OS is any better? Using a PC comparison, which is better, XP or Vista. If the current iPhone OS of 2.2. what ever is not working that well (as related to down loaded apps and iTunes), will OS 3.0 be any better?
The waste of time I refer to is in going to the apps store and downloading the apps... Again why by apps if the free version does not work?

Mail.app redirect script doesn't work

I'm trying to script a batch process to redirect selected messages in the Mail application. I found a nifty script on macosxhints.com--only one problem: it doesn't work with 10.4's Mail.
The script fails ("variable is undefined") when trying to get the result of:
redirect message with opening window
According the the Mail dictionary, redirect should return an "outgoing message". Instead it appears to be undefined, and I can't figure out how to manipulate the newly created message to change the recipient, sender, etc.
Any ideas?
G5 Mac OS X (10.4.5)

has anyone gotten this script to work with 10.4.6?
Mac OS X (10.4.6)

JSDOC framework doesn't work with JSX

Hil all,
I'm new in the developpement of indesign javascript … I'm looking for a way to generate javascript documentation.
I often use JSDOC to generate my doc but it doesn't work with JSX.
Has someone a good tool who support JSX tag like #include?
In advance, thanks you for your help

You could try http://stdbrouw.github.io/Extendables/
It's a framework for Indesign scripting that includes jsdoc (https://github.com/stdbrouw/Extendables/blob/master/doc/jsdoc.conf)
John

AT-AO-10 doesn´t work with Windows 2000

I have an AT-AO-10 board that doesn’t work with Windows 2000. I have reserved two IRQs for legacy devices (non plug and play) in BIOS. The AT-AO-10 has got assigned these IRQs, a DMA and a base address that are free, and there aren’t any hardware conflicts, but the board doesn't pass the MAX's text.
In Windows 'Information System', the board is shown in 'Forced hardware', but I don’t know that is a problem.
If the board is unplugged, error messages are the same.

Hello;
You didn't mention what version of the NI-DAQ driver you are using over there. Anyway, my suggestion to you is to uninstall the NI-DAQ driver you have installed, remove the board, reboot the machine, download and install the latest NI-DAQ version (6.9.3) from NI web site.
Try the installation with the new driver, and if that is still not working, the best bet is to try the same installation on a different machine to double check if the hardware is not defective.
Regards
Filipe A.
Applications Engineer
National Instruments

New Thunar doesn't work with Launchy, Chromium

After installing the new XFCE 4.8, the new Thunar now doesn't work with Launchy, or Chromium. I haven't tried any other GUI programs that launch the file manager (Gnome-Do, Docks etc), but the only way to launchy Thunar now is via the XFCE Panel, or the desktop (via XFCE programs themselves, in essence).
I've tested this, and opening a normal folder or file with Launchy means nothing happens. I'm guessing that Launchy is using Thunar here to launch the folder/file, and it's not working. For some reason though, I can launch in /usr/bin, which I'm guessing might be because Launchy doesn't use Thunar for that (only guesses though)? Meanwhile, Chromium downloads can't be opened, and the directory that contains the download can't be opened either. When I click the button that launches the download, or opens the directory containing the download, nothing happens.
I have tried reinstalling Launchy and Thunar, to no avail. I haven't tried downgrading Thunar, but that's a process I'd rather not go through.
Last edited by louis058 (2011-01-22 21:22:50)

Hi!
I don't know Launchy, but Chromium use xdg-open script for figure out which DE (Desktop Environment) is running and then, launch the properly file manager. With the new version of XFCE, this script doesn't detect XFCE and consider a generic DE. There are many solutions, but I just modified the xdg-open script (/usr/bin/xdg-open) and replaced the line:
elif xprop -root _DT_SAVE_MODE 2> /dev/null | grep ' = \"xfce4\"$' >/dev/null 2>&1; then DE=xfce;
by a more logical line:
elif [ "$DESKTOP_SESSION" = "xfce" ]; then DE=xfce;
. It isn't the best solution because will be a new update for xdg scripts, I guess.
For Launchy, you can launch it in a terminal and see if say some kind of error, like Chromium did.
Cheers!
Last edited by Versuchen (2011-01-30 16:43:25)

Keyconfig doesn't work with FF 24.0. Is there a way?

I have just completed rebuilding my PC from a hard disk format. In doing so, I loaded the latest FF 24.0.
Part of my essential application was a script that used keyconfig to cause Easy Copy to send page source to the clipboard, where the script parses it. Unfortunately, keyconfig does not work with FF 24.0.
The write-up for Easy Copy starts to explain how to make it act on a key combination, rather than on mouse action without using keycopy - but then says how it doesn't need to, because it's too much effort, and besides - keyconfig exists and does the job - which, I agree, it used to, very well - but it doesn't any more.
What to do? If there is no other way, can I get a downgrade of FF that works with keyconfig?
There is a new add-on, key config (note the space), but it doesn't do what keyconfig did.

Hmmm...
The first time I loaded it was through the FireFox Add-ons tool, so that was the natural mechanism to use to do it again. Even now, it is listed on the tool - but a notice comes up saying that it doesn't work with FF 24.0. Before getting help from you, I was on the point of downgrading FireFox to be able to use the add-on with an older version.
Another solution to my problem (possibly a better one) would be if the writer of Easy Copy would give instructions for making a key combination to cause his add-on to respond to the keyboard without the intervention of keyconfig - hence only one add-on would be needed instead of two. He has made hotkeys for two of his functions - to copy the URL to scratchpad, for example, but there is no hotkey to copy the page source. I was going to suggest it on his web site, but it doesn't accept input.

I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

Mike wrote:
> Could someone tell me why this prototype-based lightbox
seems to work on one
> of my sites but not on the other?
>
> I literally took the exact same .js & css files,
copied them over from one
> site to the other, but it's only partially working on
the new site.
>
> Works :
>
http://www.roxanacampagiorni.com/
>
> Doesn't work :
>
http://www.vilverset.com/sample.html
>
> Been troubleshooting this one for days, and I'm stumped.
Script wants
> nothing to do with lightboxing HTML files on the new
site. Only straight
> JPGs. But it was written to work with them, and it
*does* work with them
> just fine on the *other* site.
>
> Where is the anomaly between the two sites that's
causing it to break in
> sample.html?
>
>
Not sure if this is relevant but on the page that works you
have these
js files linked - 4.....
<script type="text/javascript"
src="/scripts/jscripts.js"></script>
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
and on the page that doesn't - 3......
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
HTT
chin chin
Sinclair

Trying to load illustrator 6cs onto new mac and the old activation code for my ill cs doesn't work with it

Trying to load a downloaded version of illustrator 6cs onto new mac and the old activation code for my illustrator cs doesn't work with it. Do I need a new code or am I missing something? Same goes for my Photoshop cs.

you need your serial number.
if you purchased from or registered with adobe check your account, https://www.adobe.com/account.html

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

Reboot script doesn't work with BOOTCD

Similar Messages

Maybe you are looking for